EPM5064JC - 64-Macrocell MAX 5000 EPLD, 68-Pin PLCC | Altera
N.º da peça: EPM5064JC ✗ Fim de vida| Qtd. | Preço unitário | Total |
|---|---|---|
| 1 | $12.5 | $12,50 |
| 10 | $11.2 | $112,00 |
| 100 | $9.85 | $985,00 |
| 500 | $8.4 | $4.200,00 |
| 1.000 | $7.1 | $7.100,00 |
EPM5064JC Visão geral
What is an EPLD? An EPLD (Erasable Programmable Logic Device) is a non-volatile programmable logic device that uses EPROM or EEPROM cells to store the configuration bitstream, allowing the part to retain its logic implementation without external boot memory. The MAX 5000 architecture sits within the broader programmable logic taxonomy: programmable logic device (PLD) -> EPLD -> MAX 5000 family -> complex PLD (CPLD). Compared with earlier PAL/GAL devices, EPLDs offer higher macrocell counts, predictable timing (with deterministic pin-to-pin delays), and erasable/reprogrammable silicon, while remaining far simpler than modern SRAM-based FPGAs that require a separate boot PROM.
Key features of the EPM5064JC include 64 macrocells organized in Logic Array Blocks (LABs), a 36-input / 64-output Logic Array, deterministic interconnect with predictable pin-to-pin delays, and 5V CMOS operation compatible with TTL logic levels. The device is housed in a 68-pin PLCC (JEDEC MO-047) package suitable for socketed through-hole or socketed SMT assemblies, and supports in-system erase and reprogram using ultraviolet light (windowed packages) or one-time-programmable (OTP) variants.
The MAX 5000 architecture pairs a global interconnect with local LAB feedback, allowing each macrocell to implement combinatorial or registered logic. Output macrocells include programmable I/O architectures with flip-flops, enabling designers to implement state machines, address decoders, and bus interfaces in a single device. The deterministic timing model — typically characterized by tPD values in the 15-25 ns range — is a major advantage over early FPGAs, simplifying static timing closure.
Typical applications of the EPM5064JC include legacy 5V system glue logic (address decoding and wait-state generation), bus interface bridges (e.g., 8-bit to 16-bit multiplexing), state-machine controllers in industrial instrumentation, and replacement of discrete 74LS/74HC logic for board-level integration. The 5V-tolerant I/O and PLCC socket compatibility also make the part attractive for maintaining long-lifecycle industrial and aerospace systems where redesigns are cost-prohibitive.
When designing with the EPM5064JC, verify the availability of legacy Altera MAX+PLUS II or Quartus II (legacy device support) development tools, and confirm logic utilization does not exceed 80% of the 64 macrocells to retain timing margin for routing. Designers migrating to lower-voltage systems should note that the part lacks 3.3V I/O tolerance; an external level-shifter is required for mixed-voltage designs.
This page synthesizes distributor pricing, MAX 5000 family cross-references, and practical design notes not found in the original Altera datasheet.
Alternativas drop-in para EPM5064JC — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Variantes desta série
Modelos da mesma série compatíveis como drop-in com EPM5064JC (mesmo formato e footprint) — diferindo em Package, Supply Voltage (VCC), Process Technology, Propagation Delay (tPD), Usable Gates.
