Analog Devices

ICL7106CPL+3 - 3.5-Digit LCD ADC | Analog Devices

N.º da peça: ICL7106CPL+3 ✓ Ativo
40-pin PDIP Package Internal clock circuit Speed
MOQ: 1 |

ICL7106CPL+3 Visão geral

The Analog Devices ICL7106CPL+3 is a monolithic 3.5-digit successive-approximation-style display A/D converter and direct LCD driver in a 40-pin PDIP package. It combines a 3.5-digit measurement range, seven-segment decoding, LCD segment and polarity drive, an internal voltage reference, and an internal clock in one low-power IC. The device directly drives non-multiplexed liquid-crystal displays without requiring separate display-drive circuitry.

An integrated A/D converter such as the ICL7106CPL+3 converts an analog input voltage into a digital code suitable for direct panel display. Within the ADC and data-acquisition hierarchy, it is a display-oriented integrating converter rather than a high-speed sampled ADC. Its true-differential input and reference arrangement support ratiometric measurements of resistance, resistance bridges, and other transducers where excitation drift and reference variation can be canceled.

The principal feature is integrated display control. The ICL7106CPL+3 includes seven-segment decoders, digit drivers, segment drivers, polarity drive, a voltage reference, and a clock circuit. This integration removes the need for external display multiplexers or driver ICs. The 3.5-digit resolution supports panel readings from 000 to 999 plus overrange indication, while the 40-pin PDIP package provides through-hole compatibility for laboratory, panel-meter, and industrial instrumentation designs.

The conversion system uses dual-slope integration, as identified in the ICL7106 documentation. Dual-slope operation averages the unknown input over a defined integration interval and compares the result with a reference, reducing sensitivity to periodic interference when the measurement is synchronized appropriately. The converter also includes a zero-integrator phase that eliminates overrange hangover and hysteresis effects identified by Analog Devices.

Typical uses include digital panel meters, laboratory meters, temperature indicators, weighing displays, resistance-measurement instruments, and ratiometric bridge or transducer readouts. The device is especially useful where the measured value must appear directly on a non-multiplexed LCD and where a complete display subsystem is required without adding a separate microcontroller and display driver.

When designing the circuit, follow the manufacturer's input, reference, clock, power, and LCD connection guidance exactly. Preserve the specified input impedance and reference arrangement, route sensitive analog and reference nets away from display drive traces, and account for LCD segment capacitance when selecting timing and PCB routing. Verify that the selected display uses the expected segment and polarity drive arrangement.

This page combines manufacturer product information, cross-reference findings, application guidance, and engineering-focused selection criteria. It highlights where ICL7106CPL+3 is appropriate, how its integrated LCD-driver architecture reduces external circuitry, and which documented alternatives share the 40-pin PDIP footprint for replacement planning.

Alternativas drop-in para ICL7106CPL+3 — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.

Variantes desta série

Modelos da mesma série compatíveis como drop-in com ICL7106CPL+3 (mesmo formato e footprint) — diferindo em Converter Architecture, Display Output, Integrated Clock, Integrated Reference.

Analog Devices
Converter Architecture: Monolithic successive-approximation A/D converter
Display Output: Direct drive for a nonmultiplexed liquid-crystal display
Integrated Clock: Yes; clock circuit included
Comparar com ICL7106CPL+3 →

ICL7106CPL+

✅ Drop-In
Analog Devices
📦 40-pin PDIP
3.5 digits · Monolithic successive-approximation A/D converter · Very high; numerical value not provided · Direct drive for a nonmultiplexed liquid-crystal display · Seven-segment decoder · Multiplexed LCD backplane driver · Yes; voltage reference included · Yes; clock circuit included

Consulte o preço

Ver ficha técnica →

ICL7106CPL-3

✅ Drop-In
📦 40-pin PDIP
Same 3.5-digit LCD converter and 40-pin PDIP format; 0 V output-voltage difference and 0-digit resolution difference, with the ordering suffix distinguishing the device code.

📋 Alternativa de referência (fora do catálogo)

ICL7106CPLZ

✅ Drop-In
📦 40-pin PDIP
Same 3.5-digit LCD converter and 40-pin PDIP format; 0 V output-voltage difference and 0-digit resolution difference, while manufacturer qualification and lifecycle terms require review.

