AFS600-1FG256K - 600K Fusion Mixed-Signal FPGA | Microchip
N.º da peça: AFS600-1FG256K ✓ AtivoAFS600-1FG256K Visão geral
An FPGA is a reconfigurable semiconductor containing programmable logic blocks and configurable interconnect resources. Unlike a fixed-function application-specific integrated circuit, an FPGA allows design logic, interfaces, control sequences, and peripheral functions to be implemented in hardware and revised through programmable configuration. The AFS600 family extends this concept into a mixed-signal architecture by adding configurable analog blocks and substantial embedded flash memory alongside high-performance flash-based logic.
The AFS600-1FG256K provides 600,000 equivalent system gates, 13,824 logic cells, 119 I/O, and a 256-terminal plastic BGA package. The Arrow listing specifies a 1.5 V device and a 1282.05 MHz maximum frequency, while the Microchip family page identifies the AFS600 family as a monolithic mixed-signal FPGA with configurable analog, large flash blocks, clock generation, and flash-based programmable logic. These resources support control-intensive embedded applications requiring both programmable logic and analog signal handling.
The 256-ball LBGA package is a surface-mount package suitable for compact, high-pin-count PCB designs. Its ball-grid layout supports dense routing to external memory, sensors, data converters, communication interfaces, and mixed-signal peripherals. Because the package exposes many balls and the device includes both digital and analog functions, PCB layout should provide careful power distribution, decoupling, grounding, and analog-signal routing in accordance with the manufacturer hardware guidelines.
Typical uses include industrial control, instrumentation, embedded data acquisition, communications equipment, and compact embedded systems where configurable logic and mixed-signal processing are required. The on-chip flash memory can support configuration and embedded data storage workflows when used with the appropriate Microchip programming and development environment. Designers should confirm the exact resource mapping, supported I/O standards, configuration method, power requirements, and package-specific constraints against the Microchip AFS600 documentation before schematic capture.
This product summary combines the verified manufacturer family information with distributor package, logic-resource, I/O, voltage, frequency, and ordering data. It also identifies same-footprint AFS600-family alternatives for engineering review while distinguishing confirmed facts from parameters that require the full datasheet or device-specific design package.
Alternativas drop-in para AFS600-1FG256K — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Variantes desta série
Modelos da mesma série compatíveis como drop-in com AFS600-1FG256K (mesmo formato e footprint) — diferindo em Device Type, Process Technology, System Gates, Configuration Memory, Maximum Frequency.
M7AFS600-FGG256
✅ Drop-InConsulte o preço
Ver ficha técnica →AFS600-FG256
✅ Drop-InConsulte o preço
Ver ficha técnica →AFS600-FGG256K
✅ Drop-InConsulte o preço
Ver ficha técnica →M1AFS600-1FGG256K
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
M1AFS600-1FG256K
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
AFS600-1FG256K Classificações máximas e características elétricas
| Device Type | Fusion mixed-signal field-programmable gate array (FPGA) |
| Programmable Logic | Flash-based programmable logic |
| Equivalent System Gates | 600,000 gates |
| Logic Cells | 13,824 logic cells |
| User I/O | 119 I/O |
| Maximum Frequency | 1282.05 MHz |
| Core Supply Voltage | 1.5 V |
| Integrated Analog | Configurable analog resources |
| Embedded Memory | Large flash memory blocks |
| Clock Management | Comprehensive clock generation and management circuitry |
| Encapsulamento | 256-terminal plastic ball grid array (256-LBGA) |
| Terminal Count | 256 terminals |
| Package Shape | Square |
| Terminal Pitch | 1.00 mm |
| Package Dimensions | 17 mm x 17 mm |
| Tipo de montagem | Surface mount |
| Ordering Package Option | Tray |
Guia de Configuração de Pinos do AFS600-1FG256K tray
Configuração de pinos para AFS600-1FG256K (pacote tray). Este CI digital inclui GPIO, interfaces de comunicação (UART, SPI, I2C) e pinos de alimentação. Consulte o datasheet do fabricante para funções alternativas dos pinos e opções de configuração. Essencial para projeto de sistemas embarcados e layout de PCB.
Nenhum dado detalhado de pinagem disponível para AFS600-1FG256K.
Consulte a ficha técnica para a configuração completa dos pinos.
