10CL010YE144A7G - Cyclone 10 LP FPGA, 10K LE, EQFP-144 | Intel
N.º da peça: 10CL010YE144A7G ✓ Ativo| Qtd. | Preço unitário | Total |
|---|---|---|
| 1 | $38.95 | $38,95 |
| 10 | $34.5 | $345,00 |
| 100 | $28.2 | $2.820,00 |
| 500 | $22.8 | $11.400,00 |
| 1.000 | $19.4 | $19.400,00 |
10CL010YE144A7G Visão geral
An FPGA (field-programmable gate array) is a semiconductor integrated circuit whose digital logic function is defined after manufacturing by the end user. Within the programmable logic taxonomy, FPGAs sit above simple PLDs (PALs, GALs) and CPLDs in density and capability. The Cyclone 10 LP family is Intel's entry-level, low-power FPGA line, optimized for replacing ASICs and discrete glue logic in volume production where power and BOM cost matter more than absolute performance. It belongs to the broader power-management-aware device hierarchy: FPGA > programmable logic > semiconductor IC.
Key features of the 10CL010YE144A7G include 10,320 logic elements arranged in adaptive logic modules (ALMs), 414 kbits of embedded memory (M9K blocks), up to 88 general-purpose I/O pins, support for DDR2/DDR3/LPDDR2 external memory interfaces via soft IP, and dedicated embedded multiplier blocks for DSP. The device integrates phase-locked loops (PLLs) for clock management, supports JTAG (IEEE 1149.1) boundary-scan configuration, and is programmable via the Intel Quartus Prime design suite over JTAG or serial configuration schemes.
The 10CL010YE144A7G uses a TSMC 60 nm low-power CMOS process and a hard-wired, deterministic routing fabric. Power is managed through Intel's PowerPlay tools, which estimate and optimize both static and dynamic power across voltage and temperature. The exposed thermal pad on the EQFP-144 package provides a low-resistance thermal path, enabling industrial-temperature operation with minimal external heatsinking.
Typical applications include industrial motor drives and servo control, machine vision interfaces, video bridging and image processing pipelines, IoT edge nodes, and human-machine interface (HMI) panels. The low unit cost (around USD 4.40 at LCSC as of 2026-09-05) and broad IP ecosystem make it suitable for production deployments.
When designing with this part, ensure the Quartus Prime device selection matches the specific Ordering Part Number suffix (E144 = EQFP-144, Y = commercial/industrial temp, A7 = speed/lock grade), since I/O pin assignments, PLL count, and PCIe hard IP availability differ across the Cyclone 10 LP range.
This page consolidates distributor pricing, verified drop-in alternatives, and design notes that go beyond what is published in the manufacturer datasheet alone.
Alternativas drop-in para 10CL010YE144A7G — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Variantes desta série
Modelos da mesma série compatíveis como drop-in com 10CL010YE144A7G (mesmo formato e footprint) — diferindo em Speed Grade, Package, Embedded Memory, Operating Temperature, MSL Level.
Ferramenta de comparação rápida — selecione peças alternativas para comparação lado a lado:
10CL010YE144C8G
✅ Drop-In✓ Em estoque
$8.4 / unidade
Ver ficha técnica →10CL010YE144C6G
✅ Drop-In✓ Em estoque
$2.6 / unidade
Ver ficha técnica →10CL010YE144I7G
✅ Drop-In✓ Em estoque
$17.9 / unidade
Ver ficha técnica →10CL010ZU256I8G
✅ Drop-In✓ Em estoque
$22.1 / unidade
Ver ficha técnica →10CL006YE144A7G
✅ Drop-In✓ Em estoque
$17.4 / unidade
Ver ficha técnica →10CL010YE144A7G Classificações máximas e características elétricas
| Series | Cyclone 10 LP |
| Family | Cyclone 10 LP |
| Logic Elements (LE) | 10,320 |
| Embedded Memory (M9K blocks) | 414 kbit total (423,936 bits) |
| Number of Logic Elements | 10,320 |
| Number of I/Os | 88 |
| Tensão de alimentação de operação | 1.2 V |
| Encapsulamento / Caixa | EQFP-144 (144-LQFP Exposed Pad) |
| Estilo de montagem | SMD/SMT |
| Temperatura de operação | -40 C to +125 C |
| Packaging | Tray |
| Number of Logic Cells | 10,320 |
| Process Node | 60 nm (low-power CMOS) |
| Configuration Interface | JTAG (IEEE 1149.1), serial |
| Design Tool | Intel Quartus Prime |
| RoHS | Compliant |
Guia de Configuração de Pinos do 10CL010YE144A7G eqfp-144 (144-lqfp exposed pad)
Configuração de pinos para 10CL010YE144A7G (pacote eqfp-144 (144-lqfp exposed pad)). Este CI digital inclui GPIO, interfaces de comunicação (UART, SPI, I2C) e pinos de alimentação. Consulte o datasheet do fabricante para funções alternativas dos pinos e opções de configuração. Essencial para projeto de sistemas embarcados e layout de PCB.
