AD7623ASTZRL - 16-Bit 1.33 MSPS PulSAR ADC | Analog Devices
N.º da peça: AD7623ASTZRL ✓ Ativo| Qtd. | Preço unitário | Total |
|---|---|---|
| 1 | $28.5 | $28,50 |
| 10 | $25.78 | $257,80 |
| 100 | $23.12 | $2.312,00 |
| 500 | $20.85 | $10.425,00 |
| 1.000 | $18.9 | $18.900,00 |
AD7623ASTZRL Visão geral
A SAR ADC is a type of analog-to-digital converter that uses a charge redistribution capacitive DAC combined with a comparator and successive-approximation logic to digitize an analog input in N clock cycles, where N equals the converter's resolution. SAR ADCs sit in the broader taxonomy of data converters (ADC -> Nyquist-rate ADC -> SAR ADC -> mixed-signal IC). Unlike delta-sigma ADCs, SAR converters offer single-shot latency, deterministic throughput, and no pipeline delay, which makes them ideal for multiplexing multi-channel systems and control loops where latency must be predictable.
Key performance highlights include 1.33 MSPS throughput, 16-bit resolution with no missing codes, an excellent linearity profile, and a wide common-mode input range supported by the fully differential architecture. The AD8021 op amp is recommended by Analog Devices as the input driver because it settles cleanly at 16-bit levels at high gain. Combined with the 2.048 V internal reference, the AD7623 offers a high-accuracy single-supply solution for industrial instrumentation, medical imaging front-ends, and spectrum analysis systems.
Typical applications include industrial process control and data acquisition, medical imaging (CT, ultrasound, MRI front-ends), spectrum analysis and vibration analysis, multi-channel multiplexed data acquisition systems, and precision instrumentation where deterministic latency matters.
When designing with the AD7623, pay close attention to the input driver selection - the op amp must settle at 16-bit resolution (0.0015%) within the ADC acquisition time, not just at 0.1% or 0.01% which is more commonly published. Use a low-inductance ground plane and decouple the 2.5 V supply close to the pins. The LQFP-48 package has a typical θJA around 50 C/W; thermal rise is modest given the low supply current.
This page synthesizes distributor pricing, drop-in alternatives within the PulSAR family, and design notes drawn from the Analog Devices AD7623 datasheet - content not consolidated on any single distributor page.
Alternativas drop-in para AD7623ASTZRL — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Variantes desta série
Modelos da mesma série compatíveis como drop-in com AD7623ASTZRL (mesmo formato e footprint) — diferindo em Architecture, Input Type, Package, Operating Temperature Range, Resolution.
Ferramenta de comparação rápida — selecione peças alternativas para comparação lado a lado:
AD7623ACPZRL
✅ Drop-In✓ Em estoque
$20.8 / unidade
Ver ficha técnica →AD7623ASTZ
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
AD7622BSTZ
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
AD7623ASTZRL Classificações máximas e características elétricas
| Resolução | 16 bit |
| Sample Rate | 1.33 MSPS |
| Architecture | SAR (charge redistribution) |
| Tensão de alimentação | 2.5 V (single) |
| Internal Reference | 2.048 V (typical ±7 ppm/°C drift) |
| Input Type | Fully differential analog input |
| Digital Interface | Parallel / Serial |
| Missing Codes | No missing codes at 16-bit level |
| Encapsulamento | 48-pin LQFP (LFQFP) |
| Tipo de montagem | Surface Mount |
| Faixa de temperatura de operação | -40 °C to +85 °C (industrial) |
| Terminal Form | GULL WING |
| Package Code | LFQFP |
| Package Shape | SQUARE |
| Number of Terminals | 48 |
| Temperature Grade | INDUSTRIAL |
| Status RoHS | Compliant |
Configuração de pinos do AD7623ASTZRL
| Pino 1 | DVDD — Digital supply voltage (2.5 V) |
| Pino 2 | DGND — Digital ground |
| Pino 3 | OBD — Out-of-Bound detection output |
| Pino 4 | CS — Chip Select input |
| Pino 5 | RD — Read input (parallel mode) |
