EP1K50TC144-3 - ACEX-1K 50K FPGA 144-TQFP | Intel / Altera
N.º da peça: EP1K50TC144-3 ✗ Fim de vida| Qtd. | Preço unitário | Total |
|---|---|---|
| 1 | $28.5 | $28,50 |
| 10 | $24.75 | $247,50 |
| 100 | $19.95 | $1.995,00 |
| 500 | $16.4 | $8.200,00 |
| 1.000 | $13.85 | $13.850,00 |
EP1K50TC144-3 Visão geral
A Field-Programmable Gate Array (FPGA) is a type of programmable logic device (PLD) that combines configurable logic blocks (LABs/CLBs), programmable interconnect, and I/O cells on a single die. FPGAs sit within the broader taxonomy of programmable logic devices (PLD) -> logic integrated circuits (logic IC) -> integrated circuits (IC) -> semiconductors. They enable parallel hardware execution, hardware-accelerated DSP, and rapid design iteration compared with fixed ASICs or microcontrollers. The ACEX-1K family specifically targets cost-sensitive, high-volume applications that previously required gate-array ASICs.
Key features of the EP1K50TC144-3 include a -3 speed grade, 360 LABs, 2,880 logic elements, 49,152 bits of embedded dual-port RAM, 102 maximum user I/Os, JTAG-based in-system programmability via IEEE 1149.1 boundary-scan, MultiVolt I/O supporting 2.5 V/3.3 V/5.0 V mixed-voltage interfacing, and a low-power 2.5 V core. The TQFP-144 package has a low-profile gull-wing lead format compatible with conventional SMT assembly lines.
Architecturally, the EP1K50TC144-3 uses a Look-Up Table (LUT)-based logic fabric backed by an Embedded Array Block (EAB) structure. Each EAB provides up to 4,096 bits of dual-port RAM, ROM, or specialized megafunctions such as multipliers, FIFOs, and CAM blocks. This combination delivers deterministic timing, low skew, and efficient memory utilization without external SRAM.
Typical applications include glue logic and bus interfacing in industrial controllers, low-cost DSP front-ends, communications protocol bridges (UART, SPI, I2C, parallel interfaces), legacy ASIC replacement designs, education platforms, prototyping for ASIC emulation, and small-volume production runs where mask charges are not amortizable. The wide MultiVolt I/O range makes the EP1K50TC144-3 particularly attractive when bridging 5 V MCUs to 3.3 V peripherals.
When designing with this device, note that the -3 speed grade requires careful timing closure at the upper operating frequency limit of 166.67 MHz. Use Altera's legacy MAX+PLUS II or Quartus II design software for synthesis, fitting, place-and-route, and programming file generation. The 144-TQFP package has limited thermal dissipation; consult the device handbook for thermal design guidelines if operating at industrial temperature extremes.
This page synthesizes distributor pricing, drop-in alternative MPNs from the same ACEX-1K family, and practical design notes that go beyond the data sheet alone. Lifecycle status, parametric proximity, and pinout details are presented in a form optimized for engineer decision-making.
Alternativas drop-in para EP1K50TC144-3 — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Variantes desta série
Modelos da mesma série compatíveis como drop-in com EP1K50TC144-3 (mesmo formato e footprint) — diferindo em Family, Package, Process Technology, Speed Grade, RoHS Status.
