Texas Instruments

ADS8675IPW - 14-Bit 500-kSPS SAR ADC | Texas Instruments

N.º da peça: ADS8675IPW ✓ Ativo
5 V Vdss 16-pin TSSOP, 4.40 mm width Package
MOQ: 1 |

ADS8675IPW Visão geral

The Texas Instruments ADS8675IPW is a 14-bit, 500-kSPS, single-channel successive-approximation analog-to-digital converter with an integrated analog front end, housed in a 16-pin TSSOP package. It supports bipolar input ranges of ±12.288 V, ±10.24 V, ±6.144 V, ±5.12 V, and ±2.56 V, plus unipolar ranges from 0 V to 12.288 V, 10.24 V, 6.144 V, and 5.12 V. The analog supply operates from 5 V, while the digital interface accepts 1.65 V to 5 V.

An ADC is a data-conversion IC that transforms an analog voltage into a digital number for measurement, control, monitoring, or communications. The ADS8675IPW belongs to the successive-approximation ADC hierarchy, also called a SAR ADC, within the broader analog-to-digital converter and data-converter semiconductor categories. Successive-approximation converters compare the sampled input with an internal reference through a sequence of bit decisions, combining deterministic conversion behavior with low converter power.

Key features include a 14-bit conversion resolution, a 500-kSPS sampling rate, software-programmable bipolar and unipolar ranges, and constant resistive input impedance of at least 1 MΩ. The integrated analog front end reduces the need for external conditioning, while the on-chip 4.096 V reference provides a stable conversion basis. Input overvoltage protection extends to ±20 V, adding robustness in industrial systems where transient voltage excursions can occur.

The device uses a 5 V analog supply and a separate 1.65 V to 5 V I/O supply, allowing its serial interface to operate at a lower logic level when necessary. Its constant input impedance simplifies front-end scaling and sample-and-hold design compared with converters whose input impedance changes with conversion timing. The supported high-voltage ranges make the converter practical for systems handling bipolar sensor signals, industrial process voltages, and level measurements without immediately requiring a separate high-voltage protection network.

Typical applications include industrial process-control instrumentation, factory automation, data-acquisition systems, power-grid monitoring, laboratory measurement equipment, and embedded control platforms. A 500-kSPS rate supports rapidly changing analog events, while 14-bit resolution provides 16,384 discrete code levels for a selected range. The ADC can also form the measurement front end of a programmable power supply or battery-management system where accurate voltage monitoring is required.

Designers should account for analog-supply noise, reference integrity, digital-interface timing, and grounding when deploying the ADS8675IPW. The serial output and digital I/O supply must be compatible with the host controller, while input filtering and scaling must keep the analog signal within the programmed range. Proper decoupling and a quiet analog layout are especially important when the converter is placed beside switching regulators, clocks, or high-current digital circuitry.

Alternativas drop-in para ADS8675IPW — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.

Nenhuma alternativa drop-in disponível para este produto.

Solicitar alternativas

ADS8675IPW Classificações máximas e características elétricas

Resolução 14 bit
Taxa de amostragem 500 kSPS
Architecture Successive-approximation SAR ADC
Number of Channels 1 channel
Input Type Single-ended, unipolar or bipolar
Bipolar Input Ranges ±12.288 V, ±10.24 V, ±6.144 V, ±5.12 V, and ±2.56 V
Unipolar Input Ranges 0 V to 12.288 V, 0 V to 10.24 V, 0 V to 6.144 V, and 0 V to 5.12 V
Analog Supply Voltage 5 V
I/O Supply Voltage Range 1.65 V to 5 V
Input Impedance At least 1 MΩ
Input Overvoltage Protection Up to ±20 V
Internal Reference Voltage 4.096 V
Integrated Analog Front End Yes
Encapsulamento 16-pin TSSOP, 4.40 mm width
Tipo de montagem Surface mount

Guia de Configuração de Pinos do ADS8675IPW 16-pin tssop, 4.40 mm width

Configuração de pinos para ADS8675IPW (pacote 16-pin tssop, 4.40 mm width). Este componente analógico possui pinos de entrada, saída e alimentação. Consulte o datasheet do fabricante para configurações de offset null, compensação e pino de enable. Ideal para circuitos de condicionamento de sinal e amplificadores.

