Analog Devices

ADM211EARS - 4/5 RS-232 Transceiver, 200 kbps | Analog Devices

N.º da peça: ADM211EARS ✗ Fim de vida
5 V Vdss 28-lead SSOP Package
MOQ: 1 |

ADM211EARS Visão geral

The Analog Devices ADM211EARS is a 4-driver, 5-receiver RS-232 interface transceiver operating from a single +5 V supply in a 28-lead SSOP package. It supports data rates up to 200 kbps and is designed for EIA-232-E and CCITT V.28 communications interfaces. The device includes a 0.1 µF charge-pump capacitor capability, low-power shutdown support, and ±15 kV ESD protection on its line-facing pins.

An RS-232 transceiver is a bidirectional interface IC that converts logic-level UART signals into RS-232 line levels and converts received RS-232 levels back into CMOS-compatible logic. The ADM211EARS belongs to the broader hierarchy of RS-232 interface transceivers, line drivers, line receivers, and communications interface ICs. Its multi-channel arrangement allows one package to carry four outgoing data channels and five incoming channels, reducing the component count in multi-port equipment.

Key features include four drivers, five receivers, operation from a single 5 V rail, and data rates up to 200 kbps. The shutdown control disables the charge pump, transmitters, and receivers, allowing the interface to reduce power consumption when communication is inactive. Analog Devices identifies the family as conforming to the EIA-232-E and CCITT V.28 specifications and as suitable for environments where a 12 V supply is unavailable.

The ADM211EARS uses the ADM2xxE interface architecture for robust point-to-point RS-232 links. Its line-facing protection is specified at ±15 kV ESD, making it applicable to equipment whose serial ports may be connected externally or through long cable runs. The interface operates from 5 V, allowing it to share a common supply rail with CMOS logic in many embedded and industrial control systems.

Typical uses include industrial serial controllers, point-of-sale terminals, test equipment, data acquisition systems, and multi-channel RS-232 port expansion. The four drivers and five receivers make the part especially useful where a system has more peripheral serial links than a single UART can support. Because the part is obsolete, new designs should verify availability and consider a listed parametric equivalent before committing a new design to this exact suffix.

For layout, route each RS-232 line directly to its corresponding connector-side network and place the specified 0.1 µF charge-pump capacitor close to the device. Keep logic-side traces away from cable-side inputs, and confirm the shutdown-control polarity and timing against the ADM211E datasheet before enabling the interface in firmware.

This page consolidates the ADM211EARS lifecycle position, verified equivalent candidates, package information, interface parameters, and practical integration guidance so engineers can evaluate an obsolete 28-SSOP transceiver without repeating the same cross-reference work.

Alternativas drop-in para ADM211EARS — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.

Variantes desta série

Modelos da mesma série compatíveis como drop-in com ADM211EARS (mesmo formato e footprint) — diferindo em Maximum Data Rate, Package, Product Type.

Analog Devices
Maximum Data Rate: 230 kbps
Package: 28-pin SSOP
Product Type: RS-232 line-driver and receiver transceiver
Comparar com ADM211EARS →

ADM211ARSZ

✅ Drop-In
Analog Devices
📦 28-SSOP
RS-232 transceiver · 4 channels · 5 channels · 5 V · 200 kbps · 0.1 uF · EIA-232-E and V.28 · CMOS

Consulte o preço

Ver ficha técnica →

ADM211EARSZ

✅ Drop-In
Analog Devices
📦 28-SSOP
RS-232 line-driver and receiver transceiver · 4 · 5 · 4.5 V to 5.5 V · 5 V · 230 kbps · 0.1 µF · EIA-232E and CCITT V.28

Consulte o preço

Ver ficha técnica →

ADM211EARS Especificações

Product Type RS-232 transceiver
Driver Count 4 drivers
Receiver Count 5 receivers
Tensão de alimentação 5 V
Maximum Data Rate 200 kbps
Interface Standard EIA-232-E and CCITT V.28
Encapsulamento 28-lead SSOP
Tipo de montagem Surface mount
ESD Protection ±15 kV
Charge-Pump Capacitor 0.1 µF
Shutdown Function Disables the charge pump, transmitters, and receivers
EMI/EMC Compliance EMI/EMC-compliant
Número de pinos 28 pins

Guia de Configuração de Pinos do ADM211EARS 28-lead ssop

Configuração de pinos para ADM211EARS (pacote 28-lead ssop). A numeração dos pinos, funções e diagramas de conexão estão definidos no datasheet do fabricante. Consulte-o para o footprint exato e diretrizes de soldagem.

