STMicroelectronics

LM2904WHDT - Dual Low-Power Op Amp, 8-SOIC | STMicroelectronics

N.º da peça: LM2904WHDT ✓ Ativo
Single supply Vdss 8-SOIC Package Internal Speed
MOQ: 1 |

LM2904WHDT Visão geral

STMicroelectronics LM2904WHDT is a dual, low-power general-purpose operational amplifier packaged in an 8-pin SOIC. It provides 2 independent, internally frequency-compensated amplifier channels with single-ended outputs, making it suitable for signal-conditioning, buffering, and feedback-control circuits. The device is specified for automotive and industrial control systems and is supplied in the tape-and-reel LM2904WHDT configuration.

An operational amplifier is a voltage-feedback amplifier that uses high open-loop gain to amplify the difference between its inverting and non-inverting inputs. The LM2904 belongs to the operational-amplifier hierarchy, which sits within analog and mixed-signal semiconductors. Its dual-channel configuration reduces component count and board area when two amplifier functions are required on the same PCB.

Key features include 2 amplifier channels in one package, internal frequency compensation, and low-power operation from a single supply. The internal compensation removes the need for an external dominant-pole capacitor in conventional closed-loop applications. Single-ended outputs also simplify connection to analog-to-digital converters, sensors, transducers, and controller inputs that require a grounded-reference signal.

The architecture is suited to low-frequency precision-control applications because each channel has independent signal inputs. Designers can configure each amplifier as a voltage follower, non-inverting amplifier, or inverting amplifier. Unity-gain stability is especially useful for direct sensing and impedance-buffering positions where adding feedback components would be undesirable.

Typical uses include automotive sensor interfaces, industrial transducers, motor-control feedback networks, audio preamplifier stages, and low-frequency active filters. The STMicroelectronics product description identifies automotive and industrial control systems as primary application areas, while the low-power architecture benefits portable or distributed equipment operating from a single supply.

When assigning PCB tracks, use the manufacturer pin-description table and preserve the standard SOIC-8 pin sequence. Place each bypass capacitor close to the supply pins, route the inverting feedback path away from high-current switching nodes, and confirm output swing, input common-mode range, stability, and output-current requirements against the application before production release.

This page combines device identification, package and pin information, drop-in replacement analysis, application-focused guidance, and practical PCB design notes to support component selection, schematic review, sourcing, and second-source qualification.

Alternativas drop-in para LM2904WHDT — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.

Variantes desta série

Modelos da mesma série compatíveis como drop-in com LM2904WHDT (mesmo formato e footprint) — diferindo em Package.

Texas Instruments
Package: 8-SOIC (D)
Comparar com LM2904WHDT →

LM2904WDT

✅ Drop-In
📦 8-SOIC
Same dual-amplifier architecture and 8-SOIC footprint; identified electrical differences are 0% in the matched family-level parameters.

📋 Alternativa de referência (fora do catálogo)

LM2904DR

✅ Drop-In
Texas Instruments
📦 8-SOIC
2 · 3 V to 26 V · ±1.5 V to ±13 V · 700 kHz · 0.3 V/us · 2 mV (typical) · 500 uA (typical) · 0.7 mA (typical)

Consulte o preço

Ver ficha técnica →

LM2904DR

✅ Drop-In
Texas Instruments
📦 8-SOIC
2 · 3 V to 26 V · ±1.5 V to ±13 V · 700 kHz · 0.3 V/us · 2 mV (typical) · 500 uA (typical) · 0.7 mA (typical)

Consulte o preço

Ver ficha técnica →

LM2904DR

✅ Drop-In
Texas Instruments
📦 8-SOIC
2 · 3 V to 26 V · ±1.5 V to ±13 V · 700 kHz · 0.3 V/us · 2 mV (typical) · 500 uA (typical) · 0.7 mA (typical)

Consulte o preço

Ver ficha técnica →

LM2904DR

✅ Drop-In
Texas Instruments
📦 8-SOIC
2 · 3 V to 26 V · ±1.5 V to ±13 V · 700 kHz · 0.3 V/us · 2 mV (typical) · 500 uA (typical) · 0.7 mA (typical)

Consulte o preço

Ver ficha técnica →

LM2904DR

✅ Drop-In
Texas Instruments
📦 8-SOIC
2 · 3 V to 26 V · ±1.5 V to ±13 V · 700 kHz · 0.3 V/us · 2 mV (typical) · 500 uA (typical) · 0.7 mA (typical)

Consulte o preço

Ver ficha técnica →

LM2904WHDT Classificações máximas e características elétricas

Amplifier Count 2 channels
Product Type Dual general-purpose operational amplifier
Tipo de saída Single-ended
Number of Amplifiers 2
Supply Type Single supply
Frequency Compensation Internal
Architecture Two independent voltage-feedback amplifiers
Encapsulamento 8-SOIC
Contagem de pinos 8 pins
Tipo de montagem Surface mount
Supplier Packaging Tape and reel

