EPM5192AJC84-15 - MAX 5000 CPLD, 192 Macrocells, 84-pin PLCC | Altera
N.º da peça: EPM5192AJC84-15 ✗ Fim de vida| Qtd. | Preço unitário | Total |
|---|---|---|
| 1 | $38.5 | $38,50 |
| 10 | $32.75 | $327,50 |
| 100 | $26.4 | $2.640,00 |
| 500 | $22.1 | $11.050,00 |
| 1.000 | $18.95 | $18.950,00 |
EPM5192AJC84-15 Visão geral
A CPLD (Complex Programmable Logic Device) is a non-volatile programmable logic IC that sits between simple SPLDs/GALs and large FPGAs in the programmable logic hierarchy (SPLD -> CPLD -> FPGA -> programmable logic). It typically contains multiple PAL-like logic blocks interconnected by a central programmable switch matrix, with non-volatile storage that retains configuration without external memory. The MAX 5000 family was Altera's second-generation high-density EPLD line (the second 'M' family), succeeding the classic MAX 7000 and MAX 3000 lines that became industry workhorses for bus-interface and address-decoding glue logic.
Key features include 192 macrocells (each containing a programmable AND/OR array with a flip-flop), 5V CMOS technology, UV-erasable windowed package for re-programmability, and pin-to-pin compatibility across the MAX 5000 series. The 15 ns propagation delay supports synchronous designs up to the rated 83.3 MHz fMAX, and the device supports both combinatorial and registered logic through its macrocell register option.
Architecturally, the EPM5192 uses a classic sum-of-products PLA structure with a global interconnect matrix that delivers consistent, deterministic timing across all 192 macrocells. The CMOS EPROM-based configuration cell stores the logic pattern, and the ceramic windowed package (designated 'JC' with quartz window for UV erasure) is intended primarily for prototype development; production units typically migrate to the plastic 'PC' one-time-programmable package.
Typical applications include bus address decoding, state-machine controllers, glue logic between microprocessors and peripherals, and legacy industrial-control designs. The wide 5V tolerance also makes it useful as a level shifter between TTL and CMOS logic families on legacy backplanes.
When designing with the EPM5192, ensure the 5V VCC rail is well-decoupled with 0.1 uF ceramic capacitors near each supply pin, and verify that all inputs respect the 5.5V absolute maximum rating. For new designs, consider that the MAX 5000 family is mature/EOL — confirm long-term availability before committing to volume production.
This page synthesizes distributor stock data, parametric drop-in alternatives, and practical MAX 5000 design notes not collected in any single manufacturer datasheet.
Alternativas drop-in para EPM5192AJC84-15 — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Variantes desta série
Modelos da mesma série compatíveis como drop-in com EPM5192AJC84-15 (mesmo formato e footprint) — diferindo em Package, Mounting Type, Device Type, Supply Voltage (VCC), Process Technology.
Ferramenta de comparação rápida — selecione peças alternativas para comparação lado a lado:
EPM5192AGC84-15
✅ Drop-In✓ Em estoque
$42 / unidade
Ver ficha técnica →EPM5192AJC84-25
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
EPM5192AJC-15
✅ Drop-In✓ Em estoque
$9.85 / unidade
Ver ficha técnica →EPM5192AGC84-20
✅ Drop-In✓ Em estoque
$41.2 / unidade
Ver ficha técnica →EPM5192AGC-15
✅ Drop-In✓ Em estoque
$27.8 / unidade
Ver ficha técnica →ATF1508JI84-15
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
EPM5192AJC84-15 Classificações máximas e características elétricas
| Family | MAX 5000 |
| Device Type | EPLD (Erasable Programmable Logic Device) |
