CD4045BPW - 21-Stage CMOS Counter | Texas Instruments
부품 번호: CD4045BPW ✓ 활성CD4045BPW 개요
A CMOS counter is a sequential digital-logic circuit that divides an input frequency through one or more binary stages. The CD4045B belongs to the 4000-series CMOS counter family and combines that counter function with oscillator-support circuitry. Its architecture makes it useful when a design needs both a divide-by-2^21 counting path and a separately shaped output rather than a simple standalone binary counter.
The primary features include 21 flip-flop counting stages, two flip-flops for shaping the output waveform, and push-pull operation from the inverter output drivers. The shaped output is specified for a 3.125% duty cycle. The manufacturer also states that every device is 100% tested for quiescent current at 20 V under 5 V, 10 V, and 15 V parametric ratings, providing production control for this timing function.
Technically, the CD4045B supports use in a crystal oscillator through its input inverters. When the counter stages are configured for division, the output-shaping flip-flops generate a stable waveform with the specified duty-cycle behavior, while the complementary inverter drivers provide push-pull output drive. This integration reduces the number of external logic blocks required for long-divide timing systems.
Typical uses include crystal-based timebase circuits, digital timers, programmable counters, frequency dividers, and embedded control systems that require a long division ratio. Its CMOS construction is particularly relevant to battery-operated digital equipment where low power dissipation and operation from a single supply are important. The exact supply limits, operating temperature range, and timing tolerances should be confirmed in the manufacturer datasheet before production release.
PCB design should provide a short, low-impedance supply path and place bypass capacitance close to the device. Keep oscillator and timing traces away from noisy switching nodes, and use the pin-description table in the manufacturer datasheet when assigning tracks. Because the counter contains many sequential stages, unused outputs should not be relied upon as arbitrary logic signals unless their documented operating state is understood.
This product page combines the manufacturer's functional description, package information, parametric-rating details, practical circuit guidance, and a structured replacement analysis. It also identifies which electrical and timing fields require confirmation from the CD4045B datasheet before a schematic or layout is approved.
드롭인 대체품: CD4045BPW — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
CD4045BPWR
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
CD4045BPWT
✅ 드롭인 ⚠️ 사양 미검증📋 참조 대체품 (카탈로그에 없음)
CD4045BPW 최대 정격 & 전기적 특성
| Product Type | CMOS timing circuit and 21-stage counter |
| Counter Stages | 21 flip-flop stages |
| Output-Shaping Flip-Flops | 2 flip-flops |
| Output Drivers | 2 inverter output drivers |
| Oscillator Support | Input inverters for crystal oscillator use |
| Output Duty Cycle | 3.125% |
| Output Drive Configuration | Push-pull |
| Parametric Voltage Families | 5 V, 10 V, and 15 V |
| Quiescent Current Test Voltage | 20 V |
| Quiescent Current Production Test | 100% tested |
| Logic Family | CD4000-series CMOS |
| 패키지 | 16-pin TSSOP |
| Package Width | 0.173 inch (4.40 mm) |
| 실장 유형 | Surface mount |
| JEDEC Compatibility | JEDEC Tentative Standard No. 13B for B-series CMOS devices |
CD4045BPW 0.173 inch (4.40 mm) 핀 구성 가이드
CD4045BPW(0.173 inch (4.40 mm) 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: CD4045BPW.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
CD4045BPW 적합 용도: 6 애플리케이션s: Crystal-Based Timebase, Programmable Digital Timer, Frequency Divider, Battery-Powered Digital Equipment, Sequential Control Logic, Pulse and Retiming Circuit.
Crystal-Based Timebase
The CD4045BPW fits a crystal timebase because its input inverters support oscillator use and its internal flip-flop stages create a shaped timing waveform. The 21 counter stages can divide the oscillator frequency into a lower-rate clock, while the specified 3.125% duty cycle provides a defined pulse shape for downstream timing. Designers should use the manufacturer oscillator circuit and pin table, select the crystal and load network for the target frequency, and account for oscillator startup margin. Because this is a long sequential timing chain, supply bypassing and short clock paths are important for repeatable operation.
추천
Programmable Digital Timer
The CD4045BPW can implement a long-interval digital timer by combining an oscillator with the device's 21 counting stages and shaped output. This architecture is useful when a design must divide an accurate reference into a much slower event rate without using a microcontroller. The push-pull inverter drivers provide an output stage intended for driving the next digital circuit, while the 3.125% duty cycle makes the waveform shape predictable. The actual timing accuracy depends on the oscillator components, supply behavior, counter temperature characteristics, and the load presented to the output, so those values should be validated against the manufacturer datasheet.
