NE5532P vs NE5532AN Karşılaştırma
Ayrıntılı yan yana karşılaştırma NE5532P tarafından Texas Instruments ve NE5532AN tarafından onsemiAnahtar özellikleri, elektriksel parametreleri, ambalajı, yaşam döngüsü durumu, fiyatlandırma ve mevcudiyeti karşılaştırarak tasarım gereksinimleriniz için en iyi bileşeni belirleyin.
Özellik Karşılaştırması
| Parametre | NE5532P | NE5532AN |
|---|---|---|
| Marka | Texas Instruments | onsemi |
| Kategori | Amplifier ICs | Amplifier ICs |
| Yaşam Döngüsü Durumu | Aktif | Aktif |
| Amplifier Count | 2 amplifiers | 2 amplifiers |
| Product Type | Dual low-noise operational amplifier | Dual low-noise operational amplifier |
| Maximum Supply Voltage | 30 V | — |
| Supply Voltage Range | ±5 V to ±15 V | — |
| Unity-Gain Bandwidth | 10 MHz typical | — |
| Slew Rate | 9 V/µs typical | [DATA_NEEDED: slew rate] |
| Equivalent Input Noise Voltage | 5 nV/√Hz typical at 1 kHz | — |
| Common-Mode Rejection Ratio | 100 dB typical | — |
| High DC Voltage Gain | 100 V/mV typical | — |
| Peak-to-Peak Output Voltage Swing | 32 V typical with VCC = ±18 V and RL = 600 ohm | — |
| Input Offset Voltage | 4000 µV maximum | [DATA_NEEDED: input offset voltage] |
| Process Technology | Bipolar | — |
| Paket | 8-pin PDIP (P) | 8-DIP, 0.300 inch (7.62 mm) |
| Montaj Türü | Through hole | Through-hole |
| İşletim Sıcaklığı | 0 °C to 70 °C | — |
| Primary Application | Audio | — |
| RoHS Durumu | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| Compensation | — | Internally compensated |
| Gain-Bandwidth Product | — | 10 MHz |
| Supported Supply Voltage | — | ±5 V to ±15 V |
| NE5532x Commercial Temperature Range | — | 0°C to 70°C |
| SA5532x Industrial Temperature Range | — | -40°C to +85°C |
| Input Noise Density | — | [DATA_NEEDED: input noise density] |
| Input Bias Current | — | [DATA_NEEDED: input bias current] |
| Output Voltage Swing | — | [DATA_NEEDED: output voltage swing] |
| Output Current | — | [DATA_NEEDED: output current] |
| Total Harmonic Distortion | — | [DATA_NEEDED: total harmonic distortion] |