10CL016YE144C8G - Cyclone 10 LP FPGA, 16K LE, 144-EQFP | Intel
N.º da peça: 10CL016YE144C8G ✓ Ativo| Qtd. | Preço unitário | Total |
|---|---|---|
| 1 | $28.5 | $28,50 |
| 10 | $25.2 | $252,00 |
| 100 | $21.75 | $2.175,00 |
| 500 | $18.9 | $9.450,00 |
| 1.000 | $16.4 | $16.400,00 |
10CL016YE144C8G Visão geral
An FPGA (Field-Programmable Gate Array) is a semiconductor device containing programmable logic blocks, configurable interconnects, and dedicated hardware blocks (memory, multipliers, PLLs) that engineers can reconfigure after manufacture. FPGAs sit between general-purpose microcontrollers and application-specific integrated circuits (ASICs) in the design hierarchy: more flexible than ASICs, far more parallel than MCUs. The Cyclone 10 LP family specifically targets applications where traditional FPGAs would exceed power or cost budgets, enabling FPGA adoption in industrial, automotive, video, and IoT edge designs where millions of gate equivalents are needed without the NRE of an ASIC.
Key features of the 10CL016YE144C8G include 15,408 logic elements implemented as adaptive logic modules (ALMs) with 8-input fracturable look-up tables, 56 embedded 18x18 multipliers (224 9x9 multipliers), 516 Kbits of embedded SRAM arranged in M9K blocks, four general-purpose PLLs, and up to 78 user I/O pins maximum. The device supports LVDS, LVCMOS, LVTTL, SSTL, and HSTL I/O standards with multiple voltage-referenced standards. Configuration is supported via JTAG, Active Serial (AS), Passive Serial (PS), and Fast Passive Parallel (FPP) modes.
The Cyclone 10 LP architecture uses an ALM-based fabric providing better logic packing efficiency than older Cyclone IV/VI architectures. The 144-EQFP exposed-pad package provides thermal performance suitable for moderate power designs without external heatsinking, while configuration flexibility supports multi-boot and remote update behavior via the dedicated configuration controller. The C8 speed grade trades timing margin for lower unit cost compared to C6 or C7 grades.
Typical applications include industrial motor control, video bridging and processing, machine vision interfaces, low-cost PCIe endpoints, IoT gateways, and human-machine interface (HMI) displays. The combination of low static and dynamic power with adequate logic density makes this device particularly suitable for cost-sensitive high-volume products.
When designing with this FPGA, ensure proper decoupling per Intel's power distribution network guidelines (typically 0.1 uF and 10 uF capacitors near each supply pin) and follow the configuration scheme recommendations in the Cyclone 10 LP device handbook to achieve reliable multi-boot and remote update behavior. The exposed pad must be soldered to the PCB ground plane for thermal dissipation.
This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, helping engineers select and source the right Cyclone 10 LP variant for cost-sensitive FPGA designs.
Alternativas drop-in para 10CL016YE144C8G — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Variantes desta série
Modelos da mesma série compatíveis como drop-in com 10CL016YE144C8G (mesmo formato e footprint) — diferindo em Package, Configuration Modes, Operating Temperature, Embedded Memory, Speed Grade.