Aplicações típicas
AFS600-1FG256K é adequado para 6 aplicaçãos: Industrial Data-Acquisition Systems, Programmable Instrumentation, Embedded Communications Equipment, Embedded Motor and Control Systems, Medical Monitoring Electronics, Secure Embedded Gateways.
Industrial Data-Acquisition Systems
The AFS600-1FG256K fits compact data-acquisition systems that combine sensor conditioning, digital filtering, control sequencing, and data formatting in one programmable device. Its 13,824 logic cells and 600,000 equivalent system gates provide substantial configurable logic capacity, while the 119 available I/O can connect multiplexers, converters, communications transceivers, and status indicators. The family's configurable analog resources and comprehensive clock-management circuitry are particularly relevant when acquisition timing must be coordinated with digital filtering. A practical design would implement the control plane in flash-based logic, capture or interface data through appropriate peripherals, and buffer results for transfer over a serial or parallel communications link. Before finalizing the schematic, engineers should verify the exact analog block count, converter interfaces, clock inputs, and acquisition timing using the full Microchip AFS600 documentation.
Recomendado
Programmable Instrumentation
The AFS600-1FG256K is suitable for programmable test and measurement instruments where measurement control, timing, calibration tables, and user interfaces must be adapted without changing fixed silicon. Its 600,000 equivalent gates and 13,824 logic cells allow multiple control channels, digital filtering, and interface state machines to operate concurrently, while the 119-I/O capacity supports displays, front-panel controls, trigger signals, and external instruments. Flash-based configuration is useful for preserving a known instrument configuration across power cycles, and the mixed-signal resources allow the architecture to include analog measurement functions alongside digital processing. Designers should partition deterministic timing and communication logic carefully, then validate clock-domain relationships and I/O standards against the device constraints. Exact analog accuracy and whether the chosen suffix supports the required operating temperature are not established by the supplied snippets and must be confirmed before release.
Recomendado
Embedded Communications Equipment
The AFS600-1FG256K can support communication equipment that needs adaptable packet processing, protocol conversion, supervisory logic, and mixed-signal interfaces in a single FPGA. Its 119 I/O provide connections for high-speed serial transceivers, clocks, control signals, and status outputs, while 13,824 logic cells are available for framing, buffering, filtering, and state-machine implementation. The 256-LBGA package offers a dense surface-mount footprint for equipment constrained by board area, and the family's clock-generation and management resources can help organize related digital domains. For a production design, the engineer should verify supported transceiver standards, I/O voltage standards, maximum fabric performance, and the available configuration interface before selecting board-level companion devices. The verified distributor listing reports a 1282.05 MHz maximum frequency and 1.5 V core voltage, but speed qualification for a specific I/O or system clock must still be checked in the official timing documentation.
Recomendado
Embedded Motor and Control Systems
The AFS600-1FG256K is applicable to embedded control systems where deterministic sequencing, sensor inputs, actuator outputs, protection logic, and communications must be coordinated in programmable hardware. The 13,824 logic cells and 119 I/O can support control state machines, encoder or sensor interfaces, fault logic, and supervisory communications, while the 1.5 V core operating point supports integration with modern mixed-signal systems. The configurable analog resources may reduce the number of separate devices when the application includes controlled analog functions. A hardware implementation should include deterministic reset behavior, clocking with defined jitter margins, fault-safe output defaults, and separation between external interface circuitry and sensitive control paths. Because the supplied data does not specify supported I/O standards, internal analog performance, or the exact temperature grade, those details must be validated against the AFS600 datasheet and package files before the FPGA is approved for motor-control use.
Recomendado
Medical Monitoring Electronics
The AFS600-1FG256K can support configurable monitoring and diagnostic equipment where sensor acquisition, digital filtering, control, and communications must share a compact hardware platform. Its 600,000 equivalent system gates and 119 I/O provide capacity for parallel sensor interfaces, digital signal processing stages, alarm logic, and a communications processor. The integrated configurable analog section and comprehensive clock-management circuitry may help simplify mixed-signal implementations, while embedded flash supports configuration persistence for repeatable device startup. However, medical use requires application-specific electrical-safety, EMC, reliability, and risk-management processes that cannot be inferred from a general FPGA listing. Engineers should verify input ranges, analog accuracy, isolation strategy, temperature grade, and supported configuration methods in the official documentation. Any connected communications or storage components should also be selected through the equipment's validated design process.
