CD4522BMT - Programmable BCD Counter | Texas Instruments
MPN: CD4522BMT ✓ 啟用中CD4522BMT 概覽
A programmable BCD counter is a sequential logic circuit that counts in binary-coded decimal notation and implements a preset division ratio. It belongs to the CMOS counter and divider hierarchy within digital logic ICs. Unlike a simple binary counter with a fixed division ratio, the CD4522BMT accepts programmable parallel inputs, allowing the count threshold to be adjusted for different timing, sequencing, and frequency-division requirements.
The primary features are a 4-bit programmable decade counter, downward counting, and a decoded zero-state output. Its operating supply range is 3 V to 18 V, supporting both low-voltage and conventional CMOS supply rails. The manufacturer specifies operation from -55 °C to 125 °C. A 16-lead small-outline package enables compact PCB layouts while providing separate clock, reset, parallel load, and count-control connections.
The CD4522BMT uses positive-edge clocking to update the count, allowing an external clock source to control the counter state. The parallel inputs select the divide-by-N threshold when load is asserted. Its zero output is decoded specifically for applications that need to recognize the terminal count, which can simplify trigger generation in timers and programmable dividers. The 3 V minimum supply operation also improves compatibility with modern low-voltage control systems.
Typical uses include programmable timer periods, industrial pulse and frequency dividers, sequence counters, digital timing modules, and sequential test equipment. In a divide-by-N circuit, the counter decrements from its programmed terminal value toward zero, and the decoded zero output provides a repeatable endpoint indication. This makes the device useful where a selectable count interval is needed without implementing an entire counter in programmable logic.
PCB design should provide a defined clock signal and observe the device’s voltage limits. Because the part can operate across a broad 3 V to 18 V range, the supply voltage, input thresholds, output load, and external timing components must be evaluated together. Decoupling and routing should follow the manufacturer’s recommended application circuit, with the clock and control traces kept short to reduce susceptibility to ringing and unwanted transitions.
This product page combines the exact CD4522BMT order information with drop-in-family comparisons, application guidance, pinout location, and design considerations. It is intended to help engineers select the correct package and confirm whether an alternative preserves the 16-pin SOIC footprint and counter function.
直接替換替代品,適用於 CD4522BMT — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: CD4522BMT (相同外形與佔位) — 差異在於 Logic Family, Operating Temperature Range.
CD4522BM96G4
✅ 直接替換📋 參考替代品(不在目錄中)
CD4522BMTE4
✅ 直接替換📋 參考替代品(不在目錄中)
CD4522BMT 最大額定值與電氣特性
| Counter Type | Programmable BCD divide-by-N counter |
| Number of Bits | 4 bits |
| Count Direction | Down |
| Number of Elements | 1 element |
| Counting Method | Synchronous |
| Zero-State Output | Decoded |
| Supply Voltage Range | 3 V to 18 V |
| 工作溫度範圍 | -55 °C to 125 °C |
| Package Type | 16-pin SOIC |
| Package Code | D |
| 腳位數 | 16 pins |
| 安裝類型 | Surface mount |
| Shipping Format | Tape and reel |
| Logic Family | CD4000 CMOS |
CD4522BMT d 腳位配置指南
CD4522BMT(d 封裝)的腳位配置。 此數位 IC 包含 GPIO、通訊介面(UART、SPI、I2C)與電源腳位。替代腳位功能與配置選項請參閱製造商資料表。對嵌入式系統設計與 PCB 佈局至關重要。
無詳細腳位定義資料: CD4522BMT.
請參閱 資料表 以查看完整腳位配置。
典型應用
CD4522BMT 適用於 6 應用s: Programmable Industrial Timer, Pulse Frequency Divider, Digital Sequence Counter, Test and Measurement Trigger, Automotive Sequential Control, Low-Voltage Control Module.
Programmable Industrial Timer
The CD4522BMT fits programmable industrial timer circuits because it provides a 4-bit programmable BCD terminal count, downward counting, and a decoded zero output. The parallel programming inputs select the required count interval, while the zero output provides a repeatable endpoint indication. With a 3 V to 18 V supply range, the counter can operate beside low-voltage CMOS control logic or conventional higher-voltage CMOS systems. Designers should confirm clock rise and fall times at the selected supply voltage and include a suitable supply bypass capacitor close to the device.