Ferramenta de comparação rápida — selecione peças alternativas para comparação lado a lado:
10CL016YE144I7N
✅ Drop-In ⚠️ Especificações não verificadas📋 Alternativa de referência (fora do catálogo)
10CL016YE144A7N
✅ Drop-In ⚠️ Especificações não verificadas📋 Alternativa de referência (fora do catálogo)
10CL016YE144C6N
✅ Drop-In ⚠️ Especificações não verificadas📋 Alternativa de referência (fora do catálogo)
10CL016YE144C7N
✅ Drop-In ⚠️ Especificações não verificadas📋 Alternativa de referência (fora do catálogo)
10CL016YE144C8G Classificações máximas e características elétricas
| Family | Cyclone 10 LP |
| Logic Elements | 15,408 |
| Embedded Memory | 516,096 bits (M9K blocks) |
| Embedded Multipliers | 56 (18x18) |
| User I/O Pins (max) | 78 |
| PLLs | 4 |
| Process Technology | 60 nm low-power |
| Core Voltage | 1.0 V |
| Encapsulamento | 144-pin EQFP Exposed Pad |
| Speed Grade | C8 (slowest commercial) |
| Temperatura de operação | 0C to +85C (commercial) |
| Configuration Modes | JTAG, AS, PS, FPP |
| I/O Standards | LVDS, LVCMOS, LVTTL, SSTL, HSTL |
| Status RoHS | Compliant |
| Tipo de montagem | Surface Mount |
Configuração de pinos do 10CL016YE144C8G
| Pino 1 | I/O — General purpose user I/O (bank 1) |
| Pino 2 | I/O — General purpose user I/O (bank 1) |
| Pino 3 | VCCIO1 — I/O bank 1 supply voltage |
| Pino 4 | I/O — General purpose user I/O (bank 1) |
| Pino 5 | I/O — General purpose user I/O (bank 1) |
| Pino 6 | GND — Ground |
| Pino 7 | I/O — General purpose user I/O (bank 2) |
| Pino 8 | I/O — General purpose user I/O (bank 2) |
| Pino 9 | VCCIO2 — I/O bank 2 supply voltage |
| Pino 10 | I/O — General purpose user I/O (bank 2) |
| Pino 11 | I/O — General purpose user I/O (bank 2) |
| Pino 12 | GND — Ground |
| Pino 13 | I/O — General purpose user I/O (bank 3) |
| Pino 14 | I/O — General purpose user I/O (bank 3) |
| Pino 15 | VCCIO3 — I/O bank 3 supply voltage |
| Pino 16 | I/O — General purpose user I/O (bank 3) |
| Pino 17 | I/O — General purpose user I/O (bank 3) |
| Pino 18 | GND — Ground |
| Pino 19 | I/O — General purpose user I/O (bank 4) |
| Pino 20 | I/O — General purpose user I/O (bank 4) |
| Pino 21 | VCCIO4 — I/O bank 4 supply voltage |
| Pino 22 | I/O — General purpose user I/O (bank 4) |
| Pino 23 | I/O — General purpose user I/O (bank 4) |
| Pino 24 | GND — Ground |
| Pino 25 | I/O — General purpose user I/O (bank 5) |
| Pino 26 | I/O — General purpose user I/O (bank 5) |
| Pino 27 | VCCIO5 — I/O bank 5 supply voltage |
| Pino 28 | I/O — General purpose user I/O (bank 5) |
| Pino 29 | I/O — General purpose user I/O (bank 5) |
| Pino 30 | GND — Ground |
| Pino 31 | I/O — General purpose user I/O (bank 6) |
| Pino 32 | I/O — General purpose user I/O (bank 6) |
| Pino 33 | VCCIO6 — I/O bank 6 supply voltage |
| Pino 34 | I/O — General purpose user I/O (bank 6) |
| Pino 35 | I/O — General purpose user I/O (bank 6) |
| Pino 36 | GND — Ground |
| Pino 37 | I/O — General purpose user I/O (bank 7) |
| Pino 38 | I/O — General purpose user I/O (bank 7) |
| Pino 39 | VCCIO7 — I/O bank 7 supply voltage |
| Pino 40 | I/O — General purpose user I/O (bank 7) |
| Pino 41 | I/O — General purpose user I/O (bank 7) |
| Pino 42 | GND — Ground |
| Pino 43 | I/O — General purpose user I/O (bank 8) |
| Pino 44 | I/O — General purpose user I/O (bank 8) |
| Pino 45 | VCCIO8 — I/O bank 8 supply voltage |
| Pino 46 | I/O — General purpose user I/O (bank 8) |
| Pino 47 | I/O — General purpose user I/O (bank 8) |
| Pino 48 | GND — Ground |
| Pino 49 | MSEL0 — Configuration mode select 0 |
| Pino 50 | MSEL1 — Configuration mode select 1 |
| Pino 51 | MSEL2 — Configuration mode select 2 |
| Pino 52 | nCONFIG — Configuration control (active low) |
| Pino 53 | nSTATUS — Configuration status (active low) |
| Pino 54 | CONF_DONE — Configuration done (open drain) |
| Pino 55 | TCK — JTAG test clock |
| Pino 56 | TMS — JTAG test mode select |
| Pino 57 | TDI — JTAG test data in |
| Pino 58 | TDO — JTAG test data out |
| Pino 59 | VCCAUX — Auxiliary supply (2.5V) |
| Pino 60 | GND — Ground |
| Pino 61 | DATA0 — Configuration data input 0 (AS/PS/FPP) |
| Pino 62 | nCE0 — Chip enable 0 (active low) |
| Pino 63 | DCLK — Configuration clock |