Diagrama de pinagem do pacote 28-lead ssop para ADM211EARS

Nenhum dado detalhado de pinagem disponível para ADM211EARS.

Consulte a ficha técnica para a configuração completa dos pinos.

Aplicações típicas

ADM211EARS é adequado para 6 aplicaçãos: Industrial Serial Port Expansion, Point-of-Sale Terminal Interface, Data Acquisition and Test Equipment, Legacy Computer Serial Backplane, Instrument Communication Hub, Maintenance of Legacy RS-232 Equipment.

🏭

Industrial Serial Port Expansion

The ADM211EARS fits legacy industrial controllers that need more RS-232 links than a single UART can provide. Its four drivers and five receivers allow one 28-SSOP device to manage four outbound channels while monitoring a fifth inbound signal, reducing the number of separate interface packages on the board. Operation from one 5 V rail simplifies system partitioning, and the 200 kbps rate supports both standard baud-rate links and faster legacy transfers. The ±15 kV ESD protection is particularly valuable when the ports connect to removable cables or external equipment. For a maintenance design, retain the original pin assignments and verify the shutdown behavior against the Analog Devices ADM211E documentation.

🖥️

Point-of-Sale Terminal Interface

The ADM211EARS is appropriate for point-of-sale equipment that connects several peripherals through legacy RS-232 ports. Four driver outputs can support receipt printers, scanners, or other peripherals that transmit data toward the terminal, while five receiver inputs allow the controller to receive responses from multiple devices. The single 5 V supply allows the interface to operate alongside CMOS controller logic, while 200 kbps performance covers conventional serial transactions. The shutdown function can reduce power use during idle periods, provided firmware observes the manufacturer timing requirements. Because the exact ADM211EARS suffix is obsolete, new point-of-sale platforms should evaluate the currently documented equivalent rather than designing around an unsupported part number.

🧩

Data Acquisition and Test Equipment

The ADM211EARS suits legacy laboratory and test systems that must communicate with several RS-232 instruments. Four transmit channels can carry commands toward separate test platforms, and five receive channels can collect responses or status information. Its 200 kbps maximum rate is more than sufficient for instruments using common UART baud rates, while the 5 V-only architecture simplifies integration with embedded controller boards. Shutdown provides a means to disable the interface and its charge pump when measurements are complete. External connectors should include suitable protection and grounding practices in addition to the device’s ±15 kV ESD rating. Confirm channel polarity and enable timing in the manufacturer pin and timing tables before connecting powered test equipment.

🖥️

Legacy Computer Serial Backplane

The ADM211EARS can support service and control ports on legacy computer, server, and peripheral equipment that uses multiple RS-232 channels. Four drivers and five receivers provide a concentrated interface for configuration links, diagnostic ports, and auxiliary equipment connections. The 200 kbps capability covers short control traffic and conventional serial console traffic without requiring a separate 12 V rail. A single 5 V supply is useful in equipment where logic rails already exist and board space is constrained. The shutdown mode lets the controller disable all transmitters, receivers, and the charge pump during inactive periods. Maintain the original connector-side routing and avoid long unprotected traces near high-energy switching nodes to preserve the intended EMI/EMC behavior.

🌐

Instrument Communication Hub

The ADM211EARS is useful in a communication hub that centralizes RS-232 connections for remote sensors, laboratory instruments, or service equipment. The receiver surplus allows one additional incoming channel to be monitored without adding another package, while the 200 kbps rate supports many conventional instrument protocols. The interface’s single 5 V requirement simplifies powering in compact controller assemblies, and the shutdown control can isolate the interface during firmware updates or bus idle periods. The ±15 kV ESD protection adds defense at connector-adjacent circuits, although cable routing and grounding remain essential parts of a reliable implementation. Use the manufacturer’s recommended application circuit and charge-pump capacitor placement to minimize emissions and maintain stable line levels.