Diagrama de pinagem do pacote 16-pin tssop, 4.40 mm width para ADS8675IPW

Nenhum dado detalhado de pinagem disponível para ADS8675IPW.

Consulte a ficha técnica para a configuração completa dos pinos.

Aplicações típicas

ADS8675IPW é adequado para 6 aplicaçãos: Industrial Process Measurement, Factory Automation Controllers, Power-Supply Monitoring, Data-Acquisition Systems, Laboratory Instrumentation, Embedded Control Platforms.

🏭

Industrial Process Measurement

The ADS8675IPW fits industrial process-measurement channels that require 14-bit resolution and 500-kSPS acquisition. Its programmable bipolar ranges of ±2.56 V, ±5.12 V, ±6.144 V, ±10.24 V, and ±12.288 V accommodate commonly scaled process signals without an external high-voltage ADC front end. The integrated analog front end and constant input impedance of at least 1 MΩ simplify the connection to sensor transmitters and current-shunt amplifiers. Designers should still include protection against sustained out-of-range inputs, use a quiet 5 V analog supply, and place input filtering close to the converter.

🏭

Factory Automation Controllers

The ADS8675IPW is suitable for factory automation controllers that monitor pressure, position, load, or actuator feedback through analog sensor interfaces. Its 500-kSPS throughput provides timely updates for supervisory control loops, while 14-bit resolution preserves detail in slowly varying process signals. Select the narrowest programmable range that accommodates the normal signal to maximize use of the 16,384 available code levels. The 1.65 V to 5 V I/O supply also allows the serial interface to be matched to the controller logic level, reducing level-shifting components.

⚡

Power-Supply Monitoring

The ADS8675IPW can monitor power-converter outputs, bus voltages, and battery strings where precise telemetry is required. Its unipolar ranges from 0 V to 5.12 V through 0 V to 12.288 V cover commonly scaled telemetry voltages, and the 500-kSPS rate supports fast fault detection and supervisory updates. The integrated 4.096 V reference supports repeatable measurements, although the accuracy of the complete measurement path still depends on the selected range, divider tolerances, source impedance, and reference specifications.

📊

Data-Acquisition Systems

The ADS8675IPW serves as the measurement engine in compact data-acquisition systems requiring accurate conversion without a high-power flash ADC. A 500-kSPS conversion rate supports acquisition of multiple sequential channels when multiplexing is added upstream, while the constant input impedance simplifies source-network design. The serial interface and selectable I/O supply provide flexibility in embedded measurement equipment. Layout should separate analog input routing from the digital clock and serial signals, and both supply domains require local high-frequency decoupling.

🧪

Laboratory Instrumentation

The ADS8675IPW is appropriate for laboratory instruments that measure bipolar sensor outputs, programmable sources, or analog test-node voltages. Its selectable ranges extend to ±12.288 V, and its 14-bit resolution provides useful measurement granularity for instrumentation operating from laboratory-level signals. The integrated analog front end reduces external circuitry, but accuracy still depends on analog-supply quality, reference stability, input filtering, and calibration. A dedicated analog ground plane and careful isolation of digital return currents help preserve conversion repeatability.

🔧

Embedded Control Platforms

The ADS8675IPW can serve embedded control platforms that need fast analog feedback for monitoring, diagnostics, or adaptive control. Its 500-kSPS rate supplies up to 500,000 samples per second, and the 1.65 V to 5 V I/O range permits direct interfacing with common low-voltage processors and controllers. The converter requires a separate 5 V analog rail even when its digital interface operates at a lower voltage. Firmware should configure the input range carefully and discard or qualify samples affected by input-network settling or transient protection events.

