Analog Devices

ADF4356BCPZ-RL7 - 6.8 GHz PLL Synthesizer | Analog Devices

N.º da peça: ADF4356BCPZ-RL7 ✓ Ativo
3.15 V to 3.45 V Vdss 32-lead WFQFN exposed-pad package Package 3400 MHz to 6800 MHz Speed
MOQ: 1 |

ADF4356BCPZ-RL7 Visão geral

The Analog Devices ADF4356BCPZ-RL7 is a fractional-N or integer-N phase-locked-loop frequency synthesizer with an integrated voltage-controlled oscillator, a maximum RF output frequency of 6.8 GHz, and a 32-lead WFQFN exposed-pad package. Its fundamental VCO covers 3400 MHz to 6800 MHz, while programmable dividers extend the usable RF output range down to 53.125 MHz.

A frequency synthesizer is a clock-and-timing IC that locks an internal voltage-controlled oscillator to an external reference frequency. The ADF4356 belongs to the phase-locked-loop family, where the phase-locked-loop synthesizer hierarchy supports stable RF carrier generation for integer-N channels or fine fractional-N channel spacing. The device requires an external reference, loop filter, and passive loop-filter components to complete the feedback network.

Key features include programmable fractional-N and integer-N operation, an integrated VCO, output division by 1, 2, 4, 8, 16, 32, or 64, hardware and software power-down modes, and pin-programmable or software-controlled RF output muting. Analog and digital power rails operate from 3.15 V to 3.45 V, while the charge pump and VCO supply operate from 4.75 V to 5.25 V. These separate supply domains support careful partitioning of noisy, sensitive, and digital circuitry.

The synthesizer architecture allows the loop bandwidth, reference path, channel spacing, and output frequency to be configured through its serial programming interface. Its RF output stages can generate fundamental VCO frequencies or divided outputs as low as 53.125 MHz. The external loop filter remains a critical analog network because it converts phase-detector current into the VCO control voltage and directly influences phase noise, reference spur performance, lock time, and channel-to-channel isolation.

Typical applications include 6 GHz wireless infrastructure, microwave backhaul, radar test equipment, satellite and microwave communications, RF instrumentation, and local-oscillator generation for mixers or upconverters. The 6.8 GHz ceiling is particularly useful for short-wavelength wireless systems operating near the lower portion of the 6 GHz band. For lower-frequency equipment, the output divider reduces the fundamental oscillator frequency without requiring a second synthesizer.

PCB implementation should preserve the integrity of the reference, charge-pump, loop-filter, and RF output paths. Place the loop-filter components close to their associated pins, keep the exposed thermal pad connected to a low-impedance ground plane, and follow the manufacturer reference design for component values and trace geometry. Account for the added Register 13 when moving from ADF4355-based firmware to the ADF4356 initialization sequence.

This page combines manufacturer specifications, verified commercial availability, replacement analysis, and application-specific engineering guidance to support component selection and board bring-up. It also distinguishes direct physical replacements from related synthesizers whose frequency range, control interface, or firmware requirements make them less suitable for a drop-in substitution.

Alternativas drop-in para ADF4356BCPZ-RL7 — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.

Nenhuma alternativa drop-in disponível para este produto.

Solicitar alternativas

ADF4356BCPZ-RL7 Especificações

Product Type Fractional-N and integer-N PLL frequency synthesizer
Integrated VCO Fundamental Frequency Range 3400 MHz to 6800 MHz
Maximum RF Output Frequency 6800 MHz
Minimum Divided RF Output Frequency 53.125 MHz
Output Divider Ratios 1, 2, 4, 8, 16, 32, or 64
Analog and Digital Supply Voltage Range 3.15 V to 3.45 V
Charge Pump and VCO Supply Voltage Range 4.75 V to 5.25 V
Number of Channels 1
Encapsulamento 32-lead WFQFN exposed-pad package
Tipo de montagem Surface mount
Power-Down Modes Hardware and software
RF Output Muting Pin-programmable and software-programmable
Phase-Locked-Loop Type Fractional-N or integer-N

Guia de Configuração de Pinos do ADF4356BCPZ-RL7 32-lead wfqfn exposed-pad package

Configuração de pinos para ADF4356BCPZ-RL7 (pacote 32-lead wfqfn exposed-pad package). A numeração dos pinos, funções e diagramas de conexão estão definidos no datasheet do fabricante. Consulte-o para o footprint exato e diretrizes de soldagem.

