EPM9560RC240-15N - MAX 9000 CPLD, 560 Macrocells, 15ns, RQFP-240
N.º da peça: EPM9560RC240-15N ✗ Fim de vida| Qtd. | Preço unitário | Total |
|---|---|---|
| 1 | $48.5 | $48,50 |
| 10 | $42.75 | $427,50 |
| 100 | $36.2 | $3.620,00 |
| 500 | $31.4 | $15.700,00 |
| 1.000 | $27.85 | $27.850,00 |
EPM9560RC240-15N Visão geral
A CPLD (Complex Programmable Logic Device) is a non-volatile, flash- or EEPROM-backed programmable logic device that sits hierarchically between simple SPLDs (e.g., GAL/PAL) and FPGAs. CPLDs are characterized by deterministic timing, instant-on behavior, high pin counts, and very low power consumption in standby, making them the preferred choice for system-level address decoding, bus arbitration, peripheral control, and power-sequencing logic. The MAX architecture walks up the taxonomy as: macrocell -> Logic Array Block (LAB) -> CPLD -> programmable logic -> semiconductor device.
Key features of the EPM9560RC240-15N include 35 Logic Array Blocks (LABs), 5.0 V in-system programmability (ISP) via IEEE 1532/JTAG, JTAG boundary-scan test support, open-drain or programmable I/O standards, and a commercial operating-temperature range of 0C to 70C. The non-volatile EEPROM configuration cell removes the need for external boot PROMs, enabling single-chip designs with instant-on functionality at system power-up.
Architecturally, the MAX 9000 device uses a continuous interconnect network called the Programmable Interconnect Array (PIA), which routes every LAB to every other LAB through a uniform, predictable switch matrix. Combined with the EEPROM process node, this delivers 100% interconnect utilization with no contention, predictable tPD regardless of design placement, and true pin-locking that survives design iterations without re-routing PCB traces.
Typical applications of the EPM9560RC240-15N include 32-bit/64-bit microprocessor peripheral decoding (PCI, VME, ISA), high-speed state-machine controllers, bus arbiters and protocol bridges, industrial PLC I/O expansion, and legacy glue-logic replacement. The wide I/O count (216 pins) supports designs requiring many chip-select, interrupt, or peripheral-control signals.
Designers should note that the EPM9560RC240-15N is an NRND/EOL-era part; production status should be confirmed with the manufacturer. For new designs, the MAX II or MAX V CPLD families are recommended; pin-compatible drop-in alternatives within the MAX 9000 family (same RQFP-240 footprint) include the speed-grade and temperature-grade variants EPM9560RC240-15, EPM9560RC240-12, and EPM9560RC240-10N.
This page synthesizes distributor pricing, drop-in same-footprint alternatives from the Site MPN list, and practical design notes not found in the manufacturer datasheet alone, providing engineers and procurement teams with a single consolidated reference.
Alternativas drop-in para EPM9560RC240-15N — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Variantes desta série
Modelos da mesma série compatíveis como drop-in com EPM9560RC240-15N (mesmo formato e footprint) — diferindo em Package, Family, User I/O Pins, Device Type, Logic Array Blocks (LABs).
Ferramenta de comparação rápida — selecione peças alternativas para comparação lado a lado:
EPM9560RC240-15
✅ Drop-In✓ Em estoque
$174.72 / unidade
Ver ficha técnica →EPM9560RC240-12
✅ Drop-In✓ Em estoque
$9.95 / unidade
Ver ficha técnica →EPM9560RC240-10N
✅ Drop-In✓ Em estoque
$168 / unidade
Ver ficha técnica →EPM9560RC240-15C
✅ Drop-In✓ Em estoque
Consulte o preço
Ver ficha técnica →EPM9560RC240-10
✅ Drop-In✓ Em estoque
Consulte o preço
Ver ficha técnica →EPM9560RC240-15N Classificações máximas e características elétricas
| Series | MAX 9000 |
| Family | MAX 9000 (third-generation Multiple Array MatriX) |
| Usable Gates | 12,000 |
| Macrocells | 560 |
| Logic Array Blocks (LABs) | 35 |
| Maximum User I/O Pins | 216 |
| Pin-to-Pin Propagation Delay (tPD) | 15 ns |
| Internal Counter Frequency (fCNT) | 145 MHz |
| Tensão de alimentação | 5.0 V |
| Logic Family | CMOS (EEPROM-based) |
| Programmability | In-system programmable (IEEE 1532/JTAG) |
| Boundary-Scan Test | JTAG (IEEE 1149.1) |
| Temperatura de operação | 0C to +70C (Commercial) |
| Encapsulamento | RQFP-240 (240-pin Plastic Quad Flat Pack) |
| Tipo de montagem | Surface Mount |
Guia de Configuração de Pinos do EPM9560RC240-15N rqfp-240 (240-pin plastic quad flat pack)
Configuração de pinos para EPM9560RC240-15N (pacote rqfp-240 (240-pin plastic quad flat pack)). Este CI digital inclui GPIO, interfaces de comunicação (UART, SPI, I2C) e pinos de alimentação. Consulte o datasheet do fabricante para funções alternativas dos pinos e opções de configuração. Essencial para projeto de sistemas embarcados e layout de PCB.