Resumo dos produtos recomendados

ADS8675IPW Texas Instruments Usado em: Industrial Process Measurement, Factory Automation Controllers, Power-Supply Monitoring, Data-Acquisition Systems, Laboratory Instrumentation, Embedded Control Platforms ADS8519IDR Related precision data-conversion device Usado em: Industrial Process Measurement, Factory Automation Controllers, Power-Supply Monitoring, Data-Acquisition Systems, Laboratory Instrumentation, Embedded Control Platforms
What are the key specifications of ADS8675IPW that engineers should know?
The ADS8675IPW is a 14-bit, 500-kSPS, single-channel SAR ADC with an integrated analog front end and a 16-pin TSSOP package. According to the Texas Instruments ADS8675 data sheet, it accepts bipolar ranges of ±12.288 V, ±10.24 V, ±6.144 V, ±5.12 V, and ±2.56 V, along with four unipolar ranges. It uses a 5 V analog supply, supports a 1.65 V to 5 V I/O supply, provides input impedance of at least 1 MΩ, and includes input overvoltage protection up to ±20 V.
What is the conversion speed and resolution of the ADS8675IPW?
The ADS8675IPW performs conversions at 500 kSPS with 14-bit resolution. According to the Texas Instruments ADS8675 product documentation, each conversion can represent 16,384 discrete levels. The 500-kSPS rate makes the device appropriate for industrial monitoring, process control, and other applications that require rapid acquisition without moving to a much higher-power or more complex flash-converter architecture.
What input voltage ranges does ADS8675IPW support?
The ADS8675IPW supports software-programmable bipolar ranges of ±12.288 V, ±10.24 V, ±6.144 V, ±5.12 V, and ±2.56 V. It also supports unipolar ranges of 0 V to 12.288 V, 0 V to 10.24 V, 0 V to 6.144 V, and 0 V to 5.12 V. According to the Texas Instruments ADS8675 data sheet, the on-chip 4.096 V reference is used with the integrated analog front end to implement these selectable measurement ranges.
Why is the constant input impedance of ADS8675IPW important?
The ADS8675IPW provides constant resistive input impedance of at least 1 MΩ, which simplifies the design of the divider, amplifier, and filtering network connected to the analog input. A constant impedance is easier to characterize than one that changes with sampling phase, allowing the source impedance and settling time to be evaluated more reliably. The Texas Instruments ADS8675 product page identifies this characteristic as a core feature of the integrated analog front end.
Can ADS8675IPW measure bipolar industrial signals?
Yes, the ADS8675IPW can measure bipolar industrial signals without requiring a separate ±2.56 V to ±12.288 V input stage. The Texas Instruments product documentation lists five programmable bipolar ranges and input overvoltage protection up to ±20 V. This makes the converter suitable for current-shunt amplifiers, bipolar sensor transmitters, and process-control signals, although the selected range must remain compatible with the source voltage and fault conditions.
What supply voltages are required for ADS8675IPW?
The ADS8675IPW requires a 5 V analog supply and accepts a 1.65 V to 5 V I/O supply. According to the Texas Instruments ADS8675 data sheet, separating the analog and digital supply domains lets the serial interface operate with the host controller’s logic level. Both supply rails must remain within their specified operating limits, and each should be decoupled close to the device to limit supply disturbance during conversion.
Where can I download the ADS8675IPW datasheet PDF?
The official ADS8675 data sheet is available through the Texas Instruments product page at https://www.ti.com/product/ADS8675. The package-specific page for ADS8675IPW is https://www.ti.com/product/ADS8675/part-details/ADS8675IPW. These official pages provide the Rev. B data sheet and support material. Engineers should use the data sheet’s pin-description table and recommended application circuit when assigning PCB nets and checking interface timing.
Where can I find the ADS8675IPW pinout?
The ADS8675IPW pinout is published in the Texas Instruments ADS8675 family data sheet, whose family description covers ADS8671 and ADS8675 devices. The package is a 16-pin TSSOP. Use the pin-description table in the official data sheet to identify the analog input, analog and digital supplies, serial interface signals, reference connections, and ground pins before laying out the PCB.
Is ADS8675IPW suitable for industrial process-control systems?
