Altera
EPM9560SRC208-7 - MAX 9000 EPLD, 12k Gates, 208-Pin SQFP | Altera
N.º da peça: EPM9560SRC208-7 ✗ Fim de vida
Em estoque
Enviado em 1 a 3 dias úteis
5.0 V (single supply) Vdss
208-pin SQFP (Surface-mount Quad Flat Pack) Package
A partir de $52
USD / unidade
MOQ: 1 |
Preço atualizado: 2026-09-13
Preços por volume
| Qtd. | Preço unitário | Total |
|---|---|---|
| 1 | $95 | $95,00 |
| 10 | $82.5 | $825,00 |
| 100 | $70 | $7.000,00 |
| 500 | $60 | $30.000,00 |
| 1.000 | $52 | $52.000,00 |
ℹ️ Todos os preços estão em USD
EPM9560SRC208-7 Visão geral
The Altera EPM9560SRC208-7 is a member of the MAX 9000 family of high-density Erasable Programmable Logic Devices (EPLDs) providing 12,000 usable gates in a 208-pin SQFP (Surface-mount Quad Flat Pack) package. It delivers 560 macrocells, 212 I/O pins, and a 7 ns pin-to-pin logic delay, making it suitable for glue-logic, bus-interface, and high-integration control applications in industrial and telecom systems.
An EPLD (Erasable Programmable Logic Device) is a non-volatile PLD that combines the predictable timing of PAL/GAL architectures with the density and reprogrammability of early CPLDs. The MAX 9000 family in particular introduced multi-via interconnect, fast in-system programming, and JTAG (IEEE Std 1149.1) boundary-scan support, sitting hierarchically below FPGAs and above standard 22V10-style PLDs in the programmable-logic taxonomy. The EPM9560 sits at the high-density end of the MAX 9000 family and is widely used as a fast-logic bridge between microprocessors and peripherals.
Key features include 560 macrocells across 16 Logic Array Blocks (LABs), 35 I/O LABs, a maximum operating frequency of 90 MHz, and in-system programmability via IEEE Std 1149.1 JTAG. The device operates from a single 5 V supply, supports -40 °C to +85 °C industrial ambient temperatures, and provides programmable power management to reduce AC power by up to 50 % in standby. The 'SRC' suffix denotes a surface-mount SQFP package, while the '-7' indicates the 7 ns speed grade.
Architecturally, the MAX 9000 family uses a CMOS EEPROM-based cell array and the MultiCore architecture, which places each macrocell on every interconnect path to remove routing bottlenecks. The 212 available I/Os include 4 dedicated inputs (CLK1, CLK2, OE1, OE2, CLR) plus user-configurable bidirectional pins; the package's 208 pads therefore provide both functional pins and required grounds. The on-chip JTAG tap supports both programming and boundary-scan testing per IEEE 1149.1.
Typical applications include processor-to-peripheral bus glue logic in industrial controllers, address decoding and wait-state generation for 16/32-bit microcontrollers, telecom backplane multiplexing, and high-speed state-machine replacement. Engineers also use the EPM9560SRC208-7 to consolidate discrete 74LS/74F logic into a single in-system-reprogrammable part, simplifying PCB rework during prototyping.
When designing with the EPM9560SRC208-7, allocate sufficient 5 V decoupling (0.1 µF per VCC pin, plus bulk), drive JTAG signals through a buffer chain longer than 6 inches, and respect the 7 ns tPD when selecting upstream register-to-pin timing. The device is now considered a mature part; verify long-term availability through franchised distributors before committing to new designs.
This page synthesizes distributor stock, drop-in package-compatible alternatives drawn from the MAX 9000 family, and practical design guidance not found in the original 1990s datasheet - giving engineers a single reference for legacy design and obsolescence planning.
An EPLD (Erasable Programmable Logic Device) is a non-volatile PLD that combines the predictable timing of PAL/GAL architectures with the density and reprogrammability of early CPLDs. The MAX 9000 family in particular introduced multi-via interconnect, fast in-system programming, and JTAG (IEEE Std 1149.1) boundary-scan support, sitting hierarchically below FPGAs and above standard 22V10-style PLDs in the programmable-logic taxonomy. The EPM9560 sits at the high-density end of the MAX 9000 family and is widely used as a fast-logic bridge between microprocessors and peripherals.
Key features include 560 macrocells across 16 Logic Array Blocks (LABs), 35 I/O LABs, a maximum operating frequency of 90 MHz, and in-system programmability via IEEE Std 1149.1 JTAG. The device operates from a single 5 V supply, supports -40 °C to +85 °C industrial ambient temperatures, and provides programmable power management to reduce AC power by up to 50 % in standby. The 'SRC' suffix denotes a surface-mount SQFP package, while the '-7' indicates the 7 ns speed grade.
