Renesas Electronics

ISL8391IB-T - Quad SPST Analog Switch, 35Ω, 16-SOIC

N.º da peça: ISL8391IB-T ✗ Fim de vida
+2 V to +12 V Vdss 2.5 nA Id 35 ohm Rds(on) 16-pin SOIC Package
MOQ: 1 |

ISL8391IB-T Visão geral

Renesas Electronics ISL8391IB-T is a precision quad SPST analog switch with a 1:1 configuration and 35 Ω on-resistance, housed in a 16-pin SOIC package. The device operates from a single +2 V to +12 V supply or a dual ±2 V to ±6 V supply, making it suitable for low-voltage signal routing, battery-powered systems, instrumentation, and communication equipment. Its four independent switches provide selectable connection paths between analog input and output terminals.

An analog switch is a semiconductor device that routes low-frequency electrical signals with minimal distortion. The SPST designation means each of the four channels has a single-pole, single-throw configuration, giving it one signal path per switch. As part of the broader interface-IC hierarchy, the ISL8391 combines CMOS switching circuitry, low power consumption, low leakage, and fast switching behavior in a standard surface-mount package.

Key characteristics include 35 Ω on-resistance, operation from +2 V to +12 V in single-supply mode, operation from ±2 V to ±6 V in dual-supply mode, and low power consumption of approximately 1 µW in the intended low-power application condition. Maximum leakage current is listed as 2.5 nA. These characteristics help preserve signal integrity when the device handles external measurement, control, or sensor signals rather than high-speed data lanes.

The four SPST channels allow a system to connect one source to one destination per channel, making the device useful for sample-and-hold routing, test-point multiplexing, signal isolation, and peripheral selection. Its CMOS implementation supports compact, low-power designs where supply current, off-state leakage, and predictable off-state behavior are important. The 16-pin SOIC footprint supports conventional surface-mount assembly and PCB routing patterns.

Typical applications include battery-operated measurement equipment, portable test systems, data-acquisition modules, industrial control interfaces, and low-voltage analog signal conditioning. In these systems, the device can isolate inactive sensors, route a selected source to an amplifier or converter, or protect downstream circuitry by disconnecting external nodes. Supply selection depends on the signal swing and system grounding arrangement.

When designing around the ISL8391IB-T, verify signal levels against the permitted input and output voltage ranges, account for 35 Ω on-resistance in the signal-path budget, and use a common ground reference when operating from dual supplies. Place bypass capacitance close to the supply pins and route high-impedance signal traces away from noisy switching nodes. The manufacturer datasheet pin-description table should be used directly when assigning PCB functions.

This product overview combines the electrical characteristics, package information, application guidance, replacement considerations, and design notes engineers need when evaluating the ISL8391IB-T for a new analog-routing design. Use the Request a Quote form on this page for current commercial availability, lead time, and sourcing support.

Alternativas drop-in para ISL8391IB-T — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.

Variantes desta série

Modelos da mesma série compatíveis como drop-in com ISL8391IB-T (mesmo formato e footprint) — diferindo em Package, Switch Configuration, Dual-Supply Operating Range, Dual-Supply Voltage Range, Power Consumption.

Renesas Electronics
Package: 16-SOIC
Switch Configuration: 1:1
Dual-Supply Operating Range: ±2 V to ±6 V
Comparar com ISL8391IB-T →
Renesas Electronics
Package: 16-lead SOIC
Switch Configuration: 4 x SPST
Dual-Supply Voltage Range: ±2 V to ±6 V
Comparar com ISL8391IB-T →
Renesas Electronics
Package: 20-pin SOIC
Switch Configuration: 2:1 SPDT per circuit
Dual-Supply Voltage Range: +/-2 V to +/-6 V
Comparar com ISL8391IB-T →

ISL8394IB-T

✅ Drop-In
Renesas Electronics
📦 16-pin SOIC
Quad SPDT analog switch · 4 circuits · 2:1 SPDT per circuit · 17 ohm · 35 ohm · 1 ohm · +2 V to +12 V · +/-2 V to +/-6 V

Consulte o preço

Ver ficha técnica →

ISL8392IB-T

✅ Drop-In ⚠️ Especificações não verificadas
Renesas Electronics
📦 16-pin SOIC
4 circuits · 1:1 · Quad SPST · 35 ohm · 4 ohm maximum · +2 V to +12 V · ±2 V to ±6 V · 1 µW

