CS5366-DQZ - 6-Channel 24-Bit 192kHz Audio ADC | Cirrus Logic
MPN: CS5366-DQZ ✗ Cuối đờiCS5366-DQZ Tóm tắt
An audio ADC is a data-conversion IC that samples an analog audio waveform and converts it into a digital representation. It belongs to the ADC and DAC category, then to the broader signal-conversion and integrated-circuit hierarchy. In a digital audio signal chain, an ADC follows the microphone preamplifier, mixer, or line-level conditioning circuit. Its principal design goals are accurate amplitude conversion, low distortion, high dynamic range, and a digital interface that transfers multiple channels reliably to a codec, DSP, or audio processor.
The CS5366 integrates six simultaneous audio channels, analog-to-digital conversion, and anti-alias filtering. Its 24-bit conversion resolution supports high-fidelity recording and playback architectures, while the 192 kHz sampling capability accommodates professional recording, mastering, broadcast, live-sound, and automotive audio requirements. The TDM interface provides a practical method for transporting the six converted channels over a compact serial connection while reducing the pin and routing burden associated with separate parallel interfaces.
The manufacturer describes the CS5366 as a complete six-channel converter intended for high-end and professional audio applications. Its stated 114 dB dynamic range and 192 kHz sample rate place it in a performance class where preserving low-level and full-scale audio detail is important. The converter architecture is specifically aimed at transparent conversion, wide dynamic range, and negligible distortion rather than serving only as a general-purpose low-cost converter.
Typical uses include A/V receivers, digital mixing consoles, multichannel recorders, outboard converters, digital effects processors, automotive audio systems, and live-sound equipment. In each case, the six-channel architecture reduces the number of converter packages needed, while the TDM interface simplifies digital routing to downstream processing. A design should still allocate adequate analog and digital supply bypassing and route high-speed serial signals with controlled impedance.
A key implementation consideration is that analog inputs, reference circuitry, clocking, ground returns, and the TDM interface must be planned together. Follow the manufacturer data sheet for the recommended input network, reference voltage, clock requirements, digital interface levels, and power-supply sequencing. The DQZ package also requires a land pattern and thermal strategy matched to its exposed-pad construction.
This product overview combines the converter's channel count, resolution, sampling rate, dynamic range, package, interface, and application guidance with practical sourcing, comparison, and design information. It also identifies documented pin-compatible family options and highlights which electrical and packaging details must be confirmed before a PCB or production BOM is released.
Bộ thay thế dễ dàng lắp đặt cho CS5366-DQZ — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
CS5366-DQZR
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
CS5366-CQZ
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
CS5366-CQZR
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
CS5366-DQZ Tỷ lệ tối đa & tính chất điện
| Converter Type | Six-channel audio ADC |
| Độ phân giải | 24 bit |
| Maximum Sample Rate | 192 kHz per channel |
| Dynamic Range | 114 dB |
| Number of Input Channels | 6 channels |
| Digital Output Interface | Serial TDM |
| Anti-Alias Filtering | Integrated |
| Hộp | 48-LQFP, 7 mm x 7 mm |
| Kiểu lắp đặt | Surface mount |
| Product Category | ADCs/DACs - Special Purpose |
| Application Class | High-end and professional audio |
Hướng dẫn cấu hình chân CS5366-DQZ 48-lqfp, 7 mm x 7 mm
Cấu hình chân cho CS5366-DQZ (48-lqfp, 7 mm x 7 mm gói). Thành phần số hiệu này có chân đầu vào, đầu ra và nguồn cung cấp. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết cấu hình chân bù, bù trừ và chân kích hoạt. Hoàn hảo cho điều kiện tín hiệu và mạch khuếch đại.
Không có dữ liệu chân cụ thể sẵn có cho CS5366-DQZ.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
CS5366-DQZ phù hợp cho 6 Áp dụngs: Digital Mixing Console, Multichannel Recorder, A/V Receiver, Outboard Audio Converter, Digital Effects Processor, Automotive Audio System.
Digital Mixing Console
The CS5366-DQZ fits a digital mixing console because six simultaneous 24-bit channels reduce the number of converter packages required for a multichannel input section. Its 192 kHz maximum sample rate supports professional capture and processing rates, while 114 dB dynamic range preserves detail across quiet and loud program material. The serial TDM interface provides a compact route for transferring multiple channels to a mixer DSP or digital audio processor. Designers should use the manufacturer application circuit for analog input conditioning, reference components, clocking, grounding, and TDM timing. In a high-density console, keeping the converter away from switching supplies and high-current outputs helps preserve the transparent conversion and negligible-distortion behavior emphasized in the manufacturer data sheet.
Được đề xuất
Multichannel Recorder
The CS5366-DQZ is suited to a multichannel recorder requiring simultaneous high-resolution conversion of six audio channels. Its 24-bit resolution and 192 kHz sampling capability support professional recording workflows where preserving low-level detail and minimizing conversion-related distortion are priorities. The integrated anti-alias filtering and TDM output reduce the number of discrete support functions and simplify routing into a recording engine. The converter should be placed close to the balanced input circuitry, with controlled reference and clock routing to maintain channel consistency. A key design trade-off is that the family is discontinued, so the recorder should be designed around confirmed long-term inventory rather than assuming uninterrupted production availability.
Được đề xuất
A/V Receiver
The CS5366-DQZ can serve as the front-end converter in an A/V receiver that must accept six analog audio channels while preserving a wide dynamic range. Its 24-bit conversion resolution, 114 dB dynamic range, and 192 kHz maximum sample rate align with high-end surround and professional monitoring requirements. The serial TDM interface allows all six channels to reach a digital audio processor efficiently instead of requiring six separate converter outputs. Place analog input traces away from processor clocks and switching supply nodes, and follow the manufacturer layout guidance for the exposed-pad package. Because the converter family is discontinued, sourcing continuity is a practical system-level consideration alongside the audio performance benefits of 24-bit conversion.
