CD4518BCN Dual BCD Up-Counter | Texas Instruments
部品番号: CD4518BCN ✓ 生産中CD4518BCN 概要
A BCD counter is a digital counter category that represents each decimal digit with four binary bits rather than counting directly in a binary sequence. The dual-counter structure places two independent decimal counting channels into one integrated circuit, making the CD4518BCN part of the CMOS logic family within the broader hierarchy of digital counter ICs, logic ICs, and semiconductors. Its decimal organization is particularly useful when driving displays, sequencing decade-based events, or generating multi-digit timing and counting functions.
The principal features include two four-stage BCD up-counters, interchangeable positive-going or negative-going clock and enable inputs, and separate reset control for each counter. The two counters can operate independently or be cascaded when a larger decimal count range is required. Because the device uses four-stage counting channels, one counter provides four decimal digits. Cascading the two counters can extend the overall counting range when the carry output of one channel drives the other channel.
Internally, each counter stage is based on D-type flip-flop behavior, which supports synchronous state changes and predictable carry propagation. The manufacturer describes the CD4518B family as a CMOS dual BCD up-counter, while the CD4518BCN ordering designation identifies the 16-pin DIP configuration associated with the CD4518B device. The through-hole package also supports conventional PCB assembly and prototype rework, although it occupies more board area than a surface-mount equivalent.
Typical uses include decade counters, event counters, digital timing systems, pulse-counting equipment, display sequencing, industrial control logic, and laboratory instruments. In a two-digit display system, the two counter channels can count separate decimal positions or be coordinated through a suitable driver interface. In a timing application, the BCD output can represent elapsed tens and units directly, while reset inputs provide a controlled return to zero.
The primary design consideration is ensuring that each clock, enable, reset, and output connection matches the intended counting edge and counter channel. Decoupling capacitors should be placed close to the supply pins, unused inputs should not be left floating, and all signals must remain within the device’s specified voltage and temperature limits. Because the part is a legacy through-hole CMOS logic device, engineers should confirm lifecycle status, availability, and exact manufacturer ordering information before committing a new design.
ドロップイン代替品: CD4518BCN — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: CD4518BCN (同一形状・フットプリント) — 相違点: Counter Type, Logic Family, Operating Temperature Range.
CD4518BN
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品(カタログ未掲載)
CD4518BE
✅ ドロップイン価格はお問い合わせください
データシートを見る →CD4518BCN
✅ ドロップイン価格はお問い合わせください
データシートを見る →CD4518BCN
✅ ドロップイン価格はお問い合わせください
データシートを見る →MM14518BCN
✅ ドロップイン📋 参考代替品(カタログ未掲載)
CD4518BCN 最大定格&電気的特性
| Counter Type | BCD up-counter |
| Number of Counter Elements | 2 |
| Stages per Counter | 4 |
| Counting Sequence | 0000 to 9999 per counter |
| Logic Family | CMOS |
| Clock Edge | Positive-going or negative-going transition |
| 動作温度範囲 | -55 °C to +125 °C |
| パッケージ | 16-pin DIP |
| Terminal Count | 16 terminals |
| 実装タイプ | Through-hole |
CD4518BCN 16-pin dip ピン配置ガイド
CD4518BCN (16-pin dip パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: CD4518BCN.
詳細は データシート をご参照ください。
主な用途
CD4518BCN の用途: 6 件s: Industrial Pulse and Event Counting, Digital Display Sequencing, Laboratory Timing Reference, Digital Clock and Timer, Traffic and Access Control Sequencing, Legacy Control-System Maintenance.
Industrial Pulse and Event Counting
The CD4518BCN is well suited to counting mechanical or electronic events because it provides two independent four-stage decimal counters in one 16-pin DIP package. Each channel can count from 0000 through 9999 and can be advanced on the appropriate clock edge. A sensor-conditioned pulse train can drive the clock input, while the enable input provides run, hold, and gating control. The BCD outputs can be read directly by compatible logic, latched for display, or used as decade stages in a longer counter. The DIP format also simplifies insertion and replacement in industrial control equipment where through-hole repairability is valuable.
おすすめ
Digital Display Sequencing
The CD4518BCN can provide decimal timing or sequencing values for a multi-digit display because every four-stage counter represents four BCD digits. Two counters in the same package allow separate decimal positions to be advanced, coordinated, or cascaded when more than four digits are required. The counter outputs can feed display-decoder logic or be captured by a controller for multiplexing. Its 16-pin through-hole package is particularly useful when updating an existing display controller without changing the board footprint or introducing a new surface-mount assembly process.
おすすめ
Laboratory Timing Reference
The two independently clocked decimal counters in the CD4518BCN make it possible to divide an external reference into two related time intervals without using two separate counter packages. One channel can count test events or elapsed units while the other counts a different interval, and separate enable inputs permit each section to be started or stopped. The BCD representation supports readable decade outputs, while reset inputs return the counters to their zero state. Through-hole construction and a 16-pin footprint make the device convenient for prototyping timers, pulse generators, and laboratory timing fixtures.
