Texas Instruments

LM2902MTX - Quad 1MHz Op Amp | Texas Instruments

N.º da peça: LM2902MTX ✓ Ativo
Single or split supply Vdss 14-pin TSSOP Package
MOQ: 1 |

LM2902MTX Visão geral

The Texas Instruments LM2902MTX is a four-circuit general-purpose operational amplifier with a 1 MHz gain-bandwidth product, supplied in a 14-pin TSSOP package. It combines four independent amplifiers in one package, supports operation from single or split power supplies, and is specified for an operating temperature range of -40°C to +85°C. Its frequency-compensated design is intended for industrial control, instrumentation, sensor conditioning, and general analog signal-processing systems.

An operational amplifier is an analog integrated circuit that amplifies the voltage difference between its inverting and non-inverting inputs. The LM2902MTX belongs to the broader hierarchy of operational amplifier, analog amplifier, analog IC, and semiconductor. Unlike rail-to-rail precision amplifiers, this general-purpose family is intended for conventional supply rails and moderate signal bandwidth, making it suitable for cost-sensitive designs where 1 MHz bandwidth is sufficient.

Each of the four amplifier sections provides high open-loop gain and internally compensated operation. A typical non-inverting gain stage uses the amplifier with feedback from its output to the inverting input, while an inverting stage returns the input signal through a feedback network. The shared 14-pin TSSOP package reduces board area compared with four separate single-amplifier packages, and the four independent channels can implement simultaneous sensing, buffering, filtering, or control functions.

The LM2902 family is designed for single-supply or split-supply operation, allowing it to interface with sensors referenced to ground or signals centered between positive and negative rails. Its 1 MHz gain-bandwidth product is adequate for low-frequency control loops, transducer conditioning, and general industrial signal paths, but it is not optimized for high-speed data acquisition or precision applications requiring very low offset voltage, low input bias current, rail-to-rail output swing, or microvolt-level noise.

Typical uses include process-control loops, pressure and temperature sensor interfaces, low-frequency active filters, industrial data acquisition, audio and communication support circuitry, and general buffer stages. Using four independent amplifiers in one package can simplify signal routing and reduce component count when a board needs several similar analog channels.

Designers should verify the input common-mode range, output swing, input bias current, offset voltage, supply current, and stability requirements against the manufacturer datasheet for the exact operating voltage. Input and output networks should be checked for bias-current compensation, and unused amplifier sections should be configured according to the recommended stable-input arrangement rather than left floating.

This product page combines the manufacturer-device identity, package and pin information, operating limits, application guidance, and same-package replacement analysis. It also identifies which electrical characteristics require confirmation from the manufacturer datasheet, helping engineers separate confirmed LM2902MTX attributes from parameters that vary by qualification, temperature grade, or ordering suffix.

Alternativas drop-in para LM2902MTX — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.

Variantes desta série

Modelos da mesma série compatíveis como drop-in com LM2902MTX (mesmo formato e footprint) — diferindo em Gain-Bandwidth Product, Product Type, Maximum Supply Voltage, Package, Package Type.

Texas Instruments
Product Type: Quad general-purpose operational amplifier
Maximum Supply Voltage: 26 V
Package: 14-TSSOP (PW)
Texas Instruments
Gain-Bandwidth Product: 1.2 MHz
Maximum Supply Voltage: 36 V
Package Type: 14-TSSOP
Comparar com LM2902MTX →

LM2902MTX/NOPB

✅ Drop-In
Texas Instruments
📦 14-pin TSSOP (PW)
Quad general-purpose operational amplifier · 4 circuits · 4 independent operational amplifiers · 26 V · Single supply · 1 MHz · Internally frequency compensated · General purpose

Consulte o preço

Ver ficha técnica →

LM2902PT

✅ Drop-In ⚠️ Especificações não verificadas
📦 14-pin TSSOP (PW)
Same LM2902 quad-amplifier family and 14-pin TSSOP arrangement; ordering suffix differs by 0 V rated supply in the listed 26 V family specification and by 0 MHz in the stated 1 MHz bandwidth.

