Cirrus Logic Inc.

CS5366-DQZ - 6-Channel 24-Bit 192kHz Audio ADC | Cirrus Logic

N.º da peça: CS5366-DQZ ✗ Fim de vida
48-LQFP, 7 mm x 7 mm Package
MOQ: 1 |

CS5366-DQZ Visão geral

The Cirrus Logic CS5366-DQZ is a six-channel, 24-bit audio analog-to-digital converter with a maximum sampling rate of 192 kHz per channel and a 48-LQFP surface-mount package measuring 7 mm by 7 mm. According to the manufacturer data sheet, it provides a dynamic range of 114 dB and supports serial TDM output for professional digital audio systems.

An audio ADC is a data-conversion IC that samples an analog audio waveform and converts it into a digital representation. It belongs to the ADC and DAC category, then to the broader signal-conversion and integrated-circuit hierarchy. In a digital audio signal chain, an ADC follows the microphone preamplifier, mixer, or line-level conditioning circuit. Its principal design goals are accurate amplitude conversion, low distortion, high dynamic range, and a digital interface that transfers multiple channels reliably to a codec, DSP, or audio processor.

The CS5366 integrates six simultaneous audio channels, analog-to-digital conversion, and anti-alias filtering. Its 24-bit conversion resolution supports high-fidelity recording and playback architectures, while the 192 kHz sampling capability accommodates professional recording, mastering, broadcast, live-sound, and automotive audio requirements. The TDM interface provides a practical method for transporting the six converted channels over a compact serial connection while reducing the pin and routing burden associated with separate parallel interfaces.

The manufacturer describes the CS5366 as a complete six-channel converter intended for high-end and professional audio applications. Its stated 114 dB dynamic range and 192 kHz sample rate place it in a performance class where preserving low-level and full-scale audio detail is important. The converter architecture is specifically aimed at transparent conversion, wide dynamic range, and negligible distortion rather than serving only as a general-purpose low-cost converter.

Typical uses include A/V receivers, digital mixing consoles, multichannel recorders, outboard converters, digital effects processors, automotive audio systems, and live-sound equipment. In each case, the six-channel architecture reduces the number of converter packages needed, while the TDM interface simplifies digital routing to downstream processing. A design should still allocate adequate analog and digital supply bypassing and route high-speed serial signals with controlled impedance.

A key implementation consideration is that analog inputs, reference circuitry, clocking, ground returns, and the TDM interface must be planned together. Follow the manufacturer data sheet for the recommended input network, reference voltage, clock requirements, digital interface levels, and power-supply sequencing. The DQZ package also requires a land pattern and thermal strategy matched to its exposed-pad construction.

This product overview combines the converter's channel count, resolution, sampling rate, dynamic range, package, interface, and application guidance with practical sourcing, comparison, and design information. It also identifies documented pin-compatible family options and highlights which electrical and packaging details must be confirmed before a PCB or production BOM is released.

Alternativas drop-in para CS5366-DQZ — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.

CS5366-DQZR

✅ Drop-In
📦 48-LQFP, 7 mm x 7 mm
Same 6-channel, 24-bit, 192 kHz ADC and TDM interface; the suffix change may alter packing or ordering attributes, with 0% difference in stated headline performance.

📋 Alternativa de referência (fora do catálogo)

CS5366-CQZ

✅ Drop-In
📦 48-LQFP, 7 mm x 7 mm
Same 6-channel, 24-bit, 192 kHz converter and 48-LQFP format; the CQZ suffix identifies a different ordering configuration, with 0% difference in stated headline performance.

📋 Alternativa de referência (fora do catálogo)

CS5366-CQZR

✅ Drop-In
📦 48-LQFP, 7 mm x 7 mm
Same 6-channel, 24-bit, 192 kHz ADC and TDM interface; the suffix differs from DQZ, with 0% difference in stated headline performance.

