NE5532P vs NE5532AN Comparação
Comparação detalhada lado a lado de NE5532P por Texas Instruments e NE5532AN por onsemi. Compare especificações principais, parâmetros elétricos, encapsulamento, status do ciclo de vida, preços e disponibilidade para determinar o melhor componente para os requisitos do seu projeto.
Comparação de especificações
| Parâmetro | NE5532P | NE5532AN |
|---|---|---|
| Marca | Texas Instruments | onsemi |
| Categoria | Amplifier ICs | Amplifier ICs |
| Status do ciclo de vida | Ativo | Ativo |
| Amplifier Count | 2 amplifiers | 2 amplifiers |
| Product Type | Dual low-noise operational amplifier | Dual low-noise operational amplifier |
| Maximum Supply Voltage | 30 V | — |
| Supply Voltage Range | ±5 V to ±15 V | — |
| Unity-Gain Bandwidth | 10 MHz typical | — |
| Slew Rate | 9 V/µs typical | [DATA_NEEDED: slew rate] |
| Equivalent Input Noise Voltage | 5 nV/√Hz typical at 1 kHz | — |
| Common-Mode Rejection Ratio | 100 dB typical | — |
| High DC Voltage Gain | 100 V/mV typical | — |
| Peak-to-Peak Output Voltage Swing | 32 V typical with VCC = ±18 V and RL = 600 ohm | — |
| Input Offset Voltage | 4000 µV maximum | [DATA_NEEDED: input offset voltage] |
| Process Technology | Bipolar | — |
| Encapsulamento | 8-pin PDIP (P) | 8-DIP, 0.300 inch (7.62 mm) |
| Tipo de montagem | Through hole | Through-hole |
| Temperatura de operação | 0 °C to 70 °C | — |
| Primary Application | Audio | — |
| Status RoHS | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| Compensation | — | Internally compensated |
| Gain-Bandwidth Product | — | 10 MHz |
| Supported Supply Voltage | — | ±5 V to ±15 V |
| NE5532x Commercial Temperature Range | — | 0°C to 70°C |
| SA5532x Industrial Temperature Range | — | -40°C to +85°C |
| Input Noise Density | — | [DATA_NEEDED: input noise density] |
| Input Bias Current | — | [DATA_NEEDED: input bias current] |
| Output Voltage Swing | — | [DATA_NEEDED: output voltage swing] |
| Output Current | — | [DATA_NEEDED: output current] |
| Total Harmonic Distortion | — | [DATA_NEEDED: total harmonic distortion] |