EPM9560RI210-15 - MAX 9000 CPLD 560 Macrocell | Altera
N.º da peça: EPM9560RI210-15 ✗ Fim de vida| Qtd. | Preço unitário | Total |
|---|---|---|
| 1 | $0 | $0,00 |
| 10 | $0 | $0,00 |
| 100 | $0 | $0,00 |
| 500 | $0 | $0,00 |
| 1.000 | $0 | $0,00 |
EPM9560RI210-15 Visão geral
A CPLD (Complex Programmable Logic Device) is a programmable logic IC built from an array of macrocells connected by a programmable interconnect matrix. Unlike an FPGA, a CPLD stores its configuration in non-volatile EEPROM/flash, is instantly active at power-up, and offers deterministic, fixed timing. In the logic hierarchy, a CPLD sits between simple PLDs (PAL/GAL) and FPGAs, and belongs to the broader programmable logic device (PLD) and semiconductor IC categories. The MAX 9000 family uses Altera's FastTrack Interconnect and MultiVolt I/O, allowing 5.0 V core operation with 3.3 V-compatible I/O.
Key features of the EPM9560RI210-15 include 560 macrocells organized into 20 logic array blocks (LABs), 12,000 usable gates, 164 user I/O pins, and a 15 ns pin-to-pin delay (the -15 speed grade). The device supports in-system programmability (ISP) via the JTAG boundary-scan interface, enabling field upgrades without removing the part from the board. Its 210-pin RQFP package provides a high I/O-to-package ratio for dense backplane and bus-interface designs.
The MAX 9000 architecture routes signals through a continuous FastTrack Interconnect, giving predictable, skew-controlled timing that simplifies static timing analysis. Each macrocell contains a programmable flip-flop with individual clock, clear, and preset control, supporting both registered and combinatorial logic. The EEPROM configuration retains its programmed state for over 20 years and is immune to single-event upsets, making the device suitable for industrial control and instrumentation.
Typical applications include PCI and VME bus bridging, industrial automation controllers, telecommunications line-card glue logic, test-and-measurement instrumentation, and legacy system replacement where instant-on operation and deterministic timing are required. The 5.0 V core and MultiVolt I/O simplify interfacing to both 5 V and 3.3 V peripherals.
When designing with the EPM9560RI210-15, note that the device is a mature, legacy MAX 9000 part; verify availability and consider pin-compatible MAX 9000 variants in the same 210-pin RQFP footprint for supply continuity. Provide adequate decoupling and follow Altera's recommended power-up sequencing for reliable ISP operation.
This page synthesizes distributor availability, drop-in MAX 9000 alternatives, and practical design notes not found in the manufacturer datasheet, giving engineers a single reference for replacement and lifecycle decisions.
Alternativas drop-in para EPM9560RI210-15 — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Variantes desta série
Modelos da mesma série compatíveis como drop-in com EPM9560RI210-15 (mesmo formato e footprint) — diferindo em Package, In-System Programmability, User I/O Pins, Usable Gates, Family.
Ferramenta de comparação rápida — selecione peças alternativas para comparação lado a lado:
EPM9560RC210-15
✅ Drop-In ⚠️ Especificações não verificadas📋 Alternativa de referência (fora do catálogo)
EPM9560RC210-20
✅ Drop-In ⚠️ Especificações não verificadas✓ Em estoque
$60 / unidade
Ver ficha técnica →EPM9560RC240-15
✅ Drop-In ⚠️ Especificações não verificadas✓ Em estoque
$174.72 / unidade
Ver ficha técnica →EPM9560RC208-15
✅ Drop-In ⚠️ Especificações não verificadas✓ Em estoque
Consulte o preço
Ver ficha técnica →EPM9560RC304-15
✅ Drop-In ⚠️ Especificações não verificadas✓ Em estoque
$9.4 / unidade
Ver ficha técnica →EPM9560RI210-15 Classificações máximas e características elétricas
| Family | MAX 9000 (EPM9560) |
| Device Type | Complex Programmable Logic Device (CPLD) |
| Macrocells | 560 |
| Usable Gates | 12,000 |
| Logic Array Blocks (LABs) | 20 |
| User I/O Pins | 164 |
| Pin-to-Pin Delay (tPD) | 15 ns (-15 speed grade) |
| Supply Voltage (VCCINT) | 5.0 V |
| I/O Voltage (MultiVolt) | 3.3 V / 5.0 V compatible |
| Configuration Memory | EEPROM (non-volatile) |
| In-System Programmability | Yes (JTAG ISP) |
| JTAG Boundary Scan | IEEE 1149.1 compliant |
| Encapsulamento | 210-pin RQFP (PowerQuad) |
| Temperatura de operação | Industrial (-40C to +85C) |
| Tipo de montagem | Surface Mount |
| Status RoHS | ROHS3 Compliant |
| Nível de sensibilidade à umidade (MSL) | 3 (168 Hours) |
| Manufacturer Standard Lead Time | 1-7 Days (distributor stock) |
Guia de Configuração de Pinos do EPM9560RI210-15 210-pin rqfp (powerquad)
Configuração de pinos para EPM9560RI210-15 (pacote 210-pin rqfp (powerquad)). Este CI digital inclui GPIO, interfaces de comunicação (UART, SPI, I2C) e pinos de alimentação. Consulte o datasheet do fabricante para funções alternativas dos pinos e opções de configuração. Essencial para projeto de sistemas embarcados e layout de PCB.