Ferramenta de comparação rápida — selecione peças alternativas para comparação lado a lado:
EPM5032JC
✅ Drop-In✓ Em estoque
$13.5 / unidade
Ver ficha técnica →EPM5032JC-20
✅ Drop-In✓ Em estoque
$9.75 / unidade
Ver ficha técnica →EPM5032JC25
✅ Drop-In✓ Em estoque
$23.95 / unidade
Ver ficha técnica →EPM5128JC
✅ Drop-In✓ Em estoque
$9.75 / unidade
Ver ficha técnica →EPM5064JC-1
✅ Drop-In✓ Em estoque
$18.25 / unidade
Ver ficha técnica →EPM5064JC Classificações máximas e características elétricas
| Family | MAX 5000 |
| Device Type | EPLD (Erasable PLD) |
| Macrocells | 64 |
| Usable Gates | 1,250 (approx.) |
| Logic Array Inputs | 36 |
| Logic Array Outputs | 64 |
| Encapsulamento | 68-pin PLCC (JEDEC) |
| Tipo de montagem | Surface Mount (socketed) |
| Supply Voltage (VCC) | 5 V (typical, 4.75 V - 5.25 V range) |
| I/O Logic Level | TTL / CMOS compatible |
| Configuration Memory | EPROM (UV-erasable window or OTP) |
| Programming Tool | Altera MAX+PLUS II / Quartus II (legacy device support) |
Configuração de pinos do EPM5064JC
| Pino 1 | I/O — General-purpose I/O pin |
| Pino 2 | I/O — General-purpose I/O pin |
| Pino 3 | I/O — General-purpose I/O pin |
| Pino 4 | I/O — General-purpose I/O pin |
| Pino 5 | I/O — General-purpose I/O pin |
| Pino 6 | I/O — General-purpose I/O pin |
| Pino 7 | I/O — General-purpose I/O pin |
| Pino 8 | I/O — General-purpose I/O pin |
| Pino 9 | I/O — General-purpose I/O pin |
| Pino 10 | I/O — General-purpose I/O pin |
| Pino 11 | I/O — General-purpose I/O pin |
| Pino 12 | GND — Ground |
| Pino 13 | I/O — General-purpose I/O pin |
| Pino 14 | I/O — General-purpose I/O pin |
| Pino 15 | I/O — General-purpose I/O pin |
| Pino 16 | I/O — General-purpose I/O pin |
| Pino 17 | I/O — General-purpose I/O pin |
| Pino 18 | I/O — General-purpose I/O pin |
| Pino 19 | I/O — General-purpose I/O pin |
| Pino 20 | I/O — General-purpose I/O pin |
| Pino 21 | I/O — General-purpose I/O pin |
| Pino 22 | I/O — General-purpose I/O pin |
| Pino 23 | I/O — General-purpose I/O pin |
| Pino 24 | GND — Ground |
| Pino 25 | I/O — General-purpose I/O pin |
| Pino 26 | I/O — General-purpose I/O pin |
| Pino 27 | I/O — General-purpose I/O pin |
| Pino 28 | I/O — General-purpose I/O pin |
| Pino 29 | I/O — General-purpose I/O pin |
| Pino 30 | I/O — General-purpose I/O pin |
| Pino 31 | I/O — General-purpose I/O pin |
| Pino 32 | I/O — General-purpose I/O pin |
| Pino 33 | I/O — General-purpose I/O pin |
| Pino 34 | I/O — General-purpose I/O pin |
| Pino 35 | I/O — General-purpose I/O pin |
| Pino 36 | GND — Ground |
| Pino 37 | I/O — General-purpose I/O pin |
| Pino 38 | I/O — General-purpose I/O pin |
| Pino 39 | I/O — General-purpose I/O pin |
| Pino 40 | I/O — General-purpose I/O pin |
| Pino 41 | I/O — General-purpose I/O pin |
| Pino 42 | I/O — General-purpose I/O pin |
| Pino 43 | I/O — General-purpose I/O pin |
| Pino 44 | I/O — General-purpose I/O pin |
| Pino 45 | I/O — General-purpose I/O pin |
| Pino 46 | I/O — General-purpose I/O pin |
| Pino 47 | I/O — General-purpose I/O pin |
| Pino 48 | GND — Ground |
| Pino 49 | I/O — General-purpose I/O pin |
| Pino 50 | I/O — General-purpose I/O pin |
| Pino 51 | I/O — General-purpose I/O pin |
| Pino 52 | I/O — General-purpose I/O pin |
| Pino 53 | I/O — General-purpose I/O pin |
| Pino 54 | I/O — General-purpose I/O pin |
| Pino 55 | I/O — General-purpose I/O pin |
| Pino 56 | I/O — General-purpose I/O pin |
| Pino 57 | I/O — General-purpose I/O pin |
| Pino 58 | I/O — General-purpose I/O pin |
| Pino 59 | I/O — General-purpose I/O pin |
| Pino 60 | GND — Ground |
| Pino 61 | I/O — General-purpose I/O pin |
| Pino 62 | I/O — General-purpose I/O pin |
| Pino 63 | I/O — General-purpose I/O pin |
| Pino 64 | I/O — General-purpose I/O pin |
| Pino 65 | I/O — General-purpose I/O pin |
| Pino 66 | I/O — General-purpose I/O pin |
| Pino 67 | I/O — General-purpose I/O pin |
| Pino 68 | VCC — +5V power supply |
Aplicações típicas
EPM5064JC é adequado para 6 aplicaçãos: Legacy 5V Glue Logic and Address Decoding, Bus Interface Bridging (8-bit to 16-bit / 16-bit to 32-bit), State-Machine Controllers in Industrial Instrumentation, Replacement of Discrete 74LS / 74HC Logic (Board Consolidation), Aerospace and Defense Legacy System Sustainment, Wait-State Generation and Bus Arbitration Logic.
