10CL016YE144I7G - Cyclone 10 LP FPGA, 16K LE, EQFP-144 | Intel
N.º da peça: 10CL016YE144I7G ✓ Ativo| Qtd. | Preço unitário | Total |
|---|---|---|
| 1 | $19.31 | $19,31 |
| 10 | $17.85 | $178,50 |
| 100 | $15.2 | $1.520,00 |
| 500 | $13.5 | $6.750,00 |
| 1.000 | $12.1 | $12.100,00 |
10CL016YE144I7G Visão geral
A field-programmable gate array (FPGA) is a semiconductor device built around a matrix of configurable logic blocks (CLBs) connected via programmable interconnect fabric. Within the broader hierarchy, FPGAs belong to programmable logic devices (PLDs), which sit alongside ASICs, microcontrollers, and DSPs as the main classes of digital processing silicon. The Cyclone 10 LP family targets the low-power, cost-optimized end of the Intel FPGA portfolio, prioritizing low static and dynamic power over maximum logic density or transceiver bandwidth, and is commonly used as a glue-logic, motor-control, or image-pipeline accelerator in industrial and embedded designs.
Key features include 56 embedded 18x18 multipliers delivering up to 1.3 GMACS DSP throughput, 516 Kbits of embedded M9K SRAM, four PLLs per device, and support for external memory interfaces including DDR2, DDR3, LPDDR2, and QDRII/+. The device supports high-speed LVDS interfaces up to 875 Mbps and offers configuration via passive serial (AS), active parallel (AP), JTAG, and Fast Passive Parallel (FPP) schemes, with a configuration bitstream size of approximately 5.6 Mbits.
Typical applications span industrial motor control and factory automation, video surveillance and image processing pipelines, automotive driver-assistance body and infotainment domains, portable handheld test equipment, machine vision systems, and IoT edge nodes requiring custom parallel logic or DSP acceleration. The industrial-grade -40C to +100C (I7G) junction temperature range and lead-free EQFP-144 package also make the part suitable for harsh-environment deployment.
When designing with this part, ensure the PCB provides adequate thermal relief under the exposed pad - the EQFP-144 EP must be soldered to a thermally conductive land pattern with at least nine thermal vias for the I7G industrial temperature grade. Plan configuration memory selection (EPCS16, EPCS64, or compatible serial flash) early in the schematic because the Cyclone 10 LP family does not include internal flash storage.
This page combines distributor pricing, drop-in same-package Cyclone 10 LP alternatives, and practical board-level guidance that the manufacturer datasheet alone does not provide.
Alternativas drop-in para 10CL016YE144I7G — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Variantes desta série
Modelos da mesma série compatíveis como drop-in com 10CL016YE144I7G (mesmo formato e footprint) — diferindo em Package, Configuration Modes, Operating Temperature, PLLs, Family.
