DS90CR283MTDX/NOPB - 5V LVDS 28-Bit Channel Link Transmitter | TI
N.º da peça: DS90CR283MTDX/NOPB ✓ Ativo| Qtd. | Preço unitário | Total |
|---|---|---|
| 1 | $6.72 | $6,72 |
| 10 | $6.05 | $60,50 |
| 100 | $4.98 | $498,00 |
| 500 | $4.12 | $2.060,00 |
| 1.000 | $3.48 | $3.480,00 |
DS90CR283MTDX/NOPB Visão geral
Channel Link is a proprietary interface technology developed by National Semiconductor (now part of Texas Instruments) that serializes parallel data into LVDS pairs. This device belongs to the family of LVDS interface ICs, which are used to transmit high-speed digital data with low power consumption and excellent noise immunity. The DS90CR283MTDX/NOPB is the 5V version of the popular DS90CR285, which operates at 3.3V, making it suitable for legacy 5V logic systems.
Key features include a 28:4 data compression ratio, a rising-edge data strobe, and a phase-locked loop (PLL) for clock generation. The transmitter accepts 28 single-ended CMOS/TTL inputs and outputs four LVDS data pairs plus one LVDS clock pair. The device supports a wide input clock range and includes a power-down mode to reduce quiescent current. The TSSOP-56 package offers a compact footprint for space-constrained designs.
Technically, the DS90CR283MTDX/NOPB uses a differential signaling scheme with a typical output voltage swing of 350 mV across a 100-ohm termination resistor. The LVDS outputs are current-mode drivers that provide low electromagnetic interference (EMI) and high noise immunity. The PLL ensures that the transmitted clock is aligned with the data, simplifying receiver timing. The device is specified for the commercial temperature range (0°C to 70°C) and is RoHS compliant.
Typical applications include flat panel displays, digital video interfaces, and high-speed data links in industrial and consumer electronics. The 5V supply makes it ideal for interfacing with legacy TTL logic. When designing with this device, ensure proper termination of the LVDS lines with 100-ohm resistors and maintain controlled impedance on the PCB to preserve signal integrity.
Alternativas drop-in para DS90CR283MTDX/NOPB — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Ferramenta de comparação rápida — selecione peças alternativas para comparação lado a lado:
DS90CR285MTDX/NOPB
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
DS90CR283MTD
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
DS90CR283MTDX
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
DS90CR285MTD
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
DS90CR285MTDX
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
DS90CR583MTDX
⚡ Mesmo encapsulamento ⚠️ Especificações não verificadas📋 Alternativa de referência (fora do catálogo)
DS90CR283MTDX/NOPB Especificações
| Type | Transmitter |
| Number of Drivers/Receivers | 28/4 |
| Protocol | LVDS |
| Tensão de alimentação | 4.75 V ~ 5.25 V |
| Taxa de dados | 66 MHz (per channel) |
| Total Throughput | 1.848 Gbps |
| Input Type | CMOS/TTL |
| Tipo de saída | LVDS |
| Encapsulamento / Caixa | 56-TFSOP (0.240, 6.10mm Width) |
| Número de pinos | 56 |
| Faixa de temperatura de operação | 0°C to 70°C |
| Tipo de montagem | Surface Mount |
| Packaging | Tape & Reel (TR) |
| Status RoHS | Compliant |
| Lead-Free | Yes |
Configuração de pinos do DS90CR283MTDX/NOPB
| Pino 1 | VCC — Power supply (5V) |
| Pino 2 | GND — Ground |
| Pino 3 | IN0 — Data input 0 |
| Pino 4 | IN1 — Data input 1 |
| Pino 5 | IN2 — Data input 2 |
| Pino 6 | IN3 — Data input 3 |
| Pino 7 | IN4 — Data input 4 |
| Pino 8 | IN5 — Data input 5 |
| Pino 9 | IN6 — Data input 6 |
| Pino 10 | IN7 — Data input 7 |
| Pino 11 | GND — Ground |
| Pino 12 | IN8 — Data input 8 |