The ADS8675IPW is suitable for industrial process-control systems that need up to 500-kSPS acquisition and 14-bit measurement resolution. Its selectable ranges cover common bipolar process signals, including ±2.56 V, ±5.12 V, ±6.144 V, ±10.24 V, and ±12.288 V. The integrated analog front end, constant input impedance, and ±20 V overvoltage protection reduce the amount of external conditioning required for robust measurement channels.
What is the difference between ADS8675IPW and ADS8671?
The principal documented difference is conversion speed: the ADS8675 provides 500 kSPS, while ADS8671 provides 1 MSPS. Both devices belong to the Texas Instruments ADS867x family of single-supply SAR data-acquisition systems with integrated analog front ends. The Texas Instruments product documentation describes this family relationship, but a board-level substitution should still be confirmed against the complete pin descriptions, electrical limits, and acquisition timing requirements.
When should I choose ADS8675IPW over a faster ADC?
Choose the ADS8675IPW when 500-kSPS acquisition and 14-bit resolution satisfy the measurement requirement but a faster converter would add unnecessary power, cost, or design complexity. Its integrated analog front end, programmable ranges, and 1.65 V to 5 V interface supply simplify acquisition channels. A faster ADC is preferable when the signal must be sampled at higher rates, such as waveform capture or high-speed closed-loop control, rather than process monitoring.
What can replace ADS8675IPW on an existing PCB?
A valid drop-in replacement must match the 16-pin TSSOP footprint, pin assignments, electrical limits, interface protocol, and programmed input ranges. No cross-brand drop-in equivalent is established by the available cross-reference results, so an alternative should not be selected from a generic parametric list alone. ADS8671 is a closely related Texas Instruments family member with a faster 1 MSPS rate, but its data sheet and pin table must be checked before treating it as a drop-in replacement.
Is ADS8675IPW the same as ADS8675IPWR?
ADS8675IPW and ADS8675IPWR refer to the same ADS8675 device in different orderable packaging configurations, commonly distinguishing tube packing from tape-and-reel packing. Packing code differences do not change the converter’s electrical function or pinout. When replacing the part, confirm the manufacturer’s orderable nomenclature and the packaging format required by the assembly process rather than treating the packing suffix as a functional variant.
What is the best cross-brand equivalent for ADS8675IPW?
No specific cross-brand equivalent can be recommended as a verified drop-in replacement for the ADS8675IPW from the available manufacturer and cross-reference information. A valid substitute must preserve the 16-pin TSSOP footprint, 14-bit SAR conversion behavior, 500-kSPS-class performance, input-range architecture, serial interface, and supply requirements. Use the Texas Instruments cross-reference search and the candidate manufacturer’s data sheet to verify every pin and electrical parameter before approving a cross-brand substitution.
Where to buy ADS8675IPW online?
Use the Request a Quote form on this page to request ADS8675IPW availability, current unit pricing, quantity breaks, and lead time. The Texas Instruments product page also provides official ordering information for the exact device. For production purchasing, request the factory packing configuration required by your PCB assembly process and have the manufacturer confirm authorized channel availability and lifecycle status.
What is the price of ADS8675IPW?
The current ADS8675IPW price depends on order quantity, packaging configuration, and market availability. Use the Request a Quote form on this page for current pricing and quantity breaks rather than relying on an archived catalog figure. The same form is the appropriate channel for confirming minimum order quantity, production lead time, and availability for the exact 16-pin TSSOP orderable part.
Is ADS8675IPW in stock and what is its lead time?
Current ADS8675IPW stock and lead time should be requested through the Request a Quote form on this page. Lead time can vary with order quantity, selected factory packing method, and current component availability. The Texas Instruments product page identifies ADS8675IPW as an orderable device, but it does not by itself establish the stock quantity available for a particular shipment.