Configuração de pinos do LM2904WHDT

SOIC-8 Package Pinout Diagram SOIC-8 8-pin small outline IC, 3.9x4.9mm, P1.27mm, JEDEC MS-012. 1 8 2 7 3 6 4 5 SOIC-8
Pino 1 OUT1 — Amplifier 1 output
Pino 2 -IN1 — Amplifier 1 inverting input
Pino 3 +IN1 — Amplifier 1 non-inverting input
Pino 4 V- — Negative supply connection
Pino 5 +IN2 — Amplifier 2 non-inverting input
Pino 6 -IN2 — Amplifier 2 inverting input
Pino 7 OUT2 — Amplifier 2 output
Pino 8 V+ — Positive supply connection

Aplicações típicas

LM2904WHDT é adequado para 6 aplicaçãos: Automotive Sensor Conditioning, Industrial Transducer Interface, Motor Feedback Control, Audio Preamplifier Stage, Active Filter and Integrator, Portable Low-Power Control Board.

🚗

Automotive Sensor Conditioning

The LM2904WHDT fits two-channel sensor-conditioning stages because it combines 2 independent, internally compensated amplifiers in one 8-SOIC package. One channel can amplify or buffer a sensor output while the second channel supports reference comparison or feedback control. The low-power, single-supply architecture is appropriate for distributed automotive electronics where component count and board area matter. STMicroelectronics identifies automotive control systems as an intended application. Before releasing the design, verify the exact automotive qualification status, input common-mode range, output swing, offset voltage, and temperature limits against the sensor and vehicle electrical environment.

🏭

Industrial Transducer Interface

The LM2904WHDT can provide two stages of low-frequency signal conditioning for industrial pressure, position, and temperature transducers. Its 2 independent amplifier channels allow one channel to buffer the transducer while the other applies gain, inversion, or level shifting within the input common-mode range. Internal frequency compensation simplifies conventional feedback networks and can reduce the number of external components. The STMicroelectronics product documentation identifies industrial control systems as an application. Confirm supply voltage, signal bandwidth, output loading, offset accuracy, noise, and the final controller input range before selecting the device.

🔧

Motor Feedback Control

The LM2904WHDT is suitable for low-frequency current or position feedback around industrial and automotive motor-control systems. Its 2 amplifier channels can be assigned to a sensing amplifier and a driver-feedback stage, reducing the number of packages on the controller PCB. Single-ended outputs are convenient for connections to a controller input or comparator. Internal frequency compensation supports standard closed-loop configurations, while the low-power single-supply operation aligns with distributed control electronics. Keep feedback traces short and away from motor-switching nodes, and verify bandwidth, output swing, common-mode range, and response under the expected motor-load conditions.

🎧

Audio Preamplifier Stage

The LM2904WHDT can implement two low-frequency audio preamplifier or mixing channels in an 8-SOIC package. Internal frequency compensation makes each channel suitable for conventional inverting or non-inverting feedback networks, while single-ended outputs simplify connection to a line stage or analog measurement circuit. The dual configuration reduces duplicated package count compared with two single amplifiers. Audio performance still depends on the complete circuit, so evaluate the device's offset, gain-bandwidth, slew rate, output swing, noise, and load behavior against the source impedance and required signal bandwidth before production use.

📡

Active Filter and Integrator

The LM2904WHDT's 2 internally compensated amplifier channels can implement a second-order active filter, a low-frequency integrator, or a combined filtering and sensing arrangement. Internal compensation removes the need for a separate compensation capacitor in conventional feedback networks, helping reduce component count. This is useful in industrial measurement and control boards where analog signals must be filtered before conversion or comparison. Select feedback and passive values using the manufacturer's stability and frequency-response guidance. Verify input common-mode limits, output swing, slew rate, and the accuracy of external resistors and capacitors across the required temperature range.

🔋

Portable Low-Power Control Board

The LM2904WHDT suits portable and distributed control equipment because it provides 2 amplifier channels from a single low-power supply in one compact 8-SOIC package. A channel can buffer a sensor or control a comparator input, while the second handles feedback or an auxiliary interface. The internal frequency compensation and single-ended outputs help reduce board complexity. Power efficiency depends on the chosen supply voltage and operating point, so compare the device's documented supply current with the system duty cycle. Also verify input and output voltage limits, source impedance, noise requirements, and startup behavior before integrating it into a battery-operated design.

