Texas Instruments

CD4045BPW - 21-Stage CMOS Counter | Texas Instruments

N.º da peça: CD4045BPW ✓ Ativo
5 V, 10 V, and 15 V Vdss 20 V Id 16-pin TSSOP Package
MOQ: 1 |

CD4045BPW Visão geral

Texas Instruments CD4045BPW is a CMOS timing circuit containing 21 counter stages, two output-shaping flip-flops, two inverter output drivers, and input inverters for crystal-oscillator use. It operates from the 5 V, 10 V, and 15 V parametric families, with testing performed at 20 V, and is packaged in a 16-pin TSSOP measuring approximately 0.173 inch wide by 4.40 mm. The circuit combines a long division chain with waveform-shaping logic for applications requiring stable, predictable timing.

A CMOS counter is a sequential digital-logic circuit that divides an input frequency through one or more binary stages. The CD4045B belongs to the 4000-series CMOS counter family and combines that counter function with oscillator-support circuitry. Its architecture makes it useful when a design needs both a divide-by-2^21 counting path and a separately shaped output rather than a simple standalone binary counter.

The primary features include 21 flip-flop counting stages, two flip-flops for shaping the output waveform, and push-pull operation from the inverter output drivers. The shaped output is specified for a 3.125% duty cycle. The manufacturer also states that every device is 100% tested for quiescent current at 20 V under 5 V, 10 V, and 15 V parametric ratings, providing production control for this timing function.

Technically, the CD4045B supports use in a crystal oscillator through its input inverters. When the counter stages are configured for division, the output-shaping flip-flops generate a stable waveform with the specified duty-cycle behavior, while the complementary inverter drivers provide push-pull output drive. This integration reduces the number of external logic blocks required for long-divide timing systems.

Typical uses include crystal-based timebase circuits, digital timers, programmable counters, frequency dividers, and embedded control systems that require a long division ratio. Its CMOS construction is particularly relevant to battery-operated digital equipment where low power dissipation and operation from a single supply are important. The exact supply limits, operating temperature range, and timing tolerances should be confirmed in the manufacturer datasheet before production release.

PCB design should provide a short, low-impedance supply path and place bypass capacitance close to the device. Keep oscillator and timing traces away from noisy switching nodes, and use the pin-description table in the manufacturer datasheet when assigning tracks. Because the counter contains many sequential stages, unused outputs should not be relied upon as arbitrary logic signals unless their documented operating state is understood.

This product page combines the manufacturer's functional description, package information, parametric-rating details, practical circuit guidance, and a structured replacement analysis. It also identifies which electrical and timing fields require confirmation from the CD4045B datasheet before a schematic or layout is approved.

Alternativas drop-in para CD4045BPW — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.

CD4045BPWR

✅ Drop-In
📦 16-TSSOP
Same 21-stage CD4045B function and 16-pin TSSOP footprint; ordering designation differs by reel packaging, with no electrical parameter difference stated.

📋 Alternativa de referência (fora do catálogo)

CD4045BPWT

✅ Drop-In ⚠️ Especificações não verificadas
📦 16-TSSOP
Same 21-stage CD4045B function and 16-pin TSSOP footprint; ordering designation differs by tube packaging, with no electrical parameter difference stated.

📋 Alternativa de referência (fora do catálogo)

CD4045BPW Classificações máximas e características elétricas

Product Type CMOS timing circuit and 21-stage counter
Counter Stages 21 flip-flop stages
Output-Shaping Flip-Flops 2 flip-flops
Output Drivers 2 inverter output drivers
Oscillator Support Input inverters for crystal oscillator use
Output Duty Cycle 3.125%
Output Drive Configuration Push-pull
Parametric Voltage Families 5 V, 10 V, and 15 V
Quiescent Current Test Voltage 20 V
Quiescent Current Production Test 100% tested
Logic Family CD4000-series CMOS
Encapsulamento 16-pin TSSOP
Package Width 0.173 inch (4.40 mm)
Tipo de montagem Surface mount
JEDEC Compatibility JEDEC Tentative Standard No. 13B for B-series CMOS devices