🔧

Maintenance of Legacy RS-232 Equipment

The ADM211EARS is most directly applicable to repair and component-replacement work on legacy RS-232 equipment that uses the exact 28-SSOP footprint. Its four-driver, five-receiver arrangement and 5 V supply simplify like-for-like board maintenance, particularly for equipment with multiple serial accessories. The documented shutdown function and 200 kbps rate match the established interface behavior expected by older control firmware. Because the suffix is obsolete, traceable stock may be limited, so procurement should identify the exact package and marking requirements. Any substitute must be checked against the manufacturer pin descriptions for driver outputs, receiver inputs, shutdown polarity, ground connections, and the charge-pump capacitor pin before installation.

What is the ADM211EARS?
The ADM211EARS is an obsolete Analog Devices 4-driver, 5-receiver RS-232 transceiver operating from a single 5 V supply. According to the manufacturer’s ADM211E product page, it is intended for EIA-232-E and CCITT V.28 interfaces, supports operation without a 12 V supply, and includes a shutdown function that disables the charge pump, transmitters, and receivers. The device is offered in a 28-lead SSOP package.
How many RS-232 drivers and receivers does ADM211EARS have?
The ADM211EARS has four RS-232 drivers and five receivers, as identified in the DigiKey product listing and the Analog Devices ADM211E datasheet. The receiver count exceeds the driver count by one, allowing a port to monitor one additional incoming signal. This arrangement is useful in multi-port RS-232 equipment where the system requires several independent transmit and receive connections from a single 28-lead interface package.
What is the maximum data rate of ADM211EARS?
The ADM211EARS supports data rates up to 200 kbps. Analog Devices describes the ADM211E family as a 5 V RS-232 transceiver for EIA-232-E and CCITT V.28 interfaces, while the ADM211 product overview identifies the related 200 kbps capability. The 200 kbps rating makes the device suitable for legacy serial links that operate faster than the common 9600-baud and 115200-baud UART configurations.
What supply voltage does ADM211EARS require?
The ADM211EARS operates from a single +5 V supply. Analog Devices states that the ADM2xxE family operates from one 5 V rail, avoiding the need for a separate ±12 V supply. The 5 V arrangement allows the interface to share a supply rail with CMOS logic, while an on-chip charge pump generates the bipolar line voltages required by RS-232. The manufacturer specifies a 0.1 µF charge-pump capacitor.
Is ADM211EARS still active?
No, the ADM211EARS is obsolete and is no longer manufactured by Analog Devices. The DigiKey listing for this exact suffix explicitly identifies the part as obsolete and directs buyers to a parametric equivalent. For maintenance of an existing PCB, the original suffix remains the correct reference for fit, function, and approved-component traceability; for a new design, use a currently supported equivalent after reviewing its pin and shutdown details.
Where can I download the ADM211EARS datasheet?
The ADM211EARS datasheet is available through the Analog Devices ADM211E product page at https://www.analog.com/en/products/adm211e.html. The manufacturer page provides the current family documentation, including electrical characteristics, pin descriptions, shutdown behavior, and application guidance. Use that document for the exact RS-232 output levels, receiver thresholds, timing limits, and pin assignments before laying out or repairing the interface.
Where can I find the ADM211EARS pinout?
The ADM211EARS pinout is documented in the pin-configuration and pin-description tables of the Analog Devices ADM211E datasheet. The part is a 28-lead SSOP with four driver outputs, five receiver inputs, supply and ground pins, shutdown control, and charge-pump connections. Assign PCB nets directly from the manufacturer pin table and preserve the connector-side versus logic-side grouping shown in the recommended layout.
What is the best drop-in replacement for ADM211EARS?