Nenhum dado detalhado de pinagem disponível para EPM9560RI210-15.
Consulte a ficha técnica para a configuração completa dos pinos.
Aplicações típicas
EPM9560RI210-15 é adequado para 6 aplicaçãos: PCI Bus Bridging, Industrial Automation Controller, Telecommunications Line Card Glue Logic, Test and Measurement Instrumentation, Legacy System Replacement, Backplane Interface Logic.
PCI Bus Bridging
The EPM9560RI210-15 fits PCI bus-bridging designs because its 164 user I/O pins and 560 macrocells provide sufficient logic and I/O to implement bus-interface glue, address decoding, and handshake state machines. Its 15 ns pin-to-pin delay and deterministic FastTrack Interconnect timing meet the fixed-latency requirements of PCI transactions, while the 5.0 V core with MultiVolt 3.3 V I/O simplifies interfacing to both legacy 5 V and modern 3.3 V peripherals. Placed between the host bridge and peripheral slots, the CPLD handles protocol translation and wait-state generation. Unlike an FPGA, it is instantly active at power-up from EEPROM, avoiding configuration latency during bus enumeration.
Recomendado
Industrial Automation Controller
The EPM9560RI210-15 suits industrial automation controllers because its industrial -40C to +85C temperature rating and non-volatile EEPROM configuration ensure reliable operation in factory environments without a configuration PROM. The 560 macrocells implement PLC-style state machines, encoder interfaces, and safety interlocks, while the 164 I/O pins connect directly to sensors, relays, and motor-driver logic. Its 15 ns pin-to-pin delay provides deterministic response for time-critical control loops. Because the configuration is retained for over 20 years and is immune to single-event upsets, the device recovers instantly from power interruptions. Designers typically pair it with opto-isolated inputs and relay drivers on the field side.
Recomendado
Telecommunications Line Card Glue Logic
The EPM9560RI210-15 is used in telecommunications line cards for glue logic because its 560 macrocells and 164 I/O pins consolidate multiple discrete logic functions into one device, reducing board area and component count. It implements clock-domain handshakes, FIFO control, and backplane interface logic with the deterministic 15 ns timing required for TDM and SONET line-card designs. The 5.0 V core with MultiVolt I/O allows direct connection to both 5 V and 3.3 V line-card components. Instant-on EEPROM configuration eliminates the boot delay of SRAM-based FPGAs, which is critical for line cards that must be operational immediately after power restoration.
Recomendado
Test and Measurement Instrumentation
The EPM9560RI210-15 fits test-and-measurement instrumentation because its deterministic 15 ns pin-to-pin delay and fixed FastTrack Interconnect timing allow precise, repeatable signal generation and capture. The 560 macrocells implement trigger logic, pattern generators, and counter/timer functions, while the 164 I/O pins interface to ADCs, DACs, and front-panel controls. Non-volatile EEPROM configuration means the instrument is ready immediately at power-up, with no FPGA configuration sequence. The industrial temperature range supports benchtop and rack-mount instruments operating in varied environments. Designers often use the JTAG ISP interface to update measurement algorithms in the field without removing the device.