Diagrama de pinagem do pacote 32-lead wfqfn exposed-pad package para ADF4356BCPZ-RL7

Nenhum dado detalhado de pinagem disponível para ADF4356BCPZ-RL7.

Consulte a ficha técnica para a configuração completa dos pinos.

Aplicações típicas

ADF4356BCPZ-RL7 é adequado para 6 aplicaçãos: 6 GHz Wireless Infrastructure, Microwave Backhaul Local Oscillator, Radar and RF Test Equipment, Satellite and Microwave Communications, RF Instrumentation, Low-Frequency IF and Divider Output.

🌐

6 GHz Wireless Infrastructure

The ADF4356BCPZ-RL7 is well matched to 6 GHz wireless local-oscillator and carrier-generation requirements because its integrated VCO operates from 3400 MHz to 6800 MHz. The synthesizer can support fractional-N channel spacing while also operating in integer-N mode for less demanding frequency plans. A typical design feeds a clean reference into the phase-locked loop, filters the charge-pump current, and routes the resulting RF output toward a mixer or transmit chain. The 6.8 GHz ceiling covers the lower portion of the 6 GHz band, but phase noise and adjacent-channel rejection remain functions of reference quality, loop bandwidth, and the external filter.

🌐

Microwave Backhaul Local Oscillator

The ADF4356BCPZ-RL7 can generate a programmable local oscillator for microwave backhaul receivers and transmitters requiring frequencies below 6.8 GHz. Its output dividers reduce the fundamental VCO signal into six lower-frequency ratios, allowing one synthesizer to cover receiver and transmit-frequency plans. In the circuit, the ADF4356 locks to an external reference and the loop filter controls phase noise and lock behavior. Designers should place the RF output path and loop filter away from switching supplies and digital return currents, then verify reference spur rejection under the final reference frequency and channel spacing.

🔧

Radar and RF Test Equipment

The ADF4356BCPZ-RL7 supports programmable RF test sources covering 53.125 MHz to 6800 MHz through its integrated VCO and output-divider options. This flexibility lets laboratory equipment move between low-frequency IF tests and microwave signal-generation tests without relying on several separate oscillators. The synthesizer is used with an external reference and loop filter, while its programmable register interface supports automated frequency changes. For measurement-grade performance, characterize phase noise, reference spurs, and settling time with the intended reference and firmware configuration rather than relying on nominal frequency accuracy alone.

🌐

Satellite and Microwave Communications

The ADF4356BCPZ-RL7 is applicable to microwave communication subsystems that need a programmable local oscillator with fractional channel spacing. Its maximum VCO frequency of 6800 MHz permits direct synthesis near the upper range of the device specification, while the divider chain supports lower-frequency intermediate signals. The circuit architecture requires a stable reference, charge-pump loop filter, and RF output network. Engineers should account for temperature drift, reference multiplication ratio, and loop-filter component tolerance because these factors directly influence frequency stability and spur performance in the communication channel.

🔧

RF Instrumentation

The ADF4356BCPZ-RL7 can serve as the RF source in instrumentation covering wide frequency ranges when paired with a suitable reference and output divider. Programmable fractional-N operation allows the instrument to select exact test frequencies, while integer-N operation can simplify configurations where very fine channel spacing is unnecessary. The synthesizer should be mounted on a controlled-impedance RF layout with short output paths and solid return-plane continuity. Calibration must include the attenuation, frequency-dependent loss, and phase response of the complete signal path because the synthesizer itself is only one contributor to traceable measurement accuracy.