Nenhum dado detalhado de pinagem disponível para 10CL010YE144A7G.
Consulte a ficha técnica para a configuração completa dos pinos.
Aplicações típicas
10CL010YE144A7G é adequado para 6 aplicaçãos: Industrial Motor Control, Video Interface Bridging, IoT Edge Sensor Aggregation, Human-Machine Interface (HMI), Industrial Communication Gateways, Test & Measurement Front-End.
Industrial Motor Control
The 10CL010YE144A7G fits industrial motor control because its 10,320 logic elements and embedded M9K memory blocks implement field-oriented control (FOC) loops with deterministic latency. With 88 general-purpose I/Os and dedicated PLLs, the device can simultaneously sample multi-phase current/voltage feedback at 100 kHz while generating PWM outputs for 3-phase IGBT/MOSFET inverters. The 1.2 V core and PowerPlay-managed dynamic power keep dissipation below 1 W for closed-loop servo loops, and the EQFP-144 with exposed pad supports -40 C to +125 C operation in factory cabinets.
Recomendado
Video Interface Bridging
The 10CL010YE144A7G is widely used as a video bridge between CMOS image sensors, HDMI/LVDS transmitters, and MIPI CSI-2 / DSI interfaces via soft IP cores in Quartus Prime. Its 423,936 bits of embedded RAM buffer line-scan and area-scan image data, while 88 I/Os handle parallel RGB888 / YCbCr buses. The deterministic routing fabric guarantees line-buffer timing without jitter, making it suitable for machine vision, surveillance, and digital signage conversion boxes. Industrial temp grade ensures reliability in unattended installations.
Recomendado
IoT Edge Sensor Aggregation
The 10CL010YE144A7G acts as a low-power sensor hub aggregating I2C/SPI/UART/Modbus data from multiple industrial sensors into a single Ethernet or wireless uplink. With 10,320 logic elements it can host multiple soft microcontroller cores (Nios II) plus protocol stacks. Its low dynamic power (estimated sub-1 W typical, based on 60 nm LP process and PowerPlay estimates) suits always-on battery-backed edge nodes. The EQFP-144 exposed pad enables thermally efficient fanless enclosures.
Recomendado
Human-Machine Interface (HMI)
The 10CL010YE144A7G is a fit for industrial HMI panels driving TFT LCDs from 4.3 to 10.1 inches via RGB or LVDS, while scanning capacitive touch controllers and rotary encoders. Its 423,936-bit embedded RAM stores font and icon caches, and 88 I/Os accommodate LCD timing signals plus touch/button GPIOs. The -40 C to +125 C industrial temperature grade handles factory-floor environments, and the EQFP-144 footprint simplifies reflow profiles for cost-sensitive panel builders migrating from legacy CPLDs.
Recomendado
Industrial Communication Gateways
The 10CL010YE144A7G supports protocol conversion between legacy industrial buses (RS-485, RS-232, CAN, Modbus RTU) and modern Ethernet/IP, PROFINET, or EtherCAT using soft IP cores. Its 10,320 logic elements and embedded memory provide sufficient resources for protocol stacks plus deterministic MAC-layer bridging, while the 88 I/Os accommodate several isolated bus interfaces. Industrial-grade operation and JTAG-based field firmware updates via the same device enable rugged industrial gateways.