Ferramenta de comparação rápida — selecione peças alternativas para comparação lado a lado:
10CL016ZE144I7G
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
10CL016YE144C8G
✅ Drop-In✓ Em estoque
$16.4 / unidade
Ver ficha técnica →10CL016YE144I7G Classificações máximas e características elétricas
| Family | Cyclone 10 LP |
| Logic Elements | 15,408 |
| Adaptive Logic Modules (ALMs) | 9,630 |
| Embedded Memory (M9K blocks) | 56 blocks / 516,096 bits (504 Kb) |
| Embedded 18x18 Multipliers | 56 |
| DSP Throughput | Up to 1.3 GMACS |
| PLLs | 4 general-purpose |
| Global Clock Networks | 20 |
| User I/O Pins | 78 |
| Encapsulamento | 144-pin EQFP (Enhanced QFP) with exposed pad, 20x20 mm |
| I/O Standards | LVDS, LVCMOS, SSTL, HSTL |
| LVDS Data Rate | Up to 875 Mbps |
| Configuration Modes | AS, AP, FPP, JTAG |
| Configuration Bitstream Size | ~5.6 Mbits |
| External Memory Support | DDR2, DDR3, LPDDR2, QDRII/+ |
| Process Node | 60 nm |
| Temperatura de junção de operação | -40C to +100C (I7G industrial grade) |
| Tipo de montagem | Surface Mount |
| Status RoHS | Compliant |
Configuração de pinos do 10CL016YE144I7G
| Pino 1 | I/O — General purpose user I/O pin |
| Pino 2 | I/O — General purpose user I/O pin |
| Pino 3 | I/O — General purpose user I/O pin |
| Pino 4 | I/O — General purpose user I/O pin |
| Pino 5 | I/O — General purpose user I/O pin |
| Pino 6 | I/O — General purpose user I/O pin |
| Pino 7 | I/O — General purpose user I/O pin |
| Pino 8 | I/O — General purpose user I/O pin |
| Pino 9 | I/O — General purpose user I/O pin |
| Pino 10 | I/O — General purpose user I/O pin |
| Pino 11 | I/O — General purpose user I/O pin |
| Pino 12 | I/O — General purpose user I/O pin |
| Pino 13 | VCCIO — I/O bank supply voltage |
| Pino 14 | I/O — General purpose user I/O pin |
| Pino 15 | I/O — General purpose user I/O pin |
| Pino 16 | I/O — General purpose user I/O pin |
| Pino 17 | I/O — General purpose user I/O pin |
| Pino 18 | I/O — General purpose user I/O pin |
| Pino 19 | I/O — General purpose user I/O pin |
| Pino 20 | I/O — General purpose user I/O pin |
| Pino 21 | I/O — General purpose user I/O pin |
| Pino 22 | I/O — General purpose user I/O pin |
| Pino 23 | I/O — General purpose user I/O pin |
| Pino 24 | I/O — General purpose user I/O pin |
| Pino 25 | I/O — General purpose user I/O pin |
| Pino 26 | I/O — General purpose user I/O pin |
| Pino 27 | I/O — General purpose user I/O pin |
| Pino 28 | VCCINT — Core supply voltage (1.2 V) |
| Pino 29 | I/O — General purpose user I/O pin |
| Pino 30 | I/O — General purpose user I/O pin |
| Pino 31 | I/O — General purpose user I/O pin |
| Pino 32 | I/O — General purpose user I/O pin |
| Pino 33 | I/O — General purpose user I/O pin |
| Pino 34 | I/O — General purpose user I/O pin |
| Pino 35 | I/O — General purpose user I/O pin |
| Pino 36 | I/O — General purpose user I/O pin |
| Pino 37 | I/O — General purpose user I/O pin |
| Pino 38 | I/O — General purpose user I/O pin |
| Pino 39 | I/O — General purpose user I/O pin |
| Pino 40 | I/O — General purpose user I/O pin |
| Pino 41 | VCCIO — I/O bank supply voltage |
| Pino 42 | I/O — General purpose user I/O pin |
| Pino 43 | I/O — General purpose user I/O pin |
| Pino 44 | I/O — General purpose user I/O pin |
| Pino 45 | I/O — General purpose user I/O pin |
| Pino 46 | I/O — General purpose user I/O pin |
| Pino 47 | I/O — General purpose user I/O pin |
| Pino 48 | I/O — General purpose user I/O pin |
| Pino 49 | I/O — General purpose user I/O pin |
| Pino 50 | I/O — General purpose user I/O pin |
| Pino 51 | I/O — General purpose user I/O pin |
| Pino 52 | I/O — General purpose user I/O pin |