📋 Alternativa de referência (fora do catálogo)

ICL7106CPL+

✅ Drop-In
Analog Devices
📦 40-pin PDIP
3.5 digits · Monolithic successive-approximation A/D converter · Very high; numerical value not provided · Direct drive for a nonmultiplexed liquid-crystal display · Seven-segment decoder · Multiplexed LCD backplane driver · Yes; voltage reference included · Yes; clock circuit included

Consulte o preço

Ver ficha técnica →

ICL7106CPL+3 Classificações máximas e características elétricas

Product Type 3.5-digit LCD display A/D converter
Converter Architecture Dual-slope A/D conversion
Measurement Resolution 3.5 digits
Display Output 7-segment LCD
Display Drive Method Direct, non-multiplexed LCD drive
Input Configuration True differential input
Integrated Reference Internal voltage reference
Integrated Clock Internal clock circuit
Integrated Functions Seven-segment decoders, display drivers, polarity drive, reference, and clock
Encapsulamento 40-pin PDIP
Package Body Width 0.600 in (15.24 mm)
Tipo de montagem Through-hole DIP
Overrange Behavior Zero-integrator phase eliminates overrange hangover and hysteresis effects
Production Status Production

Guia de Configuração de Pinos do ICL7106CPL+3 0.600 in (15.24 mm)

Configuração de pinos para ICL7106CPL+3 (pacote 0.600 in (15.24 mm)). Este componente analógico possui pinos de entrada, saída e alimentação. Consulte o datasheet do fabricante para configurações de offset null, compensação e pino de enable. Ideal para circuitos de condicionamento de sinal e amplificadores.

Diagrama de pinagem do pacote 0.600 in (15.24 mm) para ICL7106CPL+3

Nenhum dado detalhado de pinagem disponível para ICL7106CPL+3.

Consulte a ficha técnica para a configuração completa dos pinos.

Aplicações típicas

ICL7106CPL+3 é adequado para 6 aplicaçãos: Digital Panel Meters, Laboratory Digital Multimeters, Resistance and Bridge Measurement, Temperature and Process Indicators, Weighing and Load Indicator Displays, Educational and Service Instrumentation.

🔧

Digital Panel Meters

The ICL7106CPL+3 fits standalone digital panel meters because it combines a 3.5-digit A/D converter with seven-segment decoding, polarity drive, digit drivers, segment drivers, a reference, and a clock in one 40-pin PDIP device. Connect the measured analog signal to the true-differential input and route the converter outputs to a compatible non-multiplexed LCD. This integration eliminates a separate display-driver IC and reduces the number of interconnects that could introduce noise. The main trade-off is that the DIP footprint is larger than a surface-mount equivalent, but it remains convenient for instruments assembled through holes and easy to prototype, inspect, service, or replace.

🔧

Laboratory Digital Multimeters

The ICL7106CPL+3 is appropriate for a laboratory meter that displays resistance, voltage, or another slow-moving measurement directly on an LCD. Its 3.5-digit dual-slope conversion, true-differential input, internal reference, and internal clock provide the core measurement functions without requiring a separate display controller. The differential arrangement is particularly useful when the source and reference share an excitation path, enabling ratiometric behavior. For laboratory use, follow the manufacturer input and reference recommendations, use a stable display assembly, and isolate sensitive analog traces from LCD drive outputs to preserve measurement repeatability.

🔧

Resistance and Bridge Measurement

The ICL7106CPL+3 can support resistance, strain-bridge, and other ratiometric transducer measurements because its true-differential input and reference channels complement an excitation source. When the reference tracks the sensor excitation, common supply or excitation drift can be reduced, improving the usefulness of the displayed ratio. The device performs the conversion and directly drives a non-multiplexed seven-segment LCD, so the instrument does not need a separate display-driver stage. Select external sensitivity, excitation, and reference components according to the manufacturer guidance, and verify common-mode range and settling behavior for the actual bridge impedance.

🔧

Temperature and Process Indicators

The ICL7106CPL+3 is well matched to temperature indicators and industrial process readouts that need a stable numerical display rather than rapid sampling. A sensor interface can produce a differential voltage proportional to temperature, while the converter handles integration, decoding, and LCD drive. The internal clock and reference simplify the peripheral circuit, and the zero-integrator phase avoids the overrange hangover and hysteresis identified by the manufacturer. Keep the sensor path away from display-drive traces, provide stable decoupling at the supply pins, and choose the LCD and segment timing to match the non-multiplexed drive architecture.

🔧

Weighing and Load Indicator Displays

The ICL7106CPL+3 can form the measurement and display core of a compact weighing system because a load-cell bridge can be measured with differential excitation and reference connections. Its 3.5-digit readout is appropriate for basic commercial or laboratory scales, while the integrated display functions produce a direct numerical result without a separate LED or LCD driver. The dual-slope architecture favors stable readings under relatively slow measurement conditions. A practical design must use a suitable low-noise excitation source, protect the high-impedance input path, and account for the limited number of digits when specifying the scale's resolution and overload indication.