The ADM211ARSZ is identified as the parametric equivalent for the obsolete ADM211EARS by the DigiKey cross-reference listing. The related ADM211EARSZ is a second closely related option listed in the comparison record. Because package marking and suffix construction can change, verify that the selected candidate has the same 28-SSOP footprint, identical driver and receiver assignments, and compatible shutdown-control polarity before treating it as a board-for-board substitution.
Can ADM211ARSZ replace ADM211EARS on an existing PCB?
The ADM211ARSZ can serve as the closest documented replacement candidate because DigiKey identifies it as the parametric equivalent of the ADM211EARS. Both devices are associated with the ADM211 family and the 28-SSOP interface configuration. Before approving the substitution, compare the manufacturer pin tables for output and input assignments, shutdown polarity, charge-pump capacitor connection, and ESD-related implementation details.
When should I choose ADM211EARS over another RS-232 transceiver?
Choose the ADM211EARS when repairing or maintaining an existing 28-SSOP design that specifically requires four drivers, five receivers, a 5 V supply, and the documented shutdown behavior. Its 200 kbps capability is appropriate for legacy RS-232 links, and ±15 kV ESD protection is useful on externally accessible ports. For new products, prefer an actively supported equivalent because the exact suffix is obsolete and cannot be assumed to have ongoing manufacturing availability.
Is ADM211EARS suitable for industrial RS-232 equipment?
The ADM211EARS is suitable for industrial and commercial RS-232 equipment that uses a 5 V supply and requires multiple serial channels. Analog Devices describes the ADM2xxE family as intended for harsh electrical environments and identifies EMI/EMC compliance as a product feature. The device also offers ±15 kV ESD protection on the relevant line interfaces, which supports robust connectorized designs when grounding and cable practices are applied correctly.
How does the ADM211EARS shutdown function work?
The ADM211EARS shutdown function disables the charge pump together with all transmitters and receivers. According to the Analog Devices ADM211E product page, the shutdown state is intended to reduce power consumption when the serial interface is not active. Firmware should assert the shutdown control only after completing outstanding transmissions, and it should follow the manufacturer timing diagram when restoring operation.
Does ADM211EARS need a 12 V power supply?
No, the ADM211EARS operates from a single 5 V supply and does not require an external 12 V rail. Analog Devices positions the ADM211 family specifically for RS-232 interfaces in systems where 12 V is unavailable. The internal charge-pump function, supported by the specified 0.1 µF capacitor, produces the signal levels needed for RS-232 transmission while the device remains compatible with 5 V CMOS systems.
What can replace ADM211EARS in a multi-port design?
A multi-port design can replace the ADM211EARS with the ADM211ARSZ or ADM211EARSZ after confirming pin compatibility with the original 28-SSOP layout. The documented ADM211E family characteristics include four drivers, five receivers, a 5 V supply, and a shutdown function. Other interface families may support similar communication tasks, but they are not automatically drop-in replacements when the pin count, channel arrangement, or control logic differs.
What are the key specifications of ADM211EARS that engineers should know?
The key ADM211EARS specifications are four drivers, five receivers, one 5 V supply, operation up to 200 kbps, ±15 kV ESD protection, and a 28-lead SSOP package. The device targets EIA-232-E and CCITT V.28 links and provides a shutdown mode that disables the charge pump, transmitters, and receivers. These parameters determine supply design, port count, cable protection requirements, and replacement compatibility.
Where can I buy ADM211EARS and what is the price?
Use the Request a Quote form on this page to ask for ADM211EARS availability, unit pricing, lot size, and lead time. Because the exact suffix is obsolete, stock and pricing can vary substantially by remaining inventory and sourcing channel. Quote the full MPN ADM211EARS, the required package form, and your annual usage so the request can be matched against traceable inventory rather than a functionally similar interface IC.