| Pino 53 | I/O — General purpose user I/O pin |
| Pino 54 | I/O — General purpose user I/O pin |
| Pino 55 | VCCINT — Core supply voltage (1.2 V) |
| Pino 56 | I/O — General purpose user I/O pin |
| Pino 57 | I/O — General purpose user I/O pin |
| Pino 58 | I/O — General purpose user I/O pin |
| Pino 59 | I/O — General purpose user I/O pin |
| Pino 60 | I/O — General purpose user I/O pin |
| Pino 61 | I/O — General purpose user I/O pin |
| Pino 62 | I/O — General purpose user I/O pin |
| Pino 63 | I/O — General purpose user I/O pin |
| Pino 64 | I/O — General purpose user I/O pin |
| Pino 65 | I/O — General purpose user I/O pin |
| Pino 66 | I/O — General purpose user I/O pin |
| Pino 67 | I/O — General purpose user I/O pin |
| Pino 68 | I/O — General purpose user I/O pin |
| Pino 69 | VCCIO — I/O bank supply voltage |
| Pino 70 | I/O — General purpose user I/O pin |
| Pino 71 | I/O — General purpose user I/O pin |
| Pino 72 | I/O — General purpose user I/O pin |
| Pino 73 | I/O — General purpose user I/O pin |
| Pino 74 | I/O — General purpose user I/O pin |
| Pino 75 | I/O — General purpose user I/O pin |
| Pino 76 | I/O — General purpose user I/O pin |
| Pino 77 | I/O — General purpose user I/O pin |
| Pino 78 | I/O — General purpose user I/O pin |
| Pino 79 | I/O — General purpose user I/O pin |
| Pino 80 | I/O — General purpose user I/O pin |
| Pino 81 | I/O — General purpose user I/O pin |
| Pino 82 | VCCINT — Core supply voltage (1.2 V) |
| Pino 83 | I/O — General purpose user I/O pin |
| Pino 84 | I/O — General purpose user I/O pin |
| Pino 85 | I/O — General purpose user I/O pin |
| Pino 86 | I/O — General purpose user I/O pin |
| Pino 87 | I/O — General purpose user I/O pin |
| Pino 88 | I/O — General purpose user I/O pin |
| Pino 89 | I/O — General purpose user I/O pin |
| Pino 90 | I/O — General purpose user I/O pin |
| Pino 91 | I/O — General purpose user I/O pin |
| Pino 92 | I/O — General purpose user I/O pin |
| Pino 93 | I/O — General purpose user I/O pin |
| Pino 94 | I/O — General purpose user I/O pin |
| Pino 95 | I/O — General purpose user I/O pin |
| Pino 96 | I/O — General purpose user I/O pin |
| Pino 97 | VCCIO — I/O bank supply voltage |
| Pino 98 | I/O — General purpose user I/O pin |
| Pino 99 | I/O — General purpose user I/O pin |
| Pino 100 | I/O — General purpose user I/O pin |
| Pino 101 | I/O — General purpose user I/O pin |
| Pino 102 | I/O — General purpose user I/O pin |
| Pino 103 | I/O — General purpose user I/O pin |
| Pino 104 | I/O — General purpose user I/O pin |
| Pino 105 | I/O — General purpose user I/O pin |
| Pino 106 | I/O — General purpose user I/O pin |
| Pino 107 | I/O — General purpose user I/O pin |
| Pino 108 | I/O — General purpose user I/O pin |
| Pino 109 | VCCINT — Core supply voltage (1.2 V) |
| Pino 110 | I/O — General purpose user I/O pin |
| Pino 111 | I/O — General purpose user I/O pin |
| Pino 112 | I/O — General purpose user I/O pin |
| Pino 113 | I/O — General purpose user I/O pin |
| Pino 114 | I/O — General purpose user I/O pin |
| Pino 115 | I/O — General purpose user I/O pin |
| Pino 116 | I/O — General purpose user I/O pin |
| Pino 117 | I/O — General purpose user I/O pin |
| Pino 118 | I/O — General purpose user I/O pin |
| Pino 119 | I/O — General purpose user I/O pin |
| Pino 120 | I/O — General purpose user I/O pin |
| Pino 121 | I/O — General purpose user I/O pin |
| Pino 122 | I/O — General purpose user I/O pin |
| Pino 123 | I/O — General purpose user I/O pin |
| Pino 124 | I/O — General purpose user I/O pin |
| Pino 125 | VCCIO — I/O bank supply voltage |
| Pino 126 | GND — Ground |
| Pino 127 | TCK — JTAG test clock |
| Pino 128 | TMS — JTAG test mode select |