📡

Low-Frequency IF and Divider Output

The ADF4356BCPZ-RL7 can produce divided outputs down to 53.125 MHz by applying the available division ratios to its 3400 MHz to 6800 MHz VCO signal. This capability supports IF-generation and local-oscillator roles where a conventional high-frequency oscillator would be unnecessary. The output divider reduces RF frequency while the phase-locked loop maintains phase coherence with the reference. Designers should select the lowest divider that meets the required frequency, preserve adequate output drive, and verify that divider harmonics do not interfere with sensitive receiver or analyzer stages.

What is the ADF4356BCPZ-RL7?
The ADF4356BCPZ-RL7 is a single-channel fractional-N and integer-N phase-locked-loop frequency synthesizer with an integrated VCO. According to the Analog Devices ADF4356 datasheet, its fundamental VCO operates from 3400 MHz to 6800 MHz, and programmable division allows RF outputs from 53.125 MHz to 6800 MHz. It is packaged in a 32-lead WFQFN exposed-pad package for surface-mounted RF and microwave signal-generation designs.
What output frequency range does ADF4356BCPZ-RL7 support?
The ADF4356BCPZ-RL7 supports an RF output range from 53.125 MHz to 6800 MHz. The Analog Devices datasheet identifies a 3400 MHz to 6800 MHz fundamental range for the integrated VCO and output division ratios of 1, 2, 4, 8, 16, 32, and 64. Division lets the same synthesizer serve lower-frequency test equipment and local-oscillator applications without adding another VCO.
What supply voltages are required for ADF4356BCPZ-RL7?
The ADF4356BCPZ-RL7 requires 3.15 V to 3.45 V for its analog and digital supplies and 4.75 V to 5.25 V for the charge pump and VCO supplies. The Analog Devices datasheet documents these separate supply domains, which help isolate the sensitive VCO and charge-pump circuitry from logic supply noise. Decoupling and power sequencing should follow the manufacturer's recommended layout and reference design.
Where can I download the ADF4356BCPZ-RL7 datasheet PDF?
The official ADF4356 datasheet PDF is available from Analog Devices at https://www.analog.com/media/en/technical-documentation/data-sheets/ADF4356.pdf. It contains the pin descriptions, register map, electrical characteristics, power-supply requirements, loop-filter guidance, and application information needed for a complete design. The manufacturer's ADF4356 product page also provides programming software and links to evaluation hardware.
Where can I find the ADF4356BCPZ-RL7 pinout?
The authoritative ADF4356BCPZ-RL7 pinout is shown in the pin-configuration section of the Analog Devices ADF4356 datasheet. The device uses a 32-lead WFQFN exposed-pad package. Use that table when assigning power, ground, reference, programming, charge-pump, and RF-output nets because exposed-pad and thermal-pad connections must also follow the package drawing and land pattern.
What are the key specifications of ADF4356BCPZ-RL7?
The principal ADF4356BCPZ-RL7 specifications are a 3400 MHz to 6800 MHz integrated-VCO range, output operation from 53.125 MHz to 6800 MHz, and division ratios from 1 through 64. The Analog Devices datasheet also specifies 3.15 V to 3.45 V analog and digital supplies, 4.75 V to 5.25 V charge-pump and VCO supplies, hardware and software power-down, and programmable output muting. The package is a 32-lead WFQFN with an exposed pad.
Where can I buy ADF4356BCPZ-RL7 online?
Use the Request a Quote form on this page to request ADF4356BCPZ-RL7 pricing, current inventory, order quantities, and delivery scheduling. The part is also listed under the exact order code by authorized distribution channels, but commercial conditions can change quickly. Providing the target quantity, reel packaging requirement, and destination country through the quote form gives the purchasing team the information needed for a current quotation.