Guia de Configuração de Pinos do CD4045BPW 0.173 inch (4.40 mm)

Configuração de pinos para CD4045BPW (pacote 0.173 inch (4.40 mm)). Este CI digital inclui GPIO, interfaces de comunicação (UART, SPI, I2C) e pinos de alimentação. Consulte o datasheet do fabricante para funções alternativas dos pinos e opções de configuração. Essencial para projeto de sistemas embarcados e layout de PCB.

Diagrama de pinagem do pacote 0.173 inch (4.40 mm) para CD4045BPW

Nenhum dado detalhado de pinagem disponível para CD4045BPW.

Consulte a ficha técnica para a configuração completa dos pinos.

Aplicações típicas

CD4045BPW é adequado para 6 aplicaçãos: Crystal-Based Timebase, Programmable Digital Timer, Frequency Divider, Battery-Powered Digital Equipment, Sequential Control Logic, Pulse and Retiming Circuit.

⚡

Crystal-Based Timebase

The CD4045BPW fits a crystal timebase because its input inverters support oscillator use and its internal flip-flop stages create a shaped timing waveform. The 21 counter stages can divide the oscillator frequency into a lower-rate clock, while the specified 3.125% duty cycle provides a defined pulse shape for downstream timing. Designers should use the manufacturer oscillator circuit and pin table, select the crystal and load network for the target frequency, and account for oscillator startup margin. Because this is a long sequential timing chain, supply bypassing and short clock paths are important for repeatable operation.

⏱️

Programmable Digital Timer

The CD4045BPW can implement a long-interval digital timer by combining an oscillator with the device's 21 counting stages and shaped output. This architecture is useful when a design must divide an accurate reference into a much slower event rate without using a microcontroller. The push-pull inverter drivers provide an output stage intended for driving the next digital circuit, while the 3.125% duty cycle makes the waveform shape predictable. The actual timing accuracy depends on the oscillator components, supply behavior, counter temperature characteristics, and the load presented to the output, so those values should be validated against the manufacturer datasheet.

🔧

Frequency Divider

The 21-stage counting chain in CD4045BPW makes it appropriate for dividing a reference clock into a lower frequency with a high division ratio. Such dividers are common in clock-generation, pulse-rate, and sequential-control systems where a stable reference must be reduced before reaching another logic block. The two output-shaping flip-flops provide a 3.125% duty-cycle output, and the inverter drivers support push-pull operation. When using the device as a divider, confirm the counter configuration, output timing, and permissible operating frequency in the datasheet, and maintain a continuous return path from the oscillator or clock input to avoid undefined count states.

🔧

Battery-Powered Digital Equipment

CD4045BPW is suitable for battery-powered digital equipment where the timing function must operate with low dissipation. Texas Instruments identifies ultra-low-dissipation and battery-source operation as important CD4000-series applications, and the CD4045B is tested for quiescent current at 20 V across its 5 V, 10 V, and 15 V parametric families. In a portable timer or low-rate event counter, the long division chain can reduce clock activity and extend standby intervals. Actual battery life depends on the selected supply voltage, oscillator implementation, output duty cycle, load, and leakage, all of which should be evaluated in the final power budget.

🔧

Sequential Control Logic

The internal 21 flip-flop stages allow CD4045BPW to provide long sequential timing for industrial control and test equipment. A reference clock can be divided into a predictable event interval, and the shaped output can trigger a downstream latch, relay driver, measurement sequence, or counter. Because the CD4045B includes oscillator-support inverters, the same device can organize a local timebase rather than relying entirely on an external clock. Engineers should verify reset behavior and initialization requirements in the manufacturer datasheet, ensure the unused outputs are left in documented conditions, and avoid using a long counter as a substitute for a formal asynchronous reset protocol.

