Texas Instruments

CD4522BMT - Programmable BCD Counter | Texas Instruments

N.º da peça: CD4522BMT ✓ Ativo
3 V to 18 V Vdss 16-pin SOIC Package
MOQ: 1 |

CD4522BMT Visão geral

Texas Instruments CD4522BMT is a programmable 4-bit BCD divide-by-N counter operating from 3 V to 18 V in a 16-pin SOIC package. It counts downward and provides a decoded zero-detect output for divide-by-N applications. The device is supplied in tape-and-reel packaging for automated manufacturing.

A programmable BCD counter is a sequential logic circuit that counts in binary-coded decimal notation and implements a preset division ratio. It belongs to the CMOS counter and divider hierarchy within digital logic ICs. Unlike a simple binary counter with a fixed division ratio, the CD4522BMT accepts programmable parallel inputs, allowing the count threshold to be adjusted for different timing, sequencing, and frequency-division requirements.

The primary features are a 4-bit programmable decade counter, downward counting, and a decoded zero-state output. Its operating supply range is 3 V to 18 V, supporting both low-voltage and conventional CMOS supply rails. The manufacturer specifies operation from -55 °C to 125 °C. A 16-lead small-outline package enables compact PCB layouts while providing separate clock, reset, parallel load, and count-control connections.

The CD4522BMT uses positive-edge clocking to update the count, allowing an external clock source to control the counter state. The parallel inputs select the divide-by-N threshold when load is asserted. Its zero output is decoded specifically for applications that need to recognize the terminal count, which can simplify trigger generation in timers and programmable dividers. The 3 V minimum supply operation also improves compatibility with modern low-voltage control systems.

Typical uses include programmable timer periods, industrial pulse and frequency dividers, sequence counters, digital timing modules, and sequential test equipment. In a divide-by-N circuit, the counter decrements from its programmed terminal value toward zero, and the decoded zero output provides a repeatable endpoint indication. This makes the device useful where a selectable count interval is needed without implementing an entire counter in programmable logic.

PCB design should provide a defined clock signal and observe the device’s voltage limits. Because the part can operate across a broad 3 V to 18 V range, the supply voltage, input thresholds, output load, and external timing components must be evaluated together. Decoupling and routing should follow the manufacturer’s recommended application circuit, with the clock and control traces kept short to reduce susceptibility to ringing and unwanted transitions.

This product page combines the exact CD4522BMT order information with drop-in-family comparisons, application guidance, pinout location, and design considerations. It is intended to help engineers select the correct package and confirm whether an alternative preserves the 16-pin SOIC footprint and counter function.

Alternativas drop-in para CD4522BMT — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.

Variantes desta série

Modelos da mesma série compatíveis como drop-in com CD4522BMT (mesmo formato e footprint) — diferindo em Logic Family, Operating Temperature Range.

Texas Instruments
Logic Family: CMOS
Operating Temperature Range: -55 °C to +125 °C
Comparar com CD4522BMT →

CD4522BM96G4

✅ Drop-In
📦 SOIC-16
Same 4-bit programmable BCD counter and 3 V to 18 V supply range; order-code attributes differ by 0% in the identified core specifications

📋 Alternativa de referência (fora do catálogo)

CD4522BMTE4

✅ Drop-In
📦 SOIC-16
Same 4-bit programmable BCD counter, 16-pin SOIC footprint, and 3 V to 18 V supply range; order-code attributes differ by 0% in the identified core specifications

📋 Alternativa de referência (fora do catálogo)

CD4522BMT Classificações máximas e características elétricas

Counter Type Programmable BCD divide-by-N counter
Number of Bits 4 bits
Count Direction Down
Number of Elements 1 element
Counting Method Synchronous
Zero-State Output Decoded
Supply Voltage Range 3 V to 18 V
Faixa de temperatura de operação -55 °C to 125 °C
Package Type 16-pin SOIC
Package Code D
Número de pinos 16 pins
Tipo de montagem Surface mount
Shipping Format Tape and reel
Logic Family CD4000 CMOS

Guia de Configuração de Pinos do CD4522BMT d

Configuração de pinos para CD4522BMT (pacote d). Este CI digital inclui GPIO, interfaces de comunicação (UART, SPI, I2C) e pinos de alimentação. Consulte o datasheet do fabricante para funções alternativas dos pinos e opções de configuração. Essencial para projeto de sistemas embarcados e layout de PCB.

Diagrama de pinagem do pacote d para CD4522BMT

Nenhum dado detalhado de pinagem disponível para CD4522BMT.

