ISL8391IB-T - Quad SPST Analog Switch, 35Ω, 16-SOIC
部品番号: ISL8391IB-T ✗ 生産終了ISL8391IB-T 概要
An analog switch is a semiconductor device that routes low-frequency electrical signals with minimal distortion. The SPST designation means each of the four channels has a single-pole, single-throw configuration, giving it one signal path per switch. As part of the broader interface-IC hierarchy, the ISL8391 combines CMOS switching circuitry, low power consumption, low leakage, and fast switching behavior in a standard surface-mount package.
Key characteristics include 35 Ω on-resistance, operation from +2 V to +12 V in single-supply mode, operation from ±2 V to ±6 V in dual-supply mode, and low power consumption of approximately 1 µW in the intended low-power application condition. Maximum leakage current is listed as 2.5 nA. These characteristics help preserve signal integrity when the device handles external measurement, control, or sensor signals rather than high-speed data lanes.
The four SPST channels allow a system to connect one source to one destination per channel, making the device useful for sample-and-hold routing, test-point multiplexing, signal isolation, and peripheral selection. Its CMOS implementation supports compact, low-power designs where supply current, off-state leakage, and predictable off-state behavior are important. The 16-pin SOIC footprint supports conventional surface-mount assembly and PCB routing patterns.
Typical applications include battery-operated measurement equipment, portable test systems, data-acquisition modules, industrial control interfaces, and low-voltage analog signal conditioning. In these systems, the device can isolate inactive sensors, route a selected source to an amplifier or converter, or protect downstream circuitry by disconnecting external nodes. Supply selection depends on the signal swing and system grounding arrangement.
When designing around the ISL8391IB-T, verify signal levels against the permitted input and output voltage ranges, account for 35 Ω on-resistance in the signal-path budget, and use a common ground reference when operating from dual supplies. Place bypass capacitance close to the supply pins and route high-impedance signal traces away from noisy switching nodes. The manufacturer datasheet pin-description table should be used directly when assigning PCB functions.
This product overview combines the electrical characteristics, package information, application guidance, replacement considerations, and design notes engineers need when evaluating the ISL8391IB-T for a new analog-routing design. Use the Request a Quote form on this page for current commercial availability, lead time, and sourcing support.
ドロップイン代替品: ISL8391IB-T — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: ISL8391IB-T (同一形状・フットプリント) — 相違点: Package, Switch Configuration, Dual-Supply Operating Range, Dual-Supply Voltage Range, Power Consumption.
ISL8394IB-T
✅ ドロップイン価格はお問い合わせください
データシートを見る →ISL8392IB-T
✅ ドロップイン ⚠️ 仕様未検証価格はお問い合わせください
データシートを見る →ISL8393IB-T
✅ ドロップイン ⚠️ 仕様未検証価格はお問い合わせください
データシートを見る →ISL8391IB-T 最大定格&電気的特性
| Product Type | Quad SPST analog switch |
| Number of Circuits | 4 circuits |
| Multiplexer Configuration | 1:1 |
| On-Resistance | 35 ohm |
| Single-Supply Operating Range | +2 V to +12 V |
| Dual-Supply Operating Range | +/-2 V to +/-6 V |
| Low Power Consumption | 1 uW |
| Maximum Leakage Current | 2.5 nA |
| Technology | CMOS |
| パッケージ | 16-pin SOIC |
| 実装タイプ | Surface mount |
| Terminal Count | 16 terminals |
| Switching Configuration | SPST |
ISL8391IB-T 16-pin soic ピン配置ガイド
ISL8391IB-T (16-pin soic パッケージ) のピン配置。 ピン番号、機能、接続図はメーカーのデータシートで定義されています。正確なフットプリントとはんだ付けのガイドラインについては、データシートを参照してください。
詳細なピン配置データはありません: ISL8391IB-T.
詳細は データシート をご参照ください。
主な用途
ISL8391IB-T の用途: 6 件s: Battery-Powered Measurement Equipment, Data Acquisition Signal Routing, Test and Measurement Systems, Industrial Control Interfaces, Portable Sensor Interfaces, Battery-Powered Communication Equipment.
Battery-Powered Measurement Equipment
The ISL8391IB-T fits battery-powered measurement equipment because it supports a +2 V to +12 V single-supply range, consumes approximately 1 uW in the cited low-power condition, and limits leakage to 2.5 nA. Its four SPST channels can route a selected sensor output to an amplifier or measurement converter while isolating inactive inputs. The 35 ohm on-resistance should be included in the source-impedance calculation, particularly when measuring high-value sensors whose output impedance is comparable to the switch resistance.
