ADS8675IPW - 14-Bit 500-kSPS SAR ADC | Texas Instruments
MPN: ADS8675IPW ✓ 啟用中ADS8675IPW 概覽
An ADC is a data-conversion IC that transforms an analog voltage into a digital number for measurement, control, monitoring, or communications. The ADS8675IPW belongs to the successive-approximation ADC hierarchy, also called a SAR ADC, within the broader analog-to-digital converter and data-converter semiconductor categories. Successive-approximation converters compare the sampled input with an internal reference through a sequence of bit decisions, combining deterministic conversion behavior with low converter power.
Key features include a 14-bit conversion resolution, a 500-kSPS sampling rate, software-programmable bipolar and unipolar ranges, and constant resistive input impedance of at least 1 MΩ. The integrated analog front end reduces the need for external conditioning, while the on-chip 4.096 V reference provides a stable conversion basis. Input overvoltage protection extends to ±20 V, adding robustness in industrial systems where transient voltage excursions can occur.
The device uses a 5 V analog supply and a separate 1.65 V to 5 V I/O supply, allowing its serial interface to operate at a lower logic level when necessary. Its constant input impedance simplifies front-end scaling and sample-and-hold design compared with converters whose input impedance changes with conversion timing. The supported high-voltage ranges make the converter practical for systems handling bipolar sensor signals, industrial process voltages, and level measurements without immediately requiring a separate high-voltage protection network.
Typical applications include industrial process-control instrumentation, factory automation, data-acquisition systems, power-grid monitoring, laboratory measurement equipment, and embedded control platforms. A 500-kSPS rate supports rapidly changing analog events, while 14-bit resolution provides 16,384 discrete code levels for a selected range. The ADC can also form the measurement front end of a programmable power supply or battery-management system where accurate voltage monitoring is required.
Designers should account for analog-supply noise, reference integrity, digital-interface timing, and grounding when deploying the ADS8675IPW. The serial output and digital I/O supply must be compatible with the host controller, while input filtering and scaling must keep the analog signal within the programmed range. Proper decoupling and a quiet analog layout are especially important when the converter is placed beside switching regulators, clocks, or high-current digital circuitry.
直接替換替代品,適用於 ADS8675IPW — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此產品無可直接替換的替代品。
申請替代品ADS8675IPW 最大額定值與電氣特性
| 解析度 | 14 bit |
| 取樣率 | 500 kSPS |
| Architecture | Successive-approximation SAR ADC |
| Number of Channels | 1 channel |
| Input Type | Single-ended, unipolar or bipolar |
| Bipolar Input Ranges | ±12.288 V, ±10.24 V, ±6.144 V, ±5.12 V, and ±2.56 V |
| Unipolar Input Ranges | 0 V to 12.288 V, 0 V to 10.24 V, 0 V to 6.144 V, and 0 V to 5.12 V |
| Analog Supply Voltage | 5 V |
| I/O Supply Voltage Range | 1.65 V to 5 V |
| Input Impedance | At least 1 MΩ |
| Input Overvoltage Protection | Up to ±20 V |
| Internal Reference Voltage | 4.096 V |
| Integrated Analog Front End | Yes |
| 封裝 | 16-pin TSSOP, 4.40 mm width |
| 安裝類型 | Surface mount |
ADS8675IPW 16-pin tssop, 4.40 mm width 腳位配置指南
ADS8675IPW(16-pin tssop, 4.40 mm width 封裝)的腳位配置。 此類比元件具有輸入、輸出與電源腳位。偏移歸零、補償與致能腳位配置請參閱製造商資料表。適用於訊號調理與放大器電路。
無詳細腳位定義資料: ADS8675IPW.
請參閱 資料表 以查看完整腳位配置。
典型應用
ADS8675IPW 適用於 6 應用s: Industrial Process Measurement, Factory Automation Controllers, Power-Supply Monitoring, Data-Acquisition Systems, Laboratory Instrumentation, Embedded Control Platforms.
Industrial Process Measurement
The ADS8675IPW fits industrial process-measurement channels that require 14-bit resolution and 500-kSPS acquisition. Its programmable bipolar ranges of ±2.56 V, ±5.12 V, ±6.144 V, ±10.24 V, and ±12.288 V accommodate commonly scaled process signals without an external high-voltage ADC front end. The integrated analog front end and constant input impedance of at least 1 MΩ simplify the connection to sensor transmitters and current-shunt amplifiers. Designers should still include protection against sustained out-of-range inputs, use a quiet 5 V analog supply, and place input filtering close to the converter.