Consulte o preço

Ver ficha técnica →

ISL8393IB-T

✅ Drop-In ⚠️ Especificações não verificadas
Renesas Electronics
📦 16-pin SOIC
CMOS precision quad analog switch · 4 circuits · 4 x SPST · 1:1 · 35 ohm · +2 V to +12 V · ±2 V to ±6 V · 1 uW

Consulte o preço

Ver ficha técnica →

ISL8391IB-T Classificações máximas e características elétricas

Product Type Quad SPST analog switch
Number of Circuits 4 circuits
Multiplexer Configuration 1:1
On-Resistance 35 ohm
Single-Supply Operating Range +2 V to +12 V
Dual-Supply Operating Range +/-2 V to +/-6 V
Low Power Consumption 1 uW
Maximum Leakage Current 2.5 nA
Technology CMOS
Encapsulamento 16-pin SOIC
Tipo de montagem Surface mount
Terminal Count 16 terminals
Switching Configuration SPST

Guia de Configuração de Pinos do ISL8391IB-T 16-pin soic

Configuração de pinos para ISL8391IB-T (pacote 16-pin soic). A numeração dos pinos, funções e diagramas de conexão estão definidos no datasheet do fabricante. Consulte-o para o footprint exato e diretrizes de soldagem.

Diagrama de pinagem do pacote 16-pin soic para ISL8391IB-T

Nenhum dado detalhado de pinagem disponível para ISL8391IB-T.

Consulte a ficha técnica para a configuração completa dos pinos.

Aplicações típicas

ISL8391IB-T é adequado para 6 aplicaçãos: Battery-Powered Measurement Equipment, Data Acquisition Signal Routing, Test and Measurement Systems, Industrial Control Interfaces, Portable Sensor Interfaces, Battery-Powered Communication Equipment.

🔋

Battery-Powered Measurement Equipment

The ISL8391IB-T fits battery-powered measurement equipment because it supports a +2 V to +12 V single-supply range, consumes approximately 1 uW in the cited low-power condition, and limits leakage to 2.5 nA. Its four SPST channels can route a selected sensor output to an amplifier or measurement converter while isolating inactive inputs. The 35 ohm on-resistance should be included in the source-impedance calculation, particularly when measuring high-value sensors whose output impedance is comparable to the switch resistance.

📊

Data Acquisition Signal Routing

The ISL8391IB-T can route four low-frequency analog signals in a data-acquisition module. Each SPST channel provides a dedicated one-to-one path, allowing an instrument to connect a selected sensor, reference, or test input to downstream circuitry. Its 35 ohm on-resistance is practical for many medium-impedance sources, while the 2.5 nA maximum leakage helps reduce errors in high-impedance measurements. Confirm switch timing and permitted signal swing against the acquisition settling requirements.

🧪

Test and Measurement Systems

The ISL8391IB-T is useful in automated test equipment for connecting and disconnecting external nodes without placing a relay in every signal path. Four independently controlled SPST switches can isolate instruments, route excitation to a device under test, or select among test inputs. The low-power CMOS design supports compact portable testers, and the 16-pin SOIC package simplifies conventional surface-mount assembly. The system designer should still account for 35 ohm insertion resistance and control-pin timing.

🏭

Industrial Control Interfaces

The ISL8391IB-T can isolate and route sensor or control signals in industrial interface modules when the signal amplitudes remain within the device's specified voltage limits. Single-supply operation from +2 V to +12 V fits many embedded control systems, while dual operation from ±2 V to ±6 V supports bipolar signaling. The four SPST channels offer independent routing without the continuous power burden of multiple relay stages, although the 35 ohm path resistance must be checked against the interface impedance.

🧩

Portable Sensor Interfaces

The ISL8391IB-T is suitable for portable sensor interfaces that need to share a common analog front end. Its four SPST channels can connect one sensor at a time to an amplifier or converter, disconnect inactive sensors, and reduce loading through low leakage of up to 2.5 nA. Operation from +2 V to +12 V accommodates several battery-derived rails. When the sensor has very high output impedance, validate the 35 ohm switch resistance and the complete leakage budget during signal-chain design.

