Analog Devices

AD977BRS - 16-Bit 100 kSPS SAR ADC | Analog Devices

N.º da peça: AD977BRS ✓ Ativo
5 V Vdss 50 µW Id 28-pin SSOP Package
MOQ: 1 |

AD977BRS Visão geral

Analog Devices AD977BRS is a 16-bit successive-approximation analog-to-digital converter with a 100 kSPS throughput rate, serial I/O, and a 28-pin SSOP package. It operates from a single 5 V supply, supports unipolar 0 V to 5 V and 0 V to 4 V input ranges plus bipolar 5 V and 3.3 V input ranges, and includes a 50 µW power-down mode.

An ADC is a data-conversion IC that transforms an analog voltage into a digital number for processing, storage, transmission, or control. The AD977 belongs to the successive-approximation ADC family, within the broader ADC and data-converter semiconductor hierarchy. Compared with flash and pipelined converters, a successive-approximation ADC can provide useful resolution and speed in a compact, relatively low-power design for precision acquisition systems.

The AD977BRS converts 16-bit samples at up to 100 kSPS while offering selectable input ranges and external-reference capability. Its single 5 V architecture simplifies system power planning, while the internal 2.5 V reference supports applications that do not require a separate reference source. Maximum power dissipation is 100 mW, and serial output reduces the number of signal lines required to transfer conversion results.

Internally, the converter uses a switched-capacitor successive-approximation architecture. This implementation supports a compact 28-pin SSOP package and is suited to instrumentation, industrial control, communications, and embedded data-acquisition systems. External reference and input-range selections allow designers to balance conversion accuracy, signal conditioning, and system flexibility for different analog input conditions.

Typical uses include multichannel process monitoring, transducer signal acquisition, communications-channel digitizing, industrial sensor interfaces, portable measurement equipment, and laboratory instruments. The 100 kSPS rate is especially appropriate for continuous monitoring signals that require more resolution than a low-cost comparator-based system but do not need flash-converter throughput.

Design around the 5 V supply requirement, selected input range, and 100 mW maximum power dissipation. Place bypass capacitance close to the supply pins, route analog inputs away from fast digital transitions, and use the pin-description table in the manufacturer datasheet when assigning tracks and grounding. The power-down function can reduce consumption during inactive intervals, but system timing must account for startup behavior.

This page organizes the AD977BRS specifications, package information, application guidance, and drop-in replacement considerations into one engineering reference. It also identifies the key electrical, timing, power, and selection trade-offs that matter when adapting an existing 28-SSOP data-acquisition design.

Alternativas drop-in para AD977BRS — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.

Variantes desta série

Modelos da mesma série compatíveis como drop-in com AD977BRS (mesmo formato e footprint) — diferindo em Package, Operating Temperature, Power-Down Mode, Supply Voltage.

Analog Devices
Package: 28-pin SSOP (RS-28)
Operating Temperature: -40 °C to +85 °C
Power-Down Mode: 50 µW
Comparar com AD977BRS →
Analog Devices
Package: 28-pin SSOP, 5.30 mm width
Operating Temperature: -40°C to +85°C
Power-Down Mode: 50 W maximum input power
Comparar com AD977BRS →

AD977BRSZ

✅ Drop-In
Analog Devices
📦 28-pin SSOP
16 bit · Successive approximation (SAR) · Single input · 100 kSPS · 4.75 V to 5.25 V · 2.5 V · Serial, SPI · 100 mW maximum

Consulte o preço

Ver ficha técnica →

AD977BRU

✅ Drop-In ⚠️ Especificações não verificadas
📦 28-pin SSOP
Same AD977 resolution and 100 kSPS throughput in a 28-SSOP package; package suffix differs, so pinout, temperature grade, and finish require verification

📋 Alternativa de referência (fora do catálogo)

AD977ARU

✅ Drop-In ⚠️ Especificações não verificadas
📦 28-pin SSOP
Same 16-bit AD977A-family architecture in a 28-SSOP package, but throughput is 200 kSPS versus 100 kSPS, a 100% increase that requires interface-timing review

📋 Alternativa de referência (fora do catálogo)