What is the price of ADF4356BCPZ-RL7?
Submit the ADF4356BCPZ-RL7 order details through the Request a Quote form on this page for a current unit price and quantity schedule. Pricing for this synthesizer depends on order quantity, reel packaging, market conditions, and inventory status. The form avoids presenting a static quotation that may no longer reflect current commercial availability.
What is the lead time for ADF4356BCPZ-RL7?
Request the current lead time through the Request a Quote form on this page. The form should state the required quantity, 7-inch reel packaging, shipment destination, and whether scheduled deliveries are acceptable. Because lead time depends on factory scheduling and current component inventory, the purchasing team should confirm both the earliest delivery and the expected schedule before committing the production build.
Is ADF4356BCPZ-RL7 in stock?
Use the Request a Quote form on this page to check current stock and the allocation required for your order. The exact suffix ADF4356BCPZ-RL7 identifies the 7-inch reel ordering configuration, so include that full MPN in the request. A written inventory confirmation is preferable for production planning because availability can change between quotation and order placement.
What is the best drop-in replacement for ADF4356BCPZ-RL7?
No verified drop-in replacement should be selected solely from the available cross-reference results. ADF4356BCPZ is the same core device without the RL7 ordering suffix, but it represents a different reel-delivery configuration rather than a distinct substitute. ADF4355-family devices use the same general package family but require different initialization details, including Register 13. Confirm package, frequency range, firmware, and supply requirements before replacing the exact target MPN.
Can ADF4355BCPZ-RL7 replace ADF4356BCPZ-RL7?
ADF4355BCPZ-RL7 can serve as a physical upgrade path in a suitable design, but it is not an unconditional drop-in substitute. Analog Devices application note AN-1445 describes replacing the ADF4355BCPZ with the ADF4356BCPZ and updating the initialization sequence with Register 13. The maximum RF capability and software configuration must therefore be reviewed before treating either part as interchangeable.
ADF4356BCPZ-RL7 vs ADF4356BCPZ: which ordering code should I use?
ADF4356BCPZ-RL7 is the target order code for 7-inch reel packaging, while ADF4356BCPZ is the base device designation commonly shown for other delivery configurations. Both identify the same ADF4356 core family and 32-lead WFQFN architecture, but procurement should compare the complete ordering suffix, reel quantity, moisture requirements, and approved source. Do not substitute one suffix solely because the base MPN appears similar.
When should I choose ADF4356BCPZ-RL7 over ADF4355BCPZ-RL7?
Choose ADF4356BCPZ-RL7 when the design requires a higher maximum synthesized frequency than the ADF4355 family can provide. The ADF4356 has an integrated-VCO fundamental range of 3400 MHz to 6800 MHz and supports fractional-N operation through 6.8 GHz. For an existing ADF4355 design, follow Analog Devices AN-1445 because the initialization sequence includes an ADF4356-specific register.
Is ADF4356BCPZ-RL7 suitable for 6 GHz wireless infrastructure?
The ADF4356BCPZ-RL7 is suitable for many 6 GHz wireless infrastructure local-oscillator and channel-synthesis designs. Its integrated VCO reaches 6800 MHz, covering the lower 6 GHz range, while fractional-N operation supports fine channel spacing. RF shielding, reference isolation, loop-filter design, and output-divider selection still determine phase-noise and spur performance in the completed system.

