Texas Instruments

CD4518BCN Dual BCD Up-Counter | Texas Instruments

N.º da peça: CD4518BCN ✓ Ativo
16-pin DIP Package Positive-going or negative-going transition Speed
MOQ: 1 |

CD4518BCN Visão geral

The Texas Instruments CD4518BCN is a CMOS dual BCD up-counter containing two identical, internally synchronous four-stage counters in a 16-pin through-hole DIP package. Each counter can increment on either a positive-going or negative-going clock transition, and the clock and enable functions are interchangeable. The device therefore provides two decimal counting channels in one package, with each channel able to count from 0000 through 9999 and roll over to 0000.

A BCD counter is a digital counter category that represents each decimal digit with four binary bits rather than counting directly in a binary sequence. The dual-counter structure places two independent decimal counting channels into one integrated circuit, making the CD4518BCN part of the CMOS logic family within the broader hierarchy of digital counter ICs, logic ICs, and semiconductors. Its decimal organization is particularly useful when driving displays, sequencing decade-based events, or generating multi-digit timing and counting functions.

The principal features include two four-stage BCD up-counters, interchangeable positive-going or negative-going clock and enable inputs, and separate reset control for each counter. The two counters can operate independently or be cascaded when a larger decimal count range is required. Because the device uses four-stage counting channels, one counter provides four decimal digits. Cascading the two counters can extend the overall counting range when the carry output of one channel drives the other channel.

Internally, each counter stage is based on D-type flip-flop behavior, which supports synchronous state changes and predictable carry propagation. The manufacturer describes the CD4518B family as a CMOS dual BCD up-counter, while the CD4518BCN ordering designation identifies the 16-pin DIP configuration associated with the CD4518B device. The through-hole package also supports conventional PCB assembly and prototype rework, although it occupies more board area than a surface-mount equivalent.

Typical uses include decade counters, event counters, digital timing systems, pulse-counting equipment, display sequencing, industrial control logic, and laboratory instruments. In a two-digit display system, the two counter channels can count separate decimal positions or be coordinated through a suitable driver interface. In a timing application, the BCD output can represent elapsed tens and units directly, while reset inputs provide a controlled return to zero.

The primary design consideration is ensuring that each clock, enable, reset, and output connection matches the intended counting edge and counter channel. Decoupling capacitors should be placed close to the supply pins, unused inputs should not be left floating, and all signals must remain within the device’s specified voltage and temperature limits. Because the part is a legacy through-hole CMOS logic device, engineers should confirm lifecycle status, availability, and exact manufacturer ordering information before committing a new design.

Alternativas drop-in para CD4518BCN — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.

Variantes desta série

Modelos da mesma série compatíveis como drop-in com CD4518BCN (mesmo formato e footprint) — diferindo em Counter Type, Logic Family, Operating Temperature Range.

Texas Instruments
Counter Type: Dual BCD up-counter
Logic Family: CMOS CD4000 series
Operating Temperature Range: -55 C to +125 C
Comparar com CD4518BCN →

CD4518BN

✅ Drop-In ⚠️ Especificações não verificadas
📦 16-pin DIP
0% counter-function difference; same dual four-stage BCD architecture and 16-pin DIP format

📋 Alternativa de referência (fora do catálogo)

CD4518BE

✅ Drop-In
Texas Instruments
📦 16-pin DIP
Dual BCD up-counter · CMOS CD4000 series · 2 sections · 4 bits · 4 stages per section · Binary-coded decimal (BCD) · 8 MHz · 3 V to 18 V

Consulte o preço

Ver ficha técnica →

CD4518BCN

✅ Drop-In
Texas Instruments
📦 16-pin DIP
BCD up-counter · 2 · 4 · 0000 to 9999 per counter · CMOS · Positive-going or negative-going transition

Consulte o preço

Ver ficha técnica →

CD4518BCN

✅ Drop-In
Texas Instruments
📦 16-pin DIP
BCD up-counter · 2 · 4 · 0000 to 9999 per counter · CMOS · Positive-going or negative-going transition