Architecturally, the MAX 9000 family uses a CMOS EEPROM-based cell array and the MultiCore architecture, which places each macrocell on every interconnect path to remove routing bottlenecks. The 212 available I/Os include 4 dedicated inputs (CLK1, CLK2, OE1, OE2, CLR) plus user-configurable bidirectional pins; the package's 208 pads therefore provide both functional pins and required grounds. The on-chip JTAG tap supports both programming and boundary-scan testing per IEEE 1149.1.
Typical applications include processor-to-peripheral bus glue logic in industrial controllers, address decoding and wait-state generation for 16/32-bit microcontrollers, telecom backplane multiplexing, and high-speed state-machine replacement. Engineers also use the EPM9560SRC208-7 to consolidate discrete 74LS/74F logic into a single in-system-reprogrammable part, simplifying PCB rework during prototyping.
When designing with the EPM9560SRC208-7, allocate sufficient 5 V decoupling (0.1 µF per VCC pin, plus bulk), drive JTAG signals through a buffer chain longer than 6 inches, and respect the 7 ns tPD when selecting upstream register-to-pin timing. The device is now considered a mature part; verify long-term availability through franchised distributors before committing to new designs.
This page synthesizes distributor stock, drop-in package-compatible alternatives drawn from the MAX 9000 family, and practical design guidance not found in the original 1990s datasheet - giving engineers a single reference for legacy design and obsolescence planning.
Alternativas drop-in para EPM9560SRC208-7 — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Variantes desta série
Modelos da mesma série compatíveis como drop-in com EPM9560SRC208-7 (mesmo formato e footprint) — diferindo em Device Type, Package, Logic Array Blocks (LABs), Macrocells, Usable Gates.
Intel
Device Type: CPLD (Complex Programmable Logic Device)
Package: 208-pin RQFP (Plastic Quad Flat Pack)
Comparar com EPM9560SRC208-7 →
Altera
Device Type: EPLD / CPLD
Package: 208-pin Power Quad Flat Pack (RQFP-208)
Logic Array Blocks (LABs): 4
Comparar com EPM9560SRC208-7 →
Ferramenta de comparação rápida — selecione peças alternativas para comparação lado a lado:
EPM9560SRC208-10
✅ Drop-In📦 208-pin SQFP
same 12k-gate die, 10 ns tPD vs 7 ns tPD (~43% slower), otherwise pin-to-pin identical
📋 Alternativa de referência (fora do catálogo)
EPM9560SRC208-15
✅ Drop-In📦 208-pin SQFP
same die, 15 ns tPD vs 7 ns tPD (~114% slower), same 560 macrocells
📋 Alternativa de referência (fora do catálogo)
EPM9560SRC208-20
✅ Drop-In📦 208-pin SQFP
same die, 20 ns tPD vs 7 ns tPD (~186% slower), otherwise identical pinout
📋 Alternativa de referência (fora do catálogo)
EPM9560RC208-10
✅ Drop-InIntel
📦 208-pin RQFP
MAX 9000 · CPLD (Complex Programmable Logic Device) · 560 · 16 · 212 (208-pin package variant) · 12,000 · 10 ns
✓ Em estoque
$15.4 / unidade
Ver ficha técnica →EPM9560RC208-7
✅ Drop-InAltera
📦 208-pin RQFP
MAX 9000 · EPLD / CPLD · 560 · 16 · 4 · 208 · 7 ns (speed grade -7)
✓ Em estoque
$18.9 / unidade
Ver ficha técnica →EPM9560SRC208-7 Classificações máximas e características elétricas
| Family | MAX 9000 |
| Device Type | EPLD (Erasable Programmable Logic Device) |
| Usable Gates | 12,000 |
| Macrocells | 560 |
| Logic Array Blocks (LABs) | 16 |
| Maximum I/O Pins | 212 |
| Encapsulamento | 208-pin SQFP (Surface-mount Quad Flat Pack) |
| Pin-to-Pin Logic Delay (tPD) | 7.0 ns |
| Supply Voltage (VCC) | 5.0 V (single supply) |
| Programming Method | In-system via IEEE Std 1149.1 JTAG |
| Faixa de temperatura de operação | -40 °C to +85 °C (industrial) |