Nenhum dado detalhado de pinagem disponível para EPM9560RC240-15N.
Consulte a ficha técnica para a configuração completa dos pinos.
Aplicações típicas
EPM9560RC240-15N é adequado para 6 aplicaçãos: 32-bit Microprocessor Peripheral Decoding, High-Speed State-Machine Controllers, Bus Arbiters and Protocol Bridges, Industrial PLC I/O Expansion, Legacy Glue-Logic Replacement, Telecom Backplane Interface Logic.
32-bit Microprocessor Peripheral Decoding
The EPM9560RC240-15N is well suited for 32-bit microprocessor peripheral-decoding tasks such as PCI, VME, and ISA bus chip-select generation. Its 560 macrocells and 216 user I/O pins can simultaneously decode dozens of address ranges, while the deterministic 15 ns tPD over the PIA interconnect ensures that chip-select signals arrive within the peripheral's access window. The 5.0 V I/O bank interfaces directly with 5 V peripherals and TTL decoder logic without level shifters, simplifying board design and reducing BOM cost in legacy 5 V microprocessor systems.
Recomendado
High-Speed State-Machine Controllers
With 560 macrocells organized into 35 Logic Array Blocks and a 145 MHz fCNT internal counter frequency, the EPM9560RC240-15N can implement multi-state FSMs running at tens of megahertz with deterministic one-clock-cycle state transitions. The EEPROM-based non-volatile configuration makes it ideal for mission-critical controllers that must wake up in a defined state at power-on, such as industrial machine-tool sequencers and avionics interface controllers. The deterministic 15 ns tPD guarantees that outputs settle before the next clock edge, eliminating metastability risk in feedback paths.
Recomendado
Bus Arbiters and Protocol Bridges
The EPM9560RC240-15N serves as a flexible bus arbiter and protocol bridge in mixed-bus systems, where it can map between PCI, VME, ISA, and proprietary backplane protocols. Its 216 I/O pins accommodate wide parallel data buses, while the 35 LABs allow multiple arbitration trees (round-robin, priority, daisy-chain) to coexist in a single device. JTAG boundary-scan support enables board-level interconnect testing of the bridge, a critical feature for high-reliability medical, aerospace, and industrial systems where protocol mismatch can cause silent data corruption.
Recomendado
Industrial PLC I/O Expansion
In industrial PLC and process-control systems, the EPM9560RC240-15N expands the I/O count of a CPU module by multiplexing digital inputs, conditioning signals, and generating isolated drive waveforms. The 216 user I/O pins support a high-channel-count PLC rack (typically 128-192 channels) with per-channel configuration stored in the non-volatile EEPROM. Industrial-grade noise immunity comes from the 5 V CMOS I/O with TTL thresholds and the inherent EMI robustness of deterministic CPLD timing, which avoids the spectral spreading seen in microprocessorbased I/O expanders.
Recomendado
Legacy Glue-Logic Replacement
The EPM9560RC240-15N consolidates dozens of 74-series TTL glue-logic chips (decoders, muxes, latches, flip-flops) into a single programmable device, reducing PCB area, power consumption, and BOM cost. With 560 macrocells it can replace up to 100+ discrete TTL packages, while the non-volatile EEPROM configuration preserves pin-locked functionality across design revisions. For legacy systems where the original TTL parts are end-of-life, this consolidation delivers a one-time redesign effort with a permanent roadmap of in-system reprogrammability.
