ISL8391IB-T - Quad SPST Analog Switch, 35Ω, 16-SOIC
Teilenummer: ISL8391IB-T ✗ AbgekündigtISL8391IB-T Übersicht
An analog switch is a semiconductor device that routes low-frequency electrical signals with minimal distortion. The SPST designation means each of the four channels has a single-pole, single-throw configuration, giving it one signal path per switch. As part of the broader interface-IC hierarchy, the ISL8391 combines CMOS switching circuitry, low power consumption, low leakage, and fast switching behavior in a standard surface-mount package.
Key characteristics include 35 Ω on-resistance, operation from +2 V to +12 V in single-supply mode, operation from ±2 V to ±6 V in dual-supply mode, and low power consumption of approximately 1 µW in the intended low-power application condition. Maximum leakage current is listed as 2.5 nA. These characteristics help preserve signal integrity when the device handles external measurement, control, or sensor signals rather than high-speed data lanes.
The four SPST channels allow a system to connect one source to one destination per channel, making the device useful for sample-and-hold routing, test-point multiplexing, signal isolation, and peripheral selection. Its CMOS implementation supports compact, low-power designs where supply current, off-state leakage, and predictable off-state behavior are important. The 16-pin SOIC footprint supports conventional surface-mount assembly and PCB routing patterns.
Typical applications include battery-operated measurement equipment, portable test systems, data-acquisition modules, industrial control interfaces, and low-voltage analog signal conditioning. In these systems, the device can isolate inactive sensors, route a selected source to an amplifier or converter, or protect downstream circuitry by disconnecting external nodes. Supply selection depends on the signal swing and system grounding arrangement.
When designing around the ISL8391IB-T, verify signal levels against the permitted input and output voltage ranges, account for 35 Ω on-resistance in the signal-path budget, and use a common ground reference when operating from dual supplies. Place bypass capacitance close to the supply pins and route high-impedance signal traces away from noisy switching nodes. The manufacturer datasheet pin-description table should be used directly when assigning PCB functions.
This product overview combines the electrical characteristics, package information, application guidance, replacement considerations, and design notes engineers need when evaluating the ISL8391IB-T for a new analog-routing design. Use the Request a Quote form on this page for current commercial availability, lead time, and sourcing support.
Drop-in-Alternativen für ISL8391IB-T – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.
Varianten dieser Serie
Modelle derselben Serie, die drop-in-kompatibel sind mit ISL8391IB-T (gleiche Bauform und Footprint) – abweichend in Package, Switch Configuration, Dual-Supply Operating Range, Dual-Supply Voltage Range, Power Consumption.
ISL8394IB-T
✅ Drop-InPreis auf Anfrage
Datenblatt ansehen →ISL8392IB-T
✅ Drop-In ⚠️ Spezifikationen ungeprüftPreis auf Anfrage
Datenblatt ansehen →ISL8393IB-T
✅ Drop-In ⚠️ Spezifikationen ungeprüftPreis auf Anfrage
Datenblatt ansehen →ISL8391IB-T Grenzwerte & elektrische Eigenschaften
| Product Type | Quad SPST analog switch |
| Number of Circuits | 4 circuits |
| Multiplexer Configuration | 1:1 |
| On-Resistance | 35 ohm |
| Single-Supply Operating Range | +2 V to +12 V |
| Dual-Supply Operating Range | +/-2 V to +/-6 V |
| Low Power Consumption | 1 uW |
| Maximum Leakage Current | 2.5 nA |
| Technology | CMOS |
| Gehäuse | 16-pin SOIC |
| Montageart | Surface mount |
| Terminal Count | 16 terminals |
| Switching Configuration | SPST |
ISL8391IB-T 16-pin soic Pinbelegungsleitfaden
Pinbelegung für ISL8391IB-T (16-pin soic-Gehäuse). Pin-Nummerierung, Funktionen und Anschlussdiagramme sind im Herstellerdatenblatt definiert. Entnehmen Sie diesem den genauen Footprint und Lötrichtlinien.
Keine detaillierten Pinbelegungsdaten verfügbar für ISL8391IB-T.
Siehe die Datenblatt für die vollständige Pin-Konfiguration.
Typische Anwendungen
ISL8391IB-T ist geeignet für 6 Anwendungs: Battery-Powered Measurement Equipment, Data Acquisition Signal Routing, Test and Measurement Systems, Industrial Control Interfaces, Portable Sensor Interfaces, Battery-Powered Communication Equipment.
Battery-Powered Measurement Equipment
The ISL8391IB-T fits battery-powered measurement equipment because it supports a +2 V to +12 V single-supply range, consumes approximately 1 uW in the cited low-power condition, and limits leakage to 2.5 nA. Its four SPST channels can route a selected sensor output to an amplifier or measurement converter while isolating inactive inputs. The 35 ohm on-resistance should be included in the source-impedance calculation, particularly when measuring high-value sensors whose output impedance is comparable to the switch resistance.
