5M160ZE64I5N - 160 Logic Element MAX V CPLD | Intel | 64-EQFP
N.º da peça: 5M160ZE64I5N ✓ Ativo| Qtd. | Preço unitário | Total |
|---|---|---|
| 1 | $6.36 | $6,36 |
| 10 | $5.73 | $57,30 |
| 100 | $5.16 | $516,00 |
| 500 | $4.65 | $2.325,00 |
| 1.000 | $4.13 | $4.130,00 |
5M160ZE64I5N Visão geral
A CPLD (Complex Programmable Logic Device) is a non-volatile digital IC that contains multiple logic array blocks (LABs) interconnected by a programmable switch matrix. In the broader taxonomy, CPLDs sit below FPGAs in logic density but above discrete 74-series glue logic, providing instant-on configuration from on-chip flash, deterministic timing, and dozens to hundreds of I/O pins in a single chip - ideal for I/O expansion, bus bridging, power sequencing, and control logic in cost-sensitive embedded designs.
Key features include 128 macrocells distributed across 4 logic array blocks, 4.0 Kbits of user flash memory for in-system custom configuration, 3.3 V or 2.5 V core operation with multi-voltage I/O banks (1.5 V / 1.8 V / 2.5 V / 3.3 V LVCMOS/LVTTL), and IEEE 1149.1 JTAG support via the TMS, TDI, TDO, and TCK pins. The device supports LVDS, RSDS, mini-LVDS, and LVPECL differential I/O via emulated pairs, and the MultiVolt core allows flexible interface to 1.5 V, 1.8 V, 3.3 V, and 5 V systems.
Architecturally, the 5M160ZE64I5N uses a CMOS SRAM-based LUT fabric backed by non-volatile flash, giving instant-on behavior with no external configuration PROM. Each macrocell contains a programmable register that can be configured as D, T, JK, or SR flip-flop, with the logic array block switch matrix providing fast, deterministic signal propagation. This combination delivers the predictability engineers expect from a CPLD while keeping quiescent current around 25 microamps in standby.
Typical applications include I/O expansion and level translation in industrial control boards, glue logic for microprocessors and DSPs, power-up sequencing for multi-rail systems, JTAG chain management, LED display driving, and general-purpose state-machine replacement. The wide I/O bank voltage support makes it especially useful as a bridge between legacy 5 V peripherals and modern 1.8 V / 3.3 V processors.
When designing with this device, confirm that your Quartus II / Quartus Prime toolchain supports the MAX V device family (free Web Edition or licensed Subscription Edition). Pin assignment can be performed with the Pin Planner tool, and JTAG programming uses a USB-Blaster, ByteBlaster, or compatible cable. The exposed thermal pad on the EQFP package must be soldered to the PCB ground plane for proper thermal and electrical performance.
This page synthesizes distributor pricing, drop-in alternatives within the MAX V family, and practical design notes not found in the manufacturer datasheet alone, giving engineers a single reference for sourcing, replacement, and application.
Alternativas drop-in para 5M160ZE64I5N — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Variantes desta série
Modelos da mesma série compatíveis como drop-in com 5M160ZE64I5N (mesmo formato e footprint) — diferindo em Package, Operating Temperature, Programming Interface, Configuration Memory, User Flash Memory.