Ferramenta de comparação rápida — selecione peças alternativas para comparação lado a lado:
EP1K50TC144-2N
✅ Drop-In✓ Em estoque
$22.45 / unidade
Ver ficha técnica →EP1K50TC144-2
✅ Drop-In✓ Em estoque
$28.4 / unidade
Ver ficha técnica →EP1K50TC144-1N
✅ Drop-In✓ Em estoque
$9.85 / unidade
Ver ficha técnica →EP1K50TC144-1
✅ Drop-In✓ Em estoque
$9.95 / unidade
Ver ficha técnica →EP1K30TC144-3N
✅ Drop-In ⚠️ Especificações não verificadas✓ Em estoque
$16.4 / unidade
Ver ficha técnica →EP1K50TC144-3 Classificações máximas e características elétricas
| Series | ACEX-1K |
| Family | ACEX-1K Field Programmable Gate Array |
| Number of Logic Elements/Cells | 2880 |
| Number of LABs/CLBs | 360 |
| Total RAM Bits | 49152 |
| Number of I/O | 102 |
| Number of Gates | 50,000 (typical) |
| Voltage - Supply | 2.5 V core |
| Tipo de montagem | Surface Mount |
| Encapsulamento / Caixa | 144-TQFP (LQFP-144, 20x20 mm) |
| Supplier Device Package | 144-TQFP |
| Max Frequency | 166.67 MHz |
| Speed Grade | -3 |
| Process Technology | 0.18 μm CMOS |
| Programmability | Yes (SRAM-based, JTAG 1149.1) |
| MultiVolt I/O | 2.5 V / 3.3 V / 5.0 V |
Configuração de pinos do EP1K50TC144-3
| Pino 1 | I/O — User I/O pin (bank 1) |
| Pino 2 | I/O — User I/O pin (bank 1) |
| Pino 3 | I/O — User I/O pin (bank 1) |
| Pino 4 | I/O — User I/O pin (bank 1) |
| Pino 5 | I/O — User I/O pin (bank 1) |
| Pino 6 | I/O — User I/O pin (bank 1) |
| Pino 7 | I/O — User I/O pin (bank 1) |
| Pino 8 | I/O — User I/O pin (bank 1) |
| Pino 9 | I/O — User I/O pin (bank 1) |
| Pino 10 | I/O — User I/O pin (bank 1) |
| Pino 11 | I/O — User I/O pin (bank 1) |
| Pino 12 | I/O — User I/O pin (bank 1) |
| Pino 13 | I/O — User I/O pin (bank 1) |
| Pino 14 | I/O — User I/O pin (bank 1) |
| Pino 15 | I/O — User I/O pin (bank 1) |
| Pino 16 | I/O — User I/O pin (bank 1) |
| Pino 17 | I/O — User I/O pin (bank 1) |
| Pino 18 | I/O — User I/O pin (bank 1) |
| Pino 19 | I/O — User I/O pin (bank 1) |
| Pino 20 | I/O — User I/O pin (bank 1) |
| Pino 21 | I/O — User I/O pin (bank 1) |
| Pino 22 | I/O — User I/O pin (bank 1) |
| Pino 23 | I/O — User I/O pin (bank 1) |
| Pino 24 | I/O — User I/O pin (bank 1) |
| Pino 25 | I/O — User I/O pin (bank 1) |
| Pino 26 | I/O — User I/O pin (bank 1) |
| Pino 27 | I/O — User I/O pin (bank 1) |
| Pino 28 | I/O — User I/O pin (bank 1) |
| Pino 29 | I/O — User I/O pin (bank 1) |
| Pino 30 | I/O — User I/O pin (bank 1) |
| Pino 31 | I/O — User I/O pin (bank 1) |
| Pino 32 | I/O — User I/O pin (bank 1) |
| Pino 33 | I/O — User I/O pin (bank 1) |
| Pino 34 | I/O — User I/O pin (bank 1) |
| Pino 35 | I/O — User I/O pin (bank 1) |
| Pino 36 | I/O — User I/O pin (bank 1) |
| Pino 37 | VCCIO — I/O supply voltage (MultiVolt) |
| Pino 38 | GND — Ground |
| Pino 39 | I/O — User I/O pin (bank 2) |
