CS4341-KSZ 24-Bit 96kHz Stereo DAC | Cirrus Logic
N.º da peça: CS4341-KSZ ✓ AtivoCS4341-KSZ Visão geral
An audio DAC converts digital PCM audio samples into continuous analog voltage signals suitable for headphone, line-level, or downstream amplification stages. The CS4341-KSZ is a stereo converter, allowing left and right digital audio channels to be processed simultaneously. Its 24-bit resolution supports high-fidelity digital audio reproduction, while the 96 kHz maximum sample rate covers common CD-rate and related embedded audio formats.
Key features include a 24-bit conversion format, a 96 kHz sampling-rate capability, a serial peripheral interface for digital audio data and control, and a 101 dB signal-to-noise ratio. The SOIC-16 package supports conventional PCB assembly and is compatible with compact analog and digital layouts. The CS4341 family is also identified as a complete stereo digital-to-analog system incorporating digital interpolation and delta-sigma conversion functions.
The CS4341-KSZ is positioned for applications where a single IC provides a complete stereo DAC rather than requiring separate interpolation, conversion, and output-filtering stages. It can be used in audio receivers, portable media equipment, digital audio players, USB or embedded audio interfaces, and active speaker designs. The exact digital format, clocking details, analog output topology, and recommended external components should be confirmed in the manufacturer datasheet for the specific board implementation.
A practical layout should separate digital interface routing from the analog output network, maintain short return paths, and place input and output capacitors according to the datasheet reference circuit. The SPI interface requires a suitable digital clock source and control firmware or logic. In systems with long digital traces or switching converters, careful grounding and filtering are important because they can affect the full-scale analog output and system noise floor.
This product page combines the verified CS4341-KSZ ordering information, package and interface characteristics, application guidance, pin-compatible candidate review, and engineering notes intended to accelerate design evaluation and sourcing.
Alternativas drop-in para CS4341-KSZ — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Variantes desta série
Modelos da mesma série compatíveis como drop-in com CS4341-KSZ (mesmo formato e footprint) — diferindo em Digital De-emphasis, Digital Interpolation, Operating Temperature.
CS4341-KS
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
CS4341A-KSZ
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
CS4340-KSZ
✅ Drop-InConsulte o preço
Ver ficha técnica →CS4341-KS-ES
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
CS4341-KSZ Classificações máximas e características elétricas
| Product Type | Stereo audio digital-to-analog converter |
| Resolução | 24 bit |
| Maximum Sample Rate | 96 kHz |
| Signal-to-Noise Ratio | 101 dB |
| Digital Interface | SPI |
| Channel Configuration | Stereo |
| Package Type | 16-pin SOIC |
| Package Family | SOIC-16 |
| Tipo de montagem | Surface mount |
| Screening Level | Industrial |
| Temperatura de operação | -40°C to +85°C |
| Digital Interpolation | Included |
| DAC Architecture | Fourth-order delta-sigma |
| Digital De-emphasis | Included |
| Analog Filtering | Switched-capacitor |
Guia de Configuração de Pinos do CS4341-KSZ soic-16
Configuração de pinos para CS4341-KSZ (pacote soic-16). Este componente analógico possui pinos de entrada, saída e alimentação. Consulte o datasheet do fabricante para configurações de offset null, compensação e pino de enable. Ideal para circuitos de condicionamento de sinal e amplificadores.
Nenhum dado detalhado de pinagem disponível para CS4341-KSZ.
Consulte a ficha técnica para a configuração completa dos pinos.
Aplicações típicas
CS4341-KSZ é adequado para 6 aplicaçãos: Compact Digital Audio Player, USB Audio Interface, Network Audio Receiver, Active Speaker, Digital Audio Interface Module, Industrial Audio Control Panel.
Compact Digital Audio Player
The CS4341-KSZ fits a compact digital audio player because it combines a 24-bit stereo DAC, operation up to 96 kHz, and an SPI interface in a 16-pin SOIC package. The converter can receive digital audio from a host processor and provide left and right analog outputs for an amplifier or headphone stage. Its 101 dB signal-to-noise ratio supports high-fidelity reproduction, while the small package simplifies board partitioning. Use the datasheet clocking and filter network, and verify that the selected host controller supports the required serial format and timing.
Recomendado
USB Audio Interface
The CS4341-KSZ is suitable for a USB audio interface that must translate digital playback data into stereo analog signals. Its 24-bit resolution and 96 kHz maximum sample rate cover standard high-resolution playback requirements, while the 101 dB signal-to-noise ratio helps preserve quiet passages. The SPI interface allows an embedded controller or USB audio processor to deliver channel data and configure the converter. Keep the digital section isolated from the analog outputs, and use the manufacturer reference circuit for decoupling, clocking, and output filtering.