Dados de referência de engenharia para ADS8675IPW — comparação, orientação de projeto e informações de conformidade.

Guia de seleção

Choose the ADS8675IPW when a compact 14-bit measurement channel must accept bipolar or unipolar signals up to ±12.288 V or 12.288 V, operate from a 5 V analog supply, and provide a 500-kSPS conversion rate. It is particularly useful when the input range must be software-programmable and the host interface uses a 1.65 V to 5 V logic supply. The integrated analog front end simplifies designs compared with an ADC requiring a separate input driver and reference. ADS8671 may be considered when twice the sampling rate is needed, but the data sheet, timing, and pin assignments must be checked before board substitution. No cross-brand part is recommended without a complete pin-, protocol-, and electrical-parameter review. For production selection, confirm the 16-pin TSSOP footprint, lifecycle status, factory packing option, analog input range, digital interface voltage, and acquisition timing against the system requirements.

Comparação com alternativas

Parâmetro Este produto
Package 16-pin TSSOP, 4.40 mm width
Brand Texas Instruments
Resolution 14 bit
Sampling Rate 500 kSPS
Architecture Single-channel SAR ADC with integrated analog front end
Bipolar Input Ranges ±12.288 V, ±10.24 V, ±6.144 V, ±5.12 V, and ±2.56 V
Unipolar Input Ranges 0 V to 12.288 V, 10.24 V, 6.144 V, and 5.12 V
Analog Supply 5 V
I/O Supply Range 1.65 V to 5 V
Input Overvoltage Protection Up to ±20 V
Internal Reference 4.096 V
Input Impedance At least 1 MΩ

Principais diferenciais

  • High-voltage programmable input ranges (vs ADS8671)
  • Integrated analog front end (vs Generic external-front-end ADC)
  • Flexible digital interface supply (vs Fixed 5 V interface ADC)

Notas de projeto

Route the analog input directly to the converter and place any series resistance, RC filtering, and protection components close to the package. Keep digital clock and serial-interface traces away from the input and reference nodes. The analog and digital grounds should meet at a controlled return point, and a continuous ground plane under the TSSOP helps reduce coupling between the integrated analog front end and the switching I/O circuitry.

Provide a quiet 5 V analog supply and a separate 1.65 V to 5 V I/O supply as required by the interface voltage. Place the recommended input, output, and reference-bypass capacitors at their associated supply pins with short ground returns. Avoid deriving the analog rail from the digital switching current path unless the regulator demonstrates adequate noise performance and stability under the expected load.

Configure the narrowest input range that safely contains the expected signal; otherwise, useful resolution is reduced. Do not treat the ±20 V overvoltage protection rating as a continuous operating range, and verify the duration and energy of external fault conditions. Also verify the selected factory packing configuration, because ADS8675IPW and ADS8675IPWR differ in orderable packaging rather than converter functionality.

Informações de conformidade

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Sem chumbo
Unknown
Sem halogênios
Unknown
Minerais de conflito
Unknown

Compliance attributes were not stated in the manufacturer product page excerpts or cross-reference information. The device is not an AEC-Q100-qualified automotive variant based on the documented orderable nomenclature, but its formal qualification status should be confirmed with the manufacturer before automotive use.

Dados verificados em: 2026-11-18 — dados verificados e curados pela equipe de engenharia de componentes da XAIPART

Buscas relacionadas

ADS8675IPW datasheet ADS8675IPW pinout ADS8675IPW datasheet pdf ADS8675IPW equivalent ADS8675IPW replacement ADS8675IPW price ADS8675IPW stock Texas Instruments ADS8675IPW ADS8675 14-bit 500 kSPS ADC ADS8675IPW TSSOP pinout ADS8675IPW industrial process measurement ADS8675IPW vs ADS8671

Componentes & termos relacionados

Texas Instruments ADS8675 ADS8675IPW ADS8671 analog-to-digital converter ADC successive-approximation ADC SAR ADC data-acquisition system analog front end integrated analog front end on-chip reference 4.096 V reference 14-bit resolution 500 kSPS software-programmable input range bipolar input range unipolar input range constant input impedance input overvoltage protection TSSOP-16 QFN family surface mount SMD industrial process control
RFQ de cotação rápida
Preencha todos os detalhes — nossa equipe de vendas responderá em até 24 horas
Part number Fabricante Encapsulamento QTY Preço-alvo Total
✓
Cotação enviada!

Responderemos seu e-mail em até 24 horas

1
RFQ enviada
2
Cotação recebida
3
Pedido realizado
4
Pagamento
5
Enviado
6
Entregue
Ver detalhes da RFQ