📋 Alternativa de referência (fora do catálogo)

LM2902KPWR

✅ Drop-In ⚠️ Especificações não verificadas
Texas Instruments
📦 14-pin TSSOP (PW)
4 amplifiers · General-purpose operational amplifier · 26 V · 1.2 MHz · 2 kV · -40 °C to +125 °C · Single-supply operation · Internally frequency compensated

Consulte o preço

Ver ficha técnica →

LM2902PWR

✅ Drop-In ⚠️ Especificações não verificadas
Texas Instruments
📦 14-pin TSSOP (PW)
4 circuits · General-purpose operational amplifier · 26 V · 36 V · 3 V to 36 V for B and BA versions · 1.2 MHz · 2 mV maximum at 25°C for BA versions, LM2902A, and LM124A · Extends to ground

Consulte o preço

Ver ficha técnica →

LM2902MTX/NOPB

✅ Drop-In ⚠️ Especificações não verificadas
Texas Instruments
📦 14-pin TSSOP (PW)
Quad general-purpose operational amplifier · 4 circuits · 4 independent operational amplifiers · 26 V · Single supply · 1 MHz · Internally frequency compensated · General purpose

Consulte o preço

Ver ficha técnica →

LM2902MTX Classificações máximas e características elétricas

Amplifier Count 4 circuits
Product Type General-purpose operational amplifier
Gain-Bandwidth Product 1 MHz
Encapsulamento 14-pin TSSOP
Package Type TSSOP (PW)
Faixa de temperatura de operação -40°C to +85°C
Número de pinos 14 pins
Tipo de montagem Surface mount
Supply Configuration Single or split supply

Configuração de pinos do LM2902MTX

TSSOP-14 (4.4mm) Package Pinout Diagram TSSOP-14 4.4x5mm, P0.65mm, JEDEC MO-153. 14-pin thin shrink. 1 14 2 13 3 12 4 11 5 10 6 9 7 8 TSSOP-14 (4.4mm)
Pino 1 OUT1 — Output of amplifier 1
Pino 2 -IN1 — Inverting input of amplifier 1
Pino 3 +IN1 — Non-inverting input of amplifier 1
Pino 4 V+ — Positive power supply
Pino 5 +IN2 — Non-inverting input of amplifier 2
Pino 6 -IN2 — Inverting input of amplifier 2
Pino 7 OUT2 — Output of amplifier 2
Pino 8 OUT3 — Output of amplifier 3
Pino 9 -IN3 — Inverting input of amplifier 3
Pino 10 +IN3 — Non-inverting input of amplifier 3
Pino 11 V- — Negative power supply
Pino 12 +IN4 — Non-inverting input of amplifier 4
Pino 13 -IN4 — Inverting input of amplifier 4
Pino 14 OUT4 — Output of amplifier 4

Aplicações típicas

LM2902MTX é adequado para 6 aplicaçãos: Industrial Process-Control Loops, Temperature and Pressure Sensor Conditioning, Low-Frequency Active Filters, Instrumentation and Data Acquisition, Communication Interface Buffering, Power-Supply Feedback and Monitoring.

🏭

Industrial Process-Control Loops

The LM2902MTX fits low-frequency industrial process-control loops because it combines four independent amplifier channels with a 1 MHz gain-bandwidth product in one 14-pin TSSOP. The amplifier can drive error-amplifier, comparator, actuator-conditioning, and signal-return stages around a controller. Its -40°C to +85°C rating is appropriate for industrial equipment, while the compact package reduces board area compared with four separate packages. The principal design checks are output swing, input common-mode range, load stability, and supply headroom.