📋 Alternativa de referência (fora do catálogo)

CS5366-DQZ Classificações máximas e características elétricas

Converter Type Six-channel audio ADC
Resolução 24 bit
Maximum Sample Rate 192 kHz per channel
Dynamic Range 114 dB
Number of Input Channels 6 channels
Digital Output Interface Serial TDM
Anti-Alias Filtering Integrated
Encapsulamento 48-LQFP, 7 mm x 7 mm
Tipo de montagem Surface mount
Product Category ADCs/DACs - Special Purpose
Application Class High-end and professional audio

Guia de Configuração de Pinos do CS5366-DQZ 48-lqfp, 7 mm x 7 mm

Configuração de pinos para CS5366-DQZ (pacote 48-lqfp, 7 mm x 7 mm). Este componente analógico possui pinos de entrada, saída e alimentação. Consulte o datasheet do fabricante para configurações de offset null, compensação e pino de enable. Ideal para circuitos de condicionamento de sinal e amplificadores.

Diagrama de pinagem do pacote 48-lqfp, 7 mm x 7 mm para CS5366-DQZ

Nenhum dado detalhado de pinagem disponível para CS5366-DQZ.

Consulte a ficha técnica para a configuração completa dos pinos.

Aplicações típicas

CS5366-DQZ é adequado para 6 aplicaçãos: Digital Mixing Console, Multichannel Recorder, A/V Receiver, Outboard Audio Converter, Digital Effects Processor, Automotive Audio System.

🎧

Digital Mixing Console

The CS5366-DQZ fits a digital mixing console because six simultaneous 24-bit channels reduce the number of converter packages required for a multichannel input section. Its 192 kHz maximum sample rate supports professional capture and processing rates, while 114 dB dynamic range preserves detail across quiet and loud program material. The serial TDM interface provides a compact route for transferring multiple channels to a mixer DSP or digital audio processor. Designers should use the manufacturer application circuit for analog input conditioning, reference components, clocking, grounding, and TDM timing. In a high-density console, keeping the converter away from switching supplies and high-current outputs helps preserve the transparent conversion and negligible-distortion behavior emphasized in the manufacturer data sheet.

🎙️

Multichannel Recorder

The CS5366-DQZ is suited to a multichannel recorder requiring simultaneous high-resolution conversion of six audio channels. Its 24-bit resolution and 192 kHz sampling capability support professional recording workflows where preserving low-level detail and minimizing conversion-related distortion are priorities. The integrated anti-alias filtering and TDM output reduce the number of discrete support functions and simplify routing into a recording engine. The converter should be placed close to the balanced input circuitry, with controlled reference and clock routing to maintain channel consistency. A key design trade-off is that the family is discontinued, so the recorder should be designed around confirmed long-term inventory rather than assuming uninterrupted production availability.

📺

A/V Receiver

The CS5366-DQZ can serve as the front-end converter in an A/V receiver that must accept six analog audio channels while preserving a wide dynamic range. Its 24-bit conversion resolution, 114 dB dynamic range, and 192 kHz maximum sample rate align with high-end surround and professional monitoring requirements. The serial TDM interface allows all six channels to reach a digital audio processor efficiently instead of requiring six separate converter outputs. Place analog input traces away from processor clocks and switching supply nodes, and follow the manufacturer layout guidance for the exposed-pad package. Because the converter family is discontinued, sourcing continuity is a practical system-level consideration alongside the audio performance benefits of 24-bit conversion.

🎚️

Outboard Audio Converter

The CS5366-DQZ fits an outboard converter in which multiple balanced analog inputs must be digitized without introducing a large channel count penalty. Six 24-bit channels at up to 192 kHz provide the core conversion function for recording studios, live-sound rigs, and location equipment. Its 114 dB dynamic range supports transparent capture, while integrated anti-alias filtering simplifies the analog-to-digital boundary. The TDM output is especially useful when the enclosure needs a compact connection to an FPGA, DSP, or digital interface controller. Board design should preserve the precision reference and clock domains, use the recommended analog input network, and isolate converter routing from high-current output stages. Legacy supply availability must be planned because the original family has been discontinued.

🎛️

Digital Effects Processor

The CS5366-DQZ is appropriate for a digital effects processor that accepts several analog inputs and applies real-time processing at high fidelity. Its six-channel architecture supports stereo or multichannel effect paths, while 24-bit resolution and 192 kHz sampling reduce quantization-related limits before digital gain, filtering, or effects processing. The TDM interface can feed a DSP efficiently and supports deterministic multi-channel transfer. For low-latency live or studio systems, follow the manufacturer's digital-interface and clocking recommendations so conversion and processing remain synchronized. The tradeoff is supply risk: because the CS5366 family is discontinued, inventory planning should include lead time and exact suffix traceability. Audio design can still benefit from the device's 114 dB dynamic range and transparent-conversion positioning.

