LC4256C-5T100I - 256-Macrocell 227MHz CPLD | Lattice
N.º da peça: LC4256C-5T100I ✓ AtivoLC4256C-5T100I Visão geral
A complex programmable logic device, or CPLD, is a programmable-logic category that combines multiple programmable logic blocks with a deterministic interconnect structure. A CPLD sits between simple programmable logic arrays and larger FPGAs: it offers more integrated logic capacity and deterministic timing than basic PAL-type devices while generally using less routing flexibility and capacity than an FPGA. The LC4256C-5T100I is therefore positioned for control, interface, glue-logic, and signal-processing functions where repeatable timing and in-system programmability are important.
The device provides 256 macrocells and a nominal 227 MHz maximum operating frequency. Its 5 ns speed designation identifies the -5 performance grade, while the I suffix identifies the industrial-temperature option. The core supply is 1.8 V, with an internal operating range of 1.65 V to 1.95 V, and the device supports 1.8 V, 2.5 V, and 3.3 V in-system-programmable families. Up to four global clock pins with programmable clock polarity support multi-clock control logic and registered clock-domain designs.
Technically, the ispMACH architecture provides predictable propagation behavior without external memory for configuration. The 5 ns grade is appropriate for high-speed interface decoding, state-machine control, bus arbitration, and peripheral glue logic. Because CPLD timing is characterized by fixed architecture-level paths, engineers can use the device for latency-sensitive control paths where an FPGA soft core would add unnecessary complexity, configuration overhead, and resource cost.
Typical uses include industrial controller interfaces, communications equipment, instrumentation, embedded peripheral control, and general-purpose logic consolidation. The 100-pin TQFP provides 64 I/O according to the device-family information while leaving dedicated supply, configuration, clock, and ground resources. The industrial temperature range of -40°C to 105°C for junction temperature makes the part suitable for factory, telecommunications, and commercial equipment requiring extended environmental operation.
Designers should verify every pin assignment and power configuration against the manufacturer pin table before layout. The 1.8 V core and in-system-programming interface require correct pin assignment, decoupling, and programming-signal compatibility. This page also consolidates package details, verified alternatives, comparison parameters, application guidance, and practical design considerations into one engineering reference.
The LC4256C-5T100I is best considered when a design needs more deterministic logic than simple combinational devices, more simplicity than a large FPGA, and a 100-pin industrial package. For new designs, confirm device availability and qualification status with XAIPART before committing the footprint to production.
Alternativas drop-in para LC4256C-5T100I — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Variantes desta série
Modelos da mesma série compatíveis como drop-in com LC4256C-5T100I (mesmo formato e footprint) — diferindo em Device Type.
LC4256C-5TN100I
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
LC4256C-5T100
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
LC4256V-5T100I
✅ Drop-InConsulte o preço
Ver ficha técnica →LC4256C-6T100I
✅ Drop-In ⚠️ Especificações não verificadas📋 Alternativa de referência (fora do catálogo)
LC4256C-7T100I
✅ Drop-In ⚠️ Especificações não verificadas📋 Alternativa de referência (fora do catálogo)
LC4256C-5T100I Classificações máximas e características elétricas
| Device Type | Complex Programmable Logic Device (CPLD) |
| Device Family | ispMACH 4000C |
| Macrocell Count | 256 macrocells |
| Maximum Operating Frequency | 227 MHz |
| Speed Grade | 5 ns |
| Core Supply Voltage | 1.8 V |
| Internal Supply Range | 1.65 V to 1.95 V |
| Programmable Supply Families | 1.8 V, 2.5 V, and 3.3 V |
| User I/O Count | 64 I/O |
| Global Clock Pins | Up to 4 with programmable clock polarity |
| Encapsulamento | 100-pin TQFP |
| Package Dimensions | 14 x 14 mm |
| Tipo de montagem | Surface mount |
| Temperature Grade | Industrial |
| Junction Temperature Range | -40°C to 105°C |
| Shipping Format | Tray |
| Configuration Support | In-system programmable |
Guia de Configuração de Pinos do LC4256C-5T100I 14 x 14 mm
Configuração de pinos para LC4256C-5T100I (pacote 14 x 14 mm). Este CI digital inclui GPIO, interfaces de comunicação (UART, SPI, I2C) e pinos de alimentação. Consulte o datasheet do fabricante para funções alternativas dos pinos e opções de configuração. Essencial para projeto de sistemas embarcados e layout de PCB.
Nenhum dado detalhado de pinagem disponível para LC4256C-5T100I.
Consulte a ficha técnica para a configuração completa dos pinos.
Aplicações típicas
LC4256C-5T100I é adequado para 6 aplicaçãos: Industrial Control Logic, Telecommunications Interface Control, Instrumentation Signal Conditioning, Communication Protocol Bridging, Embedded Peripheral Consolidation, LED Display Control.
Industrial Control Logic
The LC4256C-5T100I fits industrial controllers that require deterministic logic for sequencing, latch handling, interlocks, and machine-state decoding. Its 256 macrocells provide substantially more implementation capacity than basic PAL devices, while the 227 MHz maximum frequency and 5 ns grade support faster control paths. The industrial junction-temperature range of -40°C to 105°C suits factory equipment with variable ambient conditions. Use the 64 available I/O for sensors, actuator outputs, and field-bus interface logic. Verify industrial system timing, isolation boundaries, and supply sequencing against the manufacturer constraints before production release.
