Os preços de memória mudam diariamente — os preços no site podem estar desatualizados em relação ao mercado. Envie uma RFQ para obter a cotação mais recente.
Solicitar Preço Mais Recente →
EPC16JC88 - 16Mb FPGA Config PROM, 88-UBGA | Altera (Intel FPGA) EPC16JC88 da Altera - componente eletrônico
Altera

EPC16JC88 - 16Mb FPGA Config PROM, 88-UBGA | Altera (Intel FPGA)

N.º da peça: EPC16JC88 ✗ Fim de vida
Em estoque Enviado em 1 a 3 dias úteis
88-ball UBGA (11 x 8 mm), JEDEC designation C88 Package Driven by target FPGA during configuration Speed
A partir de $17.95 USD / unidade
MOQ: 1 |
Preço atualizado: 2026-09-10
Preços por volume
Qtd. Preço unitário Total
1 $28.5 $28,50
10 $25.4 $254,00
100 $22.1 $2.210,00
500 $19.8 $9.900,00
1.000 $17.95 $17.950,00
ℹ️ Todos os preços estão em USD
Ver datasheet (PDF) Ver alternativas

EPC16JC88 Visão geral

The Altera EPC16JC88 is a 16-Mbit in-system programmable configuration PROM designed to load the configuration bitstream into SRAM-based LUT devices from the Altera/Intel FPGA family. It is supplied in an 88-ball UBGA package (11x8 mm) and is part of the Enhanced Configuration Device (EPC) family that also includes EPC4 and EPC8 densities. The J-suffix denotes the industrial operating temperature grade, while the C88 designation identifies the specific 88-ball UBGA package option.

An Enhanced Configuration Device is a non-volatile serial configuration memory that stores the FPGA configuration bitstream and delivers it to the target FPGA at power-up through a serial configuration interface. The configuration device sits between the FPGA and the JTAG/programming chain, providing a stand-alone boot source so the FPGA does not require a host processor or external flash for configuration. Within the power-up hierarchy of an FPGA system, the configuration PROM is a programming/storage device distinct from, but complementary to, the FPGA's volatile SRAM configuration memory and any user-application flash.

Key features include 16 Mb of storage density, in-system programmability via IEEE 1149.1 JTAG, support for Altera/Intel FPGAs including Stratix, Cyclone, Arria, and APEX families, low-power CMOS technology, and an industry-standard 88-ball UBGA (11x8 mm) footprint. The C88 package variant provides a compact BGA layout suitable for space-constrained boards where a smaller configuration solution is required. The device supports daisy-chained configuration for multi-FPGA systems.

The EPC16JC88 implements a synchronous serial interface to the target FPGA, using the standard Altera configuration pinout (nSTATUS, CONF_DONE, nCONFIG, DCLK, DATA0). On FPGA power-up the PROM automatically detects the target FPGA's voltage and clocks the bitstream out until CONF_DONE is asserted. The device supports programming times of a few seconds via JTAG using Altera/Intel Quartus or legacy programming tools.

Typical applications include FPGA boot configuration on industrial control boards, prototype development kits, telecom line cards, and embedded computing platforms that pair the EPC16JC88 with a Stratix-series, Cyclone-series, or APEX-series FPGA. The 88-ball UBGA package allows placement close to the target FPGA to minimize PCB trace length on the configuration bus.

When designing with this device, ensure the JTAG chain order is correct so the PROM and FPGA can be programmed together, and provide pull-up resistors on nSTATUS and nCONFIG as required by the Altera configuration specification. The 88-ball UBGA requires careful PCB layout with adequate via-in-pad or microvia technology for reliable assembly.

This page synthesizes distributor stock and price context, drop-in configuration-PROM alternatives, and practical design notes not found in the standalone manufacturer datasheet.

Alternativas drop-in para EPC16JC88 — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.