추천
Frequency Divider
The 21-stage counting chain in CD4045BPW makes it appropriate for dividing a reference clock into a lower frequency with a high division ratio. Such dividers are common in clock-generation, pulse-rate, and sequential-control systems where a stable reference must be reduced before reaching another logic block. The two output-shaping flip-flops provide a 3.125% duty-cycle output, and the inverter drivers support push-pull operation. When using the device as a divider, confirm the counter configuration, output timing, and permissible operating frequency in the datasheet, and maintain a continuous return path from the oscillator or clock input to avoid undefined count states.
Battery-Powered Digital Equipment
CD4045BPW is suitable for battery-powered digital equipment where the timing function must operate with low dissipation. Texas Instruments identifies ultra-low-dissipation and battery-source operation as important CD4000-series applications, and the CD4045B is tested for quiescent current at 20 V across its 5 V, 10 V, and 15 V parametric families. In a portable timer or low-rate event counter, the long division chain can reduce clock activity and extend standby intervals. Actual battery life depends on the selected supply voltage, oscillator implementation, output duty cycle, load, and leakage, all of which should be evaluated in the final power budget.
Sequential Control Logic
The internal 21 flip-flop stages allow CD4045BPW to provide long sequential timing for industrial control and test equipment. A reference clock can be divided into a predictable event interval, and the shaped output can trigger a downstream latch, relay driver, measurement sequence, or counter. Because the CD4045B includes oscillator-support inverters, the same device can organize a local timebase rather than relying entirely on an external clock. Engineers should verify reset behavior and initialization requirements in the manufacturer datasheet, ensure the unused outputs are left in documented conditions, and avoid using a long counter as a substitute for a formal asynchronous reset protocol.
Pulse and Retiming Circuit
The CD4045BPW's two output-shaping flip-flops and push-pull inverter drivers make it useful for retiming and pulse-shaping functions beyond simple frequency division. The specified 3.125% duty cycle helps define the output waveform, and the long counter can establish repeated timing relationships in a pulse-generation system. This application is especially relevant when several downstream stages must be triggered at a controlled interval. The circuit designer must account for propagation delay, maximum operating frequency, supply-voltage sensitivity, and output loading; those timing details are not reproduced in the distributor summaries and must be taken from the official CD4045B datasheet.
추천 제품 요약
엔지니어링 참조 데이터: CD4045BPW — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | CD4045BPWR | CD4045BPWT |
|---|---|---|---|
| Brand | Texas Instruments | Texas Instruments | Texas Instruments |
| Package | 16-TSSOP | 16-TSSOP | 16-TSSOP |
| Counter Stages | 21 | 21 | 21 |
| Output-Shaping Flip-Flops | 2 | 2 | 2 |
| Output Duty Cycle | 3.125% | 3.125% | 3.125% |
| Output Drive | Push-pull | Push-pull | Push-pull |
| Oscillator Support | Input inverters for crystal oscillator use | Input inverters for crystal oscillator use | Input inverters for crystal oscillator use |
| Parametric Voltage Families | 5 V, 10 V, and 15 V | 5 V, 10 V, and 15 V | 5 V, 10 V, and 15 V |
| Quiescent Current Test | 100% tested at 20 V | 100% tested at 20 V | 100% tested at 20 V |
주요 차별점
- Integrated long division and waveform shaping (vs CD4046BPW)
- Oscillator-support circuitry in the same timing device (vs CD4046BPW)
- Defined push-pull output waveform (vs CD4046BPW)
설계 노트
Route the supply connection directly to the device and place the recommended bypass capacitor close to the power and ground terminals. The CD4045B can contain a long sequential counter chain, so supply disturbance may affect counting and output timing. Keep the oscillator loop compact, avoid routing it beside switching-power nodes, and use the manufacturer pin table to preserve the package orientation.
Treat the oscillator and clock path as a timing-sensitive layout region. Keep crystal leads short, keep the feedback network close to the relevant inputs, and return the ground connection directly to the device. Avoid long parallel runs beneath digital or switching signals because coupling can disturb oscillator startup and alter the division timing produced across the 21 counter stages.
Do not treat CD4045BPW as a generic 21-bit counter: its two internal flip-flops shape the output to a 3.125% duty cycle, and its push-pull drivers have defined load and timing limits. Confirm oscillator configuration, maximum clock frequency, reset requirements, and output loading in the manufacturer datasheet. CD4046BPW has a different PLL architecture and is not a functional or pin-for-pin substitute.
Select the supply rail from the documented 5 V, 10 V, or 15 V parametric families and include the supply tolerance, transient margin, and load-current budget. Although every CD4045B is production-tested for quiescent current at 20 V, that test does not by itself establish suitability for continuous operation at every rail. Evaluate static and clocked consumption under the intended operating condition.
규정 준수 정보
Texas Instruments states that the CD4045B meets JEDEC Tentative Standard No. 13B for B-series CMOS device descriptions. RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals status are not stated in the available product information.