Recomendado
Telecommunications Interface Control
In telecommunications equipment, the LC4256C-5T100I can implement framing logic, command decoding, clock-domain control, status multiplexing, and data-route arbitration. Its 5 ns speed class is useful for registered logic operating below the 227 MHz maximum frequency, while the deterministic CPLD architecture simplifies timing analysis. The 1.8 V core supports modern low-voltage equipment, and the industrial temperature option covers extended-temperature installations. Confirm interface voltage standards, clock topology, and in-system-programming access so the device can be updated without disrupting field operation.
Recomendado
Instrumentation Signal Conditioning
The LC4256C-5T100I is suitable for instrumentation logic that coordinates sensor selection, gain-control sequencing, trigger routing, and data-acquisition control. Its 256 macrocells can consolidate fixed control functions without using an FPGA, and the 227 MHz maximum operating frequency supports fast register and handshake logic. The 64 I/O provide direct connections to multiplexers, converters, and status indicators. Keep analog and digital return paths separated, and validate every timing-critical path against the 5 ns device characteristics before applying the part in precision measurement equipment.
Recomendado
Communication Protocol Bridging
The LC4256C-5T100I can bridge simple parallel protocols, perform protocol conversion, and implement FIFO, arbitration, and interrupt-control logic. Its 5 ns speed grade offers useful timing margin for registered interfaces operating well below the 227 MHz maximum frequency, and 64 I/O allow multiple buses or chip selects to be combined in one package. The CPLD architecture provides deterministic behavior suitable for interface-control functions. Verify input thresholds, output drive, clock-domain crossing, and programming-state behavior against the exact device electrical tables before implementation.
Recomendado
Embedded Peripheral Consolidation
The LC4256C-5T100I can consolidate decode, glue, and sequencing functions around microcontrollers or FPGAs without adding another broad programmable-logic device. A 256-macrocell array is useful for peripheral chip selects, DMA request control, watchdog supervision, interrupt arbitration, and programmable state machines. Its 227 MHz maximum frequency permits fast registered handshakes, while deterministic timing simplifies firmware support. Use its in-system-programming capability for configuration updates when the board design permits access to the programming pins, and ensure all unused outputs are assigned a defined state.
Recomendado
LED Display Control
The LC4256C-5T100I can drive timing and control logic for LED display controllers, including scan sequencing, row and column decoding, brightness-control multiplexing, and fault monitoring. The 64 I/O provide a practical interface to display drivers, while the 227 MHz maximum frequency and 5 ns grade support fast counter and shift-register logic. CPLD implementation also lets the display timing evolve without changing the processor firmware. Design the output paths for the required drive voltage, use appropriate current limiting at the LED matrix, and validate refresh timing and blanking intervals on the final panel.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para LC4256C-5T100I — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | LC4256C-5TN100I | LC4256C-5T100 | LC4256V-5T100I | LC4256C-6T100I | LC4256C-7T100I |
|---|---|---|---|---|---|---|
| Package | TQFP-100 (14 x 14 mm) | TQFP-100 (14 x 14 mm) | TQFP-100 (14 x 14 mm) | TQFP-100 (14 x 14 mm) | TQFP-100 (14 x 14 mm) | TQFP-100 (14 x 14 mm) |
| Brand | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor |
| Device Type | CPLD | CPLD | CPLD | CPLD | CPLD | CPLD |
| Speed Grade | 5 ns | 5 ns | 5 ns | 5 ns | 6 ns | 7 ns |
| Core Supply Voltage | 1.8 V | 1.8 V | 1.8 V | 1.8 V | 1.8 V | 1.8 V |
Principais diferenciais
- Higher timing class within the same package (vs LC4256C-6T100I)
- Industrial ordering option in a 100-pin TQFP (vs LC4256C-5T100)
- Exact 256-macrocell and 227 MHz class (vs LC4256C-5TN100I)
Notas de projeto
Assign the 100-pin TQFP footprint from the manufacturer package drawing and preserve access to the in-system-programming pins. Place the required core and I/O supply decoupling capacitors close to their associated pins, with short ground returns and a continuous ground plane. Verify pin orientation against pin 1 before ordering the PCB.
Use the 5 ns timing characteristics for all registered and combinational paths, including global clock distribution and I/O transitions. Confirm clock source, polarity, and routing with the design tool, and avoid relying on the 227 MHz maximum as a guaranteed system-clock rate when external loads, package effects, or I/O standards constrain operation.
Do not interchange the industrial suffix, speed suffix, or shipping code without checking the full ordering string. A pin-compatible alternative can still change temperature grade, shipping format, timing, or device-family behavior. Before substitution, compare power specifications, configuration pins, global-clock resources, and every constrained timing path in the completed design.
Keep the TQFP perimeter as free as practical from high-current switching nodes and noisy external clocks. Route sensitive configuration and clock signals away from ground-return discontinuities, use solid grounding beneath the device, and observe the manufacturer's fanout guidance. In-system-programming traces should be accessible or brought to test points for production recovery.
Informações de conformidade
The industrial temperature range is specified, but RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations were not established. AEC-Q100 is not applicable to this general-purpose CPLD classification.