Consulte o preço

Ver ficha técnica →

MM14518BCN

✅ Drop-In
📦 16-pin DIP
0% functional difference; MM14518 naming with the same dual BCD counter and 16-pin DIP format

📋 Alternativa de referência (fora do catálogo)

CD4518BCN Classificações máximas e características elétricas

Counter Type BCD up-counter
Number of Counter Elements 2
Stages per Counter 4
Counting Sequence 0000 to 9999 per counter
Logic Family CMOS
Clock Edge Positive-going or negative-going transition
Faixa de temperatura de operação -55 °C to +125 °C
Encapsulamento 16-pin DIP
Terminal Count 16 terminals
Tipo de montagem Through-hole

Guia de Configuração de Pinos do CD4518BCN 16-pin dip

Configuração de pinos para CD4518BCN (pacote 16-pin dip). Este CI digital inclui GPIO, interfaces de comunicação (UART, SPI, I2C) e pinos de alimentação. Consulte o datasheet do fabricante para funções alternativas dos pinos e opções de configuração. Essencial para projeto de sistemas embarcados e layout de PCB.

Diagrama de pinagem do pacote 16-pin dip para CD4518BCN

Nenhum dado detalhado de pinagem disponível para CD4518BCN.

Consulte a ficha técnica para a configuração completa dos pinos.

Aplicações típicas

CD4518BCN é adequado para 6 aplicaçãos: Industrial Pulse and Event Counting, Digital Display Sequencing, Laboratory Timing Reference, Digital Clock and Timer, Traffic and Access Control Sequencing, Legacy Control-System Maintenance.

🏭

Industrial Pulse and Event Counting

The CD4518BCN is well suited to counting mechanical or electronic events because it provides two independent four-stage decimal counters in one 16-pin DIP package. Each channel can count from 0000 through 9999 and can be advanced on the appropriate clock edge. A sensor-conditioned pulse train can drive the clock input, while the enable input provides run, hold, and gating control. The BCD outputs can be read directly by compatible logic, latched for display, or used as decade stages in a longer counter. The DIP format also simplifies insertion and replacement in industrial control equipment where through-hole repairability is valuable.

📺

Digital Display Sequencing

The CD4518BCN can provide decimal timing or sequencing values for a multi-digit display because every four-stage counter represents four BCD digits. Two counters in the same package allow separate decimal positions to be advanced, coordinated, or cascaded when more than four digits are required. The counter outputs can feed display-decoder logic or be captured by a controller for multiplexing. Its 16-pin through-hole package is particularly useful when updating an existing display controller without changing the board footprint or introducing a new surface-mount assembly process.

🔧

Laboratory Timing Reference

The two independently clocked decimal counters in the CD4518BCN make it possible to divide an external reference into two related time intervals without using two separate counter packages. One channel can count test events or elapsed units while the other counts a different interval, and separate enable inputs permit each section to be started or stopped. The BCD representation supports readable decade outputs, while reset inputs return the counters to their zero state. Through-hole construction and a 16-pin footprint make the device convenient for prototyping timers, pulse generators, and laboratory timing fixtures.

🖥️

Digital Clock and Timer

A CD4518BCN can form the decimal counting core of a digital clock by assigning one counter to seconds and another to minutes, or by cascading channels for larger intervals. Each counter advances on a selected clock transition and supports independent enable and reset control, which simplifies test and startup sequencing. The four-digit capacity of each section covers 0000 through 9999 before rollover. A conventional through-hole clock board can therefore retain its existing DIP footprint while the BCD outputs drive decoder, display, or controller stages.

🚗

Traffic and Access Control Sequencing

The CD4518BCN can implement duration or event sequencing in access-control and traffic-control systems where decimal count states correspond to operating phases. One counter can track a timed phase while the other records cycles, and reset inputs provide a defined initialization state after each system event. The interchangeable clock and enable inputs allow the logic to be synchronized with a system master clock. A 16-pin DIP package supports legacy through-hole control boards, and the BCD outputs can be compared against preset values to establish timing windows.