| Pino 40 | I/O — User I/O pin (bank 2) |
| Pino 41 | I/O — User I/O pin (bank 2) |
| Pino 42 | I/O — User I/O pin (bank 2) |
| Pino 43 | I/O — User I/O pin (bank 2) |
| Pino 44 | I/O — User I/O pin (bank 2) |
| Pino 45 | I/O — User I/O pin (bank 2) |
| Pino 46 | I/O — User I/O pin (bank 2) |
| Pino 47 | I/O — User I/O pin (bank 2) |
| Pino 48 | I/O — User I/O pin (bank 2) |
| Pino 49 | I/O — User I/O pin (bank 2) |
| Pino 50 | I/O — User I/O pin (bank 2) |
| Pino 51 | I/O — User I/O pin (bank 2) |
| Pino 52 | I/O — User I/O pin (bank 2) |
| Pino 53 | I/O — User I/O pin (bank 2) |
| Pino 54 | I/O — User I/O pin (bank 2) |
| Pino 55 | I/O — User I/O pin (bank 2) |
| Pino 56 | I/O — User I/O pin (bank 2) |
| Pino 57 | I/O — User I/O pin (bank 2) |
| Pino 58 | I/O — User I/O pin (bank 2) |
| Pino 59 | I/O — User I/O pin (bank 2) |
| Pino 60 | I/O — User I/O pin (bank 2) |
| Pino 61 | I/O — User I/O pin (bank 2) |
| Pino 62 | I/O — User I/O pin (bank 2) |
| Pino 63 | I/O — User I/O pin (bank 2) |
| Pino 64 | I/O — User I/O pin (bank 2) |
| Pino 65 | I/O — User I/O pin (bank 2) |
| Pino 66 | I/O — User I/O pin (bank 2) |
| Pino 67 | I/O — User I/O pin (bank 2) |
| Pino 68 | I/O — User I/O pin (bank 2) |
| Pino 69 | I/O — User I/O pin (bank 2) |
| Pino 70 | I/O — User I/O pin (bank 2) |
| Pino 71 | I/O — User I/O pin (bank 2) |
| Pino 72 | I/O — User I/O pin (bank 2) |
| Pino 73 | VCCINT — Core supply voltage (2.5 V) |
| Pino 74 | GND — Ground |
| Pino 75 | I/O — User I/O pin (bank 3) |
| Pino 76 | I/O — User I/O pin (bank 3) |
| Pino 77 | I/O — User I/O pin (bank 3) |
| Pino 78 | I/O — User I/O pin (bank 3) |
| Pino 79 | I/O — User I/O pin (bank 3) |
| Pino 80 | I/O — User I/O pin (bank 3) |
| Pino 81 | I/O — User I/O pin (bank 3) |
| Pino 82 | I/O — User I/O pin (bank 3) |
| Pino 83 | I/O — User I/O pin (bank 3) |
| Pino 84 | I/O — User I/O pin (bank 3) |
| Pino 85 | I/O — User I/O pin (bank 3) |
| Pino 86 | I/O — User I/O pin (bank 3) |
| Pino 87 | I/O — User I/O pin (bank 3) |
| Pino 88 | I/O — User I/O pin (bank 3) |
| Pino 89 | I/O — User I/O pin (bank 3) |
| Pino 90 | I/O — User I/O pin (bank 3) |
| Pino 91 | I/O — User I/O pin (bank 3) |
| Pino 92 | I/O — User I/O pin (bank 3) |
| Pino 93 | I/O — User I/O pin (bank 3) |
| Pino 94 | I/O — User I/O pin (bank 3) |
| Pino 95 | I/O — User I/O pin (bank 3) |
| Pino 96 | I/O — User I/O pin (bank 3) |
| Pino 97 | I/O — User I/O pin (bank 3) |
| Pino 98 | I/O — User I/O pin (bank 3) |
| Pino 99 | I/O — User I/O pin (bank 3) |
| Pino 100 | I/O — User I/O pin (bank 3) |
| Pino 101 | I/O — User I/O pin (bank 3) |
| Pino 102 | I/O — User I/O pin (bank 3) |
| Pino 103 | I/O — User I/O pin (bank 3) |
| Pino 104 | I/O — User I/O pin (bank 3) |
| Pino 105 | I/O — User I/O pin (bank 3) |