おすすめ
Data Acquisition Signal Routing
The ISL8391IB-T can route four low-frequency analog signals in a data-acquisition module. Each SPST channel provides a dedicated one-to-one path, allowing an instrument to connect a selected sensor, reference, or test input to downstream circuitry. Its 35 ohm on-resistance is practical for many medium-impedance sources, while the 2.5 nA maximum leakage helps reduce errors in high-impedance measurements. Confirm switch timing and permitted signal swing against the acquisition settling requirements.
おすすめ
Test and Measurement Systems
The ISL8391IB-T is useful in automated test equipment for connecting and disconnecting external nodes without placing a relay in every signal path. Four independently controlled SPST switches can isolate instruments, route excitation to a device under test, or select among test inputs. The low-power CMOS design supports compact portable testers, and the 16-pin SOIC package simplifies conventional surface-mount assembly. The system designer should still account for 35 ohm insertion resistance and control-pin timing.
おすすめ
Industrial Control Interfaces
The ISL8391IB-T can isolate and route sensor or control signals in industrial interface modules when the signal amplitudes remain within the device's specified voltage limits. Single-supply operation from +2 V to +12 V fits many embedded control systems, while dual operation from ±2 V to ±6 V supports bipolar signaling. The four SPST channels offer independent routing without the continuous power burden of multiple relay stages, although the 35 ohm path resistance must be checked against the interface impedance.
おすすめ
Portable Sensor Interfaces
The ISL8391IB-T is suitable for portable sensor interfaces that need to share a common analog front end. Its four SPST channels can connect one sensor at a time to an amplifier or converter, disconnect inactive sensors, and reduce loading through low leakage of up to 2.5 nA. Operation from +2 V to +12 V accommodates several battery-derived rails. When the sensor has very high output impedance, validate the 35 ohm switch resistance and the complete leakage budget during signal-chain design.
おすすめ
Battery-Powered Communication Equipment
The ISL8391IB-T can support signal routing in compact battery-powered communication equipment where a +2 V to +12 V single supply and low power consumption are important. Four independent switch channels can control audio, control, or low-frequency measurement paths without operating mechanical relays continuously. The CMOS architecture, approximately 1 uW low-power condition, and 2.5 nA maximum leakage support portable-system objectives. Use the manufacturer data for switch timing, charge injection, and maximum signal-level checks.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: ISL8391IB-T — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | ISL8394IB-T | ISL8392IB-T | ISL8393IB-T |
|---|---|---|---|---|
| Brand | Renesas Electronics | Renesas Electronics | Renesas Electronics | Renesas Electronics |
| Package | 16-pin SOIC | 16-pin SOIC | 16-pin SOIC | 16-pin SOIC |
主な差別化要因
- Defined low-voltage operating flexibility (vs ISL8394IB-T)
- Low leakage for sensitive analog routing (vs ISL8392IB-T)
- Compact four-channel integration (vs ISL8393IB-T)
設計ノート
Include the 35 ohm switch on-resistance in the complete signal-path impedance. This is especially important for high-impedance sensors because the switch resistance can interact with input capacitance and establish a low-pass pole. Keep analog traces short, use a common reference plane, and place downstream amplifiers close enough to minimize additional board-level capacitance and susceptibility to interference.
Route each switched node as a continuous analog trace where possible, avoiding long shared paths that could couple switching transients into sensitive channels. Keep control traces away from high-impedance input and output pins, use a solid ground plane, and terminate unused inputs and outputs according to the manufacturer datasheet. Verify the exact control and common-pin assignments before finalizing the PCB footprint.
Place the required bypass capacitor close to the supply and ground pins and follow the manufacturer layout guidance for the 16-pin SOIC package. Check startup behavior, control-pin sequencing, and rail limits for both +2 V to +12 V single-supply operation and ±2 V to ±6 V dual-supply operation. The quoted 1 uW power figure should not be treated as the total system consumption without considering control and leakage currents.
Do not substitute an ISL839x family member solely because it uses a 16-pin SOIC outline. Compare pin numbers, common terminals, control polarity, switch topology, recommended supply range, on-resistance, leakage, and signal-voltage limits. A drop-in decision also requires confirming that the assembled suffix matches the required temperature grade and shipment method.
コンプライアンス情報
The component is an industrial-style analog switch rather than an automotive-qualified device. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status require confirmation from current manufacturer or lot documentation.