🧩

Legacy Control-System Maintenance

The CD4518BCN is a practical option for maintaining equipment built around the CD4000 CMOS logic family, particularly boards with a 16-pin through-hole counter footprint. Its dual four-stage BCD architecture consolidates two counting functions while preserving familiar decade outputs and discrete reset, enable, and clock connections. This is useful when repairing older industrial, instrumentation, or appliance controllers without redesigning the surrounding logic. Engineers should verify the original manufacturer, pinout, electrical limits, and availability before installing a cross-manufacturer equivalent.

What is the CD4518BCN?
The CD4518BCN is a CMOS dual BCD up-counter with two independent, internally synchronous four-stage counters in a 16-pin DIP package. According to the Texas Instruments CD4518B product page, each counter can increment on either a positive-going or negative-going transition, and the clock and enable lines are interchangeable. This makes the device suitable for decimal event counting, multi-digit timing, display sequencing, and industrial pulse-counting systems.
What are the key specifications of CD4518BCN that engineers should know?
The CD4518BCN is a 16-pin DIP dual BCD up-counter built from CMOS logic. Its key ratings are two counting elements, four stages per counter, a decimal range of 0000 through 9999 per channel, and operation across a stated -55 °C to +125 °C temperature range. According to the Texas Instruments CD4518B documentation, the clock and enable inputs can serve interchangeably for incrementing on either clock edge.
Where can I download the CD4518B datasheet PDF?
The CD4518B documentation is available through the Texas Instruments product and literature links, including the CD4518B guide at ti.com/lit/gpn/CD4518B. That document is the appropriate starting point for the CD4518BCN because the ordering suffix identifies the 16-pin through-hole package. Use its pin-description table and electrical-characteristics tables when assigning PCB connections and verifying voltage, timing, and environmental limits.
Where can I find the CD4518BCN pinout?
The CD4518BCN pinout is shown in the manufacturer’s CD4518B pin-description table. The device has 16 pins arranged in a standard dual-in-line package, with pin 1 identified by the package marking convention. Use the pin-description table to map the two clock, enable, reset, and BCD output groups and to identify VDD and GND before assigning tracks on a new PCB.
How many digits can each CD4518BCN counter count?
Each CD4518BCN counting channel contains four BCD stages and therefore represents four decimal digits. Its intended sequence extends from 0000 to 9999 before rolling back to 0000. According to the Texas Instruments CD4518B product description, the device consists of two identical four-stage internally synchronous counters, so two channels are available in the same 16-pin package.
Can CD4518BCN count on both rising and falling clock edges?
Yes. The CD4518BCN can increment on either a positive-going or negative-going clock transition because the clock and enable lines are interchangeable. According to the Texas Instruments CD4518B product description, this arrangement gives the designer control over which transition advances the counter. The reset function should be inactive during normal counting because a reset assertion returns the corresponding channel to zero.
What can replace the CD4518BCN?
A drop-in replacement for the CD4518BCN should be a 16-pin DIP device with two four-stage BCD up-counters, compatible clock, enable, reset, and output functions. Legacy manufacturer-marked versions of CD4518BCN and the MM14518BCN are the closest documented alternatives in this classification. CD4518BE is functionally similar but uses a different package and therefore is not a true drop-in replacement for a DIP-based PCB.
Is CD4518BCN the same as CD4518BE?