Consulte a ficha técnica para a configuração completa dos pinos.

Aplicações típicas

CD4522BMT é adequado para 6 aplicaçãos: Programmable Industrial Timer, Pulse Frequency Divider, Digital Sequence Counter, Test and Measurement Trigger, Automotive Sequential Control, Low-Voltage Control Module.

🏭

Programmable Industrial Timer

The CD4522BMT fits programmable industrial timer circuits because it provides a 4-bit programmable BCD terminal count, downward counting, and a decoded zero output. The parallel programming inputs select the required count interval, while the zero output provides a repeatable endpoint indication. With a 3 V to 18 V supply range, the counter can operate beside low-voltage CMOS control logic or conventional higher-voltage CMOS systems. Designers should confirm clock rise and fall times at the selected supply voltage and include a suitable supply bypass capacitor close to the device.

⚡

Pulse Frequency Divider

The CD4522BMT is useful in pulse-frequency divider designs where an externally applied clock must be divided by a programmable ratio. Its downward 4-bit BCD counting sequence and programmable parallel inputs allow the division factor to be selected instead of being fixed by the logic. The decoded zero output can mark the completed count interval. Designers should account for propagation delay from the active clock edge through the count outputs and decoded zero output when setting the maximum supported input frequency.

🔧

Digital Sequence Counter

For digital sequence and step-counting systems, the CD4522BMT offers a compact 4-bit BCD countdown state with programmable terminal values. External circuitry can decode the count outputs to implement repeatable machine sequences, test steps, or event counts. Its -55 °C to 125 °C operating range supports applications across industrial temperature environments. The implementation should establish valid setup and hold timing around the parallel programming inputs and clock according to the manufacturer timing diagrams.

📊

Test and Measurement Trigger

The CD4522BMT can generate a delayed trigger or measurement interval in test equipment by counting a reference clock and asserting its decoded zero output at the programmed endpoint. The counter reduces the need for a general-purpose microcontroller when a simple programmable count interval is sufficient. Engineers should use the zero output as the terminal-count indication, preserve the programmed value through a controlled load cycle, and verify that jitter and propagation delay meet the measurement system’s timing requirements.

🚗

Automotive Sequential Control

The CD4522BMT can support low-complexity sequential control in automotive or transportation systems because it combines programmable BCD counting with a broad 3 V to 18 V operating range. Its 16-pin SOIC package fits compact controller boards while providing enough I/O for parallel count programming and count-state decoding. For vehicle applications, check the exact part’s qualification status and environmental requirements before deployment, and use the manufacturer’s recommended decoupling and input-conditioning practices.

🧩

Low-Voltage Control Module

The CD4522BMT is suitable for compact low-voltage control modules because it operates down to 3 V while retaining programmable BCD counting and decoded terminal-state indication. It can divide a system clock, count operating cycles, or coordinate repetitive control events without requiring a configurable logic device. Keep the clock trace short, provide a clean reset strategy, and ensure that every connected input remains within the selected supply’s valid logic levels to avoid unintended count transitions.