🔧

Educational and Service Instrumentation

The ICL7106CPL+3 is useful in educational meters and service instrumentation because one readable 40-pin DIP combines the converter and direct LCD drive. Students or technicians can inspect a complete signal chain from differential input through seven-segment decoding and display output without a microcontroller or complex display bus. The through-hole package also supports breadboard, educational, and repair-oriented assemblies where socketed DIP construction is convenient. To reproduce reliable results, follow the official grounding and decoupling guidance, use a compatible non-multiplexed display, and ensure that measurement speed and input impedance remain suitable for the source being tested.

What is the ICL7106CPL+3?
The ICL7106CPL+3 is a monolithic 3.5-digit LCD A/D converter with an integrated seven-segment decoder, display driver, polarity drive, voltage reference, and clock. According to the Analog Devices ICL7106 product page, it is a production device in the ICL7106 family. Its 40-pin PDIP package and direct non-multiplexed LCD output make it suitable for standalone panel instruments that do not require a separate display-driver IC.
What display and measurement capabilities does the ICL7106CPL+3 provide?
The ICL7106CPL+3 provides a 3.5-digit measurement display and seven-segment LCD drive. Manufacturer documentation identifies dual-slope A/D conversion, a true-differential input, and an internal reference. The display system includes segment and digit drivers, polarity drive, decoders, a reference, and a clock, allowing the converter to drive a compatible non-multiplexed liquid-crystal display without separate display-drive circuitry.
Why is the ICL7106CPL+3 suitable for panel meters and laboratory instruments?
The ICL7106CPL+3 suits panel meters because it integrates measurement conversion and direct LCD drive in one 40-pin PDIP device. Its true-differential input and reference arrangement support ratiometric measurements where excitation and reference changes can cancel. The internal clock, reference, polarity drive, and seven-segment decoder reduce the number of external components needed in standalone laboratory and industrial display products.
Where can I download the ICL7106CPL+3 datasheet PDF?
The official ICL7106CPL+3 datasheet is available through the Analog Devices ICL7106 product page at https://www.analog.com/en/products/icl7106.html. The linked documentation describes the 3.5-digit converter, integrated LCD functions, true-differential input, and zero-integrator phase. Use the manufacturer's pin-description table when assigning the 40-pin PDIP connections and when selecting the display interface.
Where can I find the ICL7106CPL+3 pinout?
The ICL7106CPL+3 pin assignment is published in the Analog Devices ICL7106 documentation and the linked manufacturer datasheet PDF. Use the 40-pin PDIP drawing for the exact analog, reference, clock, power, and LCD-drive connections. The device is supplied in a 40-pin PDIP package, approximately 0.600 in or 15.24 mm wide, so its through-hole footprint should not be confused with smaller surface-mount ADC packages.
What conversion technology does the ICL7106CPL+3 use?
The ICL7106CPL+3 uses a dual-slope A/D conversion system for its 3.5-digit measurement. The manufacturer product page identifies the true-differential input and reference as useful for ratiometric measurements. Dual-slope operation is appropriate for slow panel-meter readings where input averaging, reference comparison, and predictable behavior around zero are more important than high sampling speed.
Can the ICL7106CPL+3 drive an LCD directly?
Yes, the ICL7106CPL+3 directly drives compatible non-multiplexed liquid-crystal displays. According to the ICL7106 manufacturer materials, the IC includes seven-segment decoders, digit and segment drivers, polarity drive, a voltage reference, and a clock circuit. The connected LCD must use the segment arrangement and drive polarity expected by the device, and its electrical loading should remain within the datasheet operating limits.
Is the ICL7106CPL+3 suitable for resistance and bridge measurements?
The ICL7106CPL+3 is suitable for resistance and ratiometric bridge measurements because the Analog Devices product page describes true-differential input and reference channels. These connections help reject common-mode excitation drift when the measured quantity is referenced to the same source. Confirm the external resistor, source, and reference values against the manufacturer application guidance before using the device with a specific bridge geometry.