Dados de referência de engenharia para ADF4356BCPZ-RL7 — comparação, orientação de projeto e informações de conformidade.

Guia de seleção

Choose the ADF4356BCPZ-RL7 for compact RF systems requiring programmable synthesis from 53.125 MHz to 6800 MHz, especially when fractional-N spacing and integrated-VCO operation simplify the design. Its 32-lead WFQFN exposed-pad package requires careful grounding, controlled-impedance RF routing, and a well-designed external loop filter. The 3.15 V to 3.45 V and 4.75 V to 5.25 V supply domains should be decoupled according to the manufacturer reference design. Consider the ADF4355 family only when an existing board and firmware can be updated according to ADI application note AN-1445. Do not treat the base ADF4356BCPZ ordering code as a distinct replacement; it primarily changes the delivery designation. Cross-brand integrated PLL synthesizers may offer different frequency ranges and interfaces, but none of the identified candidates can be confirmed as a pin-for-pin, parameter-matched drop-in replacement for this exact 32-lead WFQFN device.

Comparação com alternativas

Parâmetro Este produto
Package 32-lead WFQFN exposed-pad package
Brand Analog Devices
Fundamental VCO Frequency Range 3400 MHz to 6800 MHz
Maximum RF Output Frequency 6800 MHz
Minimum Divided RF Output Frequency 53.125 MHz
Output Divider Ratios 1, 2, 4, 8, 16, 32, or 64
Analog and Digital Supply Voltage 3.15 V to 3.45 V
Charge Pump and VCO Supply Voltage 4.75 V to 5.25 V
PLL Architecture Fractional-N or integer-N
Power-Down Modes Hardware and software

Principais diferenciais

  • Higher integrated-VCO operating ceiling than the ADF4355 family (vs ADF4355BCPZ-RL7)
  • Broad programmable output division for mixed-frequency designs (vs ADF4355BCPZ-RL7)
  • Exact reel-configured ordering option (vs ADF4356BCPZ)

Notas de projeto

Route the charge-pump output and loop-filter components directly between their associated pins and ground reference without long shared traces. Keep the external filter away from RF output and switching-node copper where possible. The filter converts charge-pump current into the VCO tuning voltage, so even modest leakage or added capacitance can change loop dynamics, phase noise, and lock behavior. Use the Analog Devices ADF4356 reference layout to preserve component values, grounding, and isolation.

Use separate, well-decoupled connections for the 3.15 V to 3.45 V analog and digital supplies and the 4.75 V to 5.25 V charge-pump and VCO supply. Place local high-frequency bypass capacitors at the supply pins and keep supply-return paths continuous through the exposed ground pad. Because the VCO and charge pump are sensitive to supply disturbance, regulator placement and return-current routing can influence phase noise and reference-spur performance even when the nominal supply voltages are correct.

Do not treat an ADF4355 device as an unconditional software-compatible replacement for the ADF4356. Analog Devices application note AN-1445 identifies an initialization change involving Register 13 and describes removal or adaptation of the R SET resistor on Pin 22. Review the complete register sequence, R SET configuration, reference ratio, loop filter, and target output frequency before reusing an existing board or firmware. A physical package fit alone does not establish functional equivalence.

Design the RF output path as a controlled-impedance structure with short connections and a continuous ground reference. Avoid placing test pads, long branch runs, or unrelated digital traces near the RF outputs. When using an output divider, verify the selected ratio produces the required frequency and check that divider harmonics remain below the sensitivity of the downstream receiver. Final spur and isolation measurements should use the complete board because package and enclosure details can materially affect RF performance.

Informações de conformidade

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Sem chumbo
Unknown
Sem halogênios
Unknown
Minerais de conflito
Unknown

Compliance declarations require confirmation from the current manufacturer product documentation or a declaration associated with the exact ordering code.

Dados verificados em: 2026-11-20 — dados verificados e curados pela equipe de engenharia de componentes da XAIPART

Buscas relacionadas

ADF4356BCPZ-RL7 datasheet ADF4356BCPZ-RL7 pinout ADF4356BCPZ-RL7 datasheet pdf ADF4356BCPZ-RL7 equivalent ADF4356BCPZ-RL7 replacement ADF4356BCPZ-RL7 cross reference ADF4356BCPZ-RL7 footprint ADF4356BCPZ-RL7 price ADF4356BCPZ-RL7 stock Analog Devices ADF4356BCPZ-RL7 ADF4356 6.8 GHz PLL synthesizer ADF4356BCPZ-RL7 vs ADF4355BCPZ-RL7

Componentes & termos relacionados

Analog Devices ADF4356BCPZ-RL7 ADF4356 ADF4355BCPZ-RL7 ADF4355 fractional-N PLL integer-N PLL phase-locked loop frequency synthesizer voltage-controlled oscillator VCO clock and timing IC integrated circuit semiconductor 32-lead WFQFN QFN family surface mount SMD charge pump loop filter RF output divider reference spur phase noise 7-inch reel Analog Devices application note AN-1445
RFQ de cotação rápida
Preencha todos os detalhes — nossa equipe de vendas responderá em até 24 horas
Part number Fabricante Encapsulamento QTY Preço-alvo Total
✓
Cotação enviada!

Responderemos seu e-mail em até 24 horas

1
RFQ enviada
2
Cotação recebida
3
Pedido realizado
4
Pagamento
5
Enviado
6
Entregue
Ver detalhes da RFQ