CD4522BMT - Programmable BCD Counter | Texas Instruments
Référence : CD4522BMT ✓ ActifCD4522BMT Présentation
A programmable BCD counter is a sequential logic circuit that counts in binary-coded decimal notation and implements a preset division ratio. It belongs to the CMOS counter and divider hierarchy within digital logic ICs. Unlike a simple binary counter with a fixed division ratio, the CD4522BMT accepts programmable parallel inputs, allowing the count threshold to be adjusted for different timing, sequencing, and frequency-division requirements.
The primary features are a 4-bit programmable decade counter, downward counting, and a decoded zero-state output. Its operating supply range is 3 V to 18 V, supporting both low-voltage and conventional CMOS supply rails. The manufacturer specifies operation from -55 °C to 125 °C. A 16-lead small-outline package enables compact PCB layouts while providing separate clock, reset, parallel load, and count-control connections.
The CD4522BMT uses positive-edge clocking to update the count, allowing an external clock source to control the counter state. The parallel inputs select the divide-by-N threshold when load is asserted. Its zero output is decoded specifically for applications that need to recognize the terminal count, which can simplify trigger generation in timers and programmable dividers. The 3 V minimum supply operation also improves compatibility with modern low-voltage control systems.
Typical uses include programmable timer periods, industrial pulse and frequency dividers, sequence counters, digital timing modules, and sequential test equipment. In a divide-by-N circuit, the counter decrements from its programmed terminal value toward zero, and the decoded zero output provides a repeatable endpoint indication. This makes the device useful where a selectable count interval is needed without implementing an entire counter in programmable logic.
PCB design should provide a defined clock signal and observe the device’s voltage limits. Because the part can operate across a broad 3 V to 18 V range, the supply voltage, input thresholds, output load, and external timing components must be evaluated together. Decoupling and routing should follow the manufacturer’s recommended application circuit, with the clock and control traces kept short to reduce susceptibility to ringing and unwanted transitions.
This product page combines the exact CD4522BMT order information with drop-in-family comparisons, application guidance, pinout location, and design considerations. It is intended to help engineers select the correct package and confirm whether an alternative preserves the 16-pin SOIC footprint and counter function.
Alternatives de remplacement direct pour CD4522BMT — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec CD4522BMT (même facteur de forme et même empreinte) — différant par Logic Family, Operating Temperature Range.
CD4522BM96G4
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
CD4522BMTE4
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
CD4522BMT Valeurs maximales et caractéristiques électriques
| Counter Type | Programmable BCD divide-by-N counter |
| Number of Bits | 4 bits |
| Count Direction | Down |
| Number of Elements | 1 element |
| Counting Method | Synchronous |
| Zero-State Output | Decoded |
| Supply Voltage Range | 3 V to 18 V |
| Plage de température de fonctionnement | -55 °C to 125 °C |
| Package Type | 16-pin SOIC |
| Package Code | D |
| Nombre de broches | 16 pins |
| Type de montage | Surface mount |
| Shipping Format | Tape and reel |
| Logic Family | CD4000 CMOS |
Guide de configuration des broches du CD4522BMT d
Configuration des broches du CD4522BMT (boîtier d). Ce circuit intégré numérique comprend des GPIO, des interfaces de communication (UART, SPI, I2C) et des broches d'alimentation. Consultez la fiche technique du fabricant pour les fonctions alternatives des broches et les options de configuration. Indispensable pour la conception de systèmes embarqués et la conception de circuits imprimés.
Aucune donnée de brochage détaillée disponible pour CD4522BMT.
Consultez la fiche technique pour la configuration complète des broches.
Applications typiques
CD4522BMT convient pour 6 applications: Programmable Industrial Timer, Pulse Frequency Divider, Digital Sequence Counter, Test and Measurement Trigger, Automotive Sequential Control, Low-Voltage Control Module.
Programmable Industrial Timer
The CD4522BMT fits programmable industrial timer circuits because it provides a 4-bit programmable BCD terminal count, downward counting, and a decoded zero output. The parallel programming inputs select the required count interval, while the zero output provides a repeatable endpoint indication. With a 3 V to 18 V supply range, the counter can operate beside low-voltage CMOS control logic or conventional higher-voltage CMOS systems. Designers should confirm clock rise and fall times at the selected supply voltage and include a suitable supply bypass capacitor close to the device.