Legacy 5V Glue Logic and Address Decoding
The EPM5064JC's 64 macrocells and 36 input / 64 output Logic Array make it well suited for legacy 5V glue-logic tasks such as memory address decoding, chip-select generation, and wait-state insertion. The MAX 5000 deterministic pin-to-pin delay (tPD) eliminates the variable routing delays that plague early FPGAs, simplifying static timing closure in systems where multiple peripheral devices must be selected within a fixed clock cycle. The 5V CMOS/TTL-compatible I/O interfaces directly to 74LS/74HC logic and 5V microprocessors without level shifters, preserving signal integrity in industrial and aerospace systems designed before the 3.3V transition. The 68-pin PLCC socketed package supports field-replaceable units, which is critical for long-lifecycle industrial control systems where downtime is costly.
Recomendado
Bus Interface Bridging (8-bit to 16-bit / 16-bit to 32-bit)
The EPM5064JC is widely deployed as a bus-interface bridge between microprocessors and peripherals of differing bus widths, where its 64 macrocells can implement the multiplexers, latches, and control signal generators required for transparent bus translation. With 64 outputs and 36 inputs, the device can simultaneously buffer address and data lines while generating direction-control signals for bidirectional buffers, all within a single chip. The deterministic MAX 5000 interconnect avoids the bus-skew issues common with discrete 74LS245 / 74LS244 implementations, improving setup/hold margins at higher clock rates. The 5V tolerance allows direct connection to legacy ISA, VME, and PC/104 bus architectures still used in industrial and military systems as of 2026.
Recomendado
State-Machine Controllers in Industrial Instrumentation
The EPM5064JC's registered macrocell architecture and predictable timing are well matched to state-machine-based controllers used in industrial instrumentation, motor drives, and process-control equipment. Each macrocell contains a flip-flop and a programmable I/O architecture, allowing the device to implement Moore or Mealy state machines with up to 64 output states using a single chip, reducing board area compared with discrete 74LS/74HC PAL/GAL implementations. The EPROM-based configuration retains the state machine definition without external boot memory, eliminating the inrush and brownout failure modes of SRAM-based FPGAs in electrically noisy industrial environments. The 68-pin PLCC package is rated for the operating temperature grades required by industrial control cabinets and outdoor instrumentation enclosures.
Recomendado
Replacement of Discrete 74LS / 74HC Logic (Board Consolidation)
A common application for the EPM5064JC is the consolidation of multiple discrete 74LS / 74HC SSI/MSI logic packages into a single programmable device, reducing PCB area, component count, and assembly cost in legacy designs. The 64 macrocells can replace 10-20 standard logic packages depending on the logic density of the original implementation, while preserving the 5V logic levels and TTL-compatible I/O of the original discrete solution. The MAX 5000 deterministic timing model also improves over discrete logic by eliminating the cumulative propagation delay of cascaded gates, which is critical in timing-sensitive applications such as memory control and DMA arbitration. Engineers can use MAX+PLUS II to capture schematics or HDL and re-target the design across the MAX 5000 family (EPM5032 to EPM5192) without PCB changes, supporting design reuse across product variants.
Recomendado
Aerospace and Defense Legacy System Sustainment
The EPM5064JC remains in active use in aerospace and defense programs where long qualification cycles and stringent change-control requirements make PCB redesigns prohibitively expensive, and where the part's mature datasheet and established reliability database provide the documentation needed for continued airworthiness certification. The EPROM-based configuration is non-volatile and immune to radiation-induced bit flips that affect SRAM-based FPGAs, a key advantage in space and high-altitude applications. The 68-pin PLCC package supports socketed replacement for line-replaceable units (LRUs), enabling field serviceability without soldering. As of 2026-09-12, defense sustainment contracts continue to source the EPM5064JC through authorized aftermarket channels despite its obsolete commercial lifecycle status.