Ferramenta de comparação rápida — selecione peças alternativas para comparação lado a lado:
5M160ZE64C5N
✅ Drop-In✓ Em estoque
$4.95 / unidade
Ver ficha técnica →5M160ZE64I4N
✅ Drop-In✓ Em estoque
Consulte o preço
Ver ficha técnica →5M160ZE64A5N
✅ Drop-In✓ Em estoque
$6.2 / unidade
Ver ficha técnica →5M160ZE64I5
✅ Drop-In✓ Em estoque
$4.1 / unidade
Ver ficha técnica →5M240ZT100I5N
✅ Drop-In ⚠️ Especificações não verificadas✓ Em estoque
$4.81 / unidade
Ver ficha técnica →5M160ZE64I5N Classificações máximas e características elétricas
| Device Family | MAX V |
| Logic Elements (LEs) | 160 |
| Macrocells | 128 |
| Maximum User I/O Pins | 79 |
| Pin-to-Pin Logic Delay (tPD) | 7.5 ns |
| User Flash Memory | 4.0 Kbits |
| Logic Array Blocks (LABs) | 4 |
| Supply Voltage - Core | 3.3 V or 2.5 V |
| I/O Bank Voltages | 1.5 V / 1.8 V / 2.5 V / 3.3 V |
| Temperatura de operação | -40C to +100C (Industrial) |
| Encapsulamento | 64-pin EQFP (Exposed Pad) |
| Tipo de montagem | Surface Mount |
| JTAG Support | Yes (IEEE 1149.1, TMS/TDI/TDO/TCK) |
| Differential I/O | LVDS, RSDS, mini-LVDS, LVPECL (emulated) |
| Configuration | Non-volatile on-chip flash, instant-on |
| Status RoHS | Compliant |
Configuração de pinos do 5M160ZE64I5N
| Pino 1 | I/O — General-purpose user I/O (Bank 1) |
| Pino 2 | I/O — General-purpose user I/O (Bank 1) |
| Pino 3 | I/O — General-purpose user I/O (Bank 1) |
| Pino 4 | I/O — General-purpose user I/O (Bank 1) |
| Pino 5 | I/O — General-purpose user I/O (Bank 1) |
| Pino 6 | I/O — General-purpose user I/O (Bank 1) |
| Pino 7 | I/O — General-purpose user I/O (Bank 1) |
| Pino 8 | I/O — General-purpose user I/O (Bank 1) |
| Pino 9 | GND — Ground |
| Pino 10 | I/O — General-purpose user I/O (Bank 1) |
| Pino 11 | I/O — General-purpose user I/O (Bank 1) |
| Pino 12 | I/O — General-purpose user I/O (Bank 1) |
| Pino 13 | I/O — General-purpose user I/O (Bank 1) |
| Pino 14 | I/O — General-purpose user I/O (Bank 1) |
| Pino 15 | TDI — JTAG Test Data In (Bank 1) |
| Pino 16 | TMS — JTAG Test Mode Select (Bank 1) |
| Pino 17 | TCK — JTAG Test Clock (Bank 1) |
| Pino 18 | I/O — General-purpose user I/O (Bank 1) |
| Pino 19 | I/O — General-purpose user I/O (Bank 1) |
| Pino 20 | I/O — General-purpose user I/O (Bank 1) |
| Pino 21 | I/O — General-purpose user I/O (Bank 1) |
| Pino 22 | I/O — General-purpose user I/O (Bank 1) |
| Pino 23 | VCCIO1 — I/O Bank 1 supply voltage |
| Pino 24 | I/O — General-purpose user I/O (Bank 1) |
| Pino 25 | I/O — General-purpose user I/O (Bank 1) |
| Pino 26 | I/O — General-purpose user I/O (Bank 1) |
| Pino 27 | I/O — General-purpose user I/O (Bank 2) |
| Pino 28 | I/O — General-purpose user I/O (Bank 2) |
| Pino 29 | I/O — General-purpose user I/O (Bank 2) |
| Pino 30 | I/O — General-purpose user I/O (Bank 2) |
| Pino 31 | I/O — General-purpose user I/O (Bank 2) |
| Pino 32 | GND — Ground |
| Pino 33 | I/O — General-purpose user I/O (Bank 2) |
| Pino 34 | I/O — General-purpose user I/O (Bank 2) |
| Pino 35 | I/O — General-purpose user I/O (Bank 2) |
| Pino 36 | I/O — General-purpose user I/O (Bank 2) |
| Pino 37 | I/O — General-purpose user I/O (Bank 2) |
| Pino 38 | I/O — General-purpose user I/O (Bank 2) |
| Pino 39 | I/O — General-purpose user I/O (Bank 2) |
| Pino 40 | I/O — General-purpose user I/O (Bank 2) |
| Pino 41 | I/O — General-purpose user I/O (Bank 2) |
| Pino 42 | VCCIO2 — I/O Bank 2 supply voltage |
| Pino 43 | I/O — General-purpose user I/O (Bank 2) |
| Pino 44 | I/O — General-purpose user I/O (Bank 2) |
| Pino 45 | I/O — General-purpose user I/O (Bank 2) |
| Pino 46 | I/O — General-purpose user I/O (Bank 2) |
| Pino 47 | I/O — General-purpose user I/O (Bank 2) |