🌐

Battery-Powered Communication Equipment

The ISL8391IB-T can support signal routing in compact battery-powered communication equipment where a +2 V to +12 V single supply and low power consumption are important. Four independent switch channels can control audio, control, or low-frequency measurement paths without operating mechanical relays continuously. The CMOS architecture, approximately 1 uW low-power condition, and 2.5 nA maximum leakage support portable-system objectives. Use the manufacturer data for switch timing, charge injection, and maximum signal-level checks.

What is the ISL8391IB-T and what are its main specifications?
The ISL8391IB-T is a Renesas Electronics CMOS analog switch containing four independent SPST channels in a 16-pin SOIC package. According to the Renesas product page, it provides a 1:1 configuration, 35 ohm on-resistance, single-supply operation from +2 V to +12 V, and dual-supply operation from ±2 V to ±6 V. Maximum leakage is 2.5 nA, and low power consumption is approximately 1 uW in the cited application condition. These figures position the device for low-voltage, precision signal-routing circuits.
What is the operating voltage of ISL8391IB-T?
The ISL8391IB-T operates from +2 V to +12 V with a single supply or from ±2 V to ±6 V with dual supplies. According to the Renesas product page, these two ranges support both battery-powered and bipolar-signal systems. The selected range must remain compatible with every signal applied to the switch terminals. Review the absolute maximum and recommended operating limits in the manufacturer datasheet before finalizing rail selection.
How many independent switches does ISL8391IB-T contain?
The ISL8391IB-T contains four independent SPST analog switches. According to the Renesas product description, each switch provides a single-pole, single-throw signal path, allowing four source-to-destination connections to be managed in one package. The device is described as a 1:1 analog switch with 35 ohm on-resistance. This makes it suitable for four-channel routing, isolation, test-point selection, or peripheral-selection tasks.
What is the on-resistance of ISL8391IB-T?
The ISL8391IB-T has a maximum stated on-resistance of 35 ohm. According to the Renesas product page, this resistance appears in the closed switch path and must be included when calculating insertion loss and settling behavior. The practical impact becomes more important with high source impedances, long signal paths, or applications in which the switch resistance approaches the impedance of the measured source.
Where can I download the ISL8391IB-T datasheet PDF?
The official ISL8391IB-T datasheet is accessible through the Renesas product page for ISL8391, which links the family documentation and product details. The component is documented as a low-voltage, single- and dual-supply quad SPST analog switch. Use the manufacturer document for the authoritative pin descriptions, recommended operating limits, electrical characteristics, and package drawings rather than relying on a distributor summary.
Where can I find the ISL8391IB-T pinout?
The ISL8391IB-T pinout is shown in the Renesas family datasheet associated with the ISL8391 product page. The component uses a 16-pin SOIC package with four SPST channels and separate control and supply connections. Before assigning signals, use the pin-description table and package drawing in the manufacturer datasheet to identify each switch terminal, common terminal, control input, supply, and ground connection.
What can replace the ISL8391IB-T on the same PCB?
The ISL8394IB-T is the closest documented cross-reference candidate identified for the ISL8391IB-T, but final substitution requires confirmation of pin-level compatibility and electrical parameters. The Renesas ISL8391 family includes related quad SPST devices, yet channel and control arrangements can differ between family members. Treat the cross-reference result as a starting point for engineering review rather than an unconditional replacement.
Is the ISL8391IB-T suitable for battery-powered instruments?
The ISL8391IB-T is suitable for many battery-powered instruments because it supports a +2 V to +12 V single-supply range and has low power consumption of approximately 1 uW. According to the Renesas product description, the low-power and 2.5 nA maximum leakage characteristics are intended to benefit portable equipment. The complete power budget should also include control-pin current and leakage from the surrounding circuit.
What is the difference between single-supply and dual-supply operation for ISL8391IB-T?
Single-supply operation uses one rail from +2 V to +12 V, while dual-supply operation uses positive and negative rails from ±2 V to ±6 V. According to the Renesas product page, dual supplies permit bipolar signal routing with a ground reference at zero volts. Single-supply systems are generally simpler, but signal amplitudes must remain within the device's input and output limits relative to the actual rail voltage.