| Macrocells | 192 |
| Propagation Delay (tpd) | 15 ns |
| Maximum Clock Frequency (fMAX) | 83.3 MHz |
| Supply Voltage (VCC) | 5 V (single supply) |
| Technology | CMOS, UV-erasable EPROM |
| Encapsulamento | 84-pin PLCC (J84C) windowed ceramic |
| Tipo de montagem | Surface Mount |
| Programming Method | UV-erase + EPROM programming (windowed package) |
| Logic Blocks | 16 Logic Array Blocks (LABs) |
| Status RoHS | Non-compliant (contains Pb, ceramic windowed package) |
| Process Technology | CMOS EPROM |
Configuração de pinos do EPM5192AJC84-15
| Pino 1 | I/O — User I/O pin (macrocell input or output) |
| Pino 2 | I/O — User I/O pin |
| Pino 3 | I/O — User I/O pin |
| Pino 4 | I/O — User I/O pin |
| Pino 5 | I/O — User I/O pin |
| Pino 6 | I/O — User I/O pin |
| Pino 7 | I/O — User I/O pin |
| Pino 8 | I/O — User I/O pin |
| Pino 9 | I/O — User I/O pin |
| Pino 10 | I/O — User I/O pin |
| Pino 11 | GND — Ground |
| Pino 12 | I/O — User I/O pin |
| Pino 13 | I/O — User I/O pin |
| Pino 14 | I/O — User I/O pin |
| Pino 15 | I/O — User I/O pin |
| Pino 16 | I/O — User I/O pin |
| Pino 17 | I/O — User I/O pin |
| Pino 18 | I/O — User I/O pin |
| Pino 19 | I/O — User I/O pin |
| Pino 20 | I/O — User I/O pin |
| Pino 21 | I/O — User I/O pin |
| Pino 22 | VCC — 5V supply |
| Pino 23 | I/O — User I/O pin |
| Pino 24 | I/O — User I/O pin |
| Pino 25 | I/O — User I/O pin |
| Pino 26 | I/O — User I/O pin |
| Pino 27 | I/O — User I/O pin |
| Pino 28 | I/O — User I/O pin |
| Pino 29 | I/O — User I/O pin |
| Pino 30 | I/O — User I/O pin |
| Pino 31 | I/O — User I/O pin |
| Pino 32 | I/O — User I/O pin |
| Pino 33 | GND — Ground |
| Pino 34 | I/O — User I/O pin |
| Pino 35 | I/O — User I/O pin |
| Pino 36 | I/O — User I/O pin |
| Pino 37 | I/O — User I/O pin |
| Pino 38 | I/O — User I/O pin |
| Pino 39 | I/O — User I/O pin |
| Pino 40 | I/O — User I/O pin |
| Pino 41 | I/O — User I/O pin |
| Pino 42 | I/O — User I/O pin |
| Pino 43 | I/O — User I/O pin |
| Pino 44 | VCC — 5V supply |
| Pino 45 | I/O — User I/O pin |
| Pino 46 | I/O — User I/O pin |
| Pino 47 | I/O — User I/O pin |
| Pino 48 | I/O — User I/O pin |
| Pino 49 | I/O — User I/O pin |
| Pino 50 | I/O — User I/O pin |
| Pino 51 | I/O — User I/O pin |
| Pino 52 | I/O — User I/O pin |
| Pino 53 | I/O — User I/O pin |
| Pino 54 | I/O — User I/O pin |
| Pino 55 | GND — Ground |
| Pino 56 | I/O — User I/O pin |
| Pino 57 | I/O — User I/O pin |
| Pino 58 | I/O — User I/O pin |
| Pino 59 | I/O — User I/O pin |
| Pino 60 | I/O — User I/O pin |
| Pino 61 | I/O — User I/O pin |
| Pino 62 | I/O — User I/O pin |
| Pino 63 | I/O — User I/O pin |
| Pino 64 | I/O — User I/O pin |
| Pino 65 | I/O — User I/O pin |
| Pino 66 | VCC — 5V supply |
| Pino 67 | I/O — User I/O pin |
| Pino 68 | I/O — User I/O pin |
| Pino 69 | I/O — User I/O pin |
| Pino 70 | I/O — User I/O pin |
| Pino 71 | I/O — User I/O pin |
| Pino 72 | I/O — User I/O pin |
| Pino 73 | I/O — User I/O pin |
| Pino 74 | I/O — User I/O pin |
| Pino 75 | I/O — User I/O pin |
| Pino 76 | I/O — User I/O pin |
| Pino 77 | GND — Ground |
| Pino 78 | I/O — User I/O pin |
| Pino 79 | I/O — User I/O pin |
| Pino 80 | I/O — User I/O pin |
| Pino 81 | I/O — User I/O pin |
| Pino 82 | I/O — User I/O pin |
| Pino 83 | I/O — User I/O pin |
| Pino 84 | I/O — User I/O pin |
Aplicações típicas
EPM5192AJC84-15 é adequado para 6 aplicaçãos: Legacy Bus Address Decoding, State Machine Controllers, 5V TTL-to-CMOS Level Shifting, Avionics and Military Systems, Industrial PLC and Process Control, Retro Computing and Arcade Hardware.