🔧

Pulse and Retiming Circuit

The CD4045BPW's two output-shaping flip-flops and push-pull inverter drivers make it useful for retiming and pulse-shaping functions beyond simple frequency division. The specified 3.125% duty cycle helps define the output waveform, and the long counter can establish repeated timing relationships in a pulse-generation system. This application is especially relevant when several downstream stages must be triggered at a controlled interval. The circuit designer must account for propagation delay, maximum operating frequency, supply-voltage sensitivity, and output loading; those timing details are not reproduced in the distributor summaries and must be taken from the official CD4045B datasheet.

Resumo dos produtos recomendados

CD4045BPWR Same CD4045B timing circuit in a reel-packaged 16-TSSOP configuration Usado em: Crystal-Based Timebase, Programmable Digital Timer CD4046BPW Texas Instruments Usado em: Crystal-Based Timebase, Programmable Digital Timer
What is the Texas Instruments CD4045BPW?
The Texas Instruments CD4045BPW is a 16-pin TSSOP CMOS timing circuit with 21 counter stages, two output-shaping flip-flops, two inverter output drivers, and input inverters for crystal-oscillator use. According to the manufacturer CD4045B product information, the output-shaping circuitry produces a 3.125% duty cycle and the inverter drivers provide push-pull operation.
How many counter stages does CD4045BPW have?
The CD4045BPW contains 21 flip-flop counting stages. The manufacturer describes the CD4045B configuration as a timing circuit that combines these 21 stages with two flip-flops for waveform shaping. Its long binary division chain makes the device suitable for timebase and frequency-divider circuits that require a high division ratio.
What is the output duty cycle of CD4045BPW?
The CD4045BPW output is shaped for a 3.125% duty cycle by two internal flip-flops. According to the Texas Instruments CD4045B product information, the counter and shaping stages work together to form the output waveform, while two inverter drivers provide push-pull output drive. This makes the device useful where predictable timing pulses are required.
Can CD4045BPW be used in a crystal oscillator?
Yes, the CD4045BPW includes input inverters intended for use in a crystal oscillator. The manufacturer identifies the oscillator connection as an application of the CD4045B timing circuit. The external crystal, feedback resistors, load capacitors, and operating frequency must be selected from the datasheet's recommended oscillator configuration.
What supply-voltage families are supported by CD4045BPW?
The CD4045BPW is identified with 5 V, 10 V, and 15 V CMOS parametric ratings, and every device is 100% tested for quiescent current at 20 V. According to the Texas Instruments CD4045B product page, this production testing controls quiescent-current behavior across the supported rating families, subject to the detailed operating limits in the datasheet.
Where can I download the CD4045BPW datasheet PDF?
The official CD4045BPW datasheet PDF is available through the Texas Instruments CD4045B document link on this page. The document is the appropriate source for the complete pin-description table, electrical characteristics, timing limits, and operating recommendations. Use the manufacturer PDF rather than a third-party archive when releasing a production design.
Where can I find the CD4045BPW pinout?
The CD4045BPW pinout must be assigned from the pin-description table in the Texas Instruments CD4045B datasheet. The public part descriptions identify the physical package as 16-pin TSSOP, but they do not reproduce the individual terminal assignments. Keep the layout tied to the exact manufacturer pin table and observe the package orientation mark.
Is CD4045BPW suitable for battery-powered timing?