ICL7106CPL+3 vs ICL7106CPL+ - which is better for an existing 40-pin design?
Both devices are documented as 3.5-digit, seven-segment LCD converters in a 40-pin PDIP package, so an existing design can benefit from a common footprint. The ICL7106CPL+3 is the exact ordered target, while ICL7106CPL+ is a documented ordering variant. Final equivalence must be confirmed against the manufacturer ordering table for temperature grade, package suffix, production status, and electrical limits before substituting one MPN for the other.
What is the best Renesas equivalent for the ICL7106CPL+3?
The ICL7106CPLZ from Renesas Electronics is the documented cross-brand candidate in the same 40-pin PDIP family and is the closest named alternative identified by the ICL7106 cross-reference results. It retains the 3.5-digit, seven-segment LCD A/D converter concept. Verify pin assignments, supply limits, temperature grade, and display timing against both manufacturers' datasheets before treating it as a production drop-in replacement.
When should I choose the ICL7106CPL+3 instead of the ICL7107CPL?
Choose the ICL7106CPL+3 when the instrument requires direct LCD drive; choose the ICL7107CPL when the application requires the corresponding LED-display implementation. The two families share the broad 3.5-digit A/D-converter concept, but their display-driver outputs are not interchangeable. Confirm the complete electrical and pin compatibility before considering the ICL7107CPL for a PCB designed around the ICL7106CPL+3.
Where can I buy the ICL7106CPL+3 and request a quotation?
Use the Request a Quote form on this page to request current ICL7106CPL+3 pricing, stock confirmation, lead time, and minimum-order quantity. The quote team can also confirm package marking, authorized sourcing, and delivery quantity. Commercial terms can change, so a current quotation is more reliable than a historical catalog value when planning production procurement.
What is the current price of the ICL7106CPL+3?
Current ICL7106CPL+3 pricing is available through the Request a Quote form on this page. The form allows buyers to specify quantity and request an updated unit-price breakdown, stock status, and lead time. Because component pricing and availability fluctuate with inventory and demand, request a quote for the intended production quantity rather than relying on an old catalog amount.
What is the lead time and stock status for the ICL7106CPL+3?
Request the current ICL7106CPL+3 stock status, lead time, and minimum-order quantity through the Request a Quote form on this page. The form accepts the required quantity so procurement can confirm the appropriate 40-pin PDIP supply configuration and scheduled delivery. For new production schedules, request confirmation before committing the component to the assembly plan.
What can replace the ICL7106CPL+3 in a 40-pin LCD meter?
The named 40-pin candidates are ICL7106CPL+, ICL7106CPL-3, ICL7106CPLZ, and the original ICL7106CPL family. Each requires validation of pin assignments, supply voltage, temperature grade, LCD drive timing, and production status before replacement. A footprint match alone is not sufficient because display polarity, segment timing, reference implementation, and electrical limits must also match.
Is the ICL7106CPL+3 the same as the ICL7106CPL?
The ICL7106CPL+3 and ICL7106CPL share the 3.5-digit LCD A/D-converter function and 40-pin PDIP format, but they are distinct ordering codes. The meaning of the suffix must be taken from the manufacturer ordering information rather than inferred. Confirm the exact temperature range, device marking, and lifecycle status before treating one code as interchangeable with the other.
What are the key specifications of the ICL7106CPL+3 that engineers should know?
The key ICL7106CPL+3 specifications are 3.5-digit resolution, dual-slope conversion, true-differential input, internal reference and clock, seven-segment decoding, direct non-multiplexed LCD drive, and a 40-pin PDIP package. The Analog Devices product page also identifies a zero-integrator phase that removes overrange hangover and hysteresis effects. These features define it as a standalone display-meter converter rather than a general-purpose high-speed ADC.