Legacy Bus Address Decoding
The EPM5192AJC84-15's 192 macrocells and 15 ns propagation delay make it well-suited for legacy microprocessor bus address decoding on ISA, VME, and Multibus backplanes. With 16 Logic Array Blocks, designers can implement complex chip-select and interrupt-acknowledge logic for multiple peripherals without discrete TTL glue, and the 5V CMOS I/O tolerates the 5V TTL levels common on legacy CPU buses. The 83.3 MHz fMAX comfortably handles 33 MHz VMEbus and 25 MHz Multibus cycles. Replace this part with the EPM5192AGC84-15 for volume production; the OTP package removes the UV-erase window, reducing cost and improving mechanical robustness.
Recomendado
State Machine Controllers
Implementing Moore or Mealy state machines with up to 192 states is straightforward in the EPM5192AJC84-15 thanks to its registered macrocell architecture with configurable flip-flops. The 15 ns tpd and 83.3 MHz fMAX support real-time control loops in industrial automation, sequencing stepper motors or process-control valves where deterministic timing is mandatory. The UV-erasable windowed package allows rapid prototype iteration during state-table development. For production migration, the EPM5192AGC84-15 in plastic OTP packaging provides identical electrical behavior in the same 84-pin PLCC footprint.
Recomendado
5V TTL-to-CMOS Level Shifting
The EPM5192AJC84-15's 5V-tolerant CMOS inputs and TTL-compatible output thresholds make it an ideal bidirectional level shifter between 5V TTL logic on legacy backplanes and 5V CMOS peripherals. Designers can implement 8-bit or 16-bit wide bus transceivers in a single device using the macrocell flip-flops for direction control. The 15 ns propagation delay adds minimal latency to data-path signals, while the 192 macrocells accommodate bidirectional enable logic alongside the data path. The PLCC package's through-hole-style leads also simplify rework on legacy through-hole-and-bridge PCBs.
Recomendado
Avionics and Military Systems
The EPM5192AJC84-15 in its windowed ceramic PLCC package operates over the military temperature range (-55 C to +125 C), making it qualified for avionics, weapons-system controllers, and legacy radar signal-processing backplanes. The non-volatile EPROM-based configuration eliminates the need for external boot PROMs that flash-based CPLDs require, improving single-event-upset tolerance in radiation environments. The 192 macrocells support small-to-medium control functions such as mux/demux logic, interrupt controllers, and ARINC 429 interface glue. For new military designs, verify the current MIL-PRF-38535 QML status with the broker before procurement.
Recomendado
Industrial PLC and Process Control
Programmable Logic Controllers (PLCs) built in the 1990s often integrated MAX 5000 devices like the EPM5192AJC84-15 for ladder-logic-to-discrete-I/O mapping and high-speed counter/timer functions. The 192 macrocells support 32-bit counter accumulators, quadrature decoders, and PWM generator channels with deterministic 15 ns timing. The 5V supply matches the PLC backplane, and the UV-erase window allowed field service technicians to reprogram logic on-site. Today, these parts keep legacy Allen-Bradley, Siemens, and ABB PLCs running when modern replacements are unavailable.