The CD4045BPW is suitable for battery-powered digital equipment when its documented operating conditions are respected. Texas Instruments describes the CD4000-series application as digital equipment requiring ultra-low dissipation or battery-source operation. Actual current consumption depends on supply voltage, clock rate, output loading, and the specific timing configuration.
How does CD4045BPW compare with CD4046BPW?
CD4045BPW is a 21-stage counter with internal output-shaping flip-flops, while CD4046BPW is a phase-locked-loop, or PLL, timing IC. Although both are Texas Instruments CD4000-series 16-pin TSSOP devices, they implement different timing architectures and are not interchangeable without a complete functional and pin-level review.
When should I choose CD4045BPW over a basic binary counter?
Choose CD4045BPW when the design needs a long division ratio and a waveform with a defined 3.125% duty cycle rather than only a binary count output. Its 21 counter stages, two shaping flip-flops, and push-pull drivers can reduce external logic in timebase or frequency-divider designs. A basic counter remains preferable when only simple binary division is required.
What is the best drop-in replacement for CD4045BPW?
The closest documented same-footprint choice is CD4045BPWR, which uses the same 16-pin TSSOP device configuration and differs primarily in the orderable packaging designation. Before substitution, verify the exact pin assignments and electrical limits against the manufacturer datasheet. The Request a Quote form on this page can confirm the appropriate orderable suffix and current availability.
Can CD4045BPWR replace CD4045BPW?
CD4045BPWR can serve as a same-package replacement candidate because it identifies the same CD4045B function in a 16-pin TSSOP. The distinction is the orderable packaging designation, so engineers should confirm reel orientation, quantity, and marking requirements before replacing CD4045BPW in production. Use the Request a Quote form on this page for the exact suffix and lead time.
What can replace CD4045BPW?
CD4045BPWR is the principal replacement candidate identified for the CD4045B in a 16-pin TSSOP package. A valid drop-in substitution must retain the same terminal assignments, counter behavior, output duty-cycle requirement, supply limits, and environmental rating. Do not substitute the PLL-based CD4046BPW solely because it uses a similar package.
Is CD4045BPW the same as HEF4045B?
CD4045BPW and HEF4045B may both be used for similar CMOS timing functions, but they are not automatically interchangeable. The manufacturer suffix, pin assignment, supply-voltage limits, timing characteristics, package geometry, and operating-temperature grade must all be compared. Use the Request a Quote form on this page for sourcing support rather than treating a similar function number as proof of drop-in compatibility.
Where can I buy CD4045BPW and check its lead time?
Use the Request a Quote form on this page to request CD4045BPW pricing, current stock, minimum order quantity, and production lead time. The request can identify the required package suffix and delivery quantity. Lead time is not a fixed property of the IC and should be confirmed for the current order and packaging configuration.
What are the key specifications of CD4045BPW that engineers should know?
The key CD4045BPW specifications are 21 counter stages, two output-shaping flip-flops, two push-pull inverter output drivers, a 3.125% output duty cycle, and a 16-pin TSSOP package. Texas Instruments also specifies 5 V, 10 V, and 15 V parametric ratings and 100% quiescent-current testing at 20 V. Detailed timing and current limits remain in the manufacturer datasheet.
Is CD4045BPW currently active?
The Texas Instruments CD4045B product page remains available as the official source for the CD4045BPW family, supporting an active lifecycle classification. For production planning, request current lifecycle confirmation, stock, and lead time through the Request a Quote form on this page because availability can change independently of the device's product status.