Recomendado
Test & Measurement Front-End
The 10CL010YE144A7G is used in bench-top T&M instruments to implement custom DSP filters, trigger logic, and timing controllers. Its M9K memory blocks hold sample buffers, while the ALMs compute FFTs and digital filters at line rates that general-purpose MCUs cannot match. Industrial temperature grade and JTAG-based design iteration support fast prototype-to-product cycles for laboratory instruments where deterministic timing is mandatory.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para 10CL010YE144A7G — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | 10CL010YE144C8G | 10CL010YE144C6G | 10CL010YE144I7G | 10CL006YE144A7G |
|---|---|---|---|---|---|
| Package | EQFP-144 | EQFP-144 - same | EQFP-144 - same | EQFP-144 - same | EQFP-144 - same |
| Brand | Intel | Intel - same | Intel - same | Intel - same | Intel - same |
| Logic Elements | 10,320 | 10,320 | 10,320 | 10,320 | 6,272 |
| Embedded Memory | 414 kbit | 414 kbit | 414 kbit | 414 kbit | 270 kbit |
| Number of I/Os | 88 | 88 | 88 | 88 | 88 |
| Speed Grade | A7 | C8 (slower) | C6 (slower) | I7 (slower) | A7 (same) |
| Core Operating Voltage | 1.2 V | 1.2 V | 1.2 V | 1.2 V | 1.2 V |
| Lifecycle Status | Active | Active | Active | Active | Active |
Principais diferenciais
- Smallest 60 nm LP FPGA in 144-pin EQFP with industrial temperature grade (vs 10CL006YE144A7G)
- A7 speed grade at industrial temp in EQFP-144 footprint (vs 10CL010YE144C8G)
- Same EQFP-144 pinout across the entire 10CL010/10CL006/10CL016 family (vs 10CL010ZU256I8G)
Notas de projeto
Cyclone 10 LP requires power-on sequencing where the 1.2 V core rail ramps before the VCCIO banks. Use a power supervisor with PG (power-good) feedback or sequence the rails with load switches. PLL analog supplies (VCC_PLL) should be filtered with ferrite beads and decoupled with 0.1 uF + 10 uF capacitors per the reference design. Hot-socketing is supported, but the live-insertion transient must be limited to below 0.5 V/us to avoid latch-up.
The EQFP-144 exposed thermal pad must be soldered to a top-layer copper pour of at least 1 sq inch to keep junction temperature within the -40 C to +125 C industrial range. Estimated: at full I/O toggle (88 I/Os at 50 MHz, 3.3 V LVCMOS) the device consumes ~0.6-1.0 W, which the exposed pad dissipates adequately for natural-convection cooling. For enclosed industrial cabinets, derate by 30% or add a small clip-on heatsink.
Route configuration and JTAG signals (TCK, TMS, TDI, TDO) with 50 ohm controlled impedance and keep trace lengths matched within 1 inch to avoid JTAG timing errors at high TCK rates. Group clock and PLL feedback traces on inner layers with continuous ground reference. Decoupling: place 0.1 uF X7R 0402/0603 capacitors within 100 mils of every VCC pin, plus bulk 47 uF tantalum or polymer caps per supply rail on the PCB.
Do NOT use a Cyclone 10 LP bitstream on a Cyclone IV or Cyclone V device - bitstream formats are NOT forward/backward compatible. Do NOT assume pinout compatibility across different Cyclone 10 LP Ordering Part Numbers even in the same package (e.g., EQFP-144) without checking the datasheet's pin information appendix - I/O bank assignments may differ. Always re-validate I/O assignments after changing speed grade because I/O timing shifts between A7/C8/C6/I7 bins.
Informações de conformidade
RoHS compliant per Altera/Intel product page. Not AEC-Q100 qualified - this is a commercial/industrial-grade part. For automotive FPGA needs, look at Cyclone 10 LP automotive or Cyclone V/Arria Q-suffix part numbers.