🚗

Automotive Audio System

The CS5366-DQZ can support a multichannel automotive audio input stage because it combines six 24-bit channels, a 192 kHz maximum sample rate, and a serial TDM interface in one 48-LQFP package. This reduces converter count when the system accepts multiple balanced or differential source channels, and its 114 dB dynamic range supports high-quality cabin audio. The design must confirm the exact suffix's temperature range and AEC-Q100 status before automotive release. Robust implementation also requires careful grounding, transient protection at external inputs, clean supply rails, and thermal review of the exposed pad. Since the family is discontinued, long-term availability and change-control documentation are especially important for automotive production programs.

Where to buy CS5366-DQZ online?
The CS5366-DQZ can be requested through the Request a Quote form on this page. The part is a Cirrus Logic six-channel, 24-bit audio ADC in a 48-LQFP package, and the manufacturer documentation identifies it for professional and high-end audio systems. Because the family is listed as discontinued, confirm lifecycle status, exact suffix, package orientation, and available quantity during the quote process before releasing a production order.
What is the price of CS5366-DQZ?
Use the Request a Quote form on this page to obtain the current price and availability for CS5366-DQZ. No static price is stated because the CS5366 family is discontinued and the exact MPN may have limited inventory. A quotation should be evaluated against the complete part suffix, including the 48-LQFP package, because similar CS5366 ordering codes can represent different packing or temperature configurations.
What is the lead time for CS5366-DQZ?
Request the current lead time through the Request a Quote form on this page. The Cirrus Logic product family is discontinued, so lead time depends on remaining factory or channel inventory rather than normal production scheduling. Include the required annual and total quantities in the request, and request written confirmation that each shipment will use the exact CS5366-DQZ ordering code and original tray, tape, or reel format.
Is CS5366-DQZ in stock?
The current stock position for CS5366-DQZ should be confirmed through the Request a Quote form on this page. The manufacturer lists the CS5364, CS5366, and CS5368 family as discontinued, and the exact DQZ suffix may not be available from every source. Treat the device as a legacy supply item and secure a written stock confirmation before committing it to a new production release.
What are the key specifications of CS5366-DQZ that engineers should know?
The CS5366-DQZ is a six-channel, 24-bit audio ADC with a maximum sampling rate of 192 kHz per channel, 114 dB dynamic range, integrated anti-alias filtering, and a serial TDM interface. According to the manufacturer data sheet, it is designed for high-end and professional audio conversion. The device is packaged in a 48-LQFP measuring 7 mm by 7 mm, making the footprint and digital interface central to PCB and replacement decisions.
What is the operating voltage of CS5366-DQZ?
The operating-voltage limits must be taken from the manufacturer data sheet before the CS5366-DQZ is connected to a board. The verified product information establishes the six-channel audio ADC architecture, 24-bit resolution, 192 kHz sample rate, 114 dB dynamic range, and 48-LQFP package, but it does not state the numerical supply rails. Check the DC supply table, pin-description table, absolute-maximum ratings, and power-sequencing requirements before powering the device.
Where can I download the CS5366-DQZ datasheet PDF?
The CS5366 data sheet PDF is available through the manufacturer document link listed on this page. It is the appropriate source for the recommended application circuit, analog input network, reference voltage, clocking, TDM interface, electrical limits, and pin descriptions. Use the exact 48-LQFP DQZ package drawings when assigning PCB land patterns, and do not infer a footprint from a visually similar CS5366 suffix without checking its ordering information.
Where can I find the CS5366-DQZ pinout?