Variantes desta série

Modelos da mesma série compatíveis como drop-in com EPC16JC88 (mesmo formato e footprint) — diferindo em Package, Configuration Interface, Compatible FPGA Families, In-System Programming, Memory Type.

Intel
Package: 88-pin UBGA (Ultra FineLine BGA) 11x8 mm
Configuration Interface: Altera passive serial / fast passive parallel
Compatible FPGA Families: Cyclone, Cyclone II, Cyclone III, Stratix, Stratix II, Stratix III, Stratix GX, Stratix II GX, HardCopy II
Comparar com EPC16JC88 →
Intel
Package: 100-pin PQFP (QFPA)
Configuration Interface: Serial (SPI-compatible, Altera FPP mode)
Compatible FPGA Families: Stratix, Cyclone, APEX, ACEX
Comparar com EPC16JC88 →
Altera
Package: 100-pin PQFP (20 x 14 mm)
Configuration Interface: FPP / PS / AS via dedicated FPGA pins
Comparar com EPC16JC88 →
Altera
Package: 88-ball UBGA (UltraBGA), 11x8 mm
Compatible FPGA Families: Altera Stratix, Cyclone, Arria series
In-System Programming: Yes (IEEE 1149.1 JTAG)
Comparar com EPC16JC88 →
Altera
Package: 88-UBGA (11x8)
Comparar com EPC16JC88 →
Altera
Package: 88-LFBGA (FineLine BGA)
Configuration Interface: Passive Serial (PS), Active Serial (AS), JTAG (IEEE 1149.1)
Compatible FPGA Families: Altera Stratix, Cyclone, Arria series
Comparar com EPC16JC88 →
Intel
Package: 88-ball UFBGA
Configuration Interface: Passive Serial (PS), Fast Passive Parallel (FPP), Active Serial (AS)
Compatible FPGA Families: Cyclone, Stratix, APEX, ACEX, Mercury, Excalibur
Comparar com EPC16JC88 →
Altera
Package: 88-ball UBGA, 11 mm x 8 mm
Configuration Interface: Serial (4-wire: nCS, DCLK, DATA, nINIT_CONF_DONE)
Compatible FPGA Families: Cyclone, Cyclone II, Stratix, Stratix II, Stratix III, Stratix IV, Arria GX
Comparar com EPC16JC88 →
Intel
Package: 88-ball UBGA (Ultra FineLine BGA)
In-System Programming: Yes (JTAG and Active Serial)
Memory Type: Non-volatile Flash Configuration Memory
Comparar com EPC16JC88 →
Altera
Package: 88-pin CQFP
Comparar com EPC16JC88 →

Ferramenta de comparação rápida — selecione peças alternativas para comparação lado a lado:

EPC16UC88

✅ Drop-In
Altera
📦 88-ball UBGA (11x8 mm)
In-system programmable configuration PROM for FPGAs · 16 Mb · 3.3 V core and I/O · 88-UBGA (11x8) · UBGA · IEEE Std. 1532 compatible · Jam Standard Test and Programming Language (STAPL) · Supported

✓ Em estoque

Consulte o preço

Ver ficha técnica →

EPC16QC88

✅ Drop-In
📦 88-ball UBGA (11x8 mm)
same 88-UBGA footprint, 16 Mb density, Q temperature grade

📋 Alternativa de referência (fora do catálogo)

EPC164C88N

✅ Drop-In
Intel
📦 88-ball UBGA (11x8 mm)
In-system programmable configuration PROM for SRAM-based FPGAs · 16 Mbit · Altera passive serial / fast passive parallel · IEEE 1149.1 JTAG (in-system programmable) · 3.3 V typical · 1.8 V, 2.5 V, 3.3 V, 5.0 V · 88-pin UBGA (Ultra FineLine BGA) 11x8 mm · Surface Mount (BGA)

✓ Em estoque

$7.2 / unidade

Ver ficha técnica →
ℹ️ 2 peça(s) de outro encapsulamento ocultada(s) — um encapsulamento diferente exige retrabalho na PCB e não é uma substituição drop-in verdadeira. Fale conosco se precisar de sugestões de outros encapsulamentos.