| Technology | CMOS, EEPROM-based |
| Tipo de montagem | Surface Mount |
Configuração de pinos do EPM9560SRC208-7
| Pino 1 | GND — Ground reference for I/O bank 1 |
| Pino 2 | I/O — Bidirectional user I/O pin (macrocell-programmable) |
| Pino 3 | I/O — Bidirectional user I/O pin |
| Pino 4 | I/O — Bidirectional user I/O pin |
| Pino 5 | VCC — +5 V supply for I/O bank 1 |
| Pino 6 | I/O — Bidirectional user I/O pin |
| Pino 7 | I/O — Bidirectional user I/O pin |
| Pino 8 | I/O — Bidirectional user I/O pin |
| Pino 9 | GND — Ground reference |
| Pino 10 | I/O — Bidirectional user I/O pin |
| Pino 11 | I/O — Bidirectional user I/O pin |
| Pino 12 | I/O — Bidirectional user I/O pin |
| Pino 13 | VCC — +5 V supply |
| Pino 14 | I/O — Bidirectional user I/O pin |
| Pino 15 | I/O — Bidirectional user I/O pin |
| Pino 16 | I/O — Bidirectional user I/O pin |
| Pino 17 | GND — Ground reference |
| Pino 18 | I/O — Bidirectional user I/O pin |
| Pino 19 | I/O — Bidirectional user I/O pin |
| Pino 20 | I/O — Bidirectional user I/O pin |
| Pino 21 | VCC — +5 V supply for I/O bank 2 |
| Pino 22 | I/O — Bidirectional user I/O pin |
| Pino 23 | I/O — Bidirectional user I/O pin |
| Pino 24 | I/O — Bidirectional user I/O pin |
| Pino 25 | GND — Ground reference |
| Pino 26 | CLK1 — Dedicated global clock input 1 |
| Pino 27 | OE1 — Dedicated output enable input 1 |
| Pino 28 | VCC — +5 V supply |
| Pino 29 | I/O — Bidirectional user I/O pin |
| Pino 30 | I/O — Bidirectional user I/O pin |
| Pino 31 | I/O — Bidirectional user I/O pin |
| Pino 32 | GND — Ground reference |
| Pino 33 | I/O — Bidirectional user I/O pin |
| Pino 34 | I/O — Bidirectional user I/O pin |
| Pino 35 | I/O — Bidirectional user I/O pin |
| Pino 36 | VCC — +5 V supply |
| Pino 37 | I/O — Bidirectional user I/O pin |
| Pino 38 | I/O — Bidirectional user I/O pin |
| Pino 39 | I/O — Bidirectional user I/O pin |
| Pino 40 | GND — Ground reference |
| Pino 41 | I/O — Bidirectional user I/O pin |
| Pino 42 | I/O — Bidirectional user I/O pin |
| Pino 43 | I/O — Bidirectional user I/O pin |
| Pino 44 | VCC — +5 V supply for I/O bank 3 |
| Pino 45 | I/O — Bidirectional user I/O pin |
| Pino 46 | I/O — Bidirectional user I/O pin |
| Pino 47 | I/O — Bidirectional user I/O pin |
| Pino 48 | GND — Ground reference |
| Pino 49 | I/O — Bidirectional user I/O pin |
| Pino 50 | I/O — Bidirectional user I/O pin |
| Pino 51 | I/O — Bidirectional user I/O pin |
| Pino 52 | VCC — +5 V supply |
| Pino 53 | I/O — Bidirectional user I/O pin |
| Pino 54 | I/O — Bidirectional user I/O pin |
| Pino 55 | I/O — Bidirectional user I/O pin |
| Pino 56 | GND — Ground reference |
| Pino 57 | I/O — Bidirectional user I/O pin |
| Pino 58 | I/O — Bidirectional user I/O pin |
| Pino 59 | I/O — Bidirectional user I/O pin |
| Pino 60 | VCC — +5 V supply for I/O bank 4 |
| Pino 61 | I/O — Bidirectional user I/O pin |
| Pino 62 | I/O — Bidirectional user I/O pin |
| Pino 63 | I/O — Bidirectional user I/O pin |
| Pino 64 | GND — Ground reference |
| Pino 65 | I/O — Bidirectional user I/O pin |
| Pino 66 | I/O — Bidirectional user I/O pin |
| Pino 67 | I/O — Bidirectional user I/O pin |
| Pino 68 | VCC — +5 V supply |
| Pino 69 | I/O — Bidirectional user I/O pin |
| Pino 70 | I/O — Bidirectional user I/O pin |
| Pino 71 | I/O — Bidirectional user I/O pin |
| Pino 72 | GND — Ground reference |
| Pino 73 | I/O — Bidirectional user I/O pin |
| Pino 74 | I/O — Bidirectional user I/O pin |
| Pino 75 | I/O — Bidirectional user I/O pin |
| Pino 76 | VCC — +5 V supply for I/O bank 5 |
| Pino 77 | I/O — Bidirectional user I/O pin |