AD977BRS Classificações máximas e características elétricas

Resolução 16 bit
Conversion Throughput 100 kSPS
Converter Architecture Successive-approximation switched-capacitor ADC
Tensão de alimentação 5 V
Number of Inputs 1 input
Interface Serial I/O
Unipolar Input Range 1 0 V to 5 V
Unipolar Input Range 2 0 V to 4 V
Bipolar Input Range 1 ±5 V
Bipolar Input Range 2 ±3.3 V
Internal Reference Voltage 2.5 V
Reference Selection Internal or external reference
Maximum Power Dissipation 100 mW
Power-Down Current 50 µW
Process Technology BiCMOS
Encapsulamento 28-pin SSOP
Tipo de montagem Surface mount

Guia de Configuração de Pinos do AD977BRS 28-pin ssop

Configuração de pinos para AD977BRS (pacote 28-pin ssop). Este componente analógico possui pinos de entrada, saída e alimentação. Consulte o datasheet do fabricante para configurações de offset null, compensação e pino de enable. Ideal para circuitos de condicionamento de sinal e amplificadores.

Diagrama de pinagem do pacote 28-pin ssop para AD977BRS

Nenhum dado detalhado de pinagem disponível para AD977BRS.

Consulte a ficha técnica para a configuração completa dos pinos.

Aplicações típicas

AD977BRS é adequado para 6 aplicaçãos: Industrial Process Monitoring, Communications Channel Digitizing, Precision Data-Acquisition Systems, Sensor Signal Conditioning, Portable Measurement Instruments, Medical and Diagnostic Instrumentation.

🏭

Industrial Process Monitoring

The AD977BRS suits process-monitoring systems that repeatedly digitize pressure, temperature, position, or level signals. Its 16-bit resolution preserves small analog changes, while the 100 kSPS rate provides more sampling capacity than slow sensor outputs generally require. Use the 0 V to 5 V or 0 V to 4 V unipolar range for conditioned sensor signals, or the ±5 V and ±3.3 V bipolar options when the front end produces centered signals. The single 5 V supply simplifies controller integration, and the 50 µW power-down mode can reduce consumption during inactive intervals. Add input filtering, surge protection, calibration, and grounding appropriate to the industrial environment.

🌐

Communications Channel Digitizing

The AD977BRS can digitize communication-channel waveforms in radio, telemetry, and control interfaces when the required bandwidth fits its 100 kSPS conversion rate. The 16-bit output preserves amplitude detail, while serial I/O limits the number of data lines between the converter and a digital controller. Select the input range that matches the receiver or amplifier output, and use the external-reference capability when system-level accuracy must be coordinated across multiple converters. Because the 100 kSPS rate is 50% of the AD977A-family 200 kSPS option, verify acquisition bandwidth and serial-output timing before choosing this device for higher-frequency signals.

🖥️

Precision Data-Acquisition Systems

The AD977BRS is appropriate for compact, high-resolution data-acquisition modules in laboratory, portable, and embedded measurement equipment. A 100 kSPS rate supports continuous sampling of many instrumentation signals, while the 16-bit ADC resolution captures variation that lower-resolution converters may quantize away. The single 5 V operating supply reduces rail-count requirements, and selectable unipolar and bipolar ranges accommodate both sensor outputs and conditioned laboratory signals. For a new board, follow the manufacturer reference configuration for bypass capacitors, reference selection, and digital-interface implementation. Confirm settling time and acquisition bandwidth against the intended source impedance.

🧩

Sensor Signal Conditioning

The AD977BRS can serve as the final conversion stage for bridge, pressure, strain, position, and other analog sensor interfaces. Its 16-bit resolution is valuable when the conditioned sensor signal occupies only part of the selected range, while the 100 kSPS throughput allows oversampling relative to many slow mechanical sensors. The ±3.3 V and ±5 V bipolar options can simplify interface to bipolar front ends, and the internal 2.5 V reference provides a convenient default. Use external-reference operation when multiple channels must share a reference or when calibration accuracy requires a dedicated reference. Protect the analog input path from transients and keep sensor returns separate from digital switching currents.

📱

Portable Measurement Instruments

The AD977BRS fits portable meters and field instruments that need more measurement resolution than a simple comparator or low-resolution converter while remaining limited to a single 5 V supply. At 100 kSPS, it can capture repetitive measurements and waveforms within the acquisition bandwidth of the instrument. The power-down mode, specified at 50 µW, is valuable when the instrument spends substantial time between measurement bursts. Designers should still budget the 100 mW maximum device dissipation during active conversion and use the manufacturer power-down and startup guidance to avoid reading unsettled data. The 28-SSOP package also supports compact layouts compared with larger through-hole converter options.