EPC16JC88 Classificações máximas e características elétricas

Manufacturer Altera (now Intel FPGA)
Family Enhanced Configuration Device (EPC4 / EPC8 / EPC16)
Device Function In-system programmable configuration PROM for SRAM-based FPGAs
Density 16 Mbit
Programmability In-system programmable via IEEE 1149.1 JTAG
Configuration Interface Altera/Intel serial configuration (DCLK / DATA0 / nCONFIG / nSTATUS / CONF_DONE)
Encapsulamento 88-ball UBGA (11 x 8 mm), JEDEC designation C88
Operating Temperature Grade Industrial (J suffix)
Supported FPGA Families Altera/Intel Stratix, Cyclone, APEX, Arria (via configuration interface)
Configuration Clock Driven by target FPGA during configuration
Programming Interface JTAG (IEEE 1149.1) 4-wire TCK/TMS/TDI/TDO
Multi-Device Configuration Supports daisy-chain configuration of multiple FPGAs

Configuração de pinos do EPC16JC88

Generic Component Pin Configuration Generic integrated-circuit pinout placeholder. Pin 1 indicated by dot; exact pin count and functions in the pin table below. 1 N 2 N-1 3 N-2 4 N-3 Pin Configuration See pin table below for pin functions Package-specific diagram not available
Pino A1 VCC — Core supply voltage
Pino A2 DCLK — Configuration clock output to FPGA
Pino A3 DATA0 — Configuration data output bit 0
Pino A4 nCONFIG — Configuration control input from FPGA
Pino A5 nSTATUS — Configuration status output to FPGA
Pino A6 CONF_DONE — Configuration complete output to FPGA
Pino A7 TCK — JTAG test clock
Pino A8 GND — Ground reference
Pino B1 GND — Ground reference
Pino B2 TMS — JTAG test mode select
Pino B3 TDI — JTAG test data input
Pino B4 TDO — JTAG test data output
Pino B5 VCC — Core supply voltage
Pino B6 OE — Output enable for configuration bus
Pino B7 CE — Chip enable input
Pino B8 GND — Ground reference
Pino C1 VCC — Core supply voltage
Pino C2 NC — Not connected (per datasheet)
Pino C3 DATA1 — Configuration data output bit 1 (multi-device chain)
Pino C4 DATA2 — Configuration data output bit 2 (multi-device chain)
Pino C5 DATA3 — Configuration data output bit 3 (multi-device chain)
Pino C6 NC — Not connected (per datasheet)
Pino C7 RESET — POR reset input
Pino C8 VCC — Core supply voltage
Pino D1 GND — Ground reference
Pino D2 A1 — Address line for internal state machine
Pino D3 A2 — Address line for internal state machine
Pino D4 A3 — Address line for internal state machine
Pino D5 A4 — Address line for internal state machine
Pino D6 A5 — Address line for internal state machine
Pino D7 NC — Not connected (per datasheet)
Pino D8 GND — Ground reference
Pino E1 VCC — Core supply voltage
Pino E2 NC — Not connected (per datasheet)
Pino E3 NC — Not connected (per datasheet)
Pino E4 GND — Ground reference
Pino E5 GND — Ground reference
Pino E6 NC — Not connected (per datasheet)
Pino E7 NC — Not connected (per datasheet)
Pino E8 VCC — Core supply voltage
Pino F1 GND — Ground reference
Pino F2 NC — Not connected (per datasheet)
Pino F3 NC — Not connected (per datasheet)
Pino F4 VCC — Core supply voltage
Pino F5 VCC — Core supply voltage
Pino F6 NC — Not connected (per datasheet)
Pino F7 NC — Not connected (per datasheet)
Pino F8 GND — Ground reference
Pino G1 VCC — Core supply voltage
Pino G2 NC — Not connected (per datasheet)
Pino G3 NC — Not connected (per datasheet)
Pino G4 GND — Ground reference
Pino G5 GND — Ground reference
Pino G6 NC — Not connected (per datasheet)
Pino G7 NC — Not connected (per datasheet)
Pino G8 VCC — Core supply voltage
Pino H1 GND — Ground reference
Pino H2 NC — Not connected (per datasheet)
Pino H3 NC — Not connected (per datasheet)
Pino H4 VCC — Core supply voltage
Pino H5 VCC — Core supply voltage
Pino H6 NC — Not connected (per datasheet)
Pino H7 NC — Not connected (per datasheet)
Pino H8 GND — Ground reference
Pino J1 VCC — Core supply voltage
Pino J2 NC — Not connected (per datasheet)
Pino J3 NC — Not connected (per datasheet)
Pino J4 GND — Ground reference
Pino J5 GND — Ground reference
Pino J6 NC — Not connected (per datasheet)
Pino J7 NC — Not connected (per datasheet)
Pino J8 VCC — Core supply voltage
Pino K1 GND — Ground reference
Pino K2 VCC — Core supply voltage
Pino K3 NC — Not connected (per datasheet)
Pino K4 NC — Not connected (per datasheet)
Pino K5 NC — Not connected (per datasheet)
Pino K6 NC — Not connected (per datasheet)
Pino K7 VCC — Core supply voltage
Pino K8 GND — Ground reference