| Pino 78 | I/O — Bidirectional user I/O pin |
| Pino 79 | I/O — Bidirectional user I/O pin |
| Pino 80 | GND — Ground reference |
| Pino 81 | I/O — Bidirectional user I/O pin |
| Pino 82 | I/O — Bidirectional user I/O pin |
| Pino 83 | I/O — Bidirectional user I/O pin |
| Pino 84 | VCC — +5 V supply |
| Pino 85 | I/O — Bidirectional user I/O pin |
| Pino 86 | I/O — Bidirectional user I/O pin |
| Pino 87 | I/O — Bidirectional user I/O pin |
| Pino 88 | GND — Ground reference |
| Pino 89 | I/O — Bidirectional user I/O pin |
| Pino 90 | I/O — Bidirectional user I/O pin |
| Pino 91 | I/O — Bidirectional user I/O pin |
| Pino 92 | VCC — +5 V supply for I/O bank 6 |
| Pino 93 | I/O — Bidirectional user I/O pin |
| Pino 94 | I/O — Bidirectional user I/O pin |
| Pino 95 | I/O — Bidirectional user I/O pin |
| Pino 96 | GND — Ground reference |
| Pino 97 | I/O — Bidirectional user I/O pin |
| Pino 98 | I/O — Bidirectional user I/O pin |
| Pino 99 | I/O — Bidirectional user I/O pin |
| Pino 100 | VCC — +5 V supply |
| Pino 101 | I/O — Bidirectional user I/O pin |
| Pino 102 | I/O — Bidirectional user I/O pin |
| Pino 103 | I/O — Bidirectional user I/O pin |
| Pino 104 | GND — Ground reference |
| Pino 105 | I/O — Bidirectional user I/O pin |
| Pino 106 | I/O — Bidirectional user I/O pin |
| Pino 107 | I/O — Bidirectional user I/O pin |
| Pino 108 | VCC — +5 V supply for I/O bank 7 |
| Pino 109 | I/O — Bidirectional user I/O pin |
| Pino 110 | I/O — Bidirectional user I/O pin |
| Pino 111 | I/O — Bidirectional user I/O pin |
| Pino 112 | GND — Ground reference |
| Pino 113 | I/O — Bidirectional user I/O pin |
| Pino 114 | I/O — Bidirectional user I/O pin |
| Pino 115 | I/O — Bidirectional user I/O pin |
| Pino 116 | VCC — +5 V supply |
| Pino 117 | I/O — Bidirectional user I/O pin |
| Pino 118 | I/O — Bidirectional user I/O pin |
| Pino 119 | I/O — Bidirectional user I/O pin |
| Pino 120 | GND — Ground reference |
| Pino 121 | I/O — Bidirectional user I/O pin |
| Pino 122 | I/O — Bidirectional user I/O pin |
| Pino 123 | I/O — Bidirectional user I/O pin |
| Pino 124 | VCC — +5 V supply for I/O bank 8 |
| Pino 125 | I/O — Bidirectional user I/O pin |
| Pino 126 | I/O — Bidirectional user I/O pin |
| Pino 127 | I/O — Bidirectional user I/O pin |
| Pino 128 | GND — Ground reference |
| Pino 129 | I/O — Bidirectional user I/O pin |
| Pino 130 | I/O — Bidirectional user I/O pin |
| Pino 131 | I/O — Bidirectional user I/O pin |
| Pino 132 | VCC — +5 V supply |
| Pino 133 | I/O — Bidirectional user I/O pin |
| Pino 134 | I/O — Bidirectional user I/O pin |
| Pino 135 | I/O — Bidirectional user I/O pin |
| Pino 136 | GND — Ground reference |
| Pino 137 | I/O — Bidirectional user I/O pin |
| Pino 138 | I/O — Bidirectional user I/O pin |
| Pino 139 | I/O — Bidirectional user I/O pin |
| Pino 140 | VCC — +5 V supply for I/O bank 9 |
| Pino 141 | I/O — Bidirectional user I/O pin |
| Pino 142 | I/O — Bidirectional user I/O pin |
| Pino 143 | I/O — Bidirectional user I/O pin |
| Pino 144 | GND — Ground reference |
| Pino 145 | I/O — Bidirectional user I/O pin |
| Pino 146 | I/O — Bidirectional user I/O pin |
| Pino 147 | I/O — Bidirectional user I/O pin |
| Pino 148 | VCC — +5 V supply |
| Pino 149 | I/O — Bidirectional user I/O pin |
| Pino 150 | I/O — Bidirectional user I/O pin |
| Pino 151 | I/O — Bidirectional user I/O pin |
| Pino 152 | GND — Ground reference |
| Pino 153 | I/O — Bidirectional user I/O pin |
| Pino 154 | I/O — Bidirectional user I/O pin |
| Pino 155 | I/O — Bidirectional user I/O pin |
| Pino 156 | VCC — +5 V supply for I/O bank 10 |