💊

Medical and Diagnostic Instrumentation

The AD977BRS may be used in diagnostic and monitoring instruments when the signal bandwidth is compatible with 100 kSPS conversion and the system requires 16-bit digital resolution. Suitable examples include slow physiological trend acquisition and controlled laboratory measurement blocks rather than wideband waveform capture. The selectable input ranges allow connection to bipolar front ends with appropriate scaling, while the internal 2.5 V reference or external-reference option supports different calibration architectures. Medical designs must add the required protection, isolation, leakage control, and regulatory validation at the system level. Do not infer medical certification from the ADC specifications, and verify all timing and accuracy limits against the current manufacturer datasheet.

What is the AD977BRS?
The AD977BRS is a 16-bit, 100 kSPS successive-approximation ADC with serial I/O in a 28-pin SSOP package. According to the Analog Devices AD977/AD977A product documentation, it operates from a single 5 V supply and supports unipolar 0 V to 5 V or 0 V to 4 V inputs, along with bipolar ±5 V and ±3.3 V input options. Its switched-capacitor architecture and selectable reference arrangement make it appropriate for precision instrumentation and embedded data-acquisition systems.
What is the conversion rate of AD977BRS?
The AD977BRS provides a maximum conversion throughput of 100 kSPS. According to the Analog Devices AD977/AD977A product documentation, the closely related AD977A configuration operates at 200 kSPS, while AD977BRS is the 100 kSPS version. At 100 kSPS, one conversion occupies approximately 10 µs before allowing for acquisition and digital-interface overhead, making the converter suitable for continuous monitoring of slowly changing or moderate-bandwidth analog signals.
What supply voltage does AD977BRS use?
The AD977BRS operates from a single 5 V supply. According to the Analog Devices AD977/AD977A product documentation, this supply arrangement supports the converter core, internal 2.5 V reference, analog input section, and serial interface. Designers should include suitable supply bypass capacitance and route the analog and digital return currents carefully to minimize conversion noise. The manufacturer datasheet remains the controlling reference for capacitor values, timing, and pin-specific layout requirements.
What input voltage ranges are supported by AD977BRS?
The AD977BRS supports 0 V to 5 V and 0 V to 4 V unipolar inputs, plus ±5 V and ±3.3 V bipolar inputs. According to the Analog Devices AD977/AD977A documentation, the exact range is selected through the device configuration. The range must match the analog signal and front-end design; over-range operation cannot be assumed safe. Use the manufacturer input-characteristics tables and absolute-maximum-rating section when designing front-end attenuation, amplification, or level shifting.
Is the AD977BRS a successive-approximation ADC?
Yes, the AD977BRS is a 16-bit successive-approximation, switched-capacitor ADC. According to the Analog Devices AD977/AD977A product documentation, this architecture converts at up to 100 kSPS while operating from a single 5 V supply. It is distinct from flash and pipelined converters: the selected architecture prioritizes 16-bit resolution and compact implementation for instrumentation, communications, and industrial-control acquisition rather than maximum sampling throughput.
What is the difference between AD977BRS and AD977BRSZ?
The AD977BRSZ is a closely related 28-SSOP ordering variant of the AD977, while AD977BRS is the standard suffix shown in the available manufacturer and distributor documentation. According to Analog Devices product information, the underlying AD977/AD977A family provides 16-bit conversion from a single 5 V supply. Before treating AD977BRSZ as a drop-in replacement, confirm temperature grade, finish, ordering suffix, and lifecycle status against the manufacturer datasheet and your existing bill of materials.
What can replace AD977BRS?
The closest documented same-family replacement is AD977BRSZ, but it should be treated as a drop-in option only after confirming the ordering suffix and temperature grade in the Analog Devices datasheet. The AD977 and AD977A family also contains related 28-SSOP members, including 100 kSPS and 200 kSPS configurations. No verified cross-brand, pin-compatible 28-SSOP replacement was identified, so an equivalent from another manufacturer should not be assumed to work without a new design review.
When should I choose AD977BRS instead of a 200 kSPS AD977A-family device?