Use the pin-description table and package drawing in the manufacturer CS5366 data sheet to determine the CS5366-DQZ pinout. The verified catalog information identifies a 48-LQFP package but does not provide the individual terminal names, so no pin assignments are reproduced here. During PCB layout, cross-check every analog input, power, ground, reference, clock, and TDM signal against the data sheet for the exact DQZ ordering code.
What can replace CS5366-DQZ?
The closest documented same-family drop-in options are CS5366-DQZR, CS5366-CQZ, and CS5366-CQZR, each offering the same six-channel, 24-bit, 192 kHz converter function in the 48-LQFP family. According to Cirrus Logic, the CS5364, CS5366, and CS5368 devices are pin-compatible family members, but CS5364 and CS5368 have different channel counts. For a new design, verify suffix-specific temperature, packing, lifecycle, and availability requirements before substitution.
Is CS5366-DQZ the same as CS5366-CQZ?
CS5366-DQZ and CS5366-CQZ implement the same six-channel, 24-bit, 192 kHz audio ADC function in the 48-LQFP family, but their suffixes can identify different ordering, temperature, or packing configurations. According to the Cirrus Logic family information, the CS5366 is the six-channel member of a pin-compatible converter group. Treat the two as drop-in only after verifying the suffix definitions, package drawing, pin assignments, and operating-temperature requirements.
When should I choose CS5366-DQZ over CS5366-CQZR?
Choose the exact CS5366-DQZ ordering code when its suffix-specific qualification, temperature range, packing, and legacy supply conditions satisfy the production requirement. Choose CS5366-CQZR only when that alternative's ordering attributes match the design and the distinction between the suffix codes has been confirmed. Both parts use the six-channel, 24-bit, 192 kHz CS5366 converter architecture, so the decisive issues are procurement status and suffix-specific operating conditions rather than channel count or resolution.
Is CS5366-DQZ suitable for automotive audio systems?
CS5366-DQZ is suitable in principle for an automotive audio conversion stage because the manufacturer identifies automotive audio systems as an application and the device provides six 24-bit channels at up to 192 kHz. However, automotive use also requires confirmation of temperature grade, AEC-Q100 qualification, production status, and lifetime-supply expectations for the exact suffix. The verified product information does not establish those qualification details, so they must be checked before release.
CS5366-DQZ vs CS5366-DQZR - which is better for a professional mixer?
CS5366-DQZ and CS5366-DQZR share the six-channel, 24-bit, 192 kHz CS5366 audio-conversion architecture and 48-LQFP package. For a professional mixer, the deciding factors are suffix-specific temperature rating, qualification, packing, and supply status rather than the converter's headline resolution or sample rate. Because the original family is discontinued, select the variant that meets the product specification and can be supported consistently through the intended production life.
What is the best cross-brand equivalent for CS5366-DQZ?
No cross-brand drop-in equivalent is established by the available cross-reference information, so a specific competitor MPN should not be claimed without its own data sheet. The documented candidates are Cirrus Logic family members with the same converter architecture. A cross-brand replacement would need to preserve the 48-LQFP footprint, six-channel TDM interface, 24-bit resolution, 192 kHz sampling rate, clocking, reference requirements, and electrical timing.
Why is the CS5366 family shown as discontinued?
The CS5364, CS5366, and CS5368 are identified by Cirrus Logic as a discontinued family with low-latency digital filtering for real-time and live-sound applications. The CS5366 remains the six-channel member of that group. Because new production may be unavailable, engineers should request lifecycle confirmation and remaining inventory through the Request a Quote form and avoid creating new designs that depend on an unconfirmed long-term supply.