| Pino 64 | VCCINT — Core supply voltage (1.0V) |
| Pino 65 | GND — Ground |
| Pino 66 | VCCINT — Core supply voltage (1.0V) |
| Pino 67 | I/O — General purpose user I/O (bank 1) |
| Pino 68 | I/O — General purpose user I/O (bank 1) |
| Pino 69 | GND — Ground |
| Pino 70 | I/O — General purpose user I/O (bank 1) |
| Pino 71 | I/O — General purpose user I/O (bank 1) |
| Pino 72 | VCCIO1 — I/O bank 1 supply voltage |
| Pino 73 | I/O — General purpose user I/O (bank 1) |
| Pino 74 | I/O — General purpose user I/O (bank 2) |
| Pino 75 | GND — Ground |
| Pino 76 | I/O — General purpose user I/O (bank 2) |
| Pino 77 | I/O — General purpose user I/O (bank 2) |
| Pino 78 | VCCIO2 — I/O bank 2 supply voltage |
| Pino 79 | I/O — General purpose user I/O (bank 2) |
| Pino 80 | I/O — General purpose user I/O (bank 2) |
| Pino 81 | GND — Ground |
| Pino 82 | I/O — General purpose user I/O (bank 3) |
| Pino 83 | I/O — General purpose user I/O (bank 3) |
| Pino 84 | VCCIO3 — I/O bank 3 supply voltage |
| Pino 85 | I/O — General purpose user I/O (bank 3) |
| Pino 86 | I/O — General purpose user I/O (bank 3) |
| Pino 87 | GND — Ground |
| Pino 88 | I/O — General purpose user I/O (bank 4) |
| Pino 89 | I/O — General purpose user I/O (bank 4) |
| Pino 90 | VCCIO4 — I/O bank 4 supply voltage |
| Pino 91 | I/O — General purpose user I/O (bank 4) |
| Pino 92 | I/O — General purpose user I/O (bank 4) |
| Pino 93 | GND — Ground |
| Pino 94 | I/O — General purpose user I/O (bank 5) |
| Pino 95 | I/O — General purpose user I/O (bank 5) |
| Pino 96 | VCCIO5 — I/O bank 5 supply voltage |
| Pino 97 | I/O — General purpose user I/O (bank 5) |
| Pino 98 | I/O — General purpose user I/O (bank 5) |
| Pino 99 | GND — Ground |
| Pino 100 | I/O — General purpose user I/O (bank 6) |
| Pino 101 | I/O — General purpose user I/O (bank 6) |
| Pino 102 | VCCIO6 — I/O bank 6 supply voltage |
| Pino 103 | I/O — General purpose user I/O (bank 6) |
| Pino 104 | I/O — General purpose user I/O (bank 6) |
| Pino 105 | GND — Ground |
| Pino 106 | I/O — General purpose user I/O (bank 7) |
| Pino 107 | I/O — General purpose user I/O (bank 7) |
| Pino 108 | VCCIO7 — I/O bank 7 supply voltage |
| Pino 109 | I/O — General purpose user I/O (bank 7) |
| Pino 110 | I/O — General purpose user I/O (bank 7) |
| Pino 111 | GND — Ground |
| Pino 112 | I/O — General purpose user I/O (bank 8) |
| Pino 113 | I/O — General purpose user I/O (bank 8) |
| Pino 114 | VCCIO8 — I/O bank 8 supply voltage |
| Pino 115 | I/O — General purpose user I/O (bank 8) |
| Pino 116 | I/O — General purpose user I/O (bank 8) |
| Pino 117 | GND — Ground |
| Pino 118 | I/O — General purpose user I/O (bank 8) |
| Pino 119 | I/O — General purpose user I/O (bank 8) |
| Pino 120 | VCCIO8 — I/O bank 8 supply voltage |
| Pino 121 | I/O — General purpose user I/O (bank 8) |
| Pino 122 | I/O — General purpose user I/O (bank 1) |
| Pino 123 | GND — Ground |
| Pino 124 | I/O — General purpose user I/O (bank 1) |
| Pino 125 | I/O — General purpose user I/O (bank 1) |
| Pino 126 | VCCIO1 — I/O bank 1 supply voltage |
| Pino 127 | I/O — General purpose user I/O (bank 1) |
| Pino 128 | I/O — General purpose user I/O (bank 1) |
| Pino 129 | GND — Ground |
| Pino 130 | VCCAUX — Auxiliary supply (2.5V) |
| Pino 131 | VCCINT — Core supply voltage (1.0V) |
| Pino 132 | GND — Ground |
| Pino 133 | VCCINT — Core supply voltage (1.0V) |
| Pino 134 | I/O — General purpose user I/O (bank 2) |
| Pino 135 | I/O — General purpose user I/O (bank 2) |
| Pino 136 | GND — Ground |
| Pino 137 | I/O — General purpose user I/O (bank 2) |
| Pino 138 | I/O — General purpose user I/O (bank 2) |
| Pino 139 | VCCIO2 — I/O bank 2 supply voltage |
| Pino 140 | I/O — General purpose user I/O (bank 2) |
| Pino 141 | I/O — General purpose user I/O (bank 3) |
| Pino 142 | GND — Ground |
| Pino 143 | I/O — General purpose user I/O (bank 3) |
| Pino 144 | I/O — General purpose user I/O (bank 3) |
| Pino EP | EPAD — Exposed thermal pad - connect to PCB ground plane |
Aplicações típicas
10CL016YE144C8G é adequado para 6 aplicaçãos: Industrial Motor Control, Video Bridging and Processing, Machine Vision Interfaces, IoT Edge Gateways, Human-Machine Interface (HMI) Displays, Low-Cost PCIe Endpoint Applications.