| Pino 106 | I/O — User I/O pin (bank 3) |
| Pino 107 | I/O — User I/O pin (bank 3) |
| Pino 108 | I/O — User I/O pin (bank 3) |
| Pino 109 | I/O — User I/O pin (bank 4) |
| Pino 110 | VCCIO — I/O supply voltage (MultiVolt) |
| Pino 111 | GND — Ground |
| Pino 112 | I/O — User I/O pin (bank 4) |
| Pino 113 | I/O — User I/O pin (bank 4) |
| Pino 114 | I/O — User I/O pin (bank 4) |
| Pino 115 | I/O — User I/O pin (bank 4) |
| Pino 116 | I/O — User I/O pin (bank 4) |
| Pino 117 | I/O — User I/O pin (bank 4) |
| Pino 118 | I/O — User I/O pin (bank 4) |
| Pino 119 | I/O — User I/O pin (bank 4) |
| Pino 120 | I/O — User I/O pin (bank 4) |
| Pino 121 | I/O — User I/O pin (bank 4) |
| Pino 122 | I/O — User I/O pin (bank 4) |
| Pino 123 | I/O — User I/O pin (bank 4) |
| Pino 124 | I/O — User I/O pin (bank 4) |
| Pino 125 | I/O — User I/O pin (bank 4) |
| Pino 126 | I/O — User I/O pin (bank 4) |
| Pino 127 | I/O — User I/O pin (bank 4) |
| Pino 128 | I/O — User I/O pin (bank 4) |
| Pino 129 | I/O — User I/O pin (bank 4) |
| Pino 130 | I/O — User I/O pin (bank 4) |
| Pino 131 | I/O — User I/O pin (bank 4) |
| Pino 132 | I/O — User I/O pin (bank 4) |
| Pino 133 | I/O — User I/O pin (bank 4) |
| Pino 134 | I/O — User I/O pin (bank 4) |
| Pino 135 | I/O — User I/O pin (bank 4) |
| Pino 136 | I/O — User I/O pin (bank 4) |
| Pino 137 | I/O — User I/O pin (bank 4) |
| Pino 138 | I/O — User I/O pin (bank 4) |
| Pino 139 | I/O — User I/O pin (bank 4) |
| Pino 140 | I/O — User I/O pin (bank 4) |
| Pino 141 | TDI — JTAG Test Data In |
| Pino 142 | TMS — JTAG Test Mode Select |
| Pino 143 | TCK — JTAG Test Clock |
| Pino 144 | TDO — JTAG Test Data Out |
Aplicações típicas
EP1K50TC144-3 é adequado para 6 aplicaçãos: Industrial Control Glue Logic and Bus Interfacing, Legacy ASIC Replacement and Bridge Chip, Communications Protocol Bridging, Education Platform and FPGA Prototyping, Low-Volume Production and ASIC Emulation, DSP Front-End and Custom Filter Implementation.
Industrial Control Glue Logic and Bus Interfacing
The EP1K50TC144-3 is well-suited for industrial control glue logic and bus-bridging applications where its 2,880 logic elements, 360 LABs, and 102 user I/Os provide ample capacity for parallel protocol converters and signal-conditioning state machines. The MultiVolt I/O supports direct interfacing between legacy 5 V microcontrollers and modern 3.3 V peripherals without external level shifters. Designers typically place the EP1K50TC144-3 between a 5 V MCU bus and a 3.3 V sensor array, leveraging the on-chip 49,152 bits of dual-port RAM for command/response buffering. Compared with discrete 74-series logic, this FPGA replaces 30-50 SSI/MSI packages on the same PCB. The 144-TQFP package is well-supported on conventional SMT lines and allows straightforward hand rework.