🌡️

Temperature and Pressure Sensor Conditioning

The LM2902MTX can condition resistive temperature and pressure sensors in industrial monitoring equipment. Its four amplifier sections permit differential sensing, reference buffering, active filtering, and output amplification without requiring four packages. The 1 MHz bandwidth provides useful margin for slow sensor signals and compensation networks, while the -40°C to +85°C range supports typical factory environments. Bias-current effects, sensor excitation current, common-mode voltage, and output range must be calculated for the bridge or transmitter used.

🎧

Low-Frequency Active Filters

The LM2902MTX is appropriate for low-frequency active-filter stages that use the Sallen-Key or multiple-feedback topologies. A 1 MHz gain-bandwidth product comfortably supports bandwidths commonly used in audio, measurement, and industrial control when the required closed-loop gain is moderate. Four amplifiers can implement two complete second-order sections or provide buffering and gain stages. Component tolerances and op-amp gain-bandwidth behavior determine actual filter response, so simulation and stability testing should precede high-volume production.

🖥️

Instrumentation and Data Acquisition

The LM2902MTX can serve as a front-end amplifier, buffer, or gain stage in low-speed instrumentation and data-acquisition systems. Its four channels allow simultaneous handling of multiple sensor inputs while maintaining a consistent amplifier family and footprint. The 1 MHz bandwidth accommodates many industrial signals, but the design must remain within the input common-mode range and output swing of the selected supply. Input bias-current compensation, source impedance, settling requirements, and channel-to-channel behavior should be verified against the application bandwidth.

🌐

Communication Interface Buffering

The LM2902MTX can buffer slow communication, logic-interface, and level-conversion signals when the signal bandwidth is well below its 1 MHz gain-bandwidth product. Four independent channels are useful for isolating a controller from sensors, amplifiers, or line-driver stages while preserving a common package and pin arrangement. The amplifier is not intended for high-speed digital lines, so rise-time, capacitive-load, output-swing, and supply-voltage checks are essential. Choose an external line driver when current or impedance requirements exceed the amplifier's capabilities.

⚡

Power-Supply Feedback and Monitoring

The LM2902MTX can implement supply-feedback amplifiers, comparators, and monitoring channels in industrial power systems. Its four-channel arrangement allows separate functions such as output-voltage feedback, current monitoring, fault detection, and buffered reference generation. The approximately 1 MHz bandwidth is more than adequate for many control-loop and supervisory functions, while the -40°C to +85°C operating range supports regulated industrial equipment. The power stage, protection network, and operating-point limits must be designed around the actual supply and current requirements.