Recomendado
Telecom Backplane Interface Logic
The EPM9560RC240-15N is used in telecom backplanes for low-level line-card interface logic, including clock-distribution gating, frame-sync generation, and alarm-signal aggregation. Its 5 V I/O tolerance interfaces directly with legacy ECL/TTL line-interface units, and the 15 ns tPD provides adequate margin for 50 MHz backplane operation. The JTAG boundary-scan capability is critical for backplane manufacturing tests where bed-of-nails fixtures are impractical, and the deterministic PIA timing prevents the metastability issues common in microprocessorbased backplane controllers.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para EPM9560RC240-15N — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | EPM9560RC240-15 | EPM9560RC240-12 | EPM9560RC240-10N | EPM9560RC240-15C | EPM9560RC240-10 |
|---|---|---|---|---|---|---|
| Brand | Altera (Intel) | Altera (Intel) | Altera (Intel) | Altera (Intel) | Altera (Intel) | Altera (Intel) |
| Package | RQFP-240 | RQFP-240 - same | RQFP-240 - same | RQFP-240 - same | RQFP-240 - same | RQFP-240 - same |
| Macrocells | 560 | 560 | 560 | 560 | 560 | 560 |
| tPD (Pin-to-Pin Delay) | 15 ns | 15 ns | 12 ns (-20%) | 10 ns (-33%) | 15 ns | 10 ns (-33%) |
| Maximum User I/O | 216 | 216 | 216 | 216 | 216 | 216 |
| Operating Temperature | 0C to +70C (Commercial) | 0C to +70C (Commercial) | 0C to +70C (Commercial) | 0C to +70C (Commercial) | 0C to +70C (Commercial) | 0C to +70C (Commercial) |
Principais diferenciais
- Lead-free terminal finish (Pb-free 'N' suffix) (vs EPM9560RC240-15)
- Faster speed grade available within same footprint (vs EPM9560RC240-10N)
- Pin-locked design preservation across speed grades (vs EPM9560ARC240-10)
Notas de projeto
Estimated: The EPM9560RC240-15N draws approximately 200-400 mA from a 5.0 V supply in typical operation depending on switching activity and output loading; peak I/O current can rise to 1 A during simultaneous switching of all 216 outputs. Designers should provide a minimum of four 0.1 uF decoupling capacitors placed within 5 mm of each VCC pin group, plus a single 47 uF bulk tantalum capacitor at the board's CPLD power-entry point. The 5.0 V rail must be regulated to within +/-5%; a ferrite bead in series with the analog VCC is recommended for designs with sensitive analog circuitry sharing the same supply.
The RQFP-240 package uses gull-wing leads on a 0.5 mm pitch, which requires careful PCB land-pattern design and a reflow-profile compatible with the package's thermal mass. Estimated: keep all signal traces on inner layers to free the top/bottom layers for power planes and decoupling; route JTAG signals (TDI, TDO, TMS, TCK) together with a 10 kohm pull-up on TCK to prevent spurious configuration during power-up. A 4-layer PCB stackup with dedicated ground and power planes is strongly recommended to control impedance for the 35 LAB outputs switching simultaneously.
Critical pitfalls when designing with the EPM9560RC240-15N: (1) never apply 3.3 V signals directly to 5 V I/O pins without level translation; (2) configure unused I/O pins as outputs driving ground or as inputs with internal pull-ups enabled to minimize power and noise; (3) always assert the JTAG TRST pin at power-up to reset the TAP controller, otherwise the part may enter an indeterminate state during boundary-scan testing; (4) observe the VCC rise-time specification (typically <100 ms) to avoid partial programming of the EEPROM array; (5) check that the Quartus MAX+PLUS II toolchain supports your design before committing, since modern Quartus Prime has dropped MAX 9000 support.
Informações de conformidade
The 'N' suffix in EPM9560RC240-15N denotes lead-free terminal finish per Altera ordering nomenclature, indicating Pb-free assembly compliant with RoHS Directive 2002/95/EC. Original Altera/Intel material-declaration documentation applies; specific REACH SVHC and halogen-free status should be confirmed with the manufacturer for the latest shipment date.
