CD4518BCN Dual BCD Up-Counter | Texas Instruments
MPN: CD4518BCN ✓ AktifCD4518BCN Genel Bakış
A BCD counter is a digital counter category that represents each decimal digit with four binary bits rather than counting directly in a binary sequence. The dual-counter structure places two independent decimal counting channels into one integrated circuit, making the CD4518BCN part of the CMOS logic family within the broader hierarchy of digital counter ICs, logic ICs, and semiconductors. Its decimal organization is particularly useful when driving displays, sequencing decade-based events, or generating multi-digit timing and counting functions.
The principal features include two four-stage BCD up-counters, interchangeable positive-going or negative-going clock and enable inputs, and separate reset control for each counter. The two counters can operate independently or be cascaded when a larger decimal count range is required. Because the device uses four-stage counting channels, one counter provides four decimal digits. Cascading the two counters can extend the overall counting range when the carry output of one channel drives the other channel.
Internally, each counter stage is based on D-type flip-flop behavior, which supports synchronous state changes and predictable carry propagation. The manufacturer describes the CD4518B family as a CMOS dual BCD up-counter, while the CD4518BCN ordering designation identifies the 16-pin DIP configuration associated with the CD4518B device. The through-hole package also supports conventional PCB assembly and prototype rework, although it occupies more board area than a surface-mount equivalent.
Typical uses include decade counters, event counters, digital timing systems, pulse-counting equipment, display sequencing, industrial control logic, and laboratory instruments. In a two-digit display system, the two counter channels can count separate decimal positions or be coordinated through a suitable driver interface. In a timing application, the BCD output can represent elapsed tens and units directly, while reset inputs provide a controlled return to zero.
The primary design consideration is ensuring that each clock, enable, reset, and output connection matches the intended counting edge and counter channel. Decoupling capacitors should be placed close to the supply pins, unused inputs should not be left floating, and all signals must remain within the device’s specified voltage and temperature limits. Because the part is a legacy through-hole CMOS logic device, engineers should confirm lifecycle status, availability, and exact manufacturer ordering information before committing a new design.
Drop-in alternatifler için CD4518BCN — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.
Bu Serideki Variantlar
Yedek parça uyumlu olan aynı serideki modeller CD4518BCN (aynı form faktörü ve ayağa oturma) — farklı olan Counter Type, Logic Family, Operating Temperature Range.
CD4518BN
✅ Yerleştirme ⚠️ Onaylanmamış Özellikler📋 Katalogda Olmayan Referans Alternatifi
CD4518BE
✅ YerleştirmeFiyat için iletişime geçin
Veri Şablonunu Görüntüle →CD4518BCN
✅ YerleştirmeFiyat için iletişime geçin
Veri Şablonunu Görüntüle →CD4518BCN
✅ YerleştirmeFiyat için iletişime geçin
Veri Şablonunu Görüntüle →MM14518BCN
✅ Yerleştirme📋 Katalogda Olmayan Referans Alternatifi
CD4518BCN Maksimum Değerlendirmeler & Elektriksel Özellikler
| Counter Type | BCD up-counter |
| Number of Counter Elements | 2 |
| Stages per Counter | 4 |
| Counting Sequence | 0000 to 9999 per counter |
| Logic Family | CMOS |
| Clock Edge | Positive-going or negative-going transition |
| İşletim Sıcaklığı Aralığı | -55 °C to +125 °C |
| Paket | 16-pin DIP |
| Terminal Count | 16 terminals |
| Montaj Türü | Through-hole |
CD4518BCN 16-pin dip Pin Yapısı Kılavuzu
CD4518BCN (16-pin dip paket) için pin yapısı. Bu dijital IC, GPIO, iletişim arayüzleri (UART, SPI, I2C) ve güç pinleri içerir. Alternatif pin işlevleri ve yapılandırma seçenekleri için üretici veri kitapçığını referans alın. Tünel sistem tasarımı ve PCB yerleşimi için temel bir bileşendir.
Ayrıntılı pin çıkış verisi mevcut değil: CD4518BCN.
Aşağıdaki veri sayfası tam pin konfigürasyonu için.
Tipik Uygulamalar
CD4518BCN için uygundur 6 uygulamas: Industrial Pulse and Event Counting, Digital Display Sequencing, Laboratory Timing Reference, Digital Clock and Timer, Traffic and Access Control Sequencing, Legacy Control-System Maintenance.
Industrial Pulse and Event Counting
The CD4518BCN is well suited to counting mechanical or electronic events because it provides two independent four-stage decimal counters in one 16-pin DIP package. Each channel can count from 0000 through 9999 and can be advanced on the appropriate clock edge. A sensor-conditioned pulse train can drive the clock input, while the enable input provides run, hold, and gating control. The BCD outputs can be read directly by compatible logic, latched for display, or used as decade stages in a longer counter. The DIP format also simplifies insertion and replacement in industrial control equipment where through-hole repairability is valuable.
Önerilen
Digital Display Sequencing
The CD4518BCN can provide decimal timing or sequencing values for a multi-digit display because every four-stage counter represents four BCD digits. Two counters in the same package allow separate decimal positions to be advanced, coordinated, or cascaded when more than four digits are required. The counter outputs can feed display-decoder logic or be captured by a controller for multiplexing. Its 16-pin through-hole package is particularly useful when updating an existing display controller without changing the board footprint or introducing a new surface-mount assembly process.