Recomendado
Retro Computing and Arcade Hardware
Vintage arcade boards, retro-computing mainboards, and 1990s-era game-console peripherals frequently use MAX 5000 CPLDs like the EPM5192AJC84-15 for graphics-tile decoding, sprite priority logic, and sound-chip multiplexing. Hobbyists restoring these boards benefit from the UV-erasable window, which allows reprogramming when bugs are discovered in the original design. The 5V CMOS I/O matches TTL-era logic families such as 74LS and 74F. The 84-pin PLCC through-hole-style footprint is also easy to socket for easy swap-out during debugging.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para EPM5192AJC84-15 — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | EPM5192AGC84-15 | EPM5192AJC84-25 | EPM5192AJC-15 | EPM5192AGC84-20 | ATF1508JI84-15 |
|---|---|---|---|---|---|---|
| Package | 84-pin PLCC windowed ceramic (JC84) | 84-pin PLCC plastic OTP (AGC84) - same footprint | 84-pin PLCC windowed ceramic (JC84) - same | 68-pin PLCC (different footprint) | 84-pin PLCC plastic OTP (AGC84) - same | 84-pin PLCC (same footprint, fewer macrocells) |
| Brand | Altera (Intel) | Altera (Intel) | Altera (Intel) | Altera (Intel) | Altera (Intel) | Microchip Technology |
| Macrocells | 192 | 192 | 192 | 192 | 192 | 128 (-33%) |
| Propagation Delay | 15 ns | 15 ns | 25 ns (+67%) | 15 ns | 20 ns (+33%) | 15 ns |
| Package Type | Windowed ceramic (UV-erasable) | Plastic OTP (one-time programmable) | Windowed ceramic (UV-erasable) | Windowed ceramic | Plastic OTP | Plastic flash (reprogrammable in-circuit) |
| Programming Technology | EPROM (UV-erase) | EPROM (OTP) | EPROM (UV-erase) | EPROM (UV-erase) | EPROM (OTP) | Flash (in-system reprogrammable) |
| Supply Voltage | 5 V | 5 V | 5 V | 5 V | 5 V | 5 V |
| Maximum Clock Frequency | 83.3 MHz | 83.3 MHz | 50 MHz (-40%) | 83.3 MHz | 62.5 MHz (-25%) | 83.3 MHz |
| RoHS Compliance | Non-compliant (Pb ceramic) | Non-compliant (Pb ceramic) | Non-compliant (Pb ceramic) | Non-compliant (Pb ceramic) | Non-compliant (Pb ceramic) | Compliant |
Principais diferenciais
- UV-erasable windowed ceramic package enables >100 reprogramming cycles (vs EPM5192AGC84-15)
- Fastest 15 ns speed grade in the EPM5192 family (vs EPM5192AJC84-25)
- 192 macrocells - highest density in the MAX 5000 family (vs ATF1508JI84-15)
Notas de projeto
Estimated: the EPM5192AJC84-15 draws approximately 200-300 mA from the 5V VCC rail when all 192 macrocells are switching at 83.3 MHz, depending on toggle rate. Place a 0.1 uF ceramic decoupling capacitor within 5 mm of each VCC pin (3 pins: 22, 44, 66) and a bulk 10 uF tantalum or 22 uF ceramic on the PLCC socket itself. The three GND pins (11, 33, 55, 77) must all be connected to a low-impedance ground plane; floating a GND pin will cause logic errors and possible latch-up on 5V CMOS inputs.
Do not attempt to reprogram a windowed ceramic EPM5192AJC84-15 without first removing any conformal coating or label from the quartz window - UV erasure requires direct exposure. UV erase time is typically 20-30 minutes under a 12,000 uW/cm2W UV lamp at 253.7 nm. Reprogramming voltage VPP=12.5V must be applied per the Altera programming algorithm; modern USB programmers support this via the Altera MAX 5000 device library.
The 84-pin PLCC windowed ceramic package has a thermal resistance (theta_JA) of approximately 35 C/W in still air. Estimated: at full toggle rate the junction temperature rise is 10-15 C above ambient, well within the 125 C military limit. No heatsink is required, but provide 100+ square cm of copper ground plane to keep junction temperatures conservative in enclosed industrial enclosures.
Use a through-hole PLCC socket (e.g. 84-pin Tyco/Amp 822473-1) for prototype work to allow easy swap-out during debugging. For production, direct surface-mount soldering is acceptable but the plastic PLCC leads can fracture under thermal cycling - consider an underfill if the design will experience >500 thermal cycles. Keep high-speed signals (fMAX > 50 MHz) on the inner signal layers to control EMI.
Informações de conformidade
Non-RoHS due to Pb-containing ceramic windowed package. AEC-Q100 not applicable - this is a programmable logic device, not an automotive-grade IC. Verify current compliance status with broker for obsolete stock.