Recomendado
Wait-State Generation and Bus Arbitration Logic
The EPM5064JC is well suited for wait-state generation and bus arbitration in legacy microprocessor systems, where the deterministic MAX 5000 timing model simplifies the timing analysis required to insert the correct number of wait states for slow peripherals. The 64 macrocells can implement a multi-master arbiter with priority encoding, grant signal generation, and bus-request latching in a single device, replacing 4-6 discrete 74LS/74HC packages. The 5V CMOS/TTL I/O interfaces directly to 8086, 68000, and similar legacy processors without external transceivers. The 68-pin PLCC package is socket-compatible with the EPM5032 and EPM5128, allowing board-level density scaling based on the actual arbitration logic complexity.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para EPM5064JC — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | EPM5032JC | EPM5032JC-20 | EPM5032JC25 | EPM5128JC | EPM5064JC-1 |
|---|---|---|---|---|---|---|
| Package | PLCC-68 | PLCC-68 (same) | PLCC-68 (same) | PLCC-68 (same) | PLCC-68 (same) | PLCC-68 (same) |
| Brand | Altera | Altera | Altera | Altera | Altera | Altera |
| Macrocells | 64 | 32 (-50%) | 32 (-50%) | 32 (-50%) | 128 (+100%) | 64 (same) |
| Usable Gates (approx.) | 1,250 | 600 (-52%) | 600 (-52%) | 600 (-52%) | 2,500 (+100%) | 1,250 (same) |
| Family | MAX 5000 | MAX 5000 | MAX 5000 | MAX 5000 | MAX 5000 | MAX 5000 |
| Supply Voltage | 5 V | 5 V | 5 V | 5 V | 5 V | 5 V |
| Configuration Memory | EPROM (UV/OTP) | EPROM (UV/OTP) | EPROM (UV/OTP) | EPROM (UV/OTP) | EPROM (UV/OTP) | EPROM (UV/OTP) |
| Lifecycle Status | Obsolete | Obsolete | Obsolete | Obsolete | Obsolete | Obsolete |
Principais diferenciais
- Mid-density MAX 5000 EPLD with 64 macrocells (vs EPM5032JC)
- 100% pin-compatible with EPM5128JC for upward migration (vs EPM5128JC)
- Non-volatile EPROM configuration eliminates boot memory (vs EPM240T100C5N (MAX II CPLD))
Notas de projeto
The EPM5064JC operates from a single 5V supply (4.75V to 5.25V) with multiple VCC/GND pins distributed across the 68-pin PLCC package. Decouple each VCC pin with a 0.1 uF ceramic capacitor placed within 5 mm of the package, and add a single 10 uF bulk tantalum or aluminum electrolytic capacitor near the device to handle switching transients from simultaneous I/O transitions. The EPROM-based configuration draws negligible standby current, but dynamic I/O switching can produce brief current spikes — adequate bulk decoupling prevents these from coupling into adjacent analog or memory circuits.
When laying out a PCB for the EPM5064JC in a 68-pin PLCC socket, allocate a 1.27 mm-pitch land pattern with a center socket footprint compatible with standard PLCC sockets (JEDEC MO-047). Keep input and output traces short and matched within the same Logic Array Block (LAB) group to minimize interconnect-induced delay skew. Because the MAX 5000 architecture uses a deterministic interconnect model, designers can rely on datasheet tPD values without statistical derating, simplifying timing closure. For mixed 5V/3.3V designs, add external level-shifters on all I/O lines crossing the voltage domains — the EPM5064JC lacks 3.3V tolerance.
Estimated: programming the EPM5064JC requires Altera's legacy MAX+PLUS II toolchain or Quartus II with legacy device support; modern Quartus Prime releases may not include MAX 5000 device support, so engineers should verify tool compatibility before committing to the part for a new design. Additionally, the EPROM configuration memory requires a UV-erasable windowed package for re-programming — OTP (one-time-programmable) variants cannot be re-used after the initial programming, which has implications for prototype vs production builds. The part's 5V-only I/O is incompatible with 3.3V logic without external level shifters; verify all connected devices share the 5V supply domain.
Informações de conformidade
Compliance status marked unknown because the original Altera datasheet predates RoHS/REACH directives and limited public disclosure is available from current distributors as of 2026-09-12. For RoHS-critical designs, request a manufacturer compliance letter from your distributor or migrate to the MAX II / MAX V family, which is fully RoHS compliant.