Recommandé
Pulse Frequency Divider
The CD4522BMT is useful in pulse-frequency divider designs where an externally applied clock must be divided by a programmable ratio. Its downward 4-bit BCD counting sequence and programmable parallel inputs allow the division factor to be selected instead of being fixed by the logic. The decoded zero output can mark the completed count interval. Designers should account for propagation delay from the active clock edge through the count outputs and decoded zero output when setting the maximum supported input frequency.
Recommandé
Digital Sequence Counter
For digital sequence and step-counting systems, the CD4522BMT offers a compact 4-bit BCD countdown state with programmable terminal values. External circuitry can decode the count outputs to implement repeatable machine sequences, test steps, or event counts. Its -55 °C to 125 °C operating range supports applications across industrial temperature environments. The implementation should establish valid setup and hold timing around the parallel programming inputs and clock according to the manufacturer timing diagrams.
Recommandé
Test and Measurement Trigger
The CD4522BMT can generate a delayed trigger or measurement interval in test equipment by counting a reference clock and asserting its decoded zero output at the programmed endpoint. The counter reduces the need for a general-purpose microcontroller when a simple programmable count interval is sufficient. Engineers should use the zero output as the terminal-count indication, preserve the programmed value through a controlled load cycle, and verify that jitter and propagation delay meet the measurement system’s timing requirements.
Recommandé
Automotive Sequential Control
The CD4522BMT can support low-complexity sequential control in automotive or transportation systems because it combines programmable BCD counting with a broad 3 V to 18 V operating range. Its 16-pin SOIC package fits compact controller boards while providing enough I/O for parallel count programming and count-state decoding. For vehicle applications, check the exact part’s qualification status and environmental requirements before deployment, and use the manufacturer’s recommended decoupling and input-conditioning practices.
Recommandé
Low-Voltage Control Module
The CD4522BMT is suitable for compact low-voltage control modules because it operates down to 3 V while retaining programmable BCD counting and decoded terminal-state indication. It can divide a system clock, count operating cycles, or coordinate repetitive control events without requiring a configurable logic device. Keep the clock trace short, provide a clean reset strategy, and ensure that every connected input remains within the selected supply’s valid logic levels to avoid unintended count transitions.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour CD4522BMT — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | CD4522BM96G4 | CD4522BMTE4 |
|---|---|---|---|
| Package | SOIC-16 | SOIC-16 | SOIC-16 |
| Brand | Texas Instruments | Texas Instruments | Texas Instruments |
| Counter Type | Programmable BCD divide-by-N counter | Programmable BCD divide-by-N counter | Programmable BCD divide-by-N counter |
| Number of Bits | 4 bits | 4 bits | 4 bits |
| Count Direction | Down | Down | Down |
| Counting Method | Synchronous | Synchronous | Synchronous |
| Supply Voltage Range | 3 V to 18 V | 3 V to 18 V | 3 V to 18 V |
| Operating Temperature Range | -55 °C to 125 °C | -55 °C to 125 °C | -55 °C to 125 °C |
| Zero-State Output | Decoded | Decoded | Decoded |
Principaux différenciateurs
- Exact tape-and-reel order configuration (vs CD4522BM96G4)
- Identical core counter ratings (vs CD4522BMTE4)
- Broad supply compatibility (vs CD4522BM96G4)
Notes de conception
Route the clock to the CD4522BMT as a short, continuous trace and keep it away from the parallel programming inputs where practical. CMOS counters can respond to unintended edges, so a clean clock source and controlled reset release are essential. Check clock rise and fall times, setup time, hold time, and propagation delay in the manufacturer timing diagrams for the operating voltage and temperature used in the design.
Place the supply bypass capacitor close to the device’s supply and ground connections, and use a ground plane that provides a low-impedance return for switching current. The 16-pin SOIC footprint leaves little room for long loops, so inspect the assembled board for solder bridges on closely spaced pins. Confirm the exposed package dimensions and lead geometry against the current manufacturer drawing before releasing the PCB artwork.
Do not treat every CD4522B suffix as electrically and commercially interchangeable without checking the exact orderable part. CD4522BMT, CD4522BM96G4, and CD4522BMTE4 share the 16-pin SOIC counter family, but order-code, packing, and qualification attributes must still be matched to the system requirements. Also avoid changing the programmed count value while the clock is active unless the circuit’s timing design explicitly supports asynchronous loading.
Informations de conformité
Compliance attributes are not stated in the identified manufacturer and distributor pages. Qualification status should be confirmed for the exact orderable MPN before use in regulated or automotive designs.