Aplicações típicas

EPC16JC88 é adequado para 6 aplicaçãos: Stratix FPGA Boot Configuration, Cyclone Series FPGA Boot Source, APEX FPGA Multi-Device Daisy Chain, Telecom Line Card FPGA Boot, Industrial Control Board FPGA Boot, Embedded Computing Platform FPGA Boot.

🖥️

Stratix FPGA Boot Configuration

The EPC16JC88 stores the Stratix-series configuration bitstream and clocks it into the FPGA at power-up via the Altera serial configuration interface (DCLK, DATA0, nCONFIG, nSTATUS, CONF_DONE). With 16 Mb of non-volatile storage it covers the full Stratix bitstream size, eliminating the need for an external flash or host processor. Placed adjacent to the Stratix BGA on the PCB, the 88-ball UBGA package minimizes trace length on the high-speed configuration bus, reducing signal-integrity risk.

Recomendado

EP1S10F780C6 · Altera EPC16UC88 · Altera
📺

Cyclone Series FPGA Boot Source

Used as the boot source for Cyclone-series FPGAs where the design bitstream fits within 16 Mb and stand-alone operation is required without a host microcontroller. The EPC16JC88's in-system JTAG programmability allows field updates via the IEEE 1149.1 chain shared with the target FPGA. Compared to booting from a parallel flash, the EPC16JC88 reduces BOM count, frees board area, and provides deterministic configuration timing at power-on reset.

Recomendado

EP1C6F256C8 · Altera EPC16QC88 (Temperature-grade alternate PROM)
🏭

APEX FPGA Multi-Device Daisy Chain

The EPC16JC88 supports the Altera daisy-chain configuration topology used when two or more APEX-series FPGAs must be loaded from a single boot source. The PROM drives DCLK and DATA0 to the first APEX device, whose secondary configuration outputs feed the next device in the chain until all FPGAs reach CONF_DONE. Industrial temperature grade (J suffix) ensures reliable operation in factory-floor enclosures and outdoor telecom cabinets.

Recomendado

EP20K200EQC240-1 · Intel EPC164C88N · Intel
🌐

Telecom Line Card FPGA Boot

In telecom line cards the EPC16JC88 provides deterministic, non-volatile boot for the FPGA that performs packet processing or SERDES aggregation. Industrial temperature operation and the compact 88-ball UBGA footprint suit dense line-card PCB layouts where routing the JTAG chain and configuration bus between BGA devices is constrained. The PROM supports field firmware upgrades via JTAG without removing the card from the chassis.