| Pino 6 | WR — Write / Start conversion input |
| Pino 7 | BUSY — Busy output (high during conversion) |
| Pino 8 | D15 — Parallel data output bit 15 (MSB) |
| Pino 9 | D14 — Parallel data output bit 14 |
| Pino 10 | D13 — Parallel data output bit 13 |
| Pino 11 | D12 — Parallel data output bit 12 |
| Pino 12 | D11 — Parallel data output bit 11 |
| Pino 13 | D10 — Parallel data output bit 10 |
| Pino 14 | D9 — Parallel data output bit 9 |
| Pino 15 | D8 — Parallel data output bit 8 |
| Pino 16 | DGND — Digital ground |
| Pino 17 | D7 — Parallel data output bit 7 |
| Pino 18 | D6 — Parallel data output bit 6 |
| Pino 19 | D5 — Parallel data output bit 5 |
| Pino 20 | D4 — Parallel data output bit 4 |
| Pino 21 | D3 — Parallel data output bit 3 |
| Pino 22 | D2 — Parallel data output bit 2 |
| Pino 23 | D1 — Parallel data output bit 1 |
| Pino 24 | D0 — Parallel data output bit 0 (LSB) |
| Pino 25 | SDOUT — Serial data output (serial mode) |
| Pino 26 | SCLK — Serial clock (serial mode) |
| Pino 27 | SER/PAR — Interface mode select |
| Pino 28 | RESET — Reset input |
| Pino 29 | PD — Power-down input |
| Pino 30 | REF — Reference decoupling / external reference input |
| Pino 31 | REFSENSE — Reference sense / select |
| Pino 32 | REFGND — Reference ground |
| Pino 33 | AVDD — Analog supply (2.5 V) |
| Pino 34 | AGND — Analog ground |
| Pino 35 | IN+ — Differential analog input positive |
| Pino 36 | IN- — Differential analog input negative |
| Pino 37 | AGND — Analog ground |
| Pino 38 | AVDD — Analog supply (2.5 V) |
| Pino 39 | CAPB — Reference buffer bypass capacitor |
| Pino 40 | CAPA — Reference buffer bypass capacitor |
| Pino 41 | REFOUT — Internal 2.048 V reference output |
| Pino 42 | REFGND — Reference ground |
| Pino 43 | DGND — Digital ground |
| Pino 44 | DVDD — Digital supply (2.5 V) |
| Pino 45 | NC — Not connected |
| Pino 46 | NC — Not connected |
| Pino 47 | NC — Not connected |
| Pino 48 | NC — Not connected |
Aplicações típicas
AD7623ASTZRL é adequado para 6 aplicaçãos: Industrial Data Acquisition, Medical Imaging Front-End, Spectrum and Vibration Analysis, Precision Instrumentation, Multiplexed Multi-Channel Systems, Automatic Test Equipment (ATE).
Industrial Data Acquisition
The AD7623ASTZRL's 1.33 MSPS throughput and 16-bit no-missing-code resolution make it a strong fit for multi-channel industrial data acquisition systems sampling sensor bridges, RTDs, and strain gauges. Its SAR architecture provides deterministic latency per channel so muxed channels report in a known time, simplifying host timing. The single 2.5 V supply and internal 2.048 V reference shrink the analog front-end, while the 48-LQFP footprint leaves room for aggressive PCB routing on dense 4- or 8-channel boards.
Recomendado
Medical Imaging Front-End
In medical imaging front-ends (CT, MRI receiver, ultrasound beamformer pre-DSP), the AD7623ASTZRL delivers the dynamic range and channel-to-channel synchronization demanded by high-resolution reconstruction. The 16-bit SAR core offers single-shot latency so beamformed samples align deterministically; the fully differential input rejects common-mode noise from long sensor cables. Using the AD8021 driver preserves 16-bit linearity at the front-end and avoids dynamic-range loss that would otherwise lower image contrast.
Recomendado
Spectrum and Vibration Analysis
FFT-based spectrum and vibration analyzers depend on high dynamic range and clean spurious performance; the AD7623ASTZRL's 16-bit no-missing-code linearity keeps SFDR and SNR within usable bounds for vibration analysis on motors, bearings, and structural-health sensors. The 1.33 MSPS sample rate supports analysis up to ~600 kHz of input bandwidth under Nyquist. Pairing with an external anti-alias filter and the AD8021 driver creates a precision front-end with deterministic timing for synchronous sampling across multiple accelerometers.