推薦
Pulse Frequency Divider
The CD4522BMT is useful in pulse-frequency divider designs where an externally applied clock must be divided by a programmable ratio. Its downward 4-bit BCD counting sequence and programmable parallel inputs allow the division factor to be selected instead of being fixed by the logic. The decoded zero output can mark the completed count interval. Designers should account for propagation delay from the active clock edge through the count outputs and decoded zero output when setting the maximum supported input frequency.
推薦
Digital Sequence Counter
For digital sequence and step-counting systems, the CD4522BMT offers a compact 4-bit BCD countdown state with programmable terminal values. External circuitry can decode the count outputs to implement repeatable machine sequences, test steps, or event counts. Its -55 °C to 125 °C operating range supports applications across industrial temperature environments. The implementation should establish valid setup and hold timing around the parallel programming inputs and clock according to the manufacturer timing diagrams.
推薦
Test and Measurement Trigger
The CD4522BMT can generate a delayed trigger or measurement interval in test equipment by counting a reference clock and asserting its decoded zero output at the programmed endpoint. The counter reduces the need for a general-purpose microcontroller when a simple programmable count interval is sufficient. Engineers should use the zero output as the terminal-count indication, preserve the programmed value through a controlled load cycle, and verify that jitter and propagation delay meet the measurement system’s timing requirements.
推薦
Automotive Sequential Control
The CD4522BMT can support low-complexity sequential control in automotive or transportation systems because it combines programmable BCD counting with a broad 3 V to 18 V operating range. Its 16-pin SOIC package fits compact controller boards while providing enough I/O for parallel count programming and count-state decoding. For vehicle applications, check the exact part’s qualification status and environmental requirements before deployment, and use the manufacturer’s recommended decoupling and input-conditioning practices.
推薦
Low-Voltage Control Module
The CD4522BMT is suitable for compact low-voltage control modules because it operates down to 3 V while retaining programmable BCD counting and decoded terminal-state indication. It can divide a system clock, count operating cycles, or coordinate repetitive control events without requiring a configurable logic device. Keep the clock trace short, provide a clean reset strategy, and ensure that every connected input remains within the selected supply’s valid logic levels to avoid unintended count transitions.
推薦
推薦產品摘要
工程參考資料,適用於 CD4522BMT — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | CD4522BM96G4 | CD4522BMTE4 |
|---|---|---|---|
| Package | SOIC-16 | SOIC-16 | SOIC-16 |
| Brand | Texas Instruments | Texas Instruments | Texas Instruments |
| Counter Type | Programmable BCD divide-by-N counter | Programmable BCD divide-by-N counter | Programmable BCD divide-by-N counter |
| Number of Bits | 4 bits | 4 bits | 4 bits |
| Count Direction | Down | Down | Down |
| Counting Method | Synchronous | Synchronous | Synchronous |
| Supply Voltage Range | 3 V to 18 V | 3 V to 18 V | 3 V to 18 V |
| Operating Temperature Range | -55 °C to 125 °C | -55 °C to 125 °C | -55 °C to 125 °C |
| Zero-State Output | Decoded | Decoded | Decoded |
主要差異化特點
- Exact tape-and-reel order configuration (對比CD4522BM96G4)
- Identical core counter ratings (對比CD4522BMTE4)
- Broad supply compatibility (對比CD4522BM96G4)
設計說明
Route the clock to the CD4522BMT as a short, continuous trace and keep it away from the parallel programming inputs where practical. CMOS counters can respond to unintended edges, so a clean clock source and controlled reset release are essential. Check clock rise and fall times, setup time, hold time, and propagation delay in the manufacturer timing diagrams for the operating voltage and temperature used in the design.
Place the supply bypass capacitor close to the device’s supply and ground connections, and use a ground plane that provides a low-impedance return for switching current. The 16-pin SOIC footprint leaves little room for long loops, so inspect the assembled board for solder bridges on closely spaced pins. Confirm the exposed package dimensions and lead geometry against the current manufacturer drawing before releasing the PCB artwork.
Do not treat every CD4522B suffix as electrically and commercially interchangeable without checking the exact orderable part. CD4522BMT, CD4522BM96G4, and CD4522BMTE4 share the 16-pin SOIC counter family, but order-code, packing, and qualification attributes must still be matched to the system requirements. Also avoid changing the programmed count value while the clock is active unless the circuit’s timing design explicitly supports asynchronous loading.
合規資訊
Compliance attributes are not stated in the identified manufacturer and distributor pages. Qualification status should be confirmed for the exact orderable MPN before use in regulated or automotive designs.