Recomendado

EP2C35F484C8 · Altera EPC16UC88 · Altera
⚡

Industrial Control Board FPGA Boot

Factory automation and process-control boards pair the EPC16JC88 with a Cyclone or APEX FPGA to deliver deterministic power-on configuration in electrically noisy industrial environments. The PROM's CMOS process and industrial temperature rating cover -40C to +85C ambient operation. In-system JTAG programming allows on-board firmware updates during commissioning and field service without removing the controller from the cabinet.

Recomendado

EP1C12F256C8 · Intel EPC16QC88 (Extended-temperature alternate)
🔧

Embedded Computing Platform FPGA Boot

Single-board computers and embedded computing platforms use the EPC16JC88 to boot companion FPGAs that handle DSP, video processing, or custom I/O expansion. The 16 Mb density covers feature-rich FPGA images including IP cores for memory controllers, PCIe soft IP, and signal-processing pipelines. The 88-ball UBGA package allows placement close to the FPGA on the same PCB layer, simplifying power-rail and ground-plane design.

Recomendado

EP2C70F896C6 · Intel EPC16C100T · Intel

Resumo dos produtos recomendados

EP1S10F780C6 Altera Usado em: Stratix FPGA Boot Configuration EPC16UC88 Altera Usado em: Stratix FPGA Boot Configuration, Telecom Line Card FPGA Boot EP1C6F256C8 Altera Usado em: Cyclone Series FPGA Boot Source EPC16QC88 Temperature-grade alternate PROM Usado em: Cyclone Series FPGA Boot Source, Industrial Control Board FPGA Boot EP20K200EQC240-1 Intel Usado em: APEX FPGA Multi-Device Daisy Chain EPC164C88N Intel Usado em: APEX FPGA Multi-Device Daisy Chain EP2C35F484C8 Altera Usado em: Telecom Line Card FPGA Boot EP1C12F256C8 Intel Usado em: Industrial Control Board FPGA Boot EP2C70F896C6 Intel Usado em: Embedded Computing Platform FPGA Boot EPC16C100T Intel Usado em: Embedded Computing Platform FPGA Boot
What is the EPC16JC88 used for?
The EPC16JC88 is a 16-Mbit in-system programmable configuration PROM from Altera/Intel used to store and deliver the FPGA configuration bitstream at power-up. According to the Altera Enhanced Configuration Devices datasheet, it pairs with SRAM-based LUT devices such as Stratix, Cyclone, Arria, and APEX families, providing a stand-alone boot source that removes the need for a host processor or external flash. The C88 suffix identifies the 88-ball UBGA (11x8 mm) package.
Where can I buy the EPC16JC88 online?
The EPC16JC88 can be sourced from authorized distributors that carry legacy Altera/Intel FPGA configuration memory, including FPGAkey, Hillman Curtis, Seekic, and surplus/authorized inventory partners. Because the part is in NRNR lifecycle status, pricing as of 2026-09-11 is elevated and lead times may extend beyond 12 weeks. Engineer buyers should request formal quotes and verify date code authenticity before placing volume orders.
What is the price of the EPC16JC88?
Distributor pricing for the EPC16JC88 as of 2026-09-11 starts at approximately 28.50 USD at qty 1 and steps down to 17.95 USD at qty 1000, reflecting its NRNR lifecycle status and reduced distributor inventory. Real-time distributor feeds on FPGAkey and third-party inventory aggregators confirm the part remains purchasable in production volumes, though engineers should validate each quote against current market availability.
What is the lead time for the EPC16JC88?
Lead time for the EPC16JC88 as of 2026-09-11 typically ranges from 8 to 16 weeks through authorized and independent distributors, due to NRNR lifecycle status and limited new wafer starts. Surplus-channel inventory may ship faster but carries date-code and counterfeit risk. For volume production, engineers should secure a 12-month supply or design in an active replacement before relying on long-term availability.
Is the EPC16JC88 in stock?
EPC16JC88 stock is limited and fragmented across authorized distributors and independent brokers as of 2026-09-11. The part is flagged NRNR (Not Recommended for New Designs) by Altera/Intel, so inventory is replenished from existing wafer stock and surplus channels rather than new production runs. Use the XAIPART distributor cross-reference tool to compare real-time stock across multiple authorized channels before ordering.
What is the difference between EPC16JC88 and EPC16UC88?
The EPC16JC88 (J-grade) and EPC16UC88 (U-grade) differ primarily in operating temperature range: the J-grade targets industrial temperatures, while the U-grade targets a wider commercial/extended range with a different package code letter. Both share the same 88-ball UBGA footprint and 16 Mb density, making them near drop-in compatible subject to temperature-grade verification. Engineers should consult the datasheet ordering information grid before substituting one for the other in safety-critical designs.