Resumo dos produtos recomendados

CD4522BM96G4 Same-family programmable BCD counter Usado em: Programmable Industrial Timer, Pulse Frequency Divider, Digital Sequence Counter, Test and Measurement Trigger, Automotive Sequential Control, Low-Voltage Control Module CD4522BMTE4 Same-family programmable BCD counter Usado em: Programmable Industrial Timer, Pulse Frequency Divider, Digital Sequence Counter, Test and Measurement Trigger, Automotive Sequential Control, Low-Voltage Control Module
What is the CD4522BMT?
The CD4522BMT is a Texas Instruments programmable 4-bit BCD divide-by-N counter in a 16-pin SOIC package. According to the manufacturer datasheet, it supports supply voltages from 3 V to 18 V, counts downward synchronously, accepts programmable parallel inputs, and provides a decoded zero-state output for divide-by-N applications.
What is the operating voltage of CD4522BMT?
The CD4522BMT operates from 3 V to 18 V. The Texas Instruments CD4522B datasheet identifies this range as suitable for conventional CMOS control logic while allowing operation from a 3 V supply. Designers should also confirm the clock amplitude and input thresholds at the selected supply voltage before treating the circuit as a fully compatible replacement for another CD4000-series counter.
Where can I download the CD4522BMT datasheet PDF?
The CD4522BMT datasheet is available through the Texas Instruments CD4522B product page at https://www.ti.com/product/CD4522B. Use the manufacturer datasheet for the complete pin-description table, electrical characteristics, truth tables, timing diagrams, and recommended application circuit. The manufacturer page also links the exact CD4522BMT part-details entry and related CD4522B package variants.
Where is the CD4522BMT pinout?
The CD4522BMT pinout is documented in the pin-configuration section of the Texas Instruments CD4522B datasheet. The device uses a 16-lead SOIC package, and its external connections include the parallel programming inputs, clock, reset, load control, count output, and decoded zero output. Use the datasheet pin table when assigning PCB nets and checking counter-control polarity.
How does the CD4522BMT count?
The CD4522BMT performs synchronous downward counting in 4-bit BCD format. According to the manufacturer datasheet, its parallel inputs establish the programmable divide-by-N value, and the decoded zero output indicates the terminal count. This behavior makes it suitable for selectable timer periods, pulse division, and sequential counting systems.
What is the difference between CD4522BMT and CD4522BMTE4?
Both are Texas Instruments CD4522B-family devices with a 4-bit programmable BCD counter, 3 V to 18 V operation, and a 16-pin SOIC footprint. Their orderable suffix codes identify different catalog configurations, so engineers should confirm the manufacturer part-details table for packaging and qualification attributes before substitution. Both remain pin-compatible at the functional SOIC-16 level.
Can CD4522BM96G4 replace CD4522BMT?
The CD4522BM96G4 is a Texas Instruments CD4522B-family 16-pin SOIC counter and is a functional drop-in candidate for CD4522BMT. The manufacturer product family uses the same 4-bit programmable BCD counter architecture, downward counting, and decoded zero output. Final qualification should still be checked against the specific manufacturer part-details pages for temperature grade, packing, and ordering codes.
What can replace CD4522BMT?
The verified replacements for CD4522BMT are CD4522BM96G4 and CD4522BMTE4, both manufactured by Texas Instruments in the same 16-pin SOIC family. They retain the programmable 4-bit BCD divide-by-N function and downward counting behavior. No cross-manufacturer pin-compatible replacement was identified, so no alternative should be selected without checking its complete pin configuration and electrical limits.
Is CD4522BMT suitable for industrial timer and divider circuits?
The CD4522BMT is suitable for industrial timer and divider circuits when the surrounding design respects its 3 V to 18 V supply range and -55 °C to 125 °C operating range. Its programmable terminal count, decoded zero output, and 4-bit BCD operation support adjustable timing intervals. Use appropriate decoupling and verify timing margins at the highest expected clock frequency.
When should I choose CD4522BMT over CD4522BM96G4?
Choose CD4522BMT when its exact tape-and-reel order configuration matches the BOM and production requirements. Choose CD4522BM96G4 when that orderable member of the CD4522B family satisfies the required package and qualification details. The functional counter architecture is closely related, so the decision should focus on exact ordering attributes rather than a change in counter capability.
Where can I buy CD4522BMT online?
Use the Request a Quote form on this page to request CD4522BMT availability, current commercial terms, and a lead-time quotation. The exact part is identified as a Texas Instruments 16-pin SOIC device supplied in tape-and-reel format. Providing the target quantity allows the request to reflect the required production quantity and packaging configuration.
What is the price of CD4522BMT?
Use the Request a Quote form on this page for the current CD4522BMT unit and volume pricing. Commercial terms can vary with quantity, inventory, and packaging, so the pricing panel should be used rather than a static price statement. Request a quote for the exact Texas Instruments MPN CD4522BMT to avoid confusion with other CD4522B package or order codes.
What is the lead time for CD4522BMT?
The current lead time for CD4522BMT should be requested through the Request a Quote form on this page. A distributor result identifies the device as buyable, but it does not state a guaranteed production lead time for the requested quantity. The quotation request can account for the exact tape-and-reel configuration and current inventory position.
Is CD4522BMT in stock?
CD4522BMT is listed as available for ordering by the manufacturer’s authorized distribution channel, but the quantity required should be confirmed through the Request a Quote form on this page. Availability can change by order code and quantity, so a product-level listing does not guarantee allocation for a specific production run.
What are the key specifications of CD4522BMT that engineers should know?
The CD4522BMT combines a 4-bit programmable BCD divide-by-N counter, downward synchronous counting, a decoded zero output, and a 3 V to 18 V supply range in a 16-pin SOIC package. The Texas Instruments datasheet also specifies operation from -55 °C to 125 °C. These characteristics make it most relevant to programmable timers, pulse dividers, sequence counters, and industrial timing modules.

Dados de referência de engenharia para CD4522BMT — comparação, orientação de projeto e informações de conformidade.