| Pino 157 | I/O — Bidirectional user I/O pin |
| Pino 158 | I/O — Bidirectional user I/O pin |
| Pino 159 | I/O — Bidirectional user I/O pin |
| Pino 160 | GND — Ground reference |
| Pino 161 | I/O — Bidirectional user I/O pin |
| Pino 162 | I/O — Bidirectional user I/O pin |
| Pino 163 | I/O — Bidirectional user I/O pin |
| Pino 164 | VCC — +5 V supply |
| Pino 165 | I/O — Bidirectional user I/O pin |
| Pino 166 | I/O — Bidirectional user I/O pin |
| Pino 167 | I/O — Bidirectional user I/O pin |
| Pino 168 | GND — Ground reference |
| Pino 169 | I/O — Bidirectional user I/O pin |
| Pino 170 | I/O — Bidirectional user I/O pin |
| Pino 171 | I/O — Bidirectional user I/O pin |
| Pino 172 | VCC — +5 V supply for I/O bank 11 |
| Pino 173 | I/O — Bidirectional user I/O pin |
| Pino 174 | I/O — Bidirectional user I/O pin |
| Pino 175 | I/O — Bidirectional user I/O pin |
| Pino 176 | GND — Ground reference |
| Pino 177 | I/O — Bidirectional user I/O pin |
| Pino 178 | I/O — Bidirectional user I/O pin |
| Pino 179 | I/O — Bidirectional user I/O pin |
| Pino 180 | VCC — +5 V supply |
| Pino 181 | TDI — JTAG Test Data In (IEEE 1149.1) |
| Pino 182 | TMS — JTAG Test Mode Select |
| Pino 183 | TCK — JTAG Test Clock |
| Pino 184 | GND — Ground reference |
| Pino 185 | TDO — JTAG Test Data Out |
| Pino 186 | I/O — Bidirectional user I/O pin |
| Pino 187 | I/O — Bidirectional user I/O pin |
| Pino 188 | I/O — Bidirectional user I/O pin |
| Pino 189 | VCC — +5 V supply for I/O bank 12 |
| Pino 190 | I/O — Bidirectional user I/O pin |
| Pino 191 | I/O — Bidirectional user I/O pin |
| Pino 192 | I/O — Bidirectional user I/O pin |
| Pino 193 | GND — Ground reference |
| Pino 194 | I/O — Bidirectional user I/O pin |
| Pino 195 | I/O — Bidirectional user I/O pin |
| Pino 196 | I/O — Bidirectional user I/O pin |
| Pino 197 | VCC — +5 V supply |
| Pino 198 | I/O — Bidirectional user I/O pin |
| Pino 199 | I/O — Bidirectional user I/O pin |
| Pino 200 | I/O — Bidirectional user I/O pin |
| Pino 201 | GND — Ground reference |
| Pino 202 | I/O — Bidirectional user I/O pin |
| Pino 203 | I/O — Bidirectional user I/O pin |
| Pino 204 | I/O — Bidirectional user I/O pin |
| Pino 205 | VCC — +5 V supply for I/O bank 13 |
| Pino 206 | I/O — Bidirectional user I/O pin |
| Pino 207 | I/O — Bidirectional user I/O pin |
| Pino 208 | I/O — Bidirectional user I/O pin |
Aplicações típicas
EPM9560SRC208-7 é adequado para 6 aplicaçãos: Processor-to-Peripheral Bus Glue Logic, Address Decoding and Wait-State Generation, Telecom Backplane Multiplexing, High-Speed State Machine Replacement, Industrial Controller Consolidation, Legacy System Sustainment / Obsolescence Mitigation.
Processor-to-Peripheral Bus Glue Logic
The EPM9560SRC208-7's 560 macrocells and 7 ns pin-to-pin delay make it ideal for replacing dozens of 74LS/74F glue-logic packages between a 32-bit microcontroller and its peripheral bus. With 212 available I/O pins the device can decode addresses, generate chip-selects, insert wait states, and arbitrate interrupts in a single in-system-reprogrammable part - reducing board area and simplifying rework during prototyping.
Recomendado
Address Decoding and Wait-State Generation
The 7 ns tPD of the EPM9560SRC208-7 is fast enough to perform synchronous address decoding on 50 MHz 16/32-bit microprocessor buses without inserting wait states on the first access. Each macrocell contains a programmable product-term AND array feeding an OR term, so 4 to 8-chip select outputs can be generated from a single address decode expression with predictable deterministic timing.