Dados de referência de engenharia para CD4045BPW — comparação, orientação de projeto e informações de conformidade.

Guia de seleção

Choose CD4045BPW when the design requires a 21-stage CMOS counter, crystal-oscillator support, and a shaped output with a 3.125% duty cycle. It is particularly suitable for long-divide timebases, digital timers, and sequential pulse generators. CD4045BPWR or CD4045BPWT can serve as same-package orderable candidates when the required reel or tube format matches. Do not select CD4046BPW as a drop-in substitute: its PLL-based function may suit a different timing architecture, but it does not provide the same counter and shaping arrangement. For production qualification, verify the complete pin map, supply limits, timing characteristics, output loading, and temperature grade in the CD4045B datasheet before approving any replacement.

Comparação com alternativas

Parâmetro Este produto CD4045BPWR CD4045BPWT
Brand Texas Instruments Texas Instruments Texas Instruments
Package 16-TSSOP 16-TSSOP 16-TSSOP
Counter Stages 21 21 21
Output-Shaping Flip-Flops 2 2 2
Output Duty Cycle 3.125% 3.125% 3.125%
Output Drive Push-pull Push-pull Push-pull
Oscillator Support Input inverters for crystal oscillator use Input inverters for crystal oscillator use Input inverters for crystal oscillator use
Parametric Voltage Families 5 V, 10 V, and 15 V 5 V, 10 V, and 15 V 5 V, 10 V, and 15 V
Quiescent Current Test 100% tested at 20 V 100% tested at 20 V 100% tested at 20 V

Principais diferenciais

  • Integrated long division and waveform shaping (vs CD4046BPW)
  • Oscillator-support circuitry in the same timing device (vs CD4046BPW)
  • Defined push-pull output waveform (vs CD4046BPW)

Notas de projeto

Route the supply connection directly to the device and place the recommended bypass capacitor close to the power and ground terminals. The CD4045B can contain a long sequential counter chain, so supply disturbance may affect counting and output timing. Keep the oscillator loop compact, avoid routing it beside switching-power nodes, and use the manufacturer pin table to preserve the package orientation.

Treat the oscillator and clock path as a timing-sensitive layout region. Keep crystal leads short, keep the feedback network close to the relevant inputs, and return the ground connection directly to the device. Avoid long parallel runs beneath digital or switching signals because coupling can disturb oscillator startup and alter the division timing produced across the 21 counter stages.

Do not treat CD4045BPW as a generic 21-bit counter: its two internal flip-flops shape the output to a 3.125% duty cycle, and its push-pull drivers have defined load and timing limits. Confirm oscillator configuration, maximum clock frequency, reset requirements, and output loading in the manufacturer datasheet. CD4046BPW has a different PLL architecture and is not a functional or pin-for-pin substitute.

Select the supply rail from the documented 5 V, 10 V, or 15 V parametric families and include the supply tolerance, transient margin, and load-current budget. Although every CD4045B is production-tested for quiescent current at 20 V, that test does not by itself establish suitability for continuous operation at every rail. Evaluate static and clocked consumption under the intended operating condition.

Informações de conformidade

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Sem chumbo
Unknown
Sem halogênios
Unknown
Minerais de conflito
Unknown

Texas Instruments states that the CD4045B meets JEDEC Tentative Standard No. 13B for B-series CMOS device descriptions. RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals status are not stated in the available product information.

Buscas relacionadas

CD4045BPW datasheet CD4045BPW datasheet pdf CD4045BPW pinout CD4045BPW equivalent CD4045BPW replacement CD4045BPW cross reference CD4045BPW vs CD4046BPW CD4045BPW 21 stage counter CD4045BPW 16 TSSOP CD4045BPW crystal oscillator CD4045BPW price CD4045BPW stock Texas Instruments CD4045BPW what is CD4045BPW

Componentes & termos relacionados

Texas Instruments CD4045BPW CD4045BPWR CD4045BPWT CD4045B CD4046BPW CMOS counter IC logic IC sequential logic semiconductor 21-stage counter output-shaping flip-flop crystal oscillator frequency divider digital timer timebase push-pull output 3.125% duty cycle 16-pin TSSOP TSSOP package family surface-mount package JEDEC Standard No. 13B quiescent current battery-powered equipment
RFQ de cotação rápida
Preencha todos os detalhes — nossa equipe de vendas responderá em até 24 horas
Part number Fabricante Encapsulamento QTY Preço-alvo Total
✓
Cotação enviada!

Responderemos seu e-mail em até 24 horas

1
RFQ enviada
2
Cotação recebida
3
Pedido realizado
4
Pagamento
5
Enviado
6
Entregue
Ver detalhes da RFQ