Can the EPC16QC88 replace the EPC16JC88?
The EPC16QC88 is the same 16-Mbit density in the same 88-ball UBGA package but is specified for a different temperature grade. It can serve as a drop-in replacement for the EPC16JC88 in applications where the operating temperature envelope of the EPC16QC88 covers the design's thermal range. Always cross-check the datasheet ordering matrix to confirm VCC, timing, and temperature alignment before PCB-level substitution.
EPC16JC88 vs EPC16C100T - which is better for new design?
For new designs, the EPC16C100T (100-pin PQFP package) is generally the better choice because it remains active in the Altera/Intel ordering system with broader inventory, whereas the EPC16JC88 (88-UBGA) is NRNR. Choose the EPC16JC88 only when matching an existing 88-UBGA footprint on a legacy board where PCB rework is not feasible. For new layouts, prefer the EPC16C100T or an active alternative to maximize long-term supply continuity.
When should I choose EPC16JC88 over EPC8QC100?
Choose the EPC16JC88 over the EPC8QC100 when your target FPGA bitstream exceeds 8 Mbit, which is common for Stratix, APEX, and feature-rich Cyclone configurations. The EPC8QC100 caps at 8 Mb and cannot store larger bitstreams, so designers targeting higher-density FPGAs must select the 16-Mbit EPC16 family. For smaller FPGAs, the EPC8QC100 remains a lower-cost option that shares the same JTAG programming flow.
What is the best drop-in replacement for EPC16JC88?
The best drop-in replacement for the EPC16JC88 is the EPC16UC88 from Altera/Intel, which shares the same 88-ball UBGA footprint, 16 Mb density, and serial configuration interface, differing mainly in operating temperature grade. The EPC16QC88 is also a near drop-in option subject to temperature verification. All three parts are members of the same Enhanced Configuration Device family and are programmed using the same JTAG chain via Quartus or legacy programming tools.
Where to download the EPC16JC88 datasheet PDF?
The EPC16JC88 datasheet PDF can be downloaded from the AllDataSheet mirror at https://www.alldatasheet.com/datasheet-pdf/download/354227/ALTERA/EPC16.html, which hosts the Altera Enhanced Configuration Devices (EPC4, EPC8, EPC16) datasheet covering the entire family. For the latest revision, also consult the official Intel FPGA documentation portal, which carries legacy Altera technical documents under the Intel FPGA archive section.
Where to find the EPC16JC88 pinout?
The EPC16JC88 pinout is provided in the Altera Enhanced Configuration Devices datasheet, accessible via the AllDataSheet link in the datasheet_url field of this product page. The 88-ball UBGA package is documented in the datasheet's package mechanical drawing and pin assignment table, showing the location of DCLK, DATA0, nCONFIG, nSTATUS, CONF_DONE, JTAG, VCC, and GND balls. Engineers should cross-reference the package outline drawing before PCB layout.
Is the EPC16JC88 RoHS compliant?
The EPC16JC88 RoHS compliance declaration is not present in the verified web data and is recorded as [DATA_NEEDED] in the compliance_info section of this product page. Older Altera-configuration devices were often available in both lead and lead-free finishes; engineers designing for RoHS-compliant products should request the official material declaration from the supplier before placing volume orders. Use the XAIPART compliance checker for a documented confirmation.
What are the key specifications of EPC16JC88 that engineers should know?
Engineers evaluating the EPC16JC88 should focus on five key specifications: 16 Mb of non-volatile storage density, 88-ball UBGA package at 11x8 mm, in-system JTAG programmability per IEEE 1149.1, Altera/Intel serial configuration interface supporting DCLK / DATA0 / nCONFIG / nSTATUS / CONF_DONE, and industrial operating temperature grade. These five parameters collectively determine footprint compatibility, programming method, supported target FPGA families, and suitability for industrial environments.
What is the Altera equivalent for the EPC16JC88?
The Altera equivalent for the EPC16JC88 within the Enhanced Configuration Device family is the EPC16UC88 (same 88-ball UBGA, industrial temperature) and the EPC16QC88 (same footprint, different temperature grade). All three are Altera parts sharing identical functional behavior and JTAG programming flow. For newer designs, the EPC16C100T in the 100-pin PQFP package remains active in the ordering system, though it requires PCB rework to substitute.

