LC4256C-5T100I - 256-Macrocell 227MHz CPLD | Lattice
MPN: LC4256C-5T100I ✓ Hoạt độngLC4256C-5T100I Tóm tắt
A complex programmable logic device, or CPLD, is a programmable-logic category that combines multiple programmable logic blocks with a deterministic interconnect structure. A CPLD sits between simple programmable logic arrays and larger FPGAs: it offers more integrated logic capacity and deterministic timing than basic PAL-type devices while generally using less routing flexibility and capacity than an FPGA. The LC4256C-5T100I is therefore positioned for control, interface, glue-logic, and signal-processing functions where repeatable timing and in-system programmability are important.
The device provides 256 macrocells and a nominal 227 MHz maximum operating frequency. Its 5 ns speed designation identifies the -5 performance grade, while the I suffix identifies the industrial-temperature option. The core supply is 1.8 V, with an internal operating range of 1.65 V to 1.95 V, and the device supports 1.8 V, 2.5 V, and 3.3 V in-system-programmable families. Up to four global clock pins with programmable clock polarity support multi-clock control logic and registered clock-domain designs.
Technically, the ispMACH architecture provides predictable propagation behavior without external memory for configuration. The 5 ns grade is appropriate for high-speed interface decoding, state-machine control, bus arbitration, and peripheral glue logic. Because CPLD timing is characterized by fixed architecture-level paths, engineers can use the device for latency-sensitive control paths where an FPGA soft core would add unnecessary complexity, configuration overhead, and resource cost.
Typical uses include industrial controller interfaces, communications equipment, instrumentation, embedded peripheral control, and general-purpose logic consolidation. The 100-pin TQFP provides 64 I/O according to the device-family information while leaving dedicated supply, configuration, clock, and ground resources. The industrial temperature range of -40°C to 105°C for junction temperature makes the part suitable for factory, telecommunications, and commercial equipment requiring extended environmental operation.
Designers should verify every pin assignment and power configuration against the manufacturer pin table before layout. The 1.8 V core and in-system-programming interface require correct pin assignment, decoupling, and programming-signal compatibility. This page also consolidates package details, verified alternatives, comparison parameters, application guidance, and practical design considerations into one engineering reference.
The LC4256C-5T100I is best considered when a design needs more deterministic logic than simple combinational devices, more simplicity than a large FPGA, and a 100-pin industrial package. For new designs, confirm device availability and qualification status with XAIPART before committing the footprint to production.
Bộ thay thế dễ dàng lắp đặt cho LC4256C-5T100I — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với LC4256C-5T100I (cùng hình factor và footprint) — khác nhau ở Device Type.
LC4256C-5TN100I
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
LC4256C-5T100
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
LC4256V-5T100I
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →LC4256C-6T100I
✅ Drop-In ⚠️ Thông số chưa được xác minh📋 Tham chiếu thay thế (không có trong danh mục)
LC4256C-7T100I
✅ Drop-In ⚠️ Thông số chưa được xác minh📋 Tham chiếu thay thế (không có trong danh mục)
LC4256C-5T100I Tỷ lệ tối đa & tính chất điện
| Device Type | Complex Programmable Logic Device (CPLD) |
| Device Family | ispMACH 4000C |
| Macrocell Count | 256 macrocells |
| Maximum Operating Frequency | 227 MHz |
| Speed Grade | 5 ns |
| Core Supply Voltage | 1.8 V |
| Internal Supply Range | 1.65 V to 1.95 V |
| Programmable Supply Families | 1.8 V, 2.5 V, and 3.3 V |
| User I/O Count | 64 I/O |
| Global Clock Pins | Up to 4 with programmable clock polarity |
| Hộp | 100-pin TQFP |
| Package Dimensions | 14 x 14 mm |
| Kiểu lắp đặt | Surface mount |
| Temperature Grade | Industrial |
| Junction Temperature Range | -40°C to 105°C |
| Shipping Format | Tray |
| Configuration Support | In-system programmable |
Hướng dẫn cấu hình chân LC4256C-5T100I 14 x 14 mm
Cấu hình chân cho LC4256C-5T100I (14 x 14 mm gói). IC số này bao gồm chân GPIO, giao diện truyền thông (UART, SPI, I2C) và chân nguồn. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết các chức năng chân thay thế và tùy chọn cấu hình. Cực kỳ quan trọng cho thiết kế hệ thống tích hợp và lập trình PCB.
Không có dữ liệu chân cụ thể sẵn có cho LC4256C-5T100I.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
LC4256C-5T100I phù hợp cho 6 Áp dụngs: Industrial Control Logic, Telecommunications Interface Control, Instrumentation Signal Conditioning, Communication Protocol Bridging, Embedded Peripheral Consolidation, LED Display Control.
Industrial Control Logic
The LC4256C-5T100I fits industrial controllers that require deterministic logic for sequencing, latch handling, interlocks, and machine-state decoding. Its 256 macrocells provide substantially more implementation capacity than basic PAL devices, while the 227 MHz maximum frequency and 5 ns grade support faster control paths. The industrial junction-temperature range of -40°C to 105°C suits factory equipment with variable ambient conditions. Use the 64 available I/O for sensors, actuator outputs, and field-bus interface logic. Verify industrial system timing, isolation boundaries, and supply sequencing against the manufacturer constraints before production release.