Dados de referência de engenharia para CS5366-DQZ — comparação, orientação de projeto e informações de conformidade.

Guia de seleção

Choose CS5366-DQZ when a legacy professional-audio design specifically calls that exact ordering code and its remaining supply can support the product's production plan. It provides the core CS5366 feature set: six channels, 24-bit resolution, 192 kHz sampling, 114 dB dynamic range, integrated anti-alias filtering, and a TDM interface. CS5366-DQZR, CS5366-CQZ, and CS5366-CQZR are same-family drop-in candidates when their suffix-specific temperature, packing, qualification, and lifecycle requirements are acceptable. Do not select CS5364 or CS5368 for an unchanged six-channel design merely because the family shares pin compatibility; their four- and eight-channel configurations alter channel counts and software or hardware routing. For a new design, compare current multichannel ADC families rather than assuming an obsolete converter is the lowest-risk long-term choice.

Comparação com alternativas

Parâmetro Este produto CS5366-DQZR CS5366-CQZ CS5366-CQZR
Brand Cirrus Logic Inc. Cirrus Logic Inc. Cirrus Logic Inc. Cirrus Logic Inc.
Package 48-LQFP, 7 mm x 7 mm 48-LQFP, 7 mm x 7 mm 48-LQFP, 7 mm x 7 mm 48-LQFP, 7 mm x 7 mm
Converter Type Six-channel audio ADC Six-channel audio ADC Six-channel audio ADC Six-channel audio ADC
Resolution 24 bit 24 bit 24 bit 24 bit
Maximum Sample Rate 192 kHz per channel 192 kHz per channel 192 kHz per channel 192 kHz per channel
Dynamic Range 114 dB 114 dB 114 dB 114 dB
Digital Interface Serial TDM Serial TDM Serial TDM Serial TDM
Anti-Alias Filtering Integrated Integrated Integrated Integrated
Lifecycle Status Obsolete Obsolete Obsolete Obsolete

Principais diferenciais

  • Six-channel conversion in one converter package (vs CS5366-DQZR)
  • Professional high-resolution audio positioning (vs CS5366-CQZ)
  • Six-channel TDM architecture instead of four or eight channels (vs CS5364-CQZ)

Notas de projeto

Implement the six analog inputs as symmetric, short paths with their grounding arranged according to the manufacturer application circuit. Keep switching-regulator traces, high-current output paths, and digital clock lines away from the reference and analog-input pins. Route the TDM signals as a compact group over a continuous reference plane, and observe the datasheet's recommended interface timing and impedance guidance. The exposed-pad land pattern must use the manufacturer 48-LQFP drawing rather than a generic 48-pin footprint.

Provide separate, well-decoupled analog and digital supply paths, and place the required bypass capacitors close to their associated device pins. Check the data sheet for permissible supply combinations, sequencing, reference voltage, and power-up behavior before assigning rail names on the schematic. Do not derive those electrical limits from the family description. Because the converter family is discontinued, inventory traceability should also include the manufacturer, exact suffix, date code, and lot information for every incoming shipment.

Treat the master clock, frame signal, and TDM data path as one timing-sensitive interface. Use the manufacturer's recommended clock topology and verify setup, hold, and data-valid timing at the actual system clock rate. Avoid long stubs, test pads without defined loading, and split return paths beneath high-speed signals. If the converter feeds an FPGA or DSP, confirm the receiving device's TDM channel format and slot alignment in hardware before interpreting channel assignment or apparent gain errors.

Do not substitute a CS5364 or CS5368 solely because Cirrus Logic describes the three devices as pin-compatible family members; those variants have four and eight channels rather than six. Likewise, verify that CS5366-CQZ, CS5366-CQZR, and CS5366-DQZR satisfy the required temperature, qualification, packing, and lifecycle conditions. A footprint match alone does not establish that the suffix is approved for the end use or that inventory can be sustained.

Informações de conformidade

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Sem chumbo
Unknown
Sem halogênios
Unknown
Minerais de conflito
Unknown

The manufacturer data sheet identifies automotive audio systems as an application, but the exact DQZ suffix's AEC-Q100 status and environmental compliance declarations are not stated in the available product information.

Buscas relacionadas

cs5366 cqz cs5366 datasheet cs5366 asl CS5366-DQZ datasheet PDF CS5366-DQZ pinout CS5366-DQZ 48-LQFP footprint CS5366-DQZ equivalent CS5366-DQZ replacement CS5366-DQZ vs CS5366-DQZR CS5366-DQZ application circuit CS5366-DQZ price CS5366-DQZ stock

Componentes & termos relacionados

Cirrus Logic Inc. CS5366-DQZ CS5366-DQZR CS5366-CQZ CS5366-CQZR CS5364 CS5368 Audio ADC Analog-to-digital converter Data converter Integrated circuit Semiconductor 24-bit resolution 192 kHz sampling 114 dB dynamic range TDM interface Anti-alias filter 48-LQFP LQFP package family Surface mount Professional audio Digital mixing console Multichannel recorder A/V receiver Automotive audio
RFQ de cotação rápida
Preencha todos os detalhes — nossa equipe de vendas responderá em até 24 horas
Part number Fabricante Encapsulamento QTY Preço-alvo Total
✓
Cotação enviada!

Responderemos seu e-mail em até 24 horas

1
RFQ enviada
2
Cotação recebida
3
Pedido realizado
4
Pagamento
5
Enviado
6
Entregue
Ver detalhes da RFQ