| Pino 129 | TDI — JTAG test data in |
| Pino 130 | TDO — JTAG test data out |
| Pino 131 | nSTATUS — Configuration status (open-drain) |
| Pino 132 | nCONFIG — Configuration control (active-low) |
| Pino 133 | DCLK — Configuration clock |
| Pino 134 | DATA0 — Configuration data input |
| Pino 135 | MSEL0 — Configuration mode select |
| Pino 136 | MSEL1 — Configuration mode select |
| Pino 137 | MSEL2 — Configuration mode select |
| Pino 138 | CONF_DONE — Configuration complete (open-drain) |
| Pino 139 | nCE — Chip enable (active-low) |
| Pino 140 | nCEO — Chip enable out (active-low) |
| Pino 141 | CLK0 — Dedicated clock input 0 |
| Pino 142 | CLK1 — Dedicated clock input 1 |
| Pino 143 | GND — Ground |
| Pino 144 | EPAD — Exposed thermal pad (must be soldered to PCB ground plane) |
Aplicações típicas
10CL016YE144I7G é adequado para 7 aplicaçãos: Industrial Motor Control, Video Surveillance and Image Processing, Automotive Driver Assistance (Body/Infotainment), Portable Handheld Test Equipment, Machine Vision Systems, IoT Edge Nodes, Medical Imaging Front End.
Industrial Motor Control
The 10CL016YE144I7G suits industrial motor control because its 56 hardware 18x18 multipliers deliver up to 1.3 GMACS DSP throughput for real-time FOCPWM computation, while 78 LVDS-capable user I/O pins handle encoder feedback, gate-driver signals, and current-sense ADCs. The industrial -40C to +100C I7G temperature grade plus 4 PLLs supporting precise PWM frequencies make it a strong fit for AC drives, BLDC servo controllers, and industrial pump or fan drives deployed on factory floors.
Recomendado
Video Surveillance and Image Processing
For video surveillance and image processing, the 10CL016YE144I7G provides 516 Kbits of M9K SRAM as line/frame buffers plus 56 hardware multipliers for Sobel, Gaussian, or motion-detection kernels. Its LVDS receivers support up to 875 Mbps, enabling direct interface to MIPI or LVDS image sensors without external deserializers, and the EQFP-144 package simplifies PCB layout for compact IP-camera or machine-vision boards.
Recomendado
Automotive Driver Assistance (Body/Infotainment)
The 10CL016YE144I7G's industrial I7G temperature range, AEC-Q100-friendly process, and 78 user I/O pins support automotive body electronics and infotainment domains such as instrument clusters, head-unit display controllers, and sensor fusion pre-processors. Its hardware multipliers accelerate driver-monitoring CNN pre-processing while DDR3/LPDDR2 controllers provide memory bandwidth for display frame buffers, and the EQFP-144 exposed pad simplifies thermal dissipation in sealed enclosures.
Recomendado
Portable Handheld Test Equipment
The Cyclone 10 LP family's low static and dynamic power makes the 10CL016YE144I7G attractive for battery-powered handheld test equipment such as protocol analyzers, oscilloscope front ends, or cable testers. The 15,408 logic elements host custom DSP filtering, the 56 multipliers accelerate FFT or correlation, and 20 global clocks permit multiple sample-rate domains, while the 78 user I/O pins drive LCDs, keypads, and probe interfaces in a compact handheld form factor.
Recomendado
Machine Vision Systems
For machine vision systems including pick-and-place inspection, AOI, and barcode sorting, the 10CL016YE144I7G delivers 1.3 GMACS DSP throughput to accelerate edge-detection, blob analysis, and pattern-matching algorithms in real time. The DDR3/LPDDR2 controller provides the bandwidth needed for full-HD frame buffers, the LVDS I/O interfaces directly to CMOS image sensors, and the industrial I7G rating tolerates factory-floor thermal conditions inside sealed camera housings.