Empfohlen
Data Acquisition Signal Routing
The ISL8391IB-T can route four low-frequency analog signals in a data-acquisition module. Each SPST channel provides a dedicated one-to-one path, allowing an instrument to connect a selected sensor, reference, or test input to downstream circuitry. Its 35 ohm on-resistance is practical for many medium-impedance sources, while the 2.5 nA maximum leakage helps reduce errors in high-impedance measurements. Confirm switch timing and permitted signal swing against the acquisition settling requirements.
Empfohlen
Test and Measurement Systems
The ISL8391IB-T is useful in automated test equipment for connecting and disconnecting external nodes without placing a relay in every signal path. Four independently controlled SPST switches can isolate instruments, route excitation to a device under test, or select among test inputs. The low-power CMOS design supports compact portable testers, and the 16-pin SOIC package simplifies conventional surface-mount assembly. The system designer should still account for 35 ohm insertion resistance and control-pin timing.
Empfohlen
Industrial Control Interfaces
The ISL8391IB-T can isolate and route sensor or control signals in industrial interface modules when the signal amplitudes remain within the device's specified voltage limits. Single-supply operation from +2 V to +12 V fits many embedded control systems, while dual operation from ±2 V to ±6 V supports bipolar signaling. The four SPST channels offer independent routing without the continuous power burden of multiple relay stages, although the 35 ohm path resistance must be checked against the interface impedance.
Empfohlen
Portable Sensor Interfaces
The ISL8391IB-T is suitable for portable sensor interfaces that need to share a common analog front end. Its four SPST channels can connect one sensor at a time to an amplifier or converter, disconnect inactive sensors, and reduce loading through low leakage of up to 2.5 nA. Operation from +2 V to +12 V accommodates several battery-derived rails. When the sensor has very high output impedance, validate the 35 ohm switch resistance and the complete leakage budget during signal-chain design.
Empfohlen
Battery-Powered Communication Equipment
The ISL8391IB-T can support signal routing in compact battery-powered communication equipment where a +2 V to +12 V single supply and low power consumption are important. Four independent switch channels can control audio, control, or low-frequency measurement paths without operating mechanical relays continuously. The CMOS architecture, approximately 1 uW low-power condition, and 2.5 nA maximum leakage support portable-system objectives. Use the manufacturer data for switch timing, charge injection, and maximum signal-level checks.
Empfohlen
Zusammenfassung der empfohlenen Produkte
Technische Referenzdaten für ISL8391IB-T – Vergleich, Designhinweise und Compliance-Informationen.
Auswahlhilfe
Vergleich mit Alternativen
| Parameter | Dieses Produkt | ISL8394IB-T | ISL8392IB-T | ISL8393IB-T |
|---|---|---|---|---|
| Brand | Renesas Electronics | Renesas Electronics | Renesas Electronics | Renesas Electronics |
| Package | 16-pin SOIC | 16-pin SOIC | 16-pin SOIC | 16-pin SOIC |
Wichtigste Unterscheidungsmerkmale
- Defined low-voltage operating flexibility (vs. ISL8394IB-T)
- Low leakage for sensitive analog routing (vs. ISL8392IB-T)
- Compact four-channel integration (vs. ISL8393IB-T)
Designhinweise
Include the 35 ohm switch on-resistance in the complete signal-path impedance. This is especially important for high-impedance sensors because the switch resistance can interact with input capacitance and establish a low-pass pole. Keep analog traces short, use a common reference plane, and place downstream amplifiers close enough to minimize additional board-level capacitance and susceptibility to interference.
Route each switched node as a continuous analog trace where possible, avoiding long shared paths that could couple switching transients into sensitive channels. Keep control traces away from high-impedance input and output pins, use a solid ground plane, and terminate unused inputs and outputs according to the manufacturer datasheet. Verify the exact control and common-pin assignments before finalizing the PCB footprint.
Place the required bypass capacitor close to the supply and ground pins and follow the manufacturer layout guidance for the 16-pin SOIC package. Check startup behavior, control-pin sequencing, and rail limits for both +2 V to +12 V single-supply operation and ±2 V to ±6 V dual-supply operation. The quoted 1 uW power figure should not be treated as the total system consumption without considering control and leakage currents.
Do not substitute an ISL839x family member solely because it uses a 16-pin SOIC outline. Compare pin numbers, common terminals, control polarity, switch topology, recommended supply range, on-resistance, leakage, and signal-voltage limits. A drop-in decision also requires confirming that the assembled suffix matches the required temperature grade and shipment method.
Compliance-Informationen
The component is an industrial-style analog switch rather than an automotive-qualified device. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status require confirmation from current manufacturer or lot documentation.