Choose AD977BRS when 100 kSPS throughput is sufficient and the system does not require the faster 200 kSPS option associated with the AD977A family. According to Analog Devices product documentation, both families use a 16-bit successive-approximation architecture and a single 5 V supply. The slower device can reduce design complexity when the input bandwidth does not justify a higher sampling rate, provided the acquisition, serial-output, and system-latency requirements are still met.
Is AD977BRS suitable for industrial sensor acquisition?
The AD977BRS is suitable for many industrial sensor-acquisition applications that require 16-bit resolution at up to 100 kSPS. According to the Analog Devices AD977/AD977A documentation, it supports several unipolar and bipolar input ranges and external-reference operation. A practical design must add front-end conditioning, surge protection, grounding, and input filtering appropriate to the sensor. Verify analog bandwidth, common-mode limits, settling time, and calibration requirements before finalizing the signal chain.
How much power does AD977BRS dissipate?
The AD977BRS has a maximum specified power dissipation of 100 mW. According to the Analog Devices AD977/AD977A documentation, the device also provides a power-down mode with a stated 50 µW power-down current. Actual board-level consumption depends on supply voltage, operating state, conversion activity, and external circuitry. The 28-SSOP package and stated maximum dissipation allow straightforward thermal review, but ambient temperature and copper-area effects must still be considered in the final design.
Where can I download the AD977BRS datasheet PDF?
The official AD977BRS documentation is available from Analog Devices through the AD977 product page at https://www.analog.com/en/products/ad977.html. That manufacturer resource provides the authoritative product description, family data, ordering information, and link to the AD977/AD977A datasheet. Use the pin-description table and electrical-characteristics tables for PCB assignment, timing, input-range configuration, and design-limit checks rather than relying on a distributor summary.
Where can I find the AD977BRS pinout?
The AD977BRS pinout is found in the AD977/AD977A manufacturer datasheet, using the 28-pin SSOP package drawing and pin-description table. The converter includes digital interface, analog input, reference, supply, and configuration functions, so every track should be assigned from that table. Before layout release, verify signal direction, analog input range selection, reference connections, supply pins, and exposed routing requirements directly against the current Analog Devices documentation.
Where can I buy AD977BRS online?
Use the Request a Quote form on this XAIPART page to request AD977BRS pricing, availability, and lead time for the exact 28-SSOP ordering code. The form captures the MPN AD977BRS so that the quote can be matched to the required package and suffix. For production planning, request a dated availability statement and clarify minimum order quantity, production schedule, and permitted change notifications before authorizing a purchase.
What is the price of AD977BRS?
Current AD977BRS pricing is generated through the Request a Quote form on this XAIPART page rather than displayed as a static value. Submit the exact MPN AD977BRS and the required quantity so the quote reflects the correct 28-SSOP device, any authorized sourcing route, and the requested delivery schedule. For repeat builds, request volume-break terms and a price-validity period while also confirming that any quotation remains tied to the exact AD977BRS suffix.
Is AD977BRS in stock and what is its lead time?
Use the Request a Quote form on this page to request current AD977BRS inventory status, minimum order quantity, and lead time. Because stock and production timing can change, treat an availability statement as valid only for the quoted quantity and requested date. If the AD977BRS is unavailable, ask whether AD977BRSZ satisfies the required electrical, temperature, finish, and package conditions before authorizing any substitution or board change.
What are the key specifications of AD977BRS that engineers should know?
The key AD977BRS specifications are 16-bit resolution, 100 kSPS throughput, serial I/O, a single 5 V supply, and a 28-pin SSOP package. According to the Analog Devices AD977/AD977A documentation, the converter also supports 0 V to 5 V, 0 V to 4 V, ±5 V, and ±3.3 V input ranges, an internal 2.5 V reference, external-reference capability, 100 mW maximum power dissipation, and a 50 µW power-down mode.

