EFM32TG222F32-D-QFP48 - 32MHz Cortex-M3 MCU | Silicon Labs
MPN: EFM32TG222F32-D-QFP48 ✓ Hoạt độngEFM32TG222F32-D-QFP48 Tóm tắt
A microcontroller is a programmable semiconductor that integrates a CPU core, memory, and peripherals into one device. The EFM32TG222 belongs to the Tiny Gecko family within the EFM32 product portfolio. Its combination of 32 MHz processing performance, 4 kB SRAM, and extensive configurable peripherals makes it suitable for applications that need responsive control, efficient serial communication, and compact implementation in a 7 mm × 7 mm surface-mount package.
Key features include 32 kB Flash, 4 kB RAM, 37 digital I/O pins, two 16-bit timers, AES hardware, and three operational amplifiers. The supply-voltage range of 1.98 V to 3.8 V supports common low-voltage system rails. Fast wake-up and energy-saving modes are important for devices that spend substantial time asleep and need short active intervals for sensor acquisition, control updates, or communications.
The ARM Cortex-M3 architecture provides a 32-bit processing environment while retaining a straightforward embedded instruction set. Two 16-bit timers support periodic timing, pulse measurement, and motor or general-purpose control tasks. Configurable I/O allows pins to be assigned according to board-level routing, while the operational amplifiers can reduce external analog component count in suitable low-level signal-conditioning designs.
Typical uses include industrial sensor nodes, compact energy meters, building controls, portable accessories, battery-powered instrumentation, and connected IoT equipment. In these systems, the microcontroller can acquire sensor data, execute control logic, drive indicators, and communicate through configured serial peripherals. Its 48-pin TQFP footprint also provides more I/O than smaller QFN packages commonly used for cost-constrained designs.
Designers should preserve the manufacturer-recommended decoupling and programming interfaces, and they should review the complete pin-description table before assigning signals. The exposed 1.98 V to 3.8 V operating range requires compatible power regulation, while careful clock and sleep-mode planning is essential for achieving low average energy consumption in battery-operated products.
Bộ thay thế dễ dàng lắp đặt cho EFM32TG222F32-D-QFP48 — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với EFM32TG222F32-D-QFP48 (cùng hình factor và footprint) — khác nhau ở Flash Memory, Package, Product Type, Series, Architecture.
EFM32TG222F32-QFP48
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →EFM32ZG222F32-QFP48
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →EFM32HG222F32G-A-QFP48
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
EFM32HG321F32G-A-QFP48R
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
EFM32TG822F8-QFP48
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →EFM32TG222F32-D-QFP48 Tỷ lệ tối đa & tính chất điện
| Product Type | 32-bit ARM Cortex-M3 microcontroller |
| Series | EFM32 Tiny Gecko |
| Maximum CPU Frequency | 32 MHz |
| Flash Memory | 32 kB |
| RAM | 4 kB |
| Digital I/O Pins | 37 pins |
| Timers | 2 × 16-bit timers |
| Điện áp cung cấp hoạt động | 1.98 V to 3.8 V |
| CPU Architecture | ARM Cortex-M3, 32-bit RISC |
| Security Feature | AES hardware |
| Operational Amplifiers | 3 integrated operational amplifiers |
| Hộp | 48-pin TQFP, 7 mm × 7 mm |
| Kiểu lắp đặt | Surface mount |
| Program Memory Type | Flash |
| Low-Power Features | Energy-saving modes and fast wake-up |
Hướng dẫn cấu hình chân EFM32TG222F32-D-QFP48 48-pin tqfp, 7 mm × 7 mm
Cấu hình chân cho EFM32TG222F32-D-QFP48 (48-pin tqfp, 7 mm × 7 mm gói). IC số này bao gồm chân GPIO, giao diện truyền thông (UART, SPI, I2C) và chân nguồn. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết các chức năng chân thay thế và tùy chọn cấu hình. Cực kỳ quan trọng cho thiết kế hệ thống tích hợp và lập trình PCB.
Không có dữ liệu chân cụ thể sẵn có cho EFM32TG222F32-D-QFP48.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
EFM32TG222F32-D-QFP48 phù hợp cho 6 Áp dụngs: Battery-Powered Sensor Nodes, Industrial Condition Monitoring, Smart Energy Metering, Building Control Equipment, Portable Medical Accessories, Connected IoT Gateways.
Battery-Powered Sensor Nodes
The EFM32TG222F32-D-QFP48 fits compact sensor nodes that periodically wake, acquire measurements, evaluate control logic, and return to sleep. Its energy-saving modes and fast wake-up behavior reduce the inactive interval between events, while the 32 MHz Cortex-M3 core allows control work to be completed without raising the clock continuously. The 32 kB Flash accommodates firmware and fixed data, and 4 kB RAM supports transient sensor processing, although designs requiring large sample buffers should account for the 4 kB limit. The 1.98 V to 3.8 V supply range also supports low-voltage battery-derived rails when the regulator and cell chemistry are selected appropriately.
Được đề xuất
Industrial Condition Monitoring
The EFM32TG222F32-D-QFP48 can serve as the control and communications MCU in industrial condition-monitoring equipment that measures vibration, temperature, current, or equipment state. Two 16-bit timers provide timing resources for periodic sampling and event detection, while 37 digital I/O pins leave substantial control and interface capacity. Its 32 MHz processing rate supports responsive signal evaluation, and the 48-pin TQFP package offers ample routing space for debug, communications, and discrete I/O. The 1.98 V to 3.8 V operating range permits integration with industrial low-voltage rails, provided the system protects the device from transients outside the specified limits.