Önerilen
Laboratory Timing Reference
The two independently clocked decimal counters in the CD4518BCN make it possible to divide an external reference into two related time intervals without using two separate counter packages. One channel can count test events or elapsed units while the other counts a different interval, and separate enable inputs permit each section to be started or stopped. The BCD representation supports readable decade outputs, while reset inputs return the counters to their zero state. Through-hole construction and a 16-pin footprint make the device convenient for prototyping timers, pulse generators, and laboratory timing fixtures.
Önerilen
Digital Clock and Timer
A CD4518BCN can form the decimal counting core of a digital clock by assigning one counter to seconds and another to minutes, or by cascading channels for larger intervals. Each counter advances on a selected clock transition and supports independent enable and reset control, which simplifies test and startup sequencing. The four-digit capacity of each section covers 0000 through 9999 before rollover. A conventional through-hole clock board can therefore retain its existing DIP footprint while the BCD outputs drive decoder, display, or controller stages.
Önerilen
Traffic and Access Control Sequencing
The CD4518BCN can implement duration or event sequencing in access-control and traffic-control systems where decimal count states correspond to operating phases. One counter can track a timed phase while the other records cycles, and reset inputs provide a defined initialization state after each system event. The interchangeable clock and enable inputs allow the logic to be synchronized with a system master clock. A 16-pin DIP package supports legacy through-hole control boards, and the BCD outputs can be compared against preset values to establish timing windows.
Önerilen
Legacy Control-System Maintenance
The CD4518BCN is a practical option for maintaining equipment built around the CD4000 CMOS logic family, particularly boards with a 16-pin through-hole counter footprint. Its dual four-stage BCD architecture consolidates two counting functions while preserving familiar decade outputs and discrete reset, enable, and clock connections. This is useful when repairing older industrial, instrumentation, or appliance controllers without redesigning the surrounding logic. Engineers should verify the original manufacturer, pinout, electrical limits, and availability before installing a cross-manufacturer equivalent.
Önerilen
Önerilen Ürünler Özeti
Mühendislik referans verileri: CD4518BCN — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.
Seçim Kılavuzu
Alternatiflerle Karşılaştırma
| Parametre | Bu Ürün | CD4518BN | CD4518B | CD4518BCN | CD4518BCN | MM14518BCN |
|---|---|---|---|---|---|---|
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | onsemi | Fairchild Semiconductor | Motorola |
| Package | 16-pin DIP | 16-pin DIP - same | 16-pin DIP - same | 16-pin DIP - same | 16-pin DIP - same | 16-pin DIP - same |
| Counter Type | BCD up-counter | BCD up-counter | BCD up-counter | BCD up-counter | BCD up-counter | BCD up-counter |
| Number of Counter Elements | 2 | 2 | 2 | 2 | 2 | 2 |
| Stages per Counter | 4 | 4 | 4 | 4 | 4 | 4 |
| Decimal Capacity per Channel | 0000 to 9999 | 0000 to 9999 | 0000 to 9999 | 0000 to 9999 | 0000 to 9999 | 0000 to 9999 |
| Clock Edge Selection | Positive-going or negative-going transition | Positive-going or negative-going transition | Positive-going or negative-going transition | Positive-going or negative-going transition | Positive-going or negative-going transition | Positive-going or negative-going transition |
| Logic Technology | CMOS | CMOS | CMOS | CMOS | CMOS | CMOS |
| Mounting Type | Through-hole | Through-hole | Through-hole | Through-hole | Through-hole | Through-hole |
Ana Farklılayıcılar
- Two complete decimal counters in one 16-pin package (karşılaştırma:CD4518BE)
- Positive-going or negative-going counting flexibility (karşılaştırma:MM14518BCN)
- Direct continuity with legacy CD4518BCN boards (karşılaştırma:CD4518B)
Tasarım Notları
Do not substitute CD4518BE directly for CD4518BCN on a through-hole PCB. Although the dual BCD counter logic is equivalent, CD4518BE uses a different package variant, so the PCB land pattern, lead spacing, and pin orientation must be changed. Before fitting any alternative, verify that the selected orderable part has 16 DIP pins and confirm the manufacturer pin-description table.
Place the supply-decoupling capacitor close to VDD and GND, and keep the clock, enable, and reset traces short enough to avoid unintended transitions. These signals determine whether the counter advances, holds, or returns to zero. In through-hole designs, route sensitive clock and reset nets away from high-current switching nodes, use a common ground reference, and avoid long parallel traces where coupled noise could create false count events.
The CD4518BCN requires the supply voltage and input levels to remain within the limits published in the manufacturer datasheet. Because this is a CMOS logic IC, unused inputs should be tied to a defined valid logic level rather than left floating. Check every clock and enable transition against the supported voltage range, and ensure power-supply sequencing cannot briefly drive an input outside the device’s absolute maximum conditions.
For cascaded counting, route the first counter’s carry output directly to the second counter’s clock input and confirm that the propagation delay does not violate the intended setup time. Keep the reset paths independent unless simultaneous clearing is required. During PCB layout, follow the package drawing for the exposed board side of each through-hole pin and maintain the orientation marker near pin 1.
Uyumluluk Bilgisi
The manufacturer documentation identifies a CMOS logic counter but does not provide explicit RoHS, REACH, lead-free, halogen-free, or conflict-minerals statements for this ordering code. AEC-Q100 is not applicable because the CD4518BCN is not presented as an automotive-qualified device.