Dados de referência de engenharia para ADM211EARS — comparação, orientação de projeto e informações de conformidade.

Guia de seleção

Choose the ADM211EARS when repairing an existing 28-SSOP board that requires four RS-232 drivers, five receivers, 5 V operation, and the established shutdown function. Its 200 kbps rate, EIA-232-E and V.28 support, and ±15 kV ESD rating match classic multi-port industrial, test, and service equipment. Choose ADM211ARSZ when procurement needs the closest documented parametric equivalent of the obsolete suffix, after confirming the pin descriptions and control polarity. Choose ADM211EARSZ when an ordering suffix carrying RoHS documentation is required for the same device family. Choose a single-channel part such as MAX3221IPWR when the design needs only one RS-232 port and a smaller package is more valuable than channel density. For new multi-port products, verify lifecycle status and complete the shutdown-timing review before committing the layout.

Comparação com alternativas

Parâmetro Este produto ADM211ARSZ ADM211EARSZ
Brand Analog Devices Analog Devices Analog Devices
Package 28-SSOP 28-SSOP 28-SSOP
Product Type 4/5 RS-232 transceiver RS-232 interface transceiver RS-232 interface transceiver
Driver Count 4 drivers 4 drivers 4 drivers
Receiver Count 5 receivers 5 receivers 5 receivers
Supply Voltage 5 V 5 V 5 V
Interface Standards EIA-232-E and CCITT V.28 EIA-232-E and CCITT V.28 EIA-232-E and CCITT V.28

Principais diferenciais

  • Four transmit channels in one multi-channel interface package (vs MAX3221IPWR)
  • Documented parametric relationship for obsolete-board replacement (vs ADM211ARSZ)
  • Higher channel count than a single-port RS-232 transceiver (vs TJA1057GTK/3Z)
  • Single-supply RS-232 operation with integrated control (vs MAX3221CDBR)

Notas de projeto

Place the specified 0.1 µF charge-pump capacitor close to the ADM211EARS charge-pump pin and follow the Analog Devices ADM211E recommended application layout. Keep the four driver outputs and five receiver inputs on the connector side of the board, and place the logic-side UART connections on the opposite side. This separation reduces capacitive coupling between cable-attached lines and low-level digital signals while preserving a short return path to ground.

Do not assume that every RS-232 transceiver with a similar channel count is pin-compatible. Verify driver-output positions, receiver-input positions, ground pins, shutdown polarity, and the charge-pump capacitor connection against the manufacturer pin descriptions. The ADM211ARSZ is the closest documented parametric equivalent for the ADM211EARS, but an approval still requires schematic-level comparison against the 28-SSOP footprint and the original board’s connector wiring.

The device provides ±15 kV ESD protection, but connector protection still depends on correct board layout and cable practices. Keep RS-232 traces short, route them away from switching nodes and high-current power paths, and use a continuous ground reference. Apply the manufacturer’s recommended charge-pump capacitor placement because an extended charge-pump loop can increase emissions and reduce margin in EMI-sensitive equipment.

The ADM211EARS uses a single 5 V supply, so route a local decoupling network to the device according to the recommended application circuit. Enable the shutdown control only after pending transmissions have completed, and restore it using the timing specified by Analog Devices. Shutdown disables the charge pump, transmitters, and receivers, making it useful for reducing consumption in equipment that spends substantial time with unused serial ports.

Informações de conformidade

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Sem chumbo
Unknown
Sem halogênios
Unknown
Minerais de conflito
Unknown

Analog Devices describes the ADM2xxE family as compliant with the EU EMC directive. The ADM211EARSZ comparison record refers to RoHS compliance, but no specific compliance statement for the ADM211EARS suffix was established, so the affected fields remain unknown. AEC-Q100 qualification does not apply to this non-automotive interface transceiver.

Dados verificados em: 2026-11-14 — dados verificados e curados pela equipe de engenharia de componentes da XAIPART

Buscas relacionadas

ADM211EARS datasheet ADM211EARS pinout ADM211EARS datasheet pdf ADM211EARS equivalent ADM211EARS replacement ADM211EARS cross reference ADM211EARS 28-SSOP Analog Devices ADM211EARS ADM211EARS RS-232 200 kbps ADM211EARS price ADM211EARS stock ADM211EARS vs ADM211ARSZ ADM211EARS industrial serial interface ADM211EARS obsolete replacement

Componentes & termos relacionados

Analog Devices ADM211EARS ADM211ARSZ ADM211EARSZ ADM211E RS-232 transceiver RS-232 EIA-232-E CCITT V.28 line driver line receiver UART interface CMOS logic 5 V power supply 200 kbps data rate 28-lead SSOP SSOP package family surface mount charge pump 0.1 µF capacitor shutdown control ±15 kV ESD protection EMI/EMC compliance industrial serial communication obsolete component
RFQ de cotação rápida
Preencha todos os detalhes — nossa equipe de vendas responderá em até 24 horas
Part number Fabricante Encapsulamento QTY Preço-alvo Total
✓
Cotação enviada!

Responderemos seu e-mail em até 24 horas

1
RFQ enviada
2
Cotação recebida
3
Pedido realizado
4
Pagamento
5
Enviado
6
Entregue
Ver detalhes da RFQ