The CD4518BCN and CD4518BE provide the same dual BCD up-counter logic, but they are not the same physical drop-in part. The documented distinction is package type: CD4518BCN uses a 16-terminal through-hole DIP, while CD4518BE uses a different surface-mount package variant. A PCB designed around the DIP footprint therefore requires mechanical and pin-orientation changes before CD4518BE can be substituted.
CD4518BCN vs CD4518BE - which is better for a legacy PCB?
CD4518BCN is the correct choice for a legacy PCB designed with a 16-pin through-hole footprint because it preserves that mechanical format. CD4518BE has equivalent dual BCD counter functionality but is listed in a different package variant, so it cannot replace CD4518BCN without changing the land pattern and verifying the pin orientation. For a new surface-mount design, CD4518BE may be preferable when its availability and lifecycle requirements are acceptable.
When should I choose CD4518BCN over another CD4518B package?
Choose CD4518BCN when the board uses a 16-pin through-hole DIP footprint, the design must be assembled with conventional through-hole processes, or an existing legacy design is being maintained. A surface-mount CD4518B variant may be preferable for a new, space-constrained board, but changing package types requires a new footprint and careful pin-orientation review. The CD4518BCN is therefore strongest when mechanical continuity matters more than board-area reduction.
Is CD4518BCN suitable for industrial counter applications?
The CD4518BCN is suitable for industrial counting applications when the complete operating conditions remain within the device’s specified limits. Its stated temperature range is -55 °C to +125 °C, and the 16-pin DIP construction supports through-hole assembly. Its counter function is appropriate for pulse totals, machine-event counts, and timing references, although supply voltage, clock-frequency, noise, and reset timing limits must be checked in the manufacturer’s electrical-characteristics tables.
Where can I buy CD4518BCN and check its current availability?
Use the Request a Quote form on this page to request current CD4518BCN availability, sourcing support, and the quantity needed for your build. The part has appeared under multiple legacy manufacturer identities, so the request should specify the required package, operating-temperature grade, and acceptable manufacturer source. Confirm the manufacturer part number and lifecycle status before releasing a production order.
What is the price of CD4518BCN?
Current commercial terms for the CD4518BCN are available through the Request a Quote form on this page. The structured pricing fields are refreshed as sourcing data changes, so a static quotation in a technical article can become inaccurate. Submit the required quantity, package, and target manufacturer criteria to obtain a current response suitable for purchasing and production planning.
What is the lead time for CD4518BCN?
The current lead time for the CD4518BCN should be confirmed through the Request a Quote form on this page. Because this CMOS counter has been cataloged by several manufacturers and remains available in legacy packaging, sourcing status can vary by exact manufacturer, quantity, and delivery schedule. Include your required delivery date and acceptable manufacturer sources when requesting a quotation.
Is CD4518BCN in stock?
Current CD4518BCN stock status should be checked through the Request a Quote form on this page. The product is a dual BCD up-counter in a 16-pin DIP package, but exact manufacturer and package combinations may differ in availability. Provide the required quantity and production schedule so the current sourcing response can be matched to your build rather than relying on a historical listing.
What is the best onsemi equivalent for CD4518BCN?
The onsemi CD4518BCN is the closest branded equivalent because it retains the same CD4518BCN ordering code, dual BCD counter function, and 16-pin DIP mechanical format. The Texas Instruments CD4518B family offers equivalent counter architecture, but its suffix must be checked to ensure the selected ordering option has the required package. Functional equivalence alone does not establish drop-in suitability when the package or pin orientation changes.