Được đề xuất
Telecommunications Interface Control
In telecommunications equipment, the LC4256C-5T100I can implement framing logic, command decoding, clock-domain control, status multiplexing, and data-route arbitration. Its 5 ns speed class is useful for registered logic operating below the 227 MHz maximum frequency, while the deterministic CPLD architecture simplifies timing analysis. The 1.8 V core supports modern low-voltage equipment, and the industrial temperature option covers extended-temperature installations. Confirm interface voltage standards, clock topology, and in-system-programming access so the device can be updated without disrupting field operation.
Được đề xuất
Instrumentation Signal Conditioning
The LC4256C-5T100I is suitable for instrumentation logic that coordinates sensor selection, gain-control sequencing, trigger routing, and data-acquisition control. Its 256 macrocells can consolidate fixed control functions without using an FPGA, and the 227 MHz maximum operating frequency supports fast register and handshake logic. The 64 I/O provide direct connections to multiplexers, converters, and status indicators. Keep analog and digital return paths separated, and validate every timing-critical path against the 5 ns device characteristics before applying the part in precision measurement equipment.
Được đề xuất
Communication Protocol Bridging
The LC4256C-5T100I can bridge simple parallel protocols, perform protocol conversion, and implement FIFO, arbitration, and interrupt-control logic. Its 5 ns speed grade offers useful timing margin for registered interfaces operating well below the 227 MHz maximum frequency, and 64 I/O allow multiple buses or chip selects to be combined in one package. The CPLD architecture provides deterministic behavior suitable for interface-control functions. Verify input thresholds, output drive, clock-domain crossing, and programming-state behavior against the exact device electrical tables before implementation.
Được đề xuất
Embedded Peripheral Consolidation
The LC4256C-5T100I can consolidate decode, glue, and sequencing functions around microcontrollers or FPGAs without adding another broad programmable-logic device. A 256-macrocell array is useful for peripheral chip selects, DMA request control, watchdog supervision, interrupt arbitration, and programmable state machines. Its 227 MHz maximum frequency permits fast registered handshakes, while deterministic timing simplifies firmware support. Use its in-system-programming capability for configuration updates when the board design permits access to the programming pins, and ensure all unused outputs are assigned a defined state.
Được đề xuất
LED Display Control
The LC4256C-5T100I can drive timing and control logic for LED display controllers, including scan sequencing, row and column decoding, brightness-control multiplexing, and fault monitoring. The 64 I/O provide a practical interface to display drivers, while the 227 MHz maximum frequency and 5 ns grade support fast counter and shift-register logic. CPLD implementation also lets the display timing evolve without changing the processor firmware. Design the output paths for the required drive voltage, use appropriate current limiting at the LED matrix, and validate refresh timing and blanking intervals on the final panel.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho LC4256C-5T100I — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | LC4256C-5TN100I | LC4256C-5T100 | LC4256V-5T100I | LC4256C-6T100I | LC4256C-7T100I |
|---|---|---|---|---|---|---|
| Package | TQFP-100 (14 x 14 mm) | TQFP-100 (14 x 14 mm) | TQFP-100 (14 x 14 mm) | TQFP-100 (14 x 14 mm) | TQFP-100 (14 x 14 mm) | TQFP-100 (14 x 14 mm) |
| Brand | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor |
| Device Type | CPLD | CPLD | CPLD | CPLD | CPLD | CPLD |
| Speed Grade | 5 ns | 5 ns | 5 ns | 5 ns | 6 ns | 7 ns |
| Core Supply Voltage | 1.8 V | 1.8 V | 1.8 V | 1.8 V | 1.8 V | 1.8 V |
Bảo phân biệt quan trọng
- Higher timing class within the same package (vsLC4256C-6T100I)
- Industrial ordering option in a 100-pin TQFP (vsLC4256C-5T100)
- Exact 256-macrocell and 227 MHz class (vsLC4256C-5TN100I)
Ghi chú thiết kế
Assign the 100-pin TQFP footprint from the manufacturer package drawing and preserve access to the in-system-programming pins. Place the required core and I/O supply decoupling capacitors close to their associated pins, with short ground returns and a continuous ground plane. Verify pin orientation against pin 1 before ordering the PCB.
Use the 5 ns timing characteristics for all registered and combinational paths, including global clock distribution and I/O transitions. Confirm clock source, polarity, and routing with the design tool, and avoid relying on the 227 MHz maximum as a guaranteed system-clock rate when external loads, package effects, or I/O standards constrain operation.
Do not interchange the industrial suffix, speed suffix, or shipping code without checking the full ordering string. A pin-compatible alternative can still change temperature grade, shipping format, timing, or device-family behavior. Before substitution, compare power specifications, configuration pins, global-clock resources, and every constrained timing path in the completed design.
Keep the TQFP perimeter as free as practical from high-current switching nodes and noisy external clocks. Route sensitive configuration and clock signals away from ground-return discontinuities, use solid grounding beneath the device, and observe the manufacturer's fanout guidance. In-system-programming traces should be accessible or brought to test points for production recovery.
Thông tin tuân thủ
The industrial temperature range is specified, but RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations were not established. AEC-Q100 is not applicable to this general-purpose CPLD classification.