おすすめ
Digital Clock and Timer
A CD4518BCN can form the decimal counting core of a digital clock by assigning one counter to seconds and another to minutes, or by cascading channels for larger intervals. Each counter advances on a selected clock transition and supports independent enable and reset control, which simplifies test and startup sequencing. The four-digit capacity of each section covers 0000 through 9999 before rollover. A conventional through-hole clock board can therefore retain its existing DIP footprint while the BCD outputs drive decoder, display, or controller stages.
おすすめ
Traffic and Access Control Sequencing
The CD4518BCN can implement duration or event sequencing in access-control and traffic-control systems where decimal count states correspond to operating phases. One counter can track a timed phase while the other records cycles, and reset inputs provide a defined initialization state after each system event. The interchangeable clock and enable inputs allow the logic to be synchronized with a system master clock. A 16-pin DIP package supports legacy through-hole control boards, and the BCD outputs can be compared against preset values to establish timing windows.
おすすめ
Legacy Control-System Maintenance
The CD4518BCN is a practical option for maintaining equipment built around the CD4000 CMOS logic family, particularly boards with a 16-pin through-hole counter footprint. Its dual four-stage BCD architecture consolidates two counting functions while preserving familiar decade outputs and discrete reset, enable, and clock connections. This is useful when repairing older industrial, instrumentation, or appliance controllers without redesigning the surrounding logic. Engineers should verify the original manufacturer, pinout, electrical limits, and availability before installing a cross-manufacturer equivalent.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: CD4518BCN — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | CD4518BN | CD4518B | CD4518BCN | CD4518BCN | MM14518BCN |
|---|---|---|---|---|---|---|
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | onsemi | Fairchild Semiconductor | Motorola |
| Package | 16-pin DIP | 16-pin DIP - same | 16-pin DIP - same | 16-pin DIP - same | 16-pin DIP - same | 16-pin DIP - same |
| Counter Type | BCD up-counter | BCD up-counter | BCD up-counter | BCD up-counter | BCD up-counter | BCD up-counter |
| Number of Counter Elements | 2 | 2 | 2 | 2 | 2 | 2 |
| Stages per Counter | 4 | 4 | 4 | 4 | 4 | 4 |
| Decimal Capacity per Channel | 0000 to 9999 | 0000 to 9999 | 0000 to 9999 | 0000 to 9999 | 0000 to 9999 | 0000 to 9999 |
| Clock Edge Selection | Positive-going or negative-going transition | Positive-going or negative-going transition | Positive-going or negative-going transition | Positive-going or negative-going transition | Positive-going or negative-going transition | Positive-going or negative-going transition |
| Logic Technology | CMOS | CMOS | CMOS | CMOS | CMOS | CMOS |
| Mounting Type | Through-hole | Through-hole | Through-hole | Through-hole | Through-hole | Through-hole |
主な差別化要因
- Two complete decimal counters in one 16-pin package (vs CD4518BE)
- Positive-going or negative-going counting flexibility (vs MM14518BCN)
- Direct continuity with legacy CD4518BCN boards (vs CD4518B)
設計ノート
Do not substitute CD4518BE directly for CD4518BCN on a through-hole PCB. Although the dual BCD counter logic is equivalent, CD4518BE uses a different package variant, so the PCB land pattern, lead spacing, and pin orientation must be changed. Before fitting any alternative, verify that the selected orderable part has 16 DIP pins and confirm the manufacturer pin-description table.
Place the supply-decoupling capacitor close to VDD and GND, and keep the clock, enable, and reset traces short enough to avoid unintended transitions. These signals determine whether the counter advances, holds, or returns to zero. In through-hole designs, route sensitive clock and reset nets away from high-current switching nodes, use a common ground reference, and avoid long parallel traces where coupled noise could create false count events.
The CD4518BCN requires the supply voltage and input levels to remain within the limits published in the manufacturer datasheet. Because this is a CMOS logic IC, unused inputs should be tied to a defined valid logic level rather than left floating. Check every clock and enable transition against the supported voltage range, and ensure power-supply sequencing cannot briefly drive an input outside the device’s absolute maximum conditions.
For cascaded counting, route the first counter’s carry output directly to the second counter’s clock input and confirm that the propagation delay does not violate the intended setup time. Keep the reset paths independent unless simultaneous clearing is required. During PCB layout, follow the package drawing for the exposed board side of each through-hole pin and maintain the orientation marker near pin 1.
コンプライアンス情報
The manufacturer documentation identifies a CMOS logic counter but does not provide explicit RoHS, REACH, lead-free, halogen-free, or conflict-minerals statements for this ordering code. AEC-Q100 is not applicable because the CD4518BCN is not presented as an automotive-qualified device.