Dados de referência de engenharia para ICL7106CPL+3 — comparação, orientação de projeto e informações de conformidade.

Guia de seleção

Choose the ICL7106CPL+3 when a standalone instrument needs a 3.5-digit measurement displayed directly on a compatible non-multiplexed LCD and the 40-pin PDIP format is acceptable. Its integrated reference, clock, decoders, polarity drive, and display drivers can reduce external circuitry, while the true-differential input supports ratiometric measurements. Select ICL7106CPL+ or ICL7106CPL-3 when the manufacturer's suffix definitions meet the required temperature grade or ordering conditions. Consider the Renesas ICL7106CPLZ or ICL7106CPL for an approved cross-brand sourcing program, but verify electrical limits, display timing, pin behavior, qualification, and lifecycle status. Do not select the ICL7107CPL as a direct replacement without redesigning for its LED-display outputs. No listed alternative should be approved based on the shared PDIP footprint alone.

Comparação com alternativas

Parâmetro Este produto ICL7106CPL+ ICL7106CPL-3 ICL7106CPLZ ICL7106CPL
Package 40-pin PDIP 40-pin PDIP 40-pin PDIP 40-pin PDIP 40-pin PDIP
Brand Analog Devices Analog Devices Analog Devices Renesas Electronics Renesas Electronics
Product Type 3.5-digit LCD display A/D converter 3.5-digit LCD display A/D converter 3.5-digit LCD display A/D converter 3.5-digit LCD display A/D converter 3.5-digit LCD display A/D converter
Measurement Resolution 3.5 digits 3.5 digits 3.5 digits 3.5 digits 3.5 digits
Conversion Architecture Dual-slope Dual-slope Dual-slope Dual-slope Dual-slope
Display Type 7-segment LCD 7-segment LCD 7-segment LCD 7-segment LCD 7-segment LCD
Input Configuration True differential True differential True differential True differential True differential
Display Drive Direct non-multiplexed LCD Direct non-multiplexed LCD Direct non-multiplexed LCD Direct non-multiplexed LCD Direct non-multiplexed LCD
Integrated Clock Yes Yes Yes Yes Yes

Principais diferenciais

  • Complete display subsystem in one converter IC (vs ICL7106CPL)
  • True-differential measurement architecture (vs ICL7106CPLZ)
  • Direct drive for non-multiplexed LCDs (vs ICL7107CPL)

Notas de projeto

Route the true-differential input and reference as a compact, matched pair, and keep them away from the LCD segment and digit-drive traces. The converter contains high-impedance measurement and reference paths, while display outputs carry switched capacitive loads. Preserving spatial separation reduces coupling from display activity into the measured value. Place the input and reference components close to the relevant device pins and provide a quiet ground-return path according to the manufacturer's layout example.

Use the manufacturer's supply, decoupling, and grounding recommendations exactly because this DIP device combines sensitive analog conversion with relatively high-current LCD drive. Place the principal bypass capacitor close to the supply pins and keep display-current returns from sharing the same narrow path as the analog reference. Check capacitor voltage rating, polarity, temperature coefficient, and effective capacitance at the operating frequency. A stable supply is especially important when the reference establishes the conversion ratio.

Do not assume that every ICL7106 ordering code is interchangeable merely because the packages match. Validate suffix-specific temperature grade, marking, lifecycle status, supply limits, and timing against the manufacturer ordering information. Also verify that the chosen LCD is non-multiplexed and has the expected segment and polarity arrangement. The ICL7107CPL family is not a direct substitute when the PCB requires LCD drive rather than the corresponding LED-display outputs.

Treat the analog input and reference as high-impedance measurement nodes, and avoid long parallel copper runs next to LCD outputs. Connect sensor excitation and reference paths so common-mode variation is rejected by the differential input. If measuring a slow bridge or resistive sensor, keep connector and wiring leakage small relative to the intended source impedance. Validate settling and noise at the actual source impedance rather than relying only on the converter's headline resolution.

Informações de conformidade

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Sem chumbo
Unknown
Sem halogênios
Unknown
Minerais de conflito
Unknown

The Analog Devices product page identifies the ICL7106 family as production. Specific RoHS, REACH, lead-free, halogen-free, and conflict-minerals statements were not identified for this exact ordering code.

Dados verificados em: 2026-11-20 — dados verificados e curados pela equipe de engenharia de componentes da XAIPART

Buscas relacionadas

ICL7106CPL+3 datasheet ICL7106CPL+3 pinout ICL7106CPL+3 datasheet pdf ICL7106CPL+3 equivalent ICL7106CPL+3 replacement ICL7106CPL+3 cross reference ICL7106CPL+3 footprint ICL7106CPL+3 schematic Analog Devices ICL7106CPL+3 ICL7106CPL+3 price ICL7106CPL+3 stock ICL7106CPL+3 vs ICL7106CPL+ 3.5 digit direct LCD ADC 40-pin PDIP display driver

Componentes & termos relacionados

Analog Devices ICL7106CPL+3 ICL7106CPL+ ICL7106CPL-3 ICL7106CPLZ ICL7106CPL Renesas Electronics ICL7107CPL 3.5-digit A/D converter dual-slope ADC direct LCD driver seven-segment decoder true-differential input ratiometric measurement voltage reference internal clock non-multiplexed LCD 40-pin PDIP DIP package family through-hole package digital panel meter resistance bridge weighting display process indicator
RFQ de cotação rápida
Preencha todos os detalhes — nossa equipe de vendas responderá em até 24 horas
Part number Fabricante Encapsulamento QTY Preço-alvo Total
✓
Cotação enviada!

Responderemos seu e-mail em até 24 horas

1
RFQ enviada
2
Cotação recebida
3
Pedido realizado
4
Pagamento
5
Enviado
6
Entregue
Ver detalhes da RFQ