| Pino 13 | IN9 — Data input 9 |
| Pino 14 | IN10 — Data input 10 |
| Pino 15 | IN11 — Data input 11 |
| Pino 16 | IN12 — Data input 12 |
| Pino 17 | IN13 — Data input 13 |
| Pino 18 | IN14 — Data input 14 |
| Pino 19 | IN15 — Data input 15 |
| Pino 20 | GND — Ground |
| Pino 21 | IN16 — Data input 16 |
| Pino 22 | IN17 — Data input 17 |
| Pino 23 | IN18 — Data input 18 |
| Pino 24 | IN19 — Data input 19 |
| Pino 25 | IN20 — Data input 20 |
| Pino 26 | IN21 — Data input 21 |
| Pino 27 | IN22 — Data input 22 |
| Pino 28 | IN23 — Data input 23 |
| Pino 29 | GND — Ground |
| Pino 30 | IN24 — Data input 24 |
| Pino 31 | IN25 — Data input 25 |
| Pino 32 | IN26 — Data input 26 |
| Pino 33 | IN27 — Data input 27 |
| Pino 34 | CLKIN — Clock input |
| Pino 35 | PLLVCC — PLL power supply |
| Pino 36 | PLLGND — PLL ground |
| Pino 37 | OUT0+ — LVDS output 0 positive |
| Pino 38 | OUT0- — LVDS output 0 negative |
| Pino 39 | OUT1+ — LVDS output 1 positive |
| Pino 40 | OUT1- — LVDS output 1 negative |
| Pino 41 | OUT2+ — LVDS output 2 positive |
| Pino 42 | OUT2- — LVDS output 2 negative |
| Pino 43 | OUT3+ — LVDS output 3 positive |
| Pino 44 | OUT3- — LVDS output 3 negative |
| Pino 45 | CLKOUT+ — LVDS clock output positive |
| Pino 46 | CLKOUT- — LVDS clock output negative |
| Pino 47 | GND — Ground |
| Pino 48 | VCC — Power supply |
| Pino 49 | PD — Power down (active low) |
| Pino 50 | NC — No connect |
| Pino 51 | NC — No connect |
| Pino 52 | NC — No connect |
| Pino 53 | NC — No connect |
| Pino 54 | NC — No connect |
| Pino 55 | NC — No connect |
| Pino 56 | NC — No connect |
Aplicações típicas
DS90CR283MTDX/NOPB é adequado para 6 aplicaçãos: Flat Panel Display Interface, Digital Video Transmission, Industrial Automation Control Link, Medical Imaging Equipment, Test and Measurement Instrumentation, Security and Surveillance Systems.
Flat Panel Display Interface
The DS90CR283MTDX/NOPB is ideal for transmitting RGB video data from a graphics controller to a flat panel display. Its 28-bit input width matches typical 24-bit RGB plus control signals, and the LVDS output reduces cable count and EMI. The 5V supply interfaces directly with legacy TTL graphics controllers, simplifying design. At 66 MHz, it supports resolutions up to XGA (1024x768) at 60 Hz. The differential signaling ensures signal integrity over long ribbon cables, making it a robust choice for industrial displays and monitors.
Recomendado
Digital Video Transmission
In digital video systems, the DS90CR283MTDX/NOPB serializes 28 parallel data lines into 4 LVDS pairs, reducing interconnect complexity and cost. It is commonly used in projectors, video walls, and medical imaging equipment. The 5V operation allows direct connection to 5V CMOS video processors without level shifting. The PLL ensures low jitter on the transmitted clock, critical for stable video timing. With a total throughput of 1.848 Gbps, it can handle high-definition video streams, making it suitable for broadcast and professional AV applications.
Recomendado
Industrial Automation Control Link
The DS90CR283MTDX/NOPB provides a reliable, high-speed link between PLCs, motor drives, and sensors in industrial environments. Its LVDS outputs are immune to common-mode noise, ensuring error-free data transmission over long cable runs. The 5V supply is compatible with industrial 5V logic, and the wide operating temperature range (0-70°C) suits factory floor conditions. The 28-bit parallel interface simplifies connection to microcontrollers or FPGAs, and the low EMI of LVDS reduces interference with nearby sensitive equipment. This makes it a cost-effective solution for industrial control backplanes.