What is the LM2902MTX?
The LM2902MTX is a Texas Instruments quad operational amplifier containing four independent, frequency-compensated amplifier sections in a 14-pin TSSOP package. According to the Texas Instruments manufacturer datasheet for the LM2902 family, the device has a 1 MHz gain-bandwidth product and a -40°C to +85°C operating-temperature range. It can operate from a single supply or split supplies, making it suitable for industrial control, instrumentation, sensor-conditioning, buffering, and low-frequency active-filter circuits.
How many amplifiers are in the LM2902MTX?
The LM2902MTX contains four independent operational amplifiers. The DigiKey product listing identifies it as a four-circuit device in a 14-TSSOP package, while the Mouser listing describes the same family as a low-power quad operational amplifier. Each section can perform amplification, buffering, comparison, or filtering, and the common package simplifies multi-channel analog board layouts by replacing four separate single-amplifier packages.
What is the gain-bandwidth product of LM2902MTX?
The LM2902MTX has a 1 MHz gain-bandwidth product. The Mouser manufacturer listing states this value for the LM2902MTX, and the Texas Instruments family documentation describes internally compensated general-purpose operation. A 1 MHz gain-bandwidth product is suitable for low-frequency industrial control and sensor-conditioning paths, but closed-loop bandwidth will also depend on the selected noise gain, load, output-capacitance limits, and power-supply conditions.
What is the LM2902MTX package and pinout?
The LM2902MTX is packaged in a 14-pin TSSOP and follows the standard LM2902 quad-op-amp pin arrangement. Pins 1 through 7 are OUT1, -IN1, +IN1, V+, +IN2, -IN2, and OUT2; pins 8 through 14 are OUT3, -IN3, +IN3, V-, +IN4, -IN4, and OUT4. Use the manufacturer pin-description table when assigning PCB tracks and confirm the exposed-pad and soldering requirements for the exact PW-package variant.
Where can I download the LM2902MTX datasheet PDF?
The LM2902MTX datasheet is accessed through the Texas Instruments product page and the linked LM2902-N documentation. The manufacturer product page identifies LM2902MTX/NOPB as a quad, 26 V, 1 MHz operational amplifier in the 14-pin TSSOP PW package. Review the device-specific electrical tables before release because operating-temperature grade, lead-free finish, and ordering suffix can affect the exact ordering code without changing the basic 14-pin package outline.
Can LM2902MTX operate from a single supply?
Yes, the LM2902MTX can operate from a single positive supply or from split positive and negative supplies. The Texas Instruments LM2902 family is designed for both configurations, making it useful in grounded sensors and industrial process-control systems as well as bipolar signal-chain designs. The usable input and output swing does not extend automatically to the supply rails, so check the manufacturer common-mode range and output-swing curves for the selected supply voltage.
Where can I buy LM2902MTX online?
Use the Request a Quote form on this page to request LM2902MTX availability, current commercial terms, and a quotation for the quantity you need. The form is the appropriate route for stock confirmation, minimum-order quantity, lead time, and scheduling without relying on a static price that may change. The requested MPN should remain LM2902MTX, or LM2902MTX/NOPB when the lead-free finish is specifically required by the procurement specification.
What is the price of LM2902MTX?
Current pricing for LM2902MTX should be requested through the Request a Quote form on this page. The form supports quantity-specific commercial review and avoids presenting a stale unit price or an incorrect quantity break. When submitting the request, identify the required package as 14-pin TSSOP and confirm whether LM2902MTX or the explicitly designated LM2902MTX/NOPB ordering code is acceptable to your assembly process.
What is the lead time for LM2902MTX?
The current LM2902MTX lead time should be confirmed through the Request a Quote form on this page. Lead time can depend on order quantity, approved-part status, date code, and incoming factory schedule, so a representative single-unit listing does not establish a production delivery commitment. Provide your forecast quantities and required shipment date with the quotation request for a useful scheduling response.
Is LM2902MTX in stock?
Stock status for LM2902MTX should be checked through the Request a Quote form on this page. The page's commercial workflow can return the current availability position and an orderable quotation for the requested quantity, which is more useful for production planning than a general search-result notice. Include the exact suffix, including LM2902MTX/NOPB where relevant, when checking stock to avoid a mismatch with the approved BOM entry.
What is the best drop-in replacement for LM2902MTX?
LM2902MTX/NOPB is a directly matched same-family replacement when the original LM2902MTX suffix and the lead-free finish are interchangeable in the approved BOM. Other same-package LM2902 variants can differ in temperature grade, qualification, reel format, or orderable suffix, so engineers should compare those attributes before changing the MPN. The manufacturer cross-reference search is the recommended tool for validating a production substitution and its documented operating limits.
Can LM2902PT replace LM2902MTX?
The LM2902PT can be considered a same-package LM2902-family substitution only after its orderable attributes and electrical limits are checked against the approved design. The two devices use the 14-pin TSSOP family arrangement, but suffix differences can identify different packaging, temperature, qualification, or finish choices. Confirm pin configuration, supply range, common-mode range, output swing, and procurement requirements in the manufacturer datasheet before substituting LM2902PT for LM2902MTX.
When should I choose LM2902MTX over another quad op amp?
Choose LM2902MTX when a design needs four general-purpose amplifier channels, approximately 1 MHz gain-bandwidth product, single- or split-supply operation, and a compact 14-pin TSSOP implementation. It is a stronger fit than a micropower amplifier when more bandwidth is needed, and a simpler fit than a precision rail-to-rail device when low offset, low bias current, and full-swing operation are not essential. Confirm stability, noise, and output-drive requirements before final selection.
Is LM2902MTX suitable for industrial sensor conditioning?
The LM2902MTX is suitable for many industrial sensor-conditioning applications operating within its -40°C to +85°C range and approximately 1 MHz bandwidth. It can buffer resistive sensors, amplify low-frequency transducer signals, and form active filters or control-loop amplifiers with external resistors and capacitors. Input bias-current error, common-mode limits, sensor grounding, and output-swing margin must be evaluated for the specific transducer and supply voltage.
What are the key specifications of LM2902MTX that engineers should know?
The principal LM2902MTX attributes are four amplifier circuits, a 1 MHz gain-bandwidth product, a 14-pin TSSOP package, and a -40°C to +85°C specified operating range. According to Texas Instruments and distributor product descriptions, it is a general-purpose, internally compensated family member intended for single- or split-supply operation. Supply range, offset, bias current, common-mode range, output swing, noise, slew rate, and quiescent current should be read from the manufacturer electrical-characteristics table for the exact ordering suffix.
What is the difference between LM2902MTX and LM2902MTX/NOPB?
The primary documented difference is the ordering finish: LM2902MTX/NOPB identifies the no-lead or lead-free finish option, while LM2902MTX is the base ordering code. Both denote the same Texas Instruments LM2902-N family configuration in a 14-pin TSSOP PW package with four amplifiers, 1 MHz bandwidth, and a maximum specified operating temperature of +85°C. Verify the exact suffix on the manufacturer product page and ensure the approved BOM explicitly distinguishes the finish when necessary.
How does LM2902MTX compare with LM2902DR?
The LM2902MTX and LM2902DR are both members of the Texas Instruments LM2902 family, but their package formats differ: LM2902MTX is identified as 14-pin TSSOP, while LM2902DR is associated with the SOIC-14 option. They therefore are not same-footprint drop-in alternatives. A board designed for TSSOP must not accept LM2902DR without changing land patterns and solder processes, although the amplifier functions and core family characteristics are closely related.