When should I choose the ISL8391IB-T over a discrete switch implementation?
Choose the ISL8391IB-T when the design needs four coordinated, low-leakage signal paths in a compact surface-mount package. Its 35 ohm on-resistance, 2.5 nA maximum leakage, low-power CMOS implementation, and +2 V to +12 V single-supply capability simplify routing compared with multiple discrete switch networks. A discrete implementation may still be preferable when very low on-resistance, higher current, or a voltage range above +12 V dominates the design.
Is the ISL8391IB-T suitable for data acquisition and test systems?
The ISL8391IB-T is well suited to low-level data-acquisition and test routing because it provides four SPST channels with 35 ohm on-resistance and low leakage. According to the Renesas family description, the device is intended for battery-powered equipment and precision CMOS switching. Its switching resistance should be included in the input-impedance calculation, while control timing should be checked against the acquisition settling requirement.
What should I verify before using an alternative to ISL8391IB-T?
Verify the footprint, pin names, control polarity, switch topology, supply range, on-resistance, leakage, switching time, and maximum signal voltage before accepting an alternative. A shared 16-pin SOIC outline does not by itself prove pin-to-pin compatibility. Compare the alternative against the ISL8391IB-T manufacturer datasheet and confirm the actual assembled part suffix, including temperature grade and shipping format.
How do I minimize signal errors when using ISL8391IB-T?
Minimize signal errors by accounting for the 35 ohm on-resistance, keeping switch control transitions away from sensitive analog traces, and using a low-impedance source where possible. According to the Renesas family description, the device provides fast switching and low leakage, but external layout still affects settling and crosstalk. Use a common ground plane, short signal paths, and bypass capacitance located close to the supply pins.
Is the ISL8391IB-T still available for new designs?
The Renesas product page states that support is limited to customers who have already adopted the ISL8391 family, which is consistent with an nrnd lifecycle classification. For a new production design, confirm lifecycle status, availability, and the exact orderable suffix before releasing the schematic. Use the Request a Quote form on this page for current sourcing and lead-time information.
Where can I buy ISL8391IB-T and check current stock and lead time?
Use the Request a Quote form on this page to request ISL8391IB-T pricing, stock confirmation, minimum order quantity, and lead time from XAIPART. The ISL8391IB-T is the -T orderable variant of the 16-SOIC quad SPST switch, so the requested quantity and target delivery date should be stated clearly. Commercial terms can change, so confirm them directly when placing an order.
What is the price of ISL8391IB-T?
Current ISL8391IB-T pricing is best obtained through the Request a Quote form on this page, where the quantity break and delivery requirements can be entered. The part is a 4-circuit, 1:1, 35 ohm SPST analog switch in a 16-pin SOIC package. Requesting a quote against the exact ISL8391IB-T suffix avoids ambiguity with other package, temperature-grade, or shipping variants.
Is ISL8391IB-T in stock and what is its lead time?
Request current ISL8391IB-T stock, minimum order quantity, and lead time through the Request a Quote form on this page. The manufacturer describes support as limited to customers that have already adopted the ISL8391 family, making lifecycle confirmation important for new programs. Include the required quantity, delivery date, and permitted alternate manufacturer suffix when requesting commercial support.
What are the key specifications of ISL8391IB-T that engineers should know?
The key ISL8391IB-T specifications are four SPST channels, 1:1 configuration, 35 ohm on-resistance, and a 16-pin SOIC package. According to the Renesas product page, it operates from +2 V to +12 V in single-supply mode or ±2 V to ±6 V in dual-supply mode, with approximately 1 uW low-power consumption and 2.5 nA maximum leakage. These figures define its suitability for low-voltage precision routing.
Can an ISL8391IB-T replace another quad analog switch?
The ISL8391IB-T can replace another device only when the alternate component has an identical footprint, matching switch and control pin assignments, compatible control polarity, and electrical ratings that satisfy the application. The ISL8394IB-T appears as a related cross-reference candidate, while other family members may use different control arrangements. Verify every pin and parameter against the manufacturer datasheet before approving a substitution.

Dados de referência de engenharia para ISL8391IB-T — comparação, orientação de projeto e informações de conformidade.