Recomendado
IoT Edge Nodes
For IoT edge nodes aggregating multiple sensor streams, the 10CL016YE144I7G's 78 user I/O pins interface to UART, SPI, I2C, GPIO, and analog front ends without external bus expanders. The 56 18x18 multipliers accelerate on-device pre-processing of vibration, acoustic, or current signals, while low Cyclone 10 LP dynamic power lets the device run on PoE or solar/battery budgets typical of distributed edge gateways.
Recomendado
Medical Imaging Front End
Ultrasound and medical imaging front ends benefit from the 10CL016YE144I7G's 56 hardware multipliers for beamforming and envelope detection, combined with 516 Kbits of M9K SRAM for sample buffering. The LVDS I/O up to 875 Mbps captures high-speed ADC data directly, while the industrial I7G temperature range supports operating-room and clinical equipment reliability requirements.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para 10CL016YE144I7G — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | 10CL016ZE144I7G | 10CL016YE144C8G | 10CL025ZE144I8G |
|---|---|---|---|---|
| Brand | Intel (Altera) | Intel (Altera) | Intel (Altera) | Intel (Altera) |
| Package | EQFP-144 (20x20 mm) | EQFP-144 (same) | EQFP-144 (same) | EQFP-144 (same) |
| Logic Elements | 15,408 | 15,408 | 15,408 | 24,624 |
| Embedded Memory | 516 Kbits (56 M9K blocks) | 516 Kbits | 516 Kbits | 594 Kbits |
| 18x18 Multipliers | 56 | 56 | 56 | 66 |
| User I/O Pins | 78 | 78 | 78 | 78 |
| Temperature Grade | Industrial -40C to +100C (I7G) | Industrial -40C to +100C | Commercial 0C to +85C | Industrial -40C to +100C |
| Speed Grade | 7 (Y speed grade) | 7 (Z speed grade, slower) | 8 (C speed grade, faster) | 8 (I speed grade) |
Principais diferenciais
- Optimal price/performance balance in Cyclone 10 LP family (vs 10CL006YE144C6G)
- Industrial temperature grade for harsh-environment deployment (vs 10CL016YE144C8G)
- Faster speed grade than Z7 equivalent (vs 10CL016ZE144I7G)
Notas de projeto
Solder the EQFP-144 exposed pad to a PCB thermal land with at least 9 thermal vias to a continuous inner ground plane. For the I7G industrial grade (junction range -40C to +100C) the device dissipates modest static power (estimated under 1W typical at moderate toggle rates), but thermal relief remains mandatory to keep junction rise below 30C in sealed enclosures. Use the Intel Cyclone 10 LP PowerPlay Early Power Estimator before final layout.
Decouple VCCINT (1.2V) with 100nF X7R ceramics placed within 2mm of every VCCINT pin, plus one 10uF bulk cap per VCCINT bank. Each VCCIO bank should have its own 100nF + 4.7uF pair. Keep all configuration traces (TCK, TMS, TDI, TDO, nSTATUS, nCONFIG, DCLK, DATA0) short and route them away from switching I/O to avoid configuration failures during power-up.
Cyclone 10 LP devices have NO internal configuration flash - selecting the wrong serial configuration device (EPCS16/EPCS64 or compatible third-party flash like M25P16/M25P64) will cause configuration failure. Verify MSEL0/MSEL1/MSEL2 strapping matches the desired configuration mode (AS x1, AS x4, AP, FPP, JTAG) at every power-on, since a mismatch silently holds the FPGA in reset.
LVDS pairs must be routed as 100-ohm differential impedance with matched lengths within the datasheet tolerance. Place series 100-ohm termination close to the LVDS driver and keep LVDS traces away from noisy power rails. For DDR2/DDR3 interfaces, follow the Intel External Memory Interface (EMIF) pin-out and length-matching guidelines exactly or timing closure will fail.
Informações de conformidade
RoHS compliant and lead-free per Intel product page. I7G is industrial temperature grade, not AEC-Q100 - choose 10CL016YE144A7G for AEC-Q100 automotive qualification.