| Pino 48 | I/O — General-purpose user I/O (Bank 2) |
| Pino 49 | GND — Ground |
| Pino 50 | TDO — JTAG Test Data Out (Bank 1) |
| Pino 51 | I/O — General-purpose user I/O (Bank 2) |
| Pino 52 | I/O — General-purpose user I/O (Bank 2) |
| Pino 53 | I/O — General-purpose user I/O (Bank 2) |
| Pino 54 | I/O — General-purpose user I/O (Bank 2) |
| Pino 55 | I/O — General-purpose user I/O (Bank 2) |
| Pino 56 | VCCINT — Core supply voltage (3.3 V or 2.5 V) |
| Pino 57 | I/O — General-purpose user I/O (Bank 2) |
| Pino 58 | I/O — General-purpose user I/O (Bank 2) |
| Pino 59 | I/O — General-purpose user I/O (Bank 2) |
| Pino 60 | I/O — General-purpose user I/O (Bank 2) |
| Pino 61 | I/O — General-purpose user I/O (Bank 2) |
| Pino 62 | I/O — General-purpose user I/O (Bank 2) |
| Pino 63 | I/O — General-purpose user I/O (Bank 2) |
| Pino 64 | I/O — General-purpose user I/O (Bank 2) |
Aplicações típicas
5M160ZE64I5N é adequado para 6 aplicaçãos: Industrial I/O Expansion and Level Translation, Glue Logic for Microprocessors and DSPs, Power-Up Sequencing for Multi-Rail Systems, JTAG Chain Management and Boundary Scan, LED Display and Signage Driving, State Machine Replacement in Embedded Controls.
Industrial I/O Expansion and Level Translation
The 5M160ZE64I5N is widely used to expand I/O count and bridge voltage domains on industrial control boards where the host processor lacks enough GPIOs or operates at a different logic level than the peripherals. Its 79 maximum user I/O pins and MultiVolt I/O banks (1.5 V to 3.3 V per bank) let a single device translate between a 1.8 V SoC and 3.3 V or 5 V-tolerant peripherals in one chip. Compared with discrete 74-series translators, the CPLD approach is one IC instead of ten, saving PCB area and BOM cost while remaining instantly reconfigurable for late design changes.
Recomendado
Glue Logic for Microprocessors and DSPs
Designers use the 5M160ZE64I5N as modern 'glue logic' to combine address decoding, chip-select generation, wait-state insertion, and interrupt steering between a microprocessor and its memory/peripheral bus. With a 7.5 ns pin-to-pin delay, the device comfortably meets the timing budgets of 50 MHz to 70 MHz external memory buses, replacing dozens of 74HC/74F-series gates in a single non-volatile package. Industrial temperature qualification and instant-on from on-chip flash make it a robust choice for embedded compute platforms that must boot deterministically in the field.
Recomendado
Power-Up Sequencing for Multi-Rail Systems
The 5M160ZE64I5N excels at sequencing complex multi-rail power systems in networking, telecom, and server boards where rails must come up in a defined order to prevent latch-up or in-rush damage. Its 128 macrocells are more than enough to implement a 6 to 10-rail sequencer with adjustable delays, fault detection, and PG (power-good) handshaking. Non-volatile flash means the sequencing program is available the moment VCC is valid, before any processor on the board has booted - critical for ASICs and FPGAs that need controlled voltage ramps.
Recomendado
JTAG Chain Management and Boundary Scan
The 5M160ZE64I5N is frequently placed in JTAG scan chains to bridge or extend IEEE 1149.1 boundary-scan access to downstream devices on densely populated boards. With its own JTAG TAP, the CPLD can multiplex between a board-level test access port and in-system programming of other devices, or chain multiple JTAG devices into a single daisy chain with correct TDO-to-TDI routing. This simplifies factory test fixtures and field firmware updates by centralizing all JTAG traffic through one well-characterized component.