Guia de seleção

Choose CD4522BMT when the design requires a Texas Instruments 4-bit programmable BCD divide-by-N counter in a 16-pin SOIC tape-and-reel configuration. It is appropriate for programmable timers, pulse dividers, sequence counters, and trigger-generation circuits operating from 3 V to 18 V. CD4522BM96G4 and CD4522BMTE4 are functional drop-in family options with the same identified counter architecture, supply range, and SOIC-16 footprint. Select one of those orderable members instead when its exact packaging, qualification, or catalog attributes better match the production BOM. Confirm clock and programming timing at the intended voltage, respect the 3 V maximum supply constraint, and verify the complete manufacturer pin table before PCB release. Because no cross-manufacturer pin-compatible alternative was identified, do not assume an equivalent 4522 counter can replace the device without a detailed footprint and logic-level review.

Comparação com alternativas

Parâmetro Este produto CD4522BM96G4 CD4522BMTE4
Package SOIC-16 SOIC-16 SOIC-16
Brand Texas Instruments Texas Instruments Texas Instruments
Counter Type Programmable BCD divide-by-N counter Programmable BCD divide-by-N counter Programmable BCD divide-by-N counter
Number of Bits 4 bits 4 bits 4 bits
Count Direction Down Down Down
Counting Method Synchronous Synchronous Synchronous
Supply Voltage Range 3 V to 18 V 3 V to 18 V 3 V to 18 V
Operating Temperature Range -55 °C to 125 °C -55 °C to 125 °C -55 °C to 125 °C
Zero-State Output Decoded Decoded Decoded

Principais diferenciais

  • Exact tape-and-reel order configuration (vs CD4522BM96G4)
  • Identical core counter ratings (vs CD4522BMTE4)
  • Broad supply compatibility (vs CD4522BM96G4)

Notas de projeto

Route the clock to the CD4522BMT as a short, continuous trace and keep it away from the parallel programming inputs where practical. CMOS counters can respond to unintended edges, so a clean clock source and controlled reset release are essential. Check clock rise and fall times, setup time, hold time, and propagation delay in the manufacturer timing diagrams for the operating voltage and temperature used in the design.

Place the supply bypass capacitor close to the device’s supply and ground connections, and use a ground plane that provides a low-impedance return for switching current. The 16-pin SOIC footprint leaves little room for long loops, so inspect the assembled board for solder bridges on closely spaced pins. Confirm the exposed package dimensions and lead geometry against the current manufacturer drawing before releasing the PCB artwork.

Do not treat every CD4522B suffix as electrically and commercially interchangeable without checking the exact orderable part. CD4522BMT, CD4522BM96G4, and CD4522BMTE4 share the 16-pin SOIC counter family, but order-code, packing, and qualification attributes must still be matched to the system requirements. Also avoid changing the programmed count value while the clock is active unless the circuit’s timing design explicitly supports asynchronous loading.

Informações de conformidade

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Sem chumbo
Unknown
Sem halogênios
Unknown
Minerais de conflito
Unknown

Compliance attributes are not stated in the identified manufacturer and distributor pages. Qualification status should be confirmed for the exact orderable MPN before use in regulated or automotive designs.

Dados verificados em: 2026-11-15 — dados verificados e curados pela equipe de engenharia de componentes da XAIPART

Buscas relacionadas

CD4522BMT datasheet CD4522BMT pinout CD4522BMT datasheet pdf CD4522BMT equivalent CD4522BMT replacement CD4522BMT cross reference CD4522BMT price CD4522BMT stock Texas Instruments CD4522BMT CD4522BMT vs CD4522BMTE4 CD4522BMT SOIC-16 footprint CD4522BMT programmable timer

Componentes & termos relacionados

Texas Instruments CD4522BMT CD4522BM96G4 CD4522BMTE4 CD4522B programmable BCD counter divide-by-N counter CMOS counter digital logic IC logic counter and divider synchronous counter down counter decoded zero-state output 3 V to 18 V supply SOIC-16 QFN family surface mount SMD package programmable timer pulse frequency divider sequence counter industrial control test and measurement low-voltage control module terminal count
RFQ de cotação rápida
Preencha todos os detalhes — nossa equipe de vendas responderá em até 24 horas
Part number Fabricante Encapsulamento QTY Preço-alvo Total
✓
Cotação enviada!

Responderemos seu e-mail em até 24 horas

1
RFQ enviada
2
Cotação recebida
3
Pedido realizado
4
Pagamento
5
Enviado
6
Entregue
Ver detalhes da RFQ