Được đề xuất
Smart Energy Metering
The EFM32TG222F32-D-QFP48 is appropriate for compact energy-metering controllers that must combine periodic measurement, local calculations, status indication, and communications. Its 32 kB Flash provides space for metering firmware, 4 kB RAM supports working state, and the 37 I/O pins can be assigned to sensor inputs, display control, communications, and configuration controls. AES hardware can assist with secure data handling when the complete firmware architecture defines appropriate keys and protocols. Because the RAM is limited to 4 kB, designs should stream or aggregate samples carefully rather than retain long uncompressed histories.
Được đề xuất
Building Control Equipment
The EFM32TG222F32-D-QFP48 fits building-control modules that coordinate digital inputs, outputs, and low-speed communications while managing energy use. Its energy-saving modes support systems that remain connected to building power but avoid continuous high-rate processing, and fast wake-up behavior improves response after a scheduled or event-driven wake. The 48-pin TQFP package provides more I/O than compact QFN devices, which is useful for multiple relay-control inputs, status LEDs, bus connections, and service interfaces. The three integrated operational amplifiers may simplify suitable low-level sensing stages, although external buffering or protection should be added where signal amplitude or noise conditions require it.
Được đề xuất
Portable Medical Accessories
The EFM32TG222F32-D-QFP48 can be used in low-power portable medical accessories that perform local control, user-interface management, and limited data processing. Its low-power architecture is valuable in battery-powered products, while 37 digital I/O pins provide flexibility for buttons, indicators, sensors, and external interface control. The integrated three operational amplifiers can support suitable low-level analog stages without requiring a separate amplifier in every design. Medical applications still require application-specific review of electrical safety, isolation, accuracy, firmware validation, and regulatory obligations; the MCU specification alone does not establish medical certification or compliance.
Được đề xuất
Connected IoT Gateways
The EFM32TG222F32-D-QFP48 is suitable for compact IoT edge nodes that aggregate local sensor information and manage power-efficient communications. The 32 MHz Cortex-M3 core handles protocol tasks and application logic, while 32 kB Flash and 4 kB RAM support embedded firmware that does not require a large operating system. Its 37 digital I/O pins allow connection of sensors, indicators, and status inputs around a network interface. The low-power modes and fast wake-up behavior help support duty-cycled operation, but protocol buffering must be sized around the 4 kB RAM limit. An Ethernet companion can provide connectivity where the gateway architecture requires it.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho EFM32TG222F32-D-QFP48 — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | EFM32TG222F32-QFP48 | EFM32ZG222F32-QFP48 | EFM32HG222F32G-A-QFP48 | EFM32HG321F32G-A-QFP48R | EFM32TG822F8-QFP48 |
|---|---|---|---|---|---|---|
| Package | 48-pin TQFP (7 mm × 7 mm) | 48-pin TQFP (7 mm × 7 mm) | 48-pin TQFP (7 mm × 7 mm) | 48-pin TQFP (7 mm × 7 mm) | 48-pin TQFP (7 mm × 7 mm) | 48-pin TQFP (7 mm × 7 mm) |
| Brand | Silicon Labs | Silicon Labs | Silicon Labs | Silicon Labs | Silicon Labs | Silicon Labs |
| Flash Memory | 32 kB | 32 kB | 32 kB | 32 kB | 32 kB | 8 kB |
Bảo phân biệt quan trọng
- Higher maximum clock speed than the Zero Gecko alternative (vsEFM32ZG222F32-QFP48)
- Four times the Flash capacity of the reduced-memory Tiny Gecko option (vsEFM32TG822F8-QFP48)
- AES hardware and three integrated operational amplifiers in one MCU (vsEFM32HG222F32G-A-QFP48)
- Closeest same-core, same-memory, same-package alternative (vsEFM32TG222F32-QFP48)
Ghi chú thiết kế
Design the supply for the specified 1.98 V to 3.8 V operating range, including startup and transient margins. Place the manufacturer's recommended decoupling capacitors close to the supply and ground pins, and keep high-current return paths away from sensitive analog inputs. The integrated operational amplifiers can reduce external analog component count, but their supply, common-mode range, output swing, and stability requirements must be checked before using them in a signal path.
Use the complete 48-pin pin-description table when assigning signals because multiplexed functions and alternate debug interfaces can restrict otherwise available I/O. Route sensitive analog inputs away from switching nodes and digital clock traces, provide a quiet ground reference for analog circuitry, and follow the manufacturer's recommended footprint dimensions. Check programming and debug access before finalizing the PCB so connector placement does not interfere with the MCU or surrounding components.
Estimated average-current calculation: use Iavg = Iactive × tactive + Isleep × tsleep over one complete operating cycle, then multiply by the supply voltage to estimate energy per cycle. For example, with 3.3 V, 10 mA active for 20 ms, and 5 µA sleep for 980 ms, the calculated average current is approximately 0.205 mA. Actual duty-cycle values must come from the deployed firmware and peripheral measurements.
Do not treat a same-package candidate as a guaranteed functional replacement. The EFM32ZG222F32-QFP48 changes the core and maximum clock speed, the HG candidates belong to different peripheral families, and the EFM32TG822F8-QFP48 has only 8 kB Flash. Review peripheral availability, interrupt behavior, startup files, firmware dependencies, and qualification before approving a substitution.
Thông tin tuân thủ
The manufacturer documentation should be used to confirm environmental, material, and automotive qualification requirements for the exact ordering code.