Dados de referência de engenharia para CD4518BCN — comparação, orientação de projeto e informações de conformidade.

Guia de seleção

Choose CD4518BCN when maintaining or designing around a 16-pin through-hole footprint that requires two independent four-stage BCD counters. It is particularly useful for legacy industrial, display, timing, and pulse-counting boards where changing the package would create unnecessary mechanical and inspection work. A surface-mount CD4518BE should be considered for a new board only when a footprint redesign is acceptable; despite equivalent counter logic, it is not a physical drop-in replacement. When sourcing across manufacturers, verify the exact 16-pin DIP ordering option, operating-temperature grade, electrical limits, and lifecycle status. MM14518BCN and manufacturer-marked CD4518BCN versions may support legacy procurement, but their documentation should be reviewed before installation because reset polarity, electrical ratings, and sourcing history can vary between implementations.

Comparação com alternativas

Parâmetro Este produto CD4518BN CD4518B CD4518BCN CD4518BCN MM14518BCN
Brand Texas Instruments Texas Instruments Texas Instruments onsemi Fairchild Semiconductor Motorola
Package 16-pin DIP 16-pin DIP - same 16-pin DIP - same 16-pin DIP - same 16-pin DIP - same 16-pin DIP - same
Counter Type BCD up-counter BCD up-counter BCD up-counter BCD up-counter BCD up-counter BCD up-counter
Number of Counter Elements 2 2 2 2 2 2
Stages per Counter 4 4 4 4 4 4
Decimal Capacity per Channel 0000 to 9999 0000 to 9999 0000 to 9999 0000 to 9999 0000 to 9999 0000 to 9999
Clock Edge Selection Positive-going or negative-going transition Positive-going or negative-going transition Positive-going or negative-going transition Positive-going or negative-going transition Positive-going or negative-going transition Positive-going or negative-going transition
Logic Technology CMOS CMOS CMOS CMOS CMOS CMOS
Mounting Type Through-hole Through-hole Through-hole Through-hole Through-hole Through-hole

Principais diferenciais

  • Two complete decimal counters in one 16-pin package (vs CD4518BE)
  • Positive-going or negative-going counting flexibility (vs MM14518BCN)
  • Direct continuity with legacy CD4518BCN boards (vs CD4518B)

Notas de projeto

Do not substitute CD4518BE directly for CD4518BCN on a through-hole PCB. Although the dual BCD counter logic is equivalent, CD4518BE uses a different package variant, so the PCB land pattern, lead spacing, and pin orientation must be changed. Before fitting any alternative, verify that the selected orderable part has 16 DIP pins and confirm the manufacturer pin-description table.

Place the supply-decoupling capacitor close to VDD and GND, and keep the clock, enable, and reset traces short enough to avoid unintended transitions. These signals determine whether the counter advances, holds, or returns to zero. In through-hole designs, route sensitive clock and reset nets away from high-current switching nodes, use a common ground reference, and avoid long parallel traces where coupled noise could create false count events.

The CD4518BCN requires the supply voltage and input levels to remain within the limits published in the manufacturer datasheet. Because this is a CMOS logic IC, unused inputs should be tied to a defined valid logic level rather than left floating. Check every clock and enable transition against the supported voltage range, and ensure power-supply sequencing cannot briefly drive an input outside the device’s absolute maximum conditions.

For cascaded counting, route the first counter’s carry output directly to the second counter’s clock input and confirm that the propagation delay does not violate the intended setup time. Keep the reset paths independent unless simultaneous clearing is required. During PCB layout, follow the package drawing for the exposed board side of each through-hole pin and maintain the orientation marker near pin 1.

Informações de conformidade

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Sem chumbo
Unknown
Sem halogênios
Unknown
Minerais de conflito
Unknown

The manufacturer documentation identifies a CMOS logic counter but does not provide explicit RoHS, REACH, lead-free, halogen-free, or conflict-minerals statements for this ordering code. AEC-Q100 is not applicable because the CD4518BCN is not presented as an automotive-qualified device.

Buscas relacionadas

cd4518b datasheet CD4518BCN datasheet CD4518BCN pinout CD4518BCN datasheet PDF CD4518BCN equivalent CD4518BCN replacement CD4518BCN cross reference CD4518BCN vs CD4518BE Texas Instruments CD4518BCN CD4518BCN DIP-16 pinout CD4518BCN application circuit CD4518BCN price CD4518BCN stock Where to buy CD4518BCN CD4518BCN lead time

Componentes & termos relacionados

Texas Instruments onsemi Fairchild Semiconductor Motorola CD4518BCN CD4518B CD4518BN CD4518BE MM14518BCN BCD counter decimal counter up-counter CMOS logic logic IC digital counter D-type flip-flop synchronous counter interchangeable clock and enable DIP-16 through-hole package surface mount industrial control display sequencing pulse counting digital timing
RFQ de cotação rápida
Preencha todos os detalhes — nossa equipe de vendas responderá em até 24 horas
Part number Fabricante Encapsulamento QTY Preço-alvo Total
✓
Cotação enviada!

Responderemos seu e-mail em até 24 horas

1
RFQ enviada
2
Cotação recebida
3
Pedido realizado
4
Pagamento
5
Enviado
6
Entregue
Ver detalhes da RFQ