Guia de seleção

Choose the ISL8391IB-T for compact low-voltage analog routing that requires four independent SPST channels, a 35 ohm on-resistance, and operation from +2 V to +12 V or ±2 V to ±6 V. It is especially suitable for battery-powered instruments, data-acquisition modules, sensor interfaces, and portable test equipment where low power consumption and low leakage matter. Consider the ISL8394IB-T only after confirming its on-resistance, leakage, control arrangement, and pin functions against the ISL8391 target. Evaluate ISL8392IB-T or ISL8393IB-T when their switch topology and control mapping meet the circuit requirements, but do not assume that a common 16-pin SOIC package guarantees drop-in compatibility. A discrete switch network may be better when current handling, very low resistance, or operation above +12 V is required.

Comparação com alternativas

Parâmetro Este produto ISL8394IB-T ISL8392IB-T ISL8393IB-T
Brand Renesas Electronics Renesas Electronics Renesas Electronics Renesas Electronics
Package 16-pin SOIC 16-pin SOIC 16-pin SOIC 16-pin SOIC

Principais diferenciais

  • Defined low-voltage operating flexibility (vs ISL8394IB-T)
  • Low leakage for sensitive analog routing (vs ISL8392IB-T)
  • Compact four-channel integration (vs ISL8393IB-T)

Notas de projeto

Include the 35 ohm switch on-resistance in the complete signal-path impedance. This is especially important for high-impedance sensors because the switch resistance can interact with input capacitance and establish a low-pass pole. Keep analog traces short, use a common reference plane, and place downstream amplifiers close enough to minimize additional board-level capacitance and susceptibility to interference.

Route each switched node as a continuous analog trace where possible, avoiding long shared paths that could couple switching transients into sensitive channels. Keep control traces away from high-impedance input and output pins, use a solid ground plane, and terminate unused inputs and outputs according to the manufacturer datasheet. Verify the exact control and common-pin assignments before finalizing the PCB footprint.

Place the required bypass capacitor close to the supply and ground pins and follow the manufacturer layout guidance for the 16-pin SOIC package. Check startup behavior, control-pin sequencing, and rail limits for both +2 V to +12 V single-supply operation and ±2 V to ±6 V dual-supply operation. The quoted 1 uW power figure should not be treated as the total system consumption without considering control and leakage currents.

Do not substitute an ISL839x family member solely because it uses a 16-pin SOIC outline. Compare pin numbers, common terminals, control polarity, switch topology, recommended supply range, on-resistance, leakage, and signal-voltage limits. A drop-in decision also requires confirming that the assembled suffix matches the required temperature grade and shipment method.

Informações de conformidade

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Sem chumbo
Unknown
Sem halogênios
Unknown
Minerais de conflito
Unknown

The component is an industrial-style analog switch rather than an automotive-qualified device. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status require confirmation from current manufacturer or lot documentation.

Buscas relacionadas

ISL8391IB-T datasheet ISL8391IB-T pinout ISL8391IB-T datasheet pdf ISL8391IB-T equivalent ISL8391IB-T replacement ISL8391IB-T cross reference ISL8391IB-T footprint ISL8391IB-T price ISL8391IB-T stock Renesas ISL8391IB-T ISL8391IB-T 35 ohm switch ISL8391 16 SOIC analog switch ISL8391IB-T battery powered equipment ISL8391IB-T vs ISL8394IB-T

Componentes & termos relacionados

Renesas Electronics ISL8391IB-T ISL8391 ISL8392IB-T ISL8393IB-T ISL8394IB-T quad SPST analog switch CMOS analog switch single-pole single-throw switch SPST interface IC signal switch on-resistance 35 ohm off-state leakage 2.5 nA single-supply operation dual-supply operation +2 V to +12 V plus or minus 2 V to plus or minus 6 V 16-pin SOIC surface-mount package battery-powered equipment data acquisition precision signal routing
RFQ de cotação rápida
Preencha todos os detalhes — nossa equipe de vendas responderá em até 24 horas
Part number Fabricante Encapsulamento QTY Preço-alvo Total
✓
Cotação enviada!

Responderemos seu e-mail em até 24 horas

1
RFQ enviada
2
Cotação recebida
3
Pedido realizado
4
Pagamento
5
Enviado
6
Entregue
Ver detalhes da RFQ