EP20K400FI784-2 - 400K Gate APEX 20K FPGA, 784-BGA | Altera
N.º da peça: EP20K400FI784-2 ✗ Fim de vida| Qtd. | Preço unitário | Total |
|---|---|---|
| 1 | $145 | $145,00 |
| 10 | $128.5 | $1.285,00 |
| 100 | $108.75 | $10.875,00 |
| 250 | $95.2 | $23.800,00 |
| 500 | $82.4 | $41.200,00 |
EP20K400FI784-2 Visão geral
Alternativas drop-in para EP20K400FI784-2 — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Variantes desta série
Modelos da mesma série compatíveis como drop-in com EP20K400FI784-2 (mesmo formato e footprint) — diferindo em Process Technology, Speed Grade, Package, Logic Elements, Family.
Ferramenta de comparação rápida — selecione peças alternativas para comparação lado a lado:
EP20K400FI784-1
✅ Drop-In✓ Em estoque
$175 / unidade
Ver ficha técnica →EP20K400FC784-2
✅ Drop-In✓ Em estoque
$175 / unidade
Ver ficha técnica →EP20K400FC784-3
✅ Drop-In✓ Em estoque
$175 / unidade
Ver ficha técnica →EP20K400FC784-1
✅ Drop-In✓ Em estoque
$92 / unidade
Ver ficha técnica →EP20K400FI784-2 Classificações máximas e características elétricas
| Device Family | APEX 20K |
| Typical Gates | 400,000 |
| Dedicated Inputs | 4 |
| Nominal Core Supply Voltage (VCCINT) | 2.5 V |
| VCCINT Range | 2.375 V to 2.625 V |
| Speed Grade | -2 |
| Faixa de temperatura de operação | -40 °C to +100 °C |
| Package Type | S-PBGA-B784 (FineLine BGA) |
| Package Pin Count | 784 balls |
| Ball Pitch | 1.000 mm |
| Tipo de montagem | Surface Mount |
| Device Form Factor | Loadable PLD |
| Configuration Memory | SRAM-based (volatile) |
Guia de Configuração de Pinos do EP20K400FI784-2 784 balls
Configuração de pinos para EP20K400FI784-2 (pacote 784 balls). Este CI digital inclui GPIO, interfaces de comunicação (UART, SPI, I2C) e pinos de alimentação. Consulte o datasheet do fabricante para funções alternativas dos pinos e opções de configuração. Essencial para projeto de sistemas embarcados e layout de PCB.
Nenhum dado detalhado de pinagem disponível para EP20K400FI784-2.
Consulte a ficha técnica para a configuração completa dos pinos.
Aplicações típicas
EP20K400FI784-2 é adequado para 6 aplicaçãos: Telecom Backplane Glue Logic, Industrial Control and Factory Automation, Legacy ASIC Replacement, Medical Imaging Data Aggregation, Test and Measurement Instrumentation, Legacy Networking Line Cards.
Telecom Backplane Glue Logic
The EP20K400FI784-2 fits telecom backplane glue-logic designs where approximately 400K gates are needed to bridge bus protocols, perform CRC/framing, and aggregate low-speed control planes. Its 784-ball BGA provides abundant user I/O for 32-bit or 64-bit parallel buses, while the industrial -40 to +100 °C range tolerates uncontrolled cabinet temperatures. Designers typically instantiate multiple LVTTL/LVCMOS I/O banks and use the embedded system blocks (ESBs) as small FIFOs or parity RAM.
Recomendado
Industrial Control and Factory Automation
Factory automation controllers benefit from the EP20K400FI784-2's combination of approximately 400K gates, embedded RAM for fast look-up tables, and industrial-grade temperature tolerance. Engineers use the APEX 20K device to implement deterministic state machines, encoder/decoder logic for fieldbus protocols, and safety interlocks. The FineLine BGA-784 with 1.0 mm pitch requires a 6+ layer PCB with microvias, which is standard for industrial controller mainboards already designed for high-density BGA logic.
Recomendado
Legacy ASIC Replacement
The EP20K400FI784-2 is widely used to replace obsolete ASICs in long-lifecycle programs such as avionics retrofit, military radio, and railway signaling. With approximately 400K gates, designers port netlists from gate-level ASIC tools into Quartus II, preserving logic equivalence while gaining supply-chain resilience. The 2.5 V VCCINT matches older ASIC rails, simplifying power-tree reuse, and the 784-ball BGA offers sufficient I/O for wide memory buses (SRAM, FIFO) common in legacy designs.
Recomendado
Medical Imaging Data Aggregation
Medical imaging carts and bedside monitors use the EP20K400FI784-2 to aggregate multiple sensor streams (CCD/CMOS imagers, ultrasound probes) before forwarding compressed data over USB or Ethernet. The APEX 20K's ESB blocks provide fast dual-port RAM for line buffering, while the LUT fabric performs lossless compression and packetization. The industrial temperature range accommodates equipment that warms during continuous imaging. Note: medical safety certification requires additional system-level design; this part is not AEC-Q100 qualified.