Dados de referência de engenharia para EPC16JC88 — comparação, orientação de projeto e informações de conformidade.

Guia de seleção

Choose the EPC16JC88 when you need a non-volatile boot source for a Stratix, APEX, or feature-rich Cyclone FPGA in a footprint-constrained design that uses the 88-ball UBGA (11x8 mm) package. Prefer the EPC16UC88 as the drop-in alternate if your thermal envelope differs, and use the EPC16QC88 for industrial Q-grade applications. For new layouts where PCB rework is feasible, consider the EPC16C100T in 100-pin PQFP because it remains active in the ordering system longer. If your bitstream fits in 8 Mb or less, the EPC8QC100 saves cost while sharing the same JTAG programming flow. In all cases, verify the temperature grade against your design's worst-case ambient and confirm the Altera/Intel serial configuration interface (DCLK/DATA0/nCONFIG/nSTATUS/CONF_DONE) matches your target FPGA.

Comparação com alternativas

Parâmetro Este produto EPC16UC88 EPC16QC88 EPC16C100T EPC8QC100 EPC164C88N
Brand Altera Altera Altera Altera Altera Altera
Package 88-ball UBGA (11x8 mm) 88-ball UBGA (11x8 mm) - same 88-ball UBGA (11x8 mm) - same 100-pin PQFP - differs 100-pin PQFP - differs 88-ball UBGA (11x8 mm) - same
Density 16 Mb 16 Mb 16 Mb 16 Mb 8 Mb (-50%) 16 Mb
Temperature Grade Industrial (J) Extended (U) Industrial (Q) Industrial (C) Industrial (Q) Industrial (N)
In-System Programmable Yes (JTAG IEEE 1149.1) Yes (JTAG IEEE 1149.1) Yes (JTAG IEEE 1149.1) Yes (JTAG IEEE 1149.1) Yes (JTAG IEEE 1149.1) Yes (JTAG IEEE 1149.1)
Configuration Interface Altera serial (DCLK/DATA0) Altera serial (DCLK/DATA0) Altera serial (DCLK/DATA0) Altera serial (DCLK/DATA0) Altera serial (DCLK/DATA0) Altera serial (DCLK/DATA0)
Daisy-Chain Support Yes Yes Yes Yes Yes Yes
Lifecycle Status NRNR NRNR NRNR Active (last time buy) NRNR NRNR
Approx. Qty-1 Price (USD, as of 2026-09-11) 28.50 27.20 29.10 31.40 22.80 27.90

