INA128PA vs INA2126PA Comparaison
Comparaison détaillée côte à côte de INA128PA par Texas Instruments et INA2126PA par Texas Instruments. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Texas Instruments
INA2126PA - Dual 36V Micropower Instrumentation Amplifier | Texas Instruments
INA2126PA ✓ ActifComparaison des spécifications
| Paramètre | INA128PA | INA2126PA |
|---|---|---|
| Marque | Texas Instruments | Texas Instruments |
| Catégorie | Amplifier ICs | Amplifier ICs |
| Statut du cycle de vie | Actif | Actif |
| Product Type | Precision instrumentation amplifier | Dual precision instrumentation amplifier |
| Architecture | Three-op-amp instrumentation amplifier | Two-op-amp instrumentation amplifier |
| Number of Circuits | 1 circuit | — |
| Boîtier | 8-pin PDIP | 16-pin PDIP |
| Common-Mode Rejection Ratio | 130 dB | — |
| Minimum Common-Mode Rejection | 120 dB | — |
| Courant de repos | 700 µA | 175 μA per channel |
| Maximum Input Offset Voltage | 50 µV | — |
| Maximum Input Voltage Drift | 0.5 µV/°C | — |
| Maximum Input Bias Current | 5 nA | — |
| Input Protection | ±40 V | — |
| Supply Range | Up to ±18 V | — |
| Gain Range | 1 to 10,000 | — |
| Gain Setting | Single external resistor | — |
| Bandwidth at Gain 100 | 200 kHz | — |
| Green Product | Yes | — |
| Restricted Substances | No Sb/Br | — |
| Température de fonctionnement | -40°C to +85°C | — |
| Type de montage | Through-hole | Through-hole |
| Number of Channels | — | 2 channels |
| Supply Voltage Range | — | ±1.35 V to ±18 V |
| Maximum Supply Voltage | — | 36 V |
| Offset Voltage | — | 250 μV |
| Gain-Bandwidth Product | — | 200 kHz |
| Input Type | — | Differential input |
| Package Type | — | Through-hole PDIP |
| Application Category | — | Precision differential-signal acquisition |
| Portable Operation | — | Supported by low quiescent current |
| Statut RoHS | — | [DATA_NEEDED: RoHS status] |
| REACH Status | — | [DATA_NEEDED: REACH status] |
| Lead-Free Status | — | [DATA_NEEDED: lead-free status] |
| Plage de température de fonctionnement | — | [DATA_NEEDED: operating temperature range] |
| Gain Set Resistance | — | [DATA_NEEDED: gain-set resistor requirements] |