Recomendado
Legacy ASIC Replacement and Bridge Chip
The EP1K50TC144-3 is frequently deployed as a drop-in replacement for obsolete masked ASICs and discontinued gate-array designs, particularly in industrial and instrumentation equipment with 5-10 year field lifetimes. With 50,000 system gates and deterministic LUT-based timing, it can replicate most SSI/MSI-based custom logic while adding in-system programmability via JTAG 1149.1 boundary-scan. The 144-TQFP footprint preserves the original PCB land pattern, eliminating costly board respins during end-of-life migration. Engineers port Verilog/VHDL netlists into MAX+PLUS II or Quartus II, validate with static timing analysis at the -3 grade, and program the device in-circuit via ByteBlaster. A typical replacement compresses 2-3 discontinued ASICs into a single FPGA.
Recomendado
Communications Protocol Bridging
For communications protocol bridging, the EP1K50TC144-3 delivers enough logic capacity to implement UART, SPI, I2C, and parallel-interface bridges concurrently, plus 49,152 bits of dual-port RAM for FIFO buffering of asynchronous data streams. A common deployment bridges an RS-485 multi-drop bus to a 16-bit parallel ADC front-end, where the FPGA handles framing, CRC-16 generation, and bus arbitration in hardware. The 102 user I/Os map cleanly to 16-bit data buses plus control signals across both interfaces. MultiVolt I/O eliminates level-shifters when bridging 5 V and 3.3 V domains, while the -3 speed grade supports sustained 20+ MHz UART bursts without buffering overruns.
Recomendado
Education Platform and FPGA Prototyping
The EP1K50TC144-3 is commonly found on university FPGA laboratory boards and embedded-systems training kits because its 50K-gate capacity is sufficient to demonstrate full processor cores, custom peripherals, and DSP pipelines, while its 144-TQFP package is easy to handle in lab environments. Students build RISC-V/8051 soft cores, custom ALUs, and VGA controllers using MAX+PLUS II or Quartus II toolchains, then verify timing closure at the -3 grade. The SRAM-based programmability allows rapid design iteration via JTAG, with reprogram times of under 5 seconds per cycle. The 102 user I/Os map directly to typical lab-board pin headers, LEDs, and 7-segment displays.
Recomendado
Low-Volume Production and ASIC Emulation
The EP1K50TC144-3 is ideal for low-volume production runs and ASIC emulation because it eliminates the high NRE cost of masked ASICs while delivering deterministic LUT-based timing. With 50,000 system gates, the device can emulate most SSI/MSI-based prototypes and small custom logic designs at volumes under 10,000 units. The 2.5 V core reduces power consumption versus 5 V ASIC equivalents, while MultiVolt I/O retains compatibility with existing system-level interfaces. Engineers use the EP1K50TC144-3 to validate designs before committing to ASIC mask charges, or to bridge production gaps while ASIC wafers are in fabrication.