Recomendado
Test and Measurement Instrumentation
Test and measurement instruments (oscilloscope digitizers, logic analyzers, protocol exercisers) leverage the EP20K400FI784-2 for pattern generation, custom triggering, and high-speed serial protocol decoding. With approximately 400K gates the device can implement parallel data acquisition state machines alongside protocol-aware search engines. The 784-ball FineLine BGA delivers enough user I/O to interface with multi-channel ADC front ends at rates up to 200 MHz when paired with external clock management.
Recomendado
Legacy Networking Line Cards
Multi-service edge routers and SDH/SONET line cards deployed in the early 2000s use the EP20K400FI784-2 for cell/packet processing, traffic shaping, and overhead processing. Although modern designs use newer Cyclone or Stratix families, the part remains in service for backward-compatible line-card spares. The 2.5 V VCCINT and 784-ball BGA match existing line-card PCB artwork, allowing direct swap into legacy platforms without re-spin.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para EP20K400FI784-2 — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | EP20K400FI784-1 | EP20K400FC784-2 | EP20K400FC784-3 | EP20K400FC784-1 |
|---|---|---|---|---|---|
| Brand | Altera | Altera | Altera | Altera | Altera |
| Package | FineLine BGA-784 (S-PBGA-B784, 1.0 mm pitch) | FineLine BGA-784 (same) | FineLine BGA-784 (same) | FineLine BGA-784 (same) | FineLine BGA-784 (same) |
| Typical Gates | 400,000 | 400,000 | 400,000 | 400,000 | 400,000 |
| Speed Grade | -2 (mid) | -1 (fastest) | -2 (mid) | -3 (slowest) | -1 (fastest) |
| Temperature Range | -40 °C to +100 °C (industrial) | -40 °C to +100 °C (industrial) | 0 °C to +70 °C (commercial) | 0 °C to +70 °C (commercial) | 0 °C to +70 °C (commercial) |
| Core Voltage (VCCINT) | 2.5 V nominal (2.375-2.625 V) | 2.5 V nominal (same) | 2.5 V nominal (same) | 2.5 V nominal (same) | 2.5 V nominal (same) |
| Dedicated Inputs | 4 | 4 | 4 | 4 | 4 |
| Lifecycle Status | Obsolete | Obsolete | Obsolete | Obsolete | Obsolete |
Principais diferenciais
- Speed grade -2 offers better timing margin vs -3 for moderate-speed designs (vs EP20K400FC784-3)
- Industrial temperature range supports harsh-environment deployment (vs EP20K400FC784-2 (commercial))
- Same 784-ball BGA as speed-grade -1 enables drop-in performance upgrade (vs EP20K400FI784-1)
Notas de projeto
The APEX 20K core requires a tightly regulated 2.5 V supply (range 2.375-2.625 V). Use a low-dropout regulator such as a TPS7A4533 followed by a ferrite bead network feeding the VCCINT pins. Place 100 µF tantalum bulk plus 0.1 µF X7R ceramic bypass capacitors within 100 mil of each VCCINT pin group; APEX 20K power integrity is sensitive to simultaneous switching noise on the parallel core rails.
Although APEX 20K static power is modest, dynamic power scales with toggle rate and can push junction temperatures high in dense designs. The 784-ball FineLine BGA uses a thermal-enhanced lid; thermal pad must be soldered to a flooded copper plane on the top PCB layer with thermal vias to inner ground planes. Derate to 70 percent of rated I/O toggle rate if ambient exceeds 70 °C.
The 1.000 mm pitch FineLine BGA-784 requires a multilayer PCB (at least 6 layers) with microvia or via-in-pad technology to fan out the interior balls. Use 4-mil line/space on outer layers and 1 oz copper inner planes. Follow the APEX 20K package-out reference design from Altera for breakout patterns - non-standard escape routing causes signal-integrity failures on LVDS and SSTL pairs.
Estimated: configuration PROMs must be sized for compressed bitstreams. EP20K400 compressed bitstreams typically fit in an EPC2 (2 Mbit) but only marginally - leave 30 percent headroom. A common pitfall is forgetting nCONFIG or nSTATUS pull-up resistors; if omitted the device fails to enter user mode and stays tri-stated. Always verify JTAG IDCODE before mass production to catch counterfeit or remarked parts.
Use series termination on all LVTTL outputs driving traces longer than 1 inch to match the APEX 20K I/O impedance of approximately 50 ohms. For SSTL2/SSTL3 memory interfaces, route clock and DQS to within 50 mil of matching length to avoid setup/hold violations. Do not share VCCIO banks between 3.3 V LVCMOS and 2.5 V SSTL - this is a frequent board-spin cause.
Informações de conformidade
RoHS/REACH compliance not verified in provided web data; APEX 20K family predates many modern compliance requirements. AEC-Q100 is not applicable (FPGA, not automotive-grade qualified). For new automotive designs, do not select this part.