Dados de referência de engenharia para LM2902MTX — comparação, orientação de projeto e informações de conformidade.

Guia de seleção

Choose LM2902MTX when the design needs four general-purpose amplifier channels, about 1 MHz gain-bandwidth product, and a compact 14-pin TSSOP implementation for industrial or instrumentation work. Prefer LM2902MTX/NOPB when the assembly process requires the explicitly identified lead-free ordering finish. LM2902PT, LM2902KPWR, LM2902PWR, and LM2902MT are same-package family candidates whose orderable attributes must be checked before substitution. Do not select LM2902DR as a footprint-compatible replacement because its SOIC-14 format differs from the TSSOP land pattern. Select a precision or rail-to-rail quad amplifier instead if the application requires very low offset, low bias current, full-swing output, or substantially lower-voltage operation.

Comparação com alternativas

Parâmetro Este produto LM2902MTX/NOPB LM2902PT LM2902KPWR LM2902PWR LM2902MT
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments
Package 14-pin TSSOP (PW) 14-pin TSSOP (PW) - same footprint 14-pin TSSOP (PW) - same footprint 14-pin TSSOP (PW) - same footprint 14-pin TSSOP (PW) - same footprint 14-pin TSSOP (PW) - same footprint
Amplifier Count 4 circuits 4 circuits 4 circuits 4 circuits 4 circuits 4 circuits
Gain-Bandwidth Product 1 MHz 1 MHz 1 MHz 1 MHz 1 MHz 1 MHz
Number of Pins 14 pins 14 pins 14 pins 14 pins 14 pins 14 pins
Product Category General-purpose operational amplifier General-purpose operational amplifier General-purpose operational amplifier General-purpose operational amplifier General-purpose operational amplifier General-purpose operational amplifier
Ordering Attribute Tape-and-reel MTX suffix Lead-free NOPB finish PT ordering suffix KPW tape-and-reel ordering suffix PW tape-and-reel ordering suffix MT ordering suffix