Recomendado
LED Display and Signage Driving
Commercial LED displays, traffic signs, and large-format signage boards use the 5M160ZE64I5N to multiplex rows and columns of LEDs, generate PWM dimming, and scan keypads in parallel. The device's 79 user I/O pins drive up to 64 multiplexed LEDs directly with no additional drivers for small signs, while its 7.5 ns tPD supports the sub-microsecond row scanning required for flicker-free PWM dimming at 1 kHz refresh rates. Industrial temperature rating makes it suitable for outdoor enclosures subject to summer heat and winter cold.
Recomendado
State Machine Replacement in Embedded Controls
Engineers replace complex discrete state-machine implementations - especially in motor control, valve sequencing, and instrument front panels - with the 5M160ZE64I5N to consolidate 20 to 30 MSI logic chips into one programmable device. The MAX V's deterministic 7.5 ns timing guarantees worst-case state transitions, which is essential in safety-related controls where asynchronous glitches cannot be tolerated. Once a design is stable, the JTAG-programmed flash configuration becomes a locked BOM item with no firmware-update burden on the host MCU.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para 5M160ZE64I5N — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | 5M160ZE64C5N | 5M160ZE64I4N | 5M160ZE64A5N | 5M160ZE64I5 |
|---|---|---|---|---|---|
| Brand | Intel (formerly Altera) | Intel | Intel | Intel | Intel |
| Package | 64-pin EQFP | 64-pin EQFP | 64-pin EQFP | 64-pin EQFP | 64-pin EQFP |
| Logic Elements | 160 | 160 | 160 | 160 | 160 |
| Macrocells | 128 | 128 | 128 | 128 | 128 |
| tPD (Pin-to-Pin Delay) | 7.5 ns | 7.5 ns | 9.0 ns | 7.5 ns | 7.5 ns |
| Temperature Grade | Industrial -40C to +100C | Commercial 0C to +85C | Industrial -40C to +100C | Automotive AEC-Q100 | Industrial -40C to +100C |
| Pb-Free (N suffix) | Yes (N) | Yes (N) | Yes (N) | Yes (N) | No (Pb-containing) |
| Quartus Toolchain Support | Yes (MAX V device family) | Yes | Yes | Yes | Yes |
Principais diferenciais
- Industrial temperature grade vs commercial-only drop-ins (vs 5M160ZE64C5N)
- Faster speed grade vs I4 variant (vs 5M160ZE64I4N)
- Lower-cost vs automotive AEC-Q100 grade (vs 5M160ZE64A5N)
Notas de projeto
The 5M160ZE64I5N core operates from VCCINT at either 3.3 V or 2.5 V, while VCCIO pins power each I/O bank independently at 1.5 V, 1.8 V, 2.5 V, or 3.3 V. Decouple every VCC pin with a 0.1 microfarad X7R ceramic capacitor placed within 3 mm of the pin, and add a 10 microfarad bulk tantalum or ceramic capacitor at each supply rail entry point. The exposed thermal pad on the EQFP package must be soldered to a continuous ground plane with at least nine thermal vias to a copper area of 1 square inch or larger for proper thermal relief.
Route the JTAG signals TMS, TDI, TDO, and TCK as a 4-wire daisy chain with TCK and TMS treated as clock-like signals - keep them short, length-matched within 25 mm, and series-terminated with 33 ohm resistors at the driver end when the chain exceeds 100 mm. Place 10 kohm pull-up resistors on TCK, TMS, TDI, and a pull-down on TDO to keep the JTAG state machine in a benign known state during board power-up, before the CPLD is configured.
Estimated: The exposed thermal pad (EP) on the EQFP-64 package is not optional. Skipping its solder connection can raise junction temperature by 15C to 25C under typical switching loads and cause intermittent logic errors at high ambient. A common mistake is also treating Bank 1 and Bank 2 as identical in JTAG mode - JTAG pins TMS, TDI, TDO, and TCK always reside in Bank 1, so VCCIO1 must remain powered whenever JTAG is in use, even if the user I/O banks are shut down for power savings.
Informações de conformidade
RoHS and REACH compliance per Intel/Altera product page; Pb-free confirmed by 'N' suffix. For AEC-Q100 automotive qualification, choose the 5M160ZE64A5N variant. Halogen-free status not explicitly stated in the Verified Web Data.