推薦
Factory Automation Controllers
The ADS8675IPW is suitable for factory automation controllers that monitor pressure, position, load, or actuator feedback through analog sensor interfaces. Its 500-kSPS throughput provides timely updates for supervisory control loops, while 14-bit resolution preserves detail in slowly varying process signals. Select the narrowest programmable range that accommodates the normal signal to maximize use of the 16,384 available code levels. The 1.65 V to 5 V I/O supply also allows the serial interface to be matched to the controller logic level, reducing level-shifting components.
推薦
Power-Supply Monitoring
The ADS8675IPW can monitor power-converter outputs, bus voltages, and battery strings where precise telemetry is required. Its unipolar ranges from 0 V to 5.12 V through 0 V to 12.288 V cover commonly scaled telemetry voltages, and the 500-kSPS rate supports fast fault detection and supervisory updates. The integrated 4.096 V reference supports repeatable measurements, although the accuracy of the complete measurement path still depends on the selected range, divider tolerances, source impedance, and reference specifications.
推薦
Data-Acquisition Systems
The ADS8675IPW serves as the measurement engine in compact data-acquisition systems requiring accurate conversion without a high-power flash ADC. A 500-kSPS conversion rate supports acquisition of multiple sequential channels when multiplexing is added upstream, while the constant input impedance simplifies source-network design. The serial interface and selectable I/O supply provide flexibility in embedded measurement equipment. Layout should separate analog input routing from the digital clock and serial signals, and both supply domains require local high-frequency decoupling.
推薦
Laboratory Instrumentation
The ADS8675IPW is appropriate for laboratory instruments that measure bipolar sensor outputs, programmable sources, or analog test-node voltages. Its selectable ranges extend to ±12.288 V, and its 14-bit resolution provides useful measurement granularity for instrumentation operating from laboratory-level signals. The integrated analog front end reduces external circuitry, but accuracy still depends on analog-supply quality, reference stability, input filtering, and calibration. A dedicated analog ground plane and careful isolation of digital return currents help preserve conversion repeatability.
推薦
Embedded Control Platforms
The ADS8675IPW can serve embedded control platforms that need fast analog feedback for monitoring, diagnostics, or adaptive control. Its 500-kSPS rate supplies up to 500,000 samples per second, and the 1.65 V to 5 V I/O range permits direct interfacing with common low-voltage processors and controllers. The converter requires a separate 5 V analog rail even when its digital interface operates at a lower voltage. Firmware should configure the input range carefully and discard or qualify samples affected by input-network settling or transient protection events.
推薦
推薦產品摘要
工程參考資料,適用於 ADS8675IPW — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 |
|---|---|
| Package | 16-pin TSSOP, 4.40 mm width |
| Brand | Texas Instruments |
| Resolution | 14 bit |
| Sampling Rate | 500 kSPS |
| Architecture | Single-channel SAR ADC with integrated analog front end |
| Bipolar Input Ranges | ±12.288 V, ±10.24 V, ±6.144 V, ±5.12 V, and ±2.56 V |
| Unipolar Input Ranges | 0 V to 12.288 V, 10.24 V, 6.144 V, and 5.12 V |
| Analog Supply | 5 V |
| I/O Supply Range | 1.65 V to 5 V |
| Input Overvoltage Protection | Up to ±20 V |
| Internal Reference | 4.096 V |
| Input Impedance | At least 1 MΩ |
主要差異化特點
- High-voltage programmable input ranges (對比ADS8671)
- Integrated analog front end (對比Generic external-front-end ADC)
- Flexible digital interface supply (對比Fixed 5 V interface ADC)
設計說明
Route the analog input directly to the converter and place any series resistance, RC filtering, and protection components close to the package. Keep digital clock and serial-interface traces away from the input and reference nodes. The analog and digital grounds should meet at a controlled return point, and a continuous ground plane under the TSSOP helps reduce coupling between the integrated analog front end and the switching I/O circuitry.
Provide a quiet 5 V analog supply and a separate 1.65 V to 5 V I/O supply as required by the interface voltage. Place the recommended input, output, and reference-bypass capacitors at their associated supply pins with short ground returns. Avoid deriving the analog rail from the digital switching current path unless the regulator demonstrates adequate noise performance and stability under the expected load.
Configure the narrowest input range that safely contains the expected signal; otherwise, useful resolution is reduced. Do not treat the ±20 V overvoltage protection rating as a continuous operating range, and verify the duration and energy of external fault conditions. Also verify the selected factory packing configuration, because ADS8675IPW and ADS8675IPWR differ in orderable packaging rather than converter functionality.
合規資訊
Compliance attributes were not stated in the manufacturer product page excerpts or cross-reference information. The device is not an AEC-Q100-qualified automotive variant based on the documented orderable nomenclature, but its formal qualification status should be confirmed with the manufacturer before automotive use.