Principais diferenciais

  • Four amplifier channels in one compact package (vs LM324ANSR)
  • Same-footprint lead-free ordering option (vs LM2902MTX/NOPB)
  • Industrial temperature range (vs LM2902MTX/NOPB)
  • Single- and split-supply flexibility (vs LM2902PT)

Notas de projeto

Do not treat the 14-pin TSSOP pin arrangement as interchangeable with the LM2902DR SOIC-14 option. The LM2902MTX uses the TSSOP PW land pattern, so a SOIC-14 substitute requires a different footprint and solder process. Also avoid leaving an unused amplifier input floating; connect each unused section according to the manufacturer-recommended configuration so bias currents and input-stage behavior remain predictable.

Keep feedback-resistor and compensation networks close to the associated amplifier pins to reduce parasitic capacitance and feedback-loop delay. Source resistance and input-bias current can create DC input offset, so check whether the sensor source needs a bias-current compensation resistor. For capacitive loading, verify the stability limits in the manufacturer characteristics before adding long cable runs or large output-capacitance values.

Design the supply rails around input common-mode range and output-swing requirements rather than assuming the amplifier can drive its output to either rail. Place local supply-bypass capacitors near pins 4 and 11, use short return paths, and keep analog ground routing consistent with the circuit topology. Under single-supply operation, confirm that the signal and sensor references remain inside the usable input range across temperature and load.

Use the manufacturer PW-package land pattern and observe the standard TSSOP lead pitch, body width, solder-mask, and paste recommendations. Although the X suffix indicates a tape-and-reel ordering configuration, it does not change the electrical pinout. Validate the assembly stencil and reflow profile for the selected lead-free process, and inspect exposed-pad requirements if the manufacturer documentation identifies a thermal pad for the exact package revision.

Informações de conformidade

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Sem chumbo
Unknown
Sem halogênios
Unknown
Minerais de conflito
Unknown

LM2902MTX/NOPB explicitly identifies a no-lead ordering option, but no separate halide-free declaration, REACH declaration, conflict-minerals statement, or AEC-Q100 qualification was established for the exact ordering code. The base LM2902MTX suffix should therefore not be assumed compliant with a specific lead-free procurement requirement without manufacturer confirmation.

Dados verificados em: 2026-11-17 — dados verificados e curados pela equipe de engenharia de componentes da XAIPART

Buscas relacionadas

LM2902MTX datasheet LM2902MTX pinout LM2902MTX datasheet pdf LM2902MTX equivalent LM2902MTX replacement LM2902MTX TSSOP-14 pinout LM2902MTX vs LM2902MTX/NOPB LM2902MTX vs LM2902PT Texas Instruments LM2902MTX LM2902MTX price LM2902MTX stock LM2902MTX quad op amp application

Componentes & termos relacionados

Texas Instruments LM2902MTX LM2902MTX/NOPB LM2902PT LM2902KPWR LM2902PWR LM2902MT LM324ANSR operational amplifier quad operational amplifier general-purpose amplifier analog integrated circuit analog IC semiconductor frequency-compensated amplifier gain-bandwidth product 1 MHz 14-pin TSSOP TSSOP PW package surface-mount package single-supply operation split-supply operation input common-mode range input offset voltage input bias current industrial sensor conditioning active filter process-control loop
RFQ de cotação rápida
Preencha todos os detalhes — nossa equipe de vendas responderá em até 24 horas
Part number Fabricante Encapsulamento QTY Preço-alvo Total
✓
Cotação enviada!

Responderemos seu e-mail em até 24 horas

1
RFQ enviada
2
Cotação recebida
3
Pedido realizado
4
Pagamento
5
Enviado
6
Entregue
Ver detalhes da RFQ