What is the LM2904WHDT?
The LM2904WHDT is an STMicroelectronics dual general-purpose operational amplifier with 2 independent, internally frequency-compensated channels in an 8-SOIC package. Each channel provides a single-ended output and accepts differential inputs. According to the STMicroelectronics product documentation, the device was designed for low-power operation from a single supply and is intended for automotive and industrial control systems.
How many operational amplifiers are in LM2904WHDT?
The LM2904WHDT contains 2 independent operational amplifiers. Each amplifier has its own pair of input pins and a single-ended output, while the two channels share the package and supply connections. The STMicroelectronics product page identifies the device as a dual general-purpose operational amplifier, making it suitable for designs requiring two amplification or buffering functions on one PCB.
What package does LM2904WHDT use?
The LM2904WHDT uses an 8-SOIC surface-mount package. The SOIC-8 footprint contains 8 pins: 4 supply-related and signal pins for each of the 2 amplifier channels. The LM2904WHDT ordering suffix identifies the tape-and-reel presentation. Use the manufacturer pin-description table when assigning footprints and PCB net names.
Where can I download the LM2904WHDT datasheet PDF?
The LM2904WHDT datasheet PDF is available through the STMicroelectronics product resources at https://www.st.com/resource/en/datasheet/lm2904.pdf. The document is the primary reference for electrical characteristics, test conditions, pin descriptions, and typical application circuits. Check the document revision shown by STMicroelectronics before using a value in a production design.
Where can I find the LM2904WHDT pinout?
The LM2904WHDT pinout uses the standard 8-SOIC sequence documented by STMicroelectronics: pin 1 is OUT1, pin 2 is minus input 1, pin 3 is plus input 1, pin 4 is V−, pin 5 is plus input 2, pin 6 is minus input 2, pin 7 is OUT2, and pin 8 is V+. Verify every connection against the manufacturer pin-description table before PCB release.
Is LM2904WHDT suitable for automotive and industrial control?
Yes, the LM2904WHDT is intended for automotive and industrial control systems according to the STMicroelectronics product description. Its 2-channel, low-power, single-supply architecture can support sensor conditioning, feedback control, and signal buffering. Qualification requirements for a specific vehicle platform should be confirmed separately from general application suitability.
What is the difference between LM2904WHDT and LM2904WHD?
Both parts identify the same STMicroelectronics LM2904 dual general-purpose operational amplifier in an 8-SOIC package, while the final ordering suffix differentiates the supplied configuration. The LM2904WHDT suffix denotes the tape-and-reel ordering presentation. For a new tape-and-reel BOM line, use the exact ordering code LM2904WHDT and verify reel quantity and orientation with the manufacturer.
Can LM2904WHDT be used as a voltage follower?
Yes, the LM2904WHDT can be configured as a voltage follower by connecting the output of either amplifier to its inverting input and applying the source signal to the non-inverting input. This is useful for high-impedance sensing and buffer stages. Confirm unity-gain stability, input common-mode limits, output swing, and load capability against the STMicroelectronics electrical characteristics.
What is the best drop-in replacement for LM2904WHDT?
The closest replacement is a dual, general-purpose operational amplifier in the same 8-SOIC footprint with the same standard pin assignment. TI LM2904WDT is the leading cross-brand candidate because its LM2904 family is identified in the cross-reference results and uses the same SOIC-8 form factor. Confirm electrical limits, temperature grade, supply range, and sourcing requirements before substituting it.
Is LM2904WDT pin-compatible with LM2904WHDT?
LM2904WDT is a pin-compatible candidate for LM2904WHDT when both are installed in the standard 8-SOIC dual-op-amp footprint and configured in the same standard pin positions. The LM2904 cross-reference results support family-level equivalence, but final qualification should compare input common-mode range, output swing, offset, bandwidth, supply current, and temperature limits. The exact production suffix must also match the assembly format.
When should I choose LM2904WHDT instead of LM2902WDT?
Choose LM2904WHDT when its documented performance, supply behavior, temperature grade, and automotive or industrial suitability fit the design. Choose LM2902WDT when its lower-power characteristics and electrical ratings better match the required load and signal bandwidth. Because both use a common dual SOIC architecture, the decision should be based on the electrical-characteristic table rather than footprint alone.
LM2904WHDT vs LM2904WDT: which is better for an industrial controller?
LM2904WHDT and LM2904WDT are strong candidates for a dual-op-amp PCB because both are 8-SOIC devices in the LM2904 family. LM2904WHDT should be favored when its exact STMicroelectronics ordering configuration, qualification, and regional sourcing are required. LM2904WDT can be considered as a second source after checking voltage range, common-mode range, output swing, offset, bandwidth, and operating temperature.
What can replace LM2904WHDT?
LM2904WHDT can be replaced by a pin-compatible dual general-purpose operational amplifier in an 8-SOIC package. The TI LM2904WDT is a documented family-level candidate, while other LM2904 equivalents from Renesas and Analog Devices may also be considered after package-specific verification. A valid replacement must preserve the pin assignment and remain within the original circuit’s voltage, common-mode, output-swing, bandwidth, and temperature requirements.
Where can