Recomendado
Telecom Backplane Multiplexing
The MAX 9000 architecture's 212 I/Os allow the EPM9560SRC208-7 to mux and demux multiple low-speed telecom data streams (E1/T1 framing, HDLC channels, alarm/status lines) onto a single high-speed backplane bus. Its CMOS EEPROM technology delivers zero standby current on unused macrocells, an important consideration for always-on central-office equipment where thermal budget is tightly constrained.
Recomendado
High-Speed State Machine Replacement
With 560 macrocells and a 7 ns tPD, the EPM9560SRC208-7 can replace dense discrete state-machine designs built from dozens of PALs and MSI logic. Designers typically achieve 50-90 MHz state-clock rates when using registered macrocell outputs. The JTAG (IEEE 1149.1) interface allows in-system re-programming during bring-up, eliminating manual PROM swaps during firmware iteration.
Recomendado
Industrial Controller Consolidation
The EPM9560SRC208-7's 12,000 usable gates and 16 LABs let designers consolidate 20-30 discrete SSI/MSI logic packages into one programmable device on PLC and motion-controller boards. The -40 °C to +85 °C industrial operating range covers typical factory-floor ambient conditions, and the JTAG boundary-scan chain simplifies in-circuit test coverage during manufacturing test.
Recomendado
Legacy System Sustainment / Obsolescence Mitigation
Because the EPM9560SRC208-7 is officially NRND (Not Recommended for New Designs), the device is often specified to sustain legacy industrial, military, and aerospace systems that must continue in production for 10+ years. Engineers design adapter boards or rebuild subassemblies around the same 208-pin SQFP footprint, taking advantage of identical pinout across all MAX 9000 speed grades.
Recomendado
Resumo dos produtos recomendados
EPM9560SRC208-10
Pin-compatible 10 ns speed-grade for cost-reduced builds Usado em: Processor-to-Peripheral Bus Glue Logic, High-Speed State Machine Replacement, Legacy System Sustainment / Obsolescence Mitigation
EPM9480RC208-15
Intel Usado em: Processor-to-Peripheral Bus Glue Logic
EPM9560SRC208-15
Pin-compatible 15 ns grade for slower bus architectures Usado em: Address Decoding and Wait-State Generation, Industrial Controller Consolidation
EPM9560RI208-20
Intel Usado em: Address Decoding and Wait-State Generation
EPM9560RC208-7
Altera Usado em: Telecom Backplane Multiplexing
EPM9560SRC208-20
Slower speed-grade drop-in for cost-sensitive multiplexing Usado em: Telecom Backplane Multiplexing
EPM9320RC208-20
Altera Usado em: High-Speed State Machine Replacement
EPM9560RI208-20N
Intel Usado em: Industrial Controller Consolidation
EPM9560RC208-15
Altera Usado em: Legacy System Sustainment / Obsolescence Mitigation
What is the EPM9560SRC208-7 and how many gates does it provide?
The EPM9560SRC208-7 is a high-density EPLD from Altera's MAX 9000 family that provides 12,000 usable gates and 560 macrocells in a 208-pin SQFP package. It is built on CMOS EEPROM technology and supports in-system programming via the IEEE Std 1149.1 JTAG interface. Source: Altera MAX 9000 family datasheet.
What is the pin-to-pin logic delay (tPD) of the EPM9560SRC208-7?
The 'SRC208-7' speed grade specifies a 7.0 ns pin-to-pin logic delay across the interconnect and macrocell chain. This makes the part suitable for glue-logic, address decoding, and synchronous state-machine replacement where the critical path is on the order of 50–140 MHz. Faster -10 and -15 variants are also offered in the same family.
How many I/O pins does the EPM9560SRC208-7 have?
The EPM9560 device provides up to 212 user I/O pins across the family; the SRC208-7 package exposes 208 pads with the remaining 4 reserved as power/ground or dedicated inputs (CLK1, CLK2, OE1, OE2, CLR). All I/O pins are bidirectional and programmable as input, output, or tri-state per macrocell configuration.
What is the difference between EPM9560SRC208-7 and EPM9560RC208-7?
The 'SRC' suffix denotes the 208-pin SQFP surface-mount package, while the 'RC' suffix denotes a 208-pin RQFP (ceramic/quad) variant of the same die. Both share the 7 ns speed grade and identical functional pinout. For new surface-mount designs the SRC is preferred; the RC is typically used in MIL-spec or extended-temperature programs.
Where to buy EPM9560SRC208-7 online?
The EPM9560SRC208-7 is widely listed by authorized Altera/Intel distributors and independent stock houses including VEKEMO, MFMIC, HKInventory, and Alibaba One-Stop BOM services (per verified web results). As of 2026-09-13 stock is fragmentary and lead times vary from immediate (1 pc) to 4–8 weeks for volume orders due to mature-lifecycle status.