Được đề xuất
Outboard Audio Converter
The CS5366-DQZ fits an outboard converter in which multiple balanced analog inputs must be digitized without introducing a large channel count penalty. Six 24-bit channels at up to 192 kHz provide the core conversion function for recording studios, live-sound rigs, and location equipment. Its 114 dB dynamic range supports transparent capture, while integrated anti-alias filtering simplifies the analog-to-digital boundary. The TDM output is especially useful when the enclosure needs a compact connection to an FPGA, DSP, or digital interface controller. Board design should preserve the precision reference and clock domains, use the recommended analog input network, and isolate converter routing from high-current output stages. Legacy supply availability must be planned because the original family has been discontinued.
Được đề xuất
Digital Effects Processor
The CS5366-DQZ is appropriate for a digital effects processor that accepts several analog inputs and applies real-time processing at high fidelity. Its six-channel architecture supports stereo or multichannel effect paths, while 24-bit resolution and 192 kHz sampling reduce quantization-related limits before digital gain, filtering, or effects processing. The TDM interface can feed a DSP efficiently and supports deterministic multi-channel transfer. For low-latency live or studio systems, follow the manufacturer's digital-interface and clocking recommendations so conversion and processing remain synchronized. The tradeoff is supply risk: because the CS5366 family is discontinued, inventory planning should include lead time and exact suffix traceability. Audio design can still benefit from the device's 114 dB dynamic range and transparent-conversion positioning.
Được đề xuất
Automotive Audio System
The CS5366-DQZ can support a multichannel automotive audio input stage because it combines six 24-bit channels, a 192 kHz maximum sample rate, and a serial TDM interface in one 48-LQFP package. This reduces converter count when the system accepts multiple balanced or differential source channels, and its 114 dB dynamic range supports high-quality cabin audio. The design must confirm the exact suffix's temperature range and AEC-Q100 status before automotive release. Robust implementation also requires careful grounding, transient protection at external inputs, clean supply rails, and thermal review of the exposed pad. Since the family is discontinued, long-term availability and change-control documentation are especially important for automotive production programs.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho CS5366-DQZ — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | CS5366-DQZR | CS5366-CQZ | CS5366-CQZR |
|---|---|---|---|---|
| Brand | Cirrus Logic Inc. | Cirrus Logic Inc. | Cirrus Logic Inc. | Cirrus Logic Inc. |
| Package | 48-LQFP, 7 mm x 7 mm | 48-LQFP, 7 mm x 7 mm | 48-LQFP, 7 mm x 7 mm | 48-LQFP, 7 mm x 7 mm |
| Converter Type | Six-channel audio ADC | Six-channel audio ADC | Six-channel audio ADC | Six-channel audio ADC |
| Resolution | 24 bit | 24 bit | 24 bit | 24 bit |
| Maximum Sample Rate | 192 kHz per channel | 192 kHz per channel | 192 kHz per channel | 192 kHz per channel |
| Dynamic Range | 114 dB | 114 dB | 114 dB | 114 dB |
| Digital Interface | Serial TDM | Serial TDM | Serial TDM | Serial TDM |
| Anti-Alias Filtering | Integrated | Integrated | Integrated | Integrated |
| Lifecycle Status | Obsolete | Obsolete | Obsolete | Obsolete |
Bảo phân biệt quan trọng
- Six-channel conversion in one converter package (vsCS5366-DQZR)
- Professional high-resolution audio positioning (vsCS5366-CQZ)
- Six-channel TDM architecture instead of four or eight channels (vsCS5364-CQZ)
Ghi chú thiết kế
Implement the six analog inputs as symmetric, short paths with their grounding arranged according to the manufacturer application circuit. Keep switching-regulator traces, high-current output paths, and digital clock lines away from the reference and analog-input pins. Route the TDM signals as a compact group over a continuous reference plane, and observe the datasheet's recommended interface timing and impedance guidance. The exposed-pad land pattern must use the manufacturer 48-LQFP drawing rather than a generic 48-pin footprint.
Provide separate, well-decoupled analog and digital supply paths, and place the required bypass capacitors close to their associated device pins. Check the data sheet for permissible supply combinations, sequencing, reference voltage, and power-up behavior before assigning rail names on the schematic. Do not derive those electrical limits from the family description. Because the converter family is discontinued, inventory traceability should also include the manufacturer, exact suffix, date code, and lot information for every incoming shipment.
Treat the master clock, frame signal, and TDM data path as one timing-sensitive interface. Use the manufacturer's recommended clock topology and verify setup, hold, and data-valid timing at the actual system clock rate. Avoid long stubs, test pads without defined loading, and split return paths beneath high-speed signals. If the converter feeds an FPGA or DSP, confirm the receiving device's TDM channel format and slot alignment in hardware before interpreting channel assignment or apparent gain errors.
Do not substitute a CS5364 or CS5368 solely because Cirrus Logic describes the three devices as pin-compatible family members; those variants have four and eight channels rather than six. Likewise, verify that CS5366-CQZ, CS5366-CQZR, and CS5366-DQZR satisfy the required temperature, qualification, packing, and lifecycle conditions. A footprint match alone does not establish that the suffix is approved for the end use or that inventory can be sustained.
Thông tin tuân thủ
The manufacturer data sheet identifies automotive audio systems as an application, but the exact DQZ suffix's AEC-Q100 status and environmental compliance declarations are not stated in the available product information.