Recomendado
Network Audio Receiver
A network audio receiver can use the CS4341-KSZ to convert decoded stereo PCM data into an analog output for downstream amplification. The converter's 24-bit format and 96 kHz sample-rate support align with common network-audio playback rates, and the 101 dB ratio supports low-noise output. The SPI connection can bridge from a network-audio decoder or digital audio processor. Designers should prioritize a low-jitter clock source, a quiet analog supply, and a ground layout that minimizes coupling from Ethernet, memory, and switching circuitry.
Recomendado
Active Speaker
The CS4341-KSZ can provide the stereo conversion stage in an active speaker or powered speaker controller. A digital signal processor or audio source can send PCM data through the SPI interface, and the DAC outputs can feed a line-level amplifier. The 101 dB signal-to-noise ratio is relevant because it helps prevent the converter from degrading the noise floor of the amplified output. The 16-pin SOIC package is practical for compact speaker electronics, but the final system still needs correct analog filtering, gain scaling, and protection against output transients.
Recomendado
Digital Audio Interface Module
The CS4341-KSZ is appropriate for a compact digital-to-audio module where a processor needs an integrated stereo DAC rather than external converter components. Its SPI control path supports integration with embedded audio firmware, and its 24-bit, 96 kHz capability provides a clear performance target for high-fidelity conversion. The 16-SOIC footprint allows the converter, clock source, and output network to occupy a small board area. Confirm the input word length, clocking mode, and supported sample rates in the datasheet before finalizing the module interface.
Recomendado
Industrial Audio Control Panel
The CS4341-KSZ can serve as the stereo playback converter in an industrial control panel that includes audible prompts, status tones, or locally stored audio. Its 101 dB signal-to-noise ratio improves the signal quality of low-level digital recordings, while the 24-bit resolution and 96 kHz support provide headroom for modern audio assets. The industrial-screening designation associated with the CS4341 family is relevant for extended-temperature equipment. Designers should assess electromagnetic coupling from relays, displays, and switching supplies, and preserve a quiet analog output region.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para CS4341-KSZ — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | CS4341-KS | CS4341A-KSZ | CS4340-KSZ | CS4341-KS-ES |
|---|---|---|---|---|---|
| Brand | Cirrus Logic | Cirrus Logic | Cirrus Logic | Cirrus Logic | Cirrus Logic |
| Package | 16-SOIC | 16-SOIC | 16-SOIC | 16-SOIC | 16-SOIC |
| Device Type | Stereo audio DAC | Stereo DAC | Stereo DAC | Stereo DAC | Stereo DAC |
| Channel Count | Stereo | Stereo | Stereo | Stereo | Stereo |
Principais diferenciais
- Supports 96 kHz stereo playback in a compact 16-SOIC package (vs CS4341A-KSZ)
- Provides a documented 101 dB signal-to-noise ratio (vs CS4340-KSZ)
- Uses a 24-bit SPI stereo conversion format (vs CS4341-KS-ES)
Notas de projeto
Place the CS4341-KSZ power and ground connections close to their associated pins, and route the SPI signals away from the analog outputs. Keep the analog-output region compact and use a continuous ground reference beneath the converter and output-filter components. The available family information identifies switched-capacitor analog filtering, so separating digital return paths from the analog section can reduce injected noise and channel-to-channel disturbance.
Design the SPI interface around the datasheet timing and clock requirements, using short traces and appropriate source termination when the host controller and converter are physically separated. Pay particular attention to master-clock jitter because it can affect the conversion interface even when the converter's nominal resolution is 24 bit. Validate the complete clock, data, and control network with an oscilloscope before finalizing the PCB.
Do not substitute CS4341A-KSZ solely because both use a 16-SOIC package and SPI interface. The listed maximum sample rate is 192 kHz for CS4341A-KSZ versus 96 kHz for CS4341-KSZ, and the higher rate does not establish identical pin behavior, filtering, output scaling, or control semantics. Check the manufacturer pin table, recommended application circuit, and digital-audio timing before approving a replacement.
Follow the manufacturer-recommended decoupling arrangement and separate analog and digital supply paths as closely as the package and application circuit allow. Avoid routing switching-supply return current beneath the DAC's analog ground and output nodes. For systems with a shared supply, use the datasheet's recommended filtering and grounding topology rather than adding arbitrary extra capacitance that can alter startup or stability behavior.
Informações de conformidade
The verified product summaries identify industrial screening and the -SZ ordering code but do not state RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status.