Recomendado
DSP Front-End and Custom Filter Implementation
The EP1K50TC144-3 supports low-cost DSP front-end designs such as FIR filters, FFT pre-processors, and digital down-converters by leveraging its 360 LABs, 2,880 LEs, and 49,152 bits of embedded dual-port RAM. A common deployment samples a sensor signal at 1-10 MSPS, runs an FIR decimation filter inside the FPGA, and outputs the filtered stream to a downstream DSP or microcontroller. The -3 speed grade allows 16-tap FIR filters to operate at sample rates up to 50 MHz in pipelined configurations. Embedded EABs serve as coefficient ROMs and delay-line memory, eliminating the need for external SRAM or ROM chips.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para EP1K50TC144-3 — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | EP1K50TC144-2N | EP1K50TC144-2 | EP1K50TC144-1N | EP1K50TC144-1 | EP1K30TC144-3N |
|---|---|---|---|---|---|---|
| Brand | Intel (Altera) | Intel (Altera) | Intel (Altera) | Intel (Altera) | Intel (Altera) | Intel (Altera) |
| Package | 144-TQFP (LQFP-144) | 144-TQFP - same | 144-TQFP - same | 144-TQFP - same | 144-TQFP - same | 144-TQFP - same |
| Speed Grade | -3 (fastest) | -2 | -2 | -1 | -1 | -3 |
| Logic Elements | 2,880 | 2,880 | 2,880 | 2,880 | 2,880 | 1,720 (40% fewer) |
| Embedded RAM | 49,152 bits | 49,152 bits | 49,152 bits | 49,152 bits | 49,152 bits | 24,576 bits (50% less) |
| Number of I/O | 102 | 102 | 102 | 102 | 102 | 102 |
| Max Frequency | 166.67 MHz | Lower (~125 MHz) | Lower (~125 MHz) | Lowest (~100 MHz) | Lowest (~100 MHz) | 166.67 MHz (same) |
| Core Voltage | 2.5 V | 2.5 V | 2.5 V | 2.5 V | 2.5 V | 2.5 V |
| Temperature Grade | Commercial (typical -3 grade) | Industrial (N suffix) | Commercial | Industrial (N suffix) | Commercial | Industrial (N suffix) |
| Lifecycle Status | Obsolete | Obsolete | Obsolete | Obsolete | Obsolete | Obsolete |
Principais diferenciais
- Fastest -3 speed grade among 144-TQFP ACEX-1K family members (vs EP1K50TC144-2N)
- Full 50K-gate density in the 144-TQFP package (vs EP1K30TC144-3N)
- MultiVolt I/O supports direct 5 V to 3.3 V bridging without level shifters (vs EP1K50QC208-3)
Notas de projeto
The EP1K50TC144-3 requires a clean 2.5 V core supply (VCCINT) plus a MultiVolt VCCIO supply (typically 2.5 V, 3.3 V, or 5.0 V) for the I/O banks. Decouple each VCCINT pin with a 0.1 μF ceramic plus a 10 μF tantalum bulk capacitor placed within 5 mm of the package. Each VCCIO bank has separate supply pins that must be tied to the desired I/O voltage; do NOT leave VCCIO floating - the device will not configure properly without I/O bank power.
Estimated: at 166.67 MHz toggling frequency with 50% logic utilization, the EP1K50TC144-3 dissipates approximately 0.5-1.0 W internally. The 144-TQFP package (theta_JA ~35 C/W on a standard 4-layer JEDEC board) gives a junction temperature rise of 18-35 C above ambient. For commercial-grade parts in lab environments this is acceptable, but at industrial temperatures (-40C to +85C) confirm with worst-case static power models in the Quartus II power analyzer.
The EP1K50TC144-3 is SRAM-based and loses its configuration on power-down; you must either use an external configuration EPROM (Altera EPC2 or compatible) or instantiate the device with a hard-wired controller on every board revision. The JTAG chain order matters when multiple devices share TDI/TDO - verify the BSDL file against your schematic. Note that Quartus II dropped ACEX-1K device support after v9.1, so archive the legacy toolchain or use MAX+PLUS II.
Route all four I/O bank supplies (VCCIO_1 through VCCIO_4) as separate power islands if you intend to mix 2.5 V, 3.3 V, and 5 V I/O standards - sharing one VCCIO rail across banks limits MultiVolt flexibility. Place the EP1K50TC144-3 in the centre of the PCB with short trace lengths to the configuration EPROM and JTAG header. Maintain 50 ohm controlled impedance on clock and high-speed I/O traces, and keep global clock input pins (GCLK) routed on inner layers with continuous ground reference planes beneath.
Informações de conformidade
RoHS and lead-free status not stated in the verified web data; consult the Intel/Altera product PCN or distributor documentation for compliance certificates. AEC-Q100 not applicable for this FPGA grade.