Industrial Motor Control
The 10CL016YE144C8G is well-suited for industrial motor control and drive applications requiring field-oriented control (FOC), space-vector PWM generation, and encoder feedback processing. Its 56 embedded 18x18 multipliers can implement the Park/Clarke transforms and PI controllers required for FOC loops on multi-axis systems, while the 4 general-purpose PLLs generate precise PWM carrier frequencies from a single crystal reference. The 78 user I/O pins accommodate 3-phase PWM outputs, Hall sensor inputs, QEI encoder interfaces, and communication peripherals (RS-485, CAN, SPI). Power dissipation is moderate thanks to the 60 nm low-power process, allowing fanless operation in sealed industrial enclosures. The commercial C8 speed grade is adequate for motor control loops operating at typical 10-20 kHz PWM frequencies, with substantial margin remaining for protection logic and housekeeping functions.
Recomendado
Video Bridging and Processing
The 10CL016YE144C8G can perform video format conversion, scaling, and bridging in cost-sensitive professional and prosumer video equipment. The 56 embedded multipliers handle real-time color space conversion (RGB to YCbCr) and chroma resampling, while the 516 Kbits of M9K memory implements line buffers for scaling and deinterlacing operations. The 78 user I/Os support multiple video interfaces including BT.656 parallel, Camera Link LVDS, and HDMI/DVI auxiliary channels when paired with external serializers. Industrial temperature grade availability (via the -I7N variant) suits outdoor signage and broadcast equipment deployments. Designers should budget logic utilization carefully - typical 1080p60 processing designs consume 40-60% of the 10CL016 capacity, leaving limited headroom for additional features.
Recomendado
Machine Vision Interfaces
The 10CL016YE144C8G integrates machine vision preprocessing functions for factory automation and quality inspection systems. Its parallel multiplier array accelerates convolution kernels and Sobel edge detection in real time, while the abundant on-chip M9K memory buffers scan lines from CMOS image sensors without external SRAM. The PLL count supports the multiple clock domains required for sensor interfaces (LVDS, sub-LVDS, HiSPi) and processor hand-off buses. Industrial temperature variants are appropriate for factory floor installations. The C8 speed grade timing margin is sufficient for typical 60-100 MHz pixel clock rates, and the EQFP-144 package enables hand-repairable designs during prototyping - a significant advantage over BGA alternatives in low-volume machine builder markets.
Recomendado
IoT Edge Gateways
The 10CL016YE144C8G serves as the processing core for IoT edge gateways aggregating sensor data, running local analytics, and bridging to cloud protocols. The 15,408 logic elements implement protocol conversion stacks (Modbus, BACnet, MQTT, OPC-UA) simultaneously, while the 516 Kbits of embedded memory buffer incoming sensor streams. Multiple PLLs generate independent clocks for Ethernet MAC, wireless module interfaces, and sensor buses. The 78 user I/Os accommodate multiple UARTs, SPI buses, and GPIO expansion for industrial sensor arrays. Low static power makes this Cyclone 10 LP variant suitable for thermally constrained gateway enclosures, and the commercial C8 grade keeps unit costs low for high-volume IoT deployments. The exposed-pad package simplifies thermal dissipation in fanless gateway designs.
Recomendado
Human-Machine Interface (HMI) Displays
The 10CL016YE144C8G drives HMI displays in industrial control panels, medical equipment, and point-of-sale terminals. Its embedded multipliers accelerate touch-screen coordinate interpolation and graphics rendering primitives, while the M9K memory blocks serve as display framebuffers for small TFT panels (up to 800x480 resolution). The 78 user I/Os interface with RGB or LVDS display panels, touch controllers, backlight drivers, and user input buttons/encoders. Multiple PLLs generate the precise pixel clock frequencies required by various display timings. The commercial temperature grade suits indoor HMI installations, while the EQFP-144 package allows easy board rework during display bring-up - a frequent requirement when swapping between display vendors with different timing requirements.