Dados de referência de engenharia para AD977BRS — comparação, orientação de projeto e informações de conformidade.

Guia de seleção

Choose AD977BRS for a 28-SSOP design requiring a 16-bit successive-approximation ADC at up to 100 kSPS from a single 5 V supply. It is well matched to industrial monitoring, precision data acquisition, communications-channel digitization, and conditioned sensor signals when 0 V to 5 V, 0 V to 4 V, ±5 V, or ±3.3 V inputs are useful. AD977BRSZ is the closest documented ordering alternative, but verify the exact suffix, temperature grade, and finish before approving it. AD977BRU belongs to the same family and package class, but its ordering details require datasheet confirmation. AD977ARU provides 200 kSPS, making it preferable only when the additional bandwidth justifies reviewing acquisition and serial-interface timing. No verified cross-brand drop-in replacement was found; changing manufacturers therefore requires a complete pin, timing, accuracy, and lifecycle review rather than a simple board substitution.

Comparação com alternativas

Parâmetro Este produto AD977BRSZ AD977BRU AD977ARU
Package 28-pin SSOP 28-pin SSOP 28-pin SSOP 28-pin SSOP
Brand Analog Devices Analog Devices Analog Devices Analog Devices
Resolution 16 bit 16 bit 16 bit 16 bit
Conversion Throughput 100 kSPS 100 kSPS 100 kSPS 200 kSPS
Supply Voltage 5 V 5 V 5 V 5 V
Interface Serial I/O Serial I/O Serial I/O Serial I/O

Principais diferenciais

  • Direct 100 kSPS match for moderate-bandwidth acquisition (vs AD977ARU)
  • Same-package ordering alternative with identical headline conversion specifications (vs AD977BRSZ)
  • Single-supply operation with broad selectable input ranges (vs AD977BRU)

Notas de projeto

Assign every connection from the 28-pin SSOP pin-description table and keep analog input traces away from serial clock, data, and supply-switching traces. Place input filtering and the converter as close together as practical to minimize capacitive noise pickup. Use a continuous ground reference beneath and around the device, avoid routing sensitive analog signals over split plane boundaries, and follow the manufacturer reference layout for bypass-capacitor placement and single-ended grounding.

Design the 5 V rail for both transient demand and converter dissipation. The AD977BRS maximum power dissipation is 100 mW, but upstream regulators, reference circuitry, interface drivers, and protection networks can create additional local heating. Place the required bypass capacitance at the supply pins, keep analog and digital return-current paths controlled, and verify the 28-SSOP thermal performance using the manufacturer's junction-temperature guidance and the actual board copper area.

Establish the acquisition time before selecting input-range components and sampling rate. Source impedance, input capacitance, bandwidth, and the 100 kSPS conversion cadence determine whether the input settles accurately between conversions. Use the manufacturer input-impedance and acquisition specifications rather than assuming that every sensor can drive the selected range directly. If source impedance is high, add a low-noise, low-capacitance buffer and include its offset and noise in the system error budget.

Do not treat AD977BRS, AD977BRSZ, and AD977A-family devices as interchangeable solely because they use the same 28-SSOP outline. AD977A-family options can provide 200 kSPS rather than 100 kSPS, while ordering suffixes may change temperature grade, finish, or lifecycle conditions. Confirm the exact ordering code, acquisition timing, serial-interface timing, reference configuration, and production status before releasing a substitution into manufacturing.

Informações de conformidade

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Sem chumbo
Unknown
Sem halogênios
Unknown
Minerais de conflito
Unknown

No explicit compliance declarations were identified in the available manufacturer product description. Confirm RoHS, REACH, lead-free, halogen-free, and conflict-mineral status against the current Analog Devices product documentation and the exact ordering suffix before production release.

Dados verificados em: 2026-11-10 — dados verificados e curados pela equipe de engenharia de componentes da XAIPART

Buscas relacionadas

AD977BRS datasheet AD977BRS pinout AD977BRS datasheet pdf AD977BRS equivalent AD977BRS replacement AD977BRS cross reference AD977BRS price AD977BRS stock Analog Devices AD977BRS AD977BRS 16 bit 100 kSPS ADC AD977BRS 28 pin SSOP AD977BRS serial ADC application AD977BRS vs AD977BRSZ AD977BRS 5 V supply

Componentes & termos relacionados

Analog Devices AD977BRS AD977BRSZ AD977BRU AD977ARU AD977 AD977A successive-approximation ADC switched-capacitor ADC analog-to-digital converter data converter semiconductor serial I/O single 5 V supply 16-bit resolution 100 kSPS 200 kSPS internal 2.5 V reference external reference unipolar input bipolar input 28-pin SSOP SSOP package surface-mount package industrial data acquisition
RFQ de cotação rápida
Preencha todos os detalhes — nossa equipe de vendas responderá em até 24 horas
Part number Fabricante Encapsulamento QTY Preço-alvo Total
✓
Cotação enviada!

Responderemos seu e-mail em até 24 horas

1
RFQ enviada
2
Cotação recebida
3
Pedido realizado
4
Pagamento
5
Enviado
6
Entregue
Ver detalhes da RFQ