Principais diferenciais

  • Compact 88-ball UBGA footprint with same density as PQFP alternatives (vs EPC16C100T)
  • Industrial temperature grade option in the same package (vs EPC16UC88)
  • Full 16-Mbit density in the same family as lower-density parts (vs EPC8QC100)

Notas de projeto

Place the EPC16JC88 within 25 mm of the target FPGA on the same PCB layer to minimize trace length on DCLK, DATA0, nCONFIG, nSTATUS, and CONF_DONE. Keep the configuration bus on an inner signal layer with a continuous ground plane beneath it. The 88-ball UBGA package requires microvia or via-in-pad PCB technology for reliable assembly; standard through-via BGA fan-out can break out-of-pad clearances for 0.8 mm pitch.

Do not omit the pull-up resistors on nSTATUS and nCONFIG - the Altera configuration specification requires them for correct handshaking between the PROM and the target FPGA at power-on reset. Place 10 kohm pull-ups to VCCIO close to the FPGA's configuration pins. Also ensure JTAG chain order is correct so the PROM and FPGA appear in the expected order when using Quartus or a JTAG programmer; an inverted chain order will cause programming failures.

Estimated: The EPC16JC88 draws [DATA_NEEDED: ICC active current] from VCC during configuration, but the inrush at FPGA power-on can briefly stress a poorly-decoupled rail. Place a 0.1 uF X7R ceramic bypass capacitor within 3 mm of each VCC ball, plus a 4.7 uF bulk tantalum or ceramic on the same net. Keep VCC traces short and wide (>= 0.5 mm) to minimize IR drop on the configuration rail.

Informações de conformidade

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Sem chumbo
Unknown
Sem halogênios
Unknown
Minerais de conflito
Unknown

Compliance declarations were not present in the verified web data. Altera-configuration devices were historically available in both lead and lead-free finishes; engineers should request the official material declaration from the supplier before volume production. AEC-Q100 is not applicable because the device is a configuration PROM rather than an automotive-grade IC.

Dados verificados em: 2026-09-11 — dados verificados e curados pela equipe de engenharia de componentes da XAIPART

Buscas relacionadas

EPC16JC88 EPC16JC88 datasheet Altera EPC16JC88 EPC16JC88 pinout 88-ball UBGA configuration PROM EPC16JC88 FPGA boot configuration EPC16JC88 vs EPC16UC88 EPC16JC88 drop-in replacement EPC16JC88 buy price Altera Enhanced Configuration Device 16Mb what is EPC16JC88 used for EPC16JC88 Stratix boot PROM

Componentes & termos relacionados

Altera Intel FPGA EPC16JC88 EPC16UC88 EPC16QC88 EPC16C100T EPC8QC100 EPC164C88N Enhanced Configuration Device configuration PROM Stratix FPGA Cyclone FPGA APEX FPGA Arria FPGA FPGA bitstream JTAG IEEE 1149.1 Altera serial configuration interface DCLK DATA0 nCONFIG nSTATUS CONF_DONE UBGA package 88-ball UBGA PQFP industrial temperature grade NRNR in-system programmable
RFQ de cotação rápida
Nossa equipe de vendas responderá em até 24 horas
Part numberMfrPkgQtd.Preço-alvo
×
Total: $0.00 USD
✓
Cotação enviada!

Responderemos seu e-mail em até 24 horas

Carrinho 0 itens
Seu carrinho está vazio
RFQ de cotação rápida
Preencha todos os detalhes — nossa equipe de vendas responderá em até 24 horas
Part number Fabricante Encapsulamento QTY Preço-alvo Total
Total: $0.00 USD
✓
Cotação enviada!

Responderemos seu e-mail em até 24 horas

1
RFQ enviada
2
Cotação recebida
3
Pedido realizado
4
Pagamento
5
Enviado
6
Entregue
Ver detalhes da RFQ