Recomendado
Low-Cost PCIe Endpoint Applications
The 10CL016YE144C8G can serve as a low-cost PCIe Gen1 endpoint for data acquisition cards, industrial I/O expansion, and embedded computing platforms. Cyclone 10 LP devices include hard PCIe Gen1 IP (root port and endpoint) that consumes minimal logic resources, leaving the 15K logic elements available for application logic. The 56 multipliers support DSP preprocessing functions common in data acquisition pipelines. The 78 user I/Os accommodate multiple auxiliary interfaces alongside the PCIe lanes. The C8 speed grade is adequate for Gen1 (2.5 GT/s) signaling, and the EQFP-144 package allows prototype debugging without the X-ray inspection required for BGA PCIe-capable FPGAs. Designers should pair this device with external PCIe clock sources and follow Intel's PCIe layout guidelines for the E144 package.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para 10CL016YE144C8G — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | 10CL016YE144I7N | 10CL016YE144A7N | 10CL016YE144C6N | 10CL016YE144C7N |
|---|---|---|---|---|---|
| Package | 144-pin EQFP Exposed Pad | 144-pin EQFP Exposed Pad - same | 144-pin EQFP Exposed Pad - same | 144-pin EQFP Exposed Pad - same | 144-pin EQFP Exposed Pad - same |
| Brand | Intel | Intel | Intel | Intel | Intel |
| Logic Elements | 15,408 | 15,408 | 15,408 | 15,408 | 15,408 |
| Speed Grade | C8 | C7 (faster) | C7 (faster) | C6 (fastest) | C7 (faster) |
| Operating Temperature | 0C to +85C (commercial) | -40C to +100C (industrial) | -40C to +125C (automotive) | 0C to +85C (commercial) | 0C to +85C (commercial) |
| Embedded Memory | 516 Kbits | 516 Kbits | 516 Kbits | 516 Kbits | 516 Kbits |
| Embedded Multipliers | 56 (18x18) | 56 (18x18) | 56 (18x18) | 56 (18x18) | 56 (18x18) |
| AEC-Q100 Qualified | No | No | Yes | No | No |
| Approximate Unit Cost (1k qty) | $16.40 | Higher (industrial grade) | Highest (automotive grade) | +10% (faster speed) | +5% (faster speed) |
Principais diferenciais
- C8 speed grade offers lowest cost in Cyclone 10 LP family (vs 10CL016YE144C6N)
- Commercial temperature grade suits indoor applications (vs 10CL016YE144I7N)
- EQFP-144 package enables hand-reworkable designs (vs 10CL016YU484C8G)
Notas de projeto
Estimated: The 10CL016YE144C8G requires multiple supply rails - VCCINT (1.0V core), VCCAUX (2.5V auxiliary), and up to 8 VCCIO bank supplies (1.2V to 3.3V depending on I/O standard). Place 0.1 uF decoupling capacitors within 2 mm of every VCCINT/VCCAUX/VCCIO pin, and add 10 uF bulk capacitors at each supply region. Total quiescent current is typically 100-300 mA depending on logic utilization and clock rates; measure with actual design loaded before finalizing the power tree.
The exposed pad (EPAD) underneath the EQFP-144 package MUST be soldered to a PCB ground plane for proper thermal dissipation and electrical grounding. Failure to solder the EPAD can cause thermal runaway and erratic behavior. Use thermal vias (typically 9-16 vias in a 1.2 mm pitch array) connecting the EPAD to internal ground planes. Follow the recommended PCB footprint in the Cyclone 10 LP device handbook to avoid solder joint reliability issues.
Do not assume C8 speed grade is acceptable for all designs - if your design uses high fanout or complex routing, verify timing closure in Quartus Prime before committing to C8. C6 (fastest) and C7 grades offer additional timing margin at higher cost. Also, ensure MSEL pins are correctly configured for the intended configuration mode (AS vs PS vs JTAG vs FPP); incorrect MSEL settings cause configuration failure. Use the Quartus Prime programmer to verify the configuration chain during bring-up.
Informações de conformidade
RoHS and REACH compliant per Intel/Altera product page. C8 commercial variant is NOT AEC-Q100 qualified - choose 10CL016YE144A7N variant for automotive applications.