Recomendado
Precision Instrumentation
Bench-top precision instruments - DMMs, source-measure units, calibration equipment - benefit from the AD7623ASTZRL's 16-bit SAR performance and single 2.5 V supply that reduces rail-count and thermal footprint inside tightly-packaged instruments. The internal ±7 ppm/°C reference gives good temperature stability without external reference overhead. The 48-LQFP package allows dense layout next to the analog front-end while keeping digital lines short, which is critical for EMI-sensitive measurement chains.
Recomendado
Multiplexed Multi-Channel Systems
In multiplexed data acquisition systems scanning 8, 16, or more channels, the AD7623ASTZRL's SAR architecture avoids the latency penalty of pipeline ADCs so each channel is sampled in a known number of clock cycles. The 1.33 MSPS throughput combined with an external mux like the ADG1408 supports aggregate per-channel rates well above 100 kSPS even on 8-channel boards. The parallel output mode gives lowest deterministic latency, while the serial mode simplifies opto-isolation in industrial systems where channel count is high.
Recomendado
Automatic Test Equipment (ATE)
ATE systems for semiconductor test need fast, deterministic ADC conversion to keep per-pin test times short. The AD7623ASTZRL's 1.33 MSPS SAR throughput, 16-bit no-missing-code resolution, and parallel output mode fit the per-device parametric test pattern where each channel must produce a settled result in microseconds. The single 2.5 V supply simplifies ATE pin-electronics power trees, and the integrated 2.048 V reference removes one external component from the BOM - a meaningful saving on multi-site test heads.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para AD7623ASTZRL — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | AD7623ACPZRL | AD7623ASTZ | AD7622BSTZ |
|---|---|---|---|---|
| Package | 48-LQFP (LFQFP) | 48-LQFP (LFQFP) - same | 48-LQFP (LFQFP) - same | 48-LQFP (LFQFP) - same |
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices |
| Resolution | 16 bit | 16 bit | 16 bit | 16 bit |
| Sample Rate | 1.33 MSPS | 1.33 MSPS | 1.33 MSPS | 0.5 MSPS |
| Architecture | SAR | SAR | SAR | SAR |
| Supply Voltage | 2.5 V single | 2.5 V single | 2.5 V single | 2.5 V single |
| Internal Reference | 2.048 V internal | 2.048 V internal | 2.048 V internal | 2.048 V internal |
| Digital Interface | Parallel / Serial | Parallel / Serial | Parallel / Serial | Parallel / Serial |
| Operating Temperature | -40 °C to +85 °C | Different temp grade; verify | -40 °C to +85 °C | -40 °C to +85 °C |
Principais diferenciais
- 1.33 MSPS is the fastest PulSAR speed grade in the 48-LQFP family (vs AD7622BSTZ)
- No missing codes at 16-bit level (vs AD7622BSTZ)
- Single 2.5 V supply with internal reference simplifies BOM (vs External reference designs)
Notas de projeto
The input driver op amp must settle at the 16-bit level (0.0015%) within the ADC acquisition time - NOT the 0.1% or 0.01% level commonly published on amplifier datasheets. The AD8021 is the recommended driver because it maintains this settling even at gain of 10. Verify driver settling with the actual signal swing, not just datasheet typical values.
Place decoupling capacitors directly on AVDD, DVDD, and REFOUT pins using a low-inductance ground plane. Separate analog (AGND, REFGND) and digital (DGND) grounds and join them at a single point near the ADC. Keep digital data lines short and routed away from IN+ and IN- to minimize coupled noise into the analog front-end.
Do not assume the input driver settles just because the amplifier datasheet claims 0.1% settling. At 16-bit resolution the actual settling target is 0.0015%, which most general-purpose op amps do not meet. Use the AD8021 or AD8476 for guaranteed 16-bit settling. Also ensure CAPA and CAPB reference-buffer bypass capacitors are placed close to the pins per datasheet.
Informações de conformidade
RoHS and REACH compliance per Analog Devices product page. Not AEC-Q100 qualified - this is an industrial-grade part.