Recomendado
Legacy System Replacement
The EPM9560RI210-15 is frequently selected for legacy system replacement because it preserves the original MAX 9000 architecture, pinout, and 5.0 V logic levels, allowing drop-in replacement of obsolete EPM9560 devices without PCB redesign. Its 560 macrocells and 164 I/O pins match the original logic capacity, and the 15 ns speed grade maintains existing timing margins. Because the configuration is stored in EEPROM, the replacement device can be programmed with the original JEDEC file using the same JTAG interface. This minimizes requalification effort for long-lifecycle industrial, medical, and aerospace systems where redesign is prohibitively expensive.
Recomendado
Backplane Interface Logic
The EPM9560RI210-15 suits backplane interface logic because its 164 user I/O pins can drive and receive the wide parallel buses typical of VME, CompactPCI, and proprietary backplanes. The 560 macrocells implement address decoding, arbitration, and bus-transceiver control, while the 15 ns pin-to-pin delay supports the tight setup and hold windows of high-speed backplane protocols. The 5.0 V core provides robust noise margins on long backplane traces, and MultiVolt I/O allows mixed 5 V/3.3 V card populations. Instant-on EEPROM configuration ensures the interface is active before the system controller begins bus enumeration, avoiding arbitration deadlock.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para EPM9560RI210-15 — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | EPM9560RC210-15 | EPM9560RC210-20 | EPM9560RC240-15 | EPM9560RC208-15 |
|---|---|---|---|---|---|
| Package | 210-pin RQFP | 210-pin RQFP - same | 210-pin RQFP - same | 240-pin RQFP - different | 208-pin RQFP - different |
| Brand | Altera | Altera | Altera | Altera | Altera |
| Macrocells | 560 | 560 | 560 | 560 | 560 |
| Usable Gates | 12,000 | 12,000 | 12,000 | 12,000 | 12,000 |
| Pin-to-Pin Delay (tPD) | 15 ns | 15 ns | 20 ns | 15 ns | 15 ns |
| Temperature Grade | Industrial (-40C to +85C) | Commercial (0C to +70C) | Commercial (0C to +70C) | Commercial (0C to +70C) | Commercial (0C to +70C) |
| Supply Voltage | 5.0 V | 5.0 V | 5.0 V | 5.0 V | 5.0 V |
| Configuration Memory | EEPROM (non-volatile) | EEPROM (non-volatile) | EEPROM (non-volatile) | EEPROM (non-volatile) | EEPROM (non-volatile) |
Principais diferenciais
- Industrial temperature grade in the 210-pin RQFP footprint (vs EPM9560RC210-15)
- Faster -15 speed grade (vs EPM9560RC210-20)
- Higher I/O density than smaller RQFP variants (vs EPM9560RC208-15)
Notas de projeto
Decouple every VCCINT and VCCIO pin with a 0.1 uF ceramic capacitor placed as close to the pin as possible, plus at least one 10 uF bulk capacitor per power rail. The MAX 9000 EPM9560 draws transient current during macrocell switching; inadequate decoupling causes ground bounce and unreliable EEPROM configuration. Follow Altera's recommended power-up ramp and keep VCCINT within the 5.0 V +/- 5% tolerance specified in the MAX 9000 datasheet.
Route the JTAG signals (TCK, TMS, TDI, TDO) as short, matched traces with a solid ground return, and keep TCK away from high-speed I/O to avoid clocking spurious states during in-system programming. Place the JTAG header close to the device and add a pull-up on TMS and a pull-down on TCK per Altera ISP guidelines. The 210-pin RQFP requires a thermal land pattern; follow the package drawing in the MAX 9000 datasheet for the exposed pad and solder-mask dimensions.
Do not assume the EPM9560RI210-15 is pin-compatible with other EPM9560 package variants: the 208-pin, 240-pin, and 304-pin RQFP options have different land patterns and I/O counts despite identical 560-macrocell logic. Confirm the exact package suffix (I210) before substituting. Also verify the speed grade, since a -20 part has a 20 ns pin-to-pin delay versus 15 ns for the -15 grade, which can violate timing in existing designs.
Informações de conformidade
Distributor fpgalink lists the EPM9560RI210-15 as ROHS3 Compliant with MSL 3 (168 hours). REACH, halogen-free, and conflict-minerals status were not stated in the verified web data and are marked unknown.