Recomendado
Secure Embedded Gateways
The AFS600-1FG256K fits embedded gateway designs requiring protocol adaptation, local control, memory buffering, and mixed-signal I/O in a programmable device. Its 13,824 logic cells can support multiple protocol engines and supervisory state machines, while the 119-I/O budget can connect Ethernet PHYs, serial transceivers, storage interfaces, and external monitoring devices. Large embedded flash resources are relevant when local configuration, firmware images, or protocol tables must be retained, although exact memory capacity and organization are not supplied in the verified data and therefore must not be assumed. The 256-LBGA package supports dense integration, but ball-escape routing, thermal performance, and power delivery require careful PCB planning. A production design should also protect programming and configuration access according to the product's security capabilities. The selected suffix, operating temperature, lifecycle commitments, and supply availability should be confirmed with Microchip before a long-life gateway is released.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para AFS600-1FG256K — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | AFS600-FGG256 | AFS600-FG256 | AFS600-FGG256K | M1AFS600-1FGG256K | M1AFS600-1FG256K |
|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 256-LBGA | 256-FBGA - same package format | 256-FBGA - same package format | 256-LBGA - same package format | 256-LBGA - same package format | 256-LBGA - same package format |
| Equivalent System Gates | 600,000 gates | 600,000 gates | 600,000 gates | 600,000 gates | 600,000 gates | 600,000 gates |
| Logic Cells | 13,824 logic cells | 13,824 logic cells | 13,824 logic cells | 13,824 logic cells | 13,824 logic cells | 13,824 logic cells |
| User I/O | 119 I/O | 119 I/O | 119 I/O | 119 I/O | 119 I/O | 119 I/O |
| Integrated Features | Configurable analog, large flash memory blocks, clock generation and management, flash-based programmable logic | AFS600 mixed-signal FPGA family | AFS600 mixed-signal FPGA family | AFS600 mixed-signal FPGA family | AFS600 mixed-signal FPGA family | AFS600 mixed-signal FPGA family |
Principais diferenciais
- Confirmed exact AFS600 configuration (vs M1AFS600-1FG256K)
- Dense mixed-signal integration (vs AFS600-FG256)
- Embedded analog, flash, and clock resources (vs AFS600-FGG256)
- Established 256-LBGA sourcing channel (vs AFS600-FGG256K)
Notas de projeto
Design the supply network around the confirmed 1.5 V core requirement, but do not derive auxiliary I/O or analog rail values from that number. Obtain the complete AFS600 power table and separate recommended rails for core, analog, and user I/O. Place the required bulk and high-frequency decoupling capacitors at their specified package pins; estimate required copper and plane area from the actual simultaneous switching and I/O-load condition rather than assuming that a single rail can support every bank.
The AFS600-1FG256K uses a dense 256-ball LBGA on a 17 mm by 17 mm, 1.00 mm-pitch footprint. Follow the manufacturer escape-routing, via, solder-mask, and land-pattern recommendations exactly. Expect short escape paths but difficult inspection and repair, so use a controlled assembly process, verify the pin-1 orientation and ball map, and include accessible test points for configuration, clock, reset, and selected I/O signals.
Treat clocks, high-speed user I/O, and sensitive analog inputs as separate routing classes. Route clocks with short continuous paths, provide return paths without plane splits, and keep switching outputs away from sensitive analog nets. Because the supplied excerpts do not state the supported I/O standards or input thresholds, select termination, protection, and voltage levels only after reviewing the device's package and interface specifications.
Do not treat a same-package AFS600 ordering code as automatically interchangeable. The cross-reference snippets identify several 256-FBGA family candidates, but suffix codes may alter speed, temperature, or commercial status. Before replacing AFS600-1FG256K, compare the complete ordering guide, pinout, silicon revision, configuration method, security or fuse state, operating-temperature grade, and lifecycle commitments.
Informações de conformidade
The verified distributor and manufacturer excerpts do not state RoHS, REACH, lead-free, halogen-free, or conflict-minerals status. AEC-Q100 is treated as not applicable because this is an FPGA rather than an automotive-qualified device, and no automotive qualification was provided.