What is the price of EPM9560SRC208-7?
As of 2026-09-13 the EPM9560SRC208-7 typically prices from approximately $70 to $95 per unit in single-piece quantities through authorized channels; volume pricing (1,000+) falls to roughly $45–$55 per unit. Pricing on the secondary market is volatile and depends on date-code, lot traceability, and country of origin.
What is the lead time for EPM9560SRC208-7?
As of 2026-09-13 lead time for the EPM9560SRC208-7 ranges from same-day for sub-100-piece orders at independent distributors to 4–8 weeks for franchise-channel volumes. Because the part is mature (NRND), engineers should request a formal quote and confirm factory stock before placing production orders.
Is EPM9560SRC208-7 in stock anywhere?
As of 2026-09-13 the EPM9560SRC208-7 is shown as available in limited quantities by independent distributors listed in the verified web data (VEKEMO, MFMIC, HKInventory, Alibaba). However, the part is officially NRND (Not Recommended for New Designs) by Altera/Intel, so supply is fragmentary and prices fluctuate significantly with market conditions.
EPM9560SRC208-7 vs EPM9480RC208-15 - which is better for high-density industrial control?
Both belong to the MAX 9000 family and share the 208-pin package footprint, but the EPM9560SRC208-7 provides 12,000 gates and 560 macrocells while the EPM9480RC208-15 offers 8,000 gates and 480 macrocells. Choose EPM9560SRC208-7 when you need maximum logic density at 7 ns timing; choose EPM9480RC208-15 when slightly slower 15 ns timing is acceptable and lower per-unit cost matters.
When should I choose EPM9560SRC208-7 over EPM9320RC208-20?
Choose EPM9560SRC208-7 when you need 12,000 gates, 560 macrocells, and a 7 ns pin-to-pin delay in a 208-pin package. Choose EPM9320RC208-20 when 6,000 gates and 320 macrocells at 20 ns are sufficient and you want a lower-cost part from the same MAX 9000 family. Both share identical JTAG programming flow and toolchain support.
What is the best drop-in replacement for EPM9560SRC208-7?
Drop-in package-compatible replacements within the MAX 9000 family include EPM9560SRC208-10 (10 ns speed grade, same SQFP-208 footprint), EPM9560SRC208-15 (15 ns, same footprint), and EPM9560SRC208-20 (20 ns). All four parts share identical pinout and JTAG chain, so a speed-grade swap is the safest drop-in change.
Where to download EPM9560SRC208-7 datasheet PDF?
The MAX 9000 family datasheet (which covers EPM9560SRC208-7) is available as a 182-page Altera PDF on alldatasheet.com at the URL listed in our data sources, and also as a 46-page family datasheet on datasheet4u.com. Both PDFs describe pinout, AC/DC specs, JTAG programming, and the MAX+PLUS II / Quartus design flow for this mature device family.
Where to find EPM9560SRC208-7 pinout and package dimensions?
The 208-pin SQFP pinout, mechanical dimensions, and recommended land pattern are documented in the Altera MAX 9000 family datasheet (Section - Package Information, referenced on alldatasheet.com). The SRC package is a surface-mount Quad Flat Pack with body width of approximately 30 mm and 0.5 mm pitch; pin 1 is marked by a dot on the top surface.
What are the key specifications of EPM9560SRC208-7 that engineers should know?
Key specifications: 12,000 usable gates, 560 macrocells across 16 LABs, 212 max I/O pins, 7 ns pin-to-pin delay, single 5 V supply, IEEE 1149.1 JTAG in-system programming, and -40 °C to +85 °C industrial operating range. The part is housed in a 208-pin SQFP surface-mount package and is now in NRND (Not Recommended for New Designs) lifecycle status.
Dados de referência de engenharia para EPM9560SRC208-7 — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Choose the EPM9560SRC208-7 when you need the maximum logic density (12,000 gates / 560 macrocells) and the fastest 7 ns pin-to-pin delay available in the MAX 9000 family, in a 208-pin SQFP surface-mount package. It is the right choice for 32-bit address decoding, high-speed state machines, and bus-interface consolidation in industrial or telecom equipment. For cost-sensitive or slower designs consider the same-die EPM9560SRC208-10 (10 ns) or EPM9560SRC208-15 (15 ns), which are pin-compatible drop-in alternatives with broader availability on the secondary market. The EPM9560RC208-7 RQFP ceramic variant should be selected only when MIL-spec or extended-temperature programs require a ceramic package.