Recomendado
Medical Imaging Equipment
In medical imaging systems such as ultrasound and endoscopy, the DS90CR283MTDX/NOPB transmits high-resolution image data from sensors to processing units. The low-voltage differential signaling minimizes radiation, which is crucial in sensitive medical environments. The 5V supply integrates with existing medical-grade power rails, and the 66 MHz data rate supports high-frame-rate imaging. The compact TSSOP-56 package saves board space in portable devices. The device's robust ESD protection ensures reliability in clinical settings, making it a trusted choice for diagnostic equipment.
Recomendado
Test and Measurement Instrumentation
The DS90CR283MTDX/NOPB is used in oscilloscopes, logic analyzers, and data acquisition systems to transfer captured data to display or host interfaces. Its high throughput and low skew ensure accurate data representation. The 5V supply is common in bench instruments, and the LVDS interface reduces crosstalk in dense PCB layouts. The device supports continuous data streaming at 66 MHz, ideal for real-time waveform display. The 28-bit width can carry multiple channels of data simultaneously, simplifying system architecture. This makes it a versatile component for precision instrumentation.
Recomendado
Security and Surveillance Systems
In security cameras and video surveillance systems, the DS90CR283MTDX/NOPB transmits video data from image sensors to processing units over long distances. The LVDS interface provides high noise immunity, ensuring clear video even in electrically noisy environments. The 5V supply is compatible with common camera power rails, and the low power consumption of LVDS extends battery life in wireless cameras. The 28-bit input can carry 24-bit color plus sync signals, supporting high-quality video. The compact package allows integration into small camera modules, making it ideal for IP cameras and DVRs.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para DS90CR283MTDX/NOPB — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | DS90CR285MTDX/NOPB | DS90CR283MTD | DS90CR283MTDX | DS90CR285MTD | DS90CR285MTDX | DS90CR583MTDX |
|---|---|---|---|---|---|---|---|
| Package | 56-TSSOP | 56-TSSOP | 56-TSSOP | 56-TSSOP | 56-TSSOP | 56-TSSOP | 56-TSSOP |
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Supply Voltage | 4.75V - 5.25V | 3.0V - 3.6V | 4.75V - 5.25V | 4.75V - 5.25V | 3.0V - 3.6V | 3.0V - 3.6V | 3.0V - 3.6V |
| Data Rate | 66 MHz | 66 MHz | 66 MHz | 66 MHz | 66 MHz | 66 MHz | 66 MHz |
| Number of Inputs | 28 | 28 | 28 | 28 | 28 | 28 | 48 |
| LVDS Outputs | 4 data + 1 clock | 4 data + 1 clock | 4 data + 1 clock | 4 data + 1 clock | 4 data + 1 clock | 4 data + 1 clock | 8 data + 1 clock |
| RoHS | Compliant | Compliant | Non-compliant | Non-compliant | Non-compliant | Non-compliant | Compliant |
| Lifecycle | Active | Active | NRND | NRND | NRND | NRND | Active |
Principais diferenciais
- 5V supply operation (vs DS90CR285MTDX/NOPB)
- RoHS compliant and lead-free (vs DS90CR283MTD)
- Active lifecycle status (vs DS90CR283MTDX)
Notas de projeto
For optimal signal integrity, route the LVDS output pairs as differential pairs with 100-ohm differential impedance. Keep the trace lengths matched within 5 mils to minimize skew. Place the 100-ohm termination resistor as close to the receiver input as possible. Use a solid ground plane beneath the LVDS traces to reduce EMI and crosstalk.
Decouple the VCC and PLLVCC pins with 0.1uF ceramic capacitors placed as close to the pins as possible. Additionally, use a 10uF bulk capacitor on the main VCC rail. The PLL is sensitive to power supply noise; a ferrite bead in series with PLLVCC can further isolate it. Ensure the supply voltage stays within 4.75V to 5.25V to maintain PLL lock.
The DS90CR283MTDX/NOPB typically dissipates less than 1W, but in high-temperature environments, ensure adequate airflow or a thermal pad on the PCB. The TSSOP-56 package has a theta_JA of approximately 40°C/W. For reliable operation, keep the junction temperature below 125°C. If the device is placed near other heat sources, consider adding vias under the package to improve heat dissipation.
Informações de conformidade
RoHS compliant per TI product page. Lead-free per /NOPB suffix. Not AEC-Q100 qualified.