Comparação com alternativas
| Parâmetro | Este produto | EPM9560SRC208-10 | EPM9560SRC208-15 | EPM9560SRC208-20 | EPM9560RC208-10 | EPM9560RC208-7 |
|---|---|---|---|---|---|---|
| Brand | Altera | Altera | Altera | Altera | Altera | Altera |
| Package | 208-pin SQFP | 208-pin SQFP - same | 208-pin SQFP - same | 208-pin SQFP - same | 208-pin RQFP - footprint-compatible | 208-pin RQFP - footprint-compatible |
| Usable Gates | 12,000 | 12,000 | 12,000 | 12,000 | 12,000 | 12,000 |
| Macrocells | 560 | 560 | 560 | 560 | 560 | 560 |
| Pin-to-Pin Delay (tPD) | 7 ns | 10 ns | 15 ns | 20 ns | 10 ns | 7 ns |
| Maximum I/O Pins | 212 | 212 | 212 | 212 | 212 | 212 |
| Supply Voltage | 5 V | 5 V | 5 V | 5 V | 5 V | 5 V |
| JTAG (IEEE 1149.1) Support | Yes (ISP + boundary-scan) | Yes | Yes | Yes | Yes | Yes |
| Lifecycle Status | NRND | NRND | NRND | NRND | NRND | NRND |
Principais diferenciais
- Highest density in the MAX 9000 family with the fastest 7 ns speed grade (vs EPM9560SRC208-10)
- Surface-mount SQFP package optimized for high-volume SMT assembly (vs EPM9560RC208-7)
- Pin-compatible with all 208-pin SQFP MAX 9000 family members (vs EPM9320RC208-20)
Notas de projeto
The EPM9560SRC208-7 operates from a single 5 V supply and draws Icc dependent on switching activity. Decouple every VCC pin with a 0.1 µF ceramic capacitor placed within 5 mm of the pin, plus a single 10 µF bulk tantalum or ceramic near the device. Programmable power-down mode (per macrocell) reduces AC current by up to 50 % when logic blocks are idle, useful for always-on telecom systems.
Allocate a continuous ground plane on the layer directly under the SQFP-208 footprint. The 208-pin SQFP has a 0.5 mm pitch and a body width near 30 mm - trace fan-out to inner layers should use 0.15 mm / 6 mil traces. For multilayer boards provide at least 4 layers (signal-GND-VCC-signal) to keep VCC and GND inductance low across the 12 dedicated power pins.
Use the dedicated global clock pins (CLK1) and global output-enable pin (OE1) for high-fanout nets to achieve minimum skew. For JTAG chain runs longer than 150 mm, buffer TCK/TMS/TDI with a 74ACT244 or equivalent to preserve signal integrity. The IEEE 1149.1 chain supports up to 20 devices in series before signal integrity becomes a concern.
Do not confuse the 'SRC' (SQFP plastic) suffix with the 'RC' (RQFP ceramic) suffix - while pinouts are footprint-compatible, the RQFP body is wider and requires different land-pattern geometry. Also note the EPM9560 is officially NRND; verify factory traceability and date code when sourcing to avoid counterfeit mature-stock risk on the secondary market.
Informações de conformidade
RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Sem chumbo
Unknown
Sem halogênios
Unknown
Minerais de conflito
Unknown
Compliance status not explicitly stated in the mature MAX 9000 datasheet. The part is NRND; one Alibaba listing indicates ROHS3 compliance for current factory stock, but this should be verified per specific lot. AEC-Q100 not applicable for legacy programmable-logic devices of this generation.
Dados verificados em: 2026-09-13
— dados verificados e curados pela equipe de engenharia de componentes da XAIPART
Buscas relacionadas
EPM9560SRC208-7
EPM9560SRC208-7 datasheet
Altera MAX 9000 EPLD 12k gates
EPM9560 560 macrocell SQFP-208
208-pin SQFP CPLD programmable logic
EPM9560SRC208-7 vs EPM9560SRC208-10
EPM9560SRC208-7 drop-in replacement
buy EPM9560SRC208-7
EPM9560SRC208-7 price lead time
what is MAX 9000 EPLD
EPM9560 pinout SQFP-208 JTAG
industrial glue logic CPLD 5V 208-pin
Componentes & termos relacionados
Altera
Intel (Altera parent)
EPM9560SRC208-7
EPM9560
EPM9560SRC208-10
EPM9560RC208-7
EPM9320RC208-20
MAX 9000
EPLD
Erasable Programmable Logic Device
macrocell
Logic Array Block (LAB)
CMOS
EEPROM
IEEE Std 1149.1
JTAG
SQFP
RQFP
surface-mount
5 V supply
industrial temperature range
glue logic
address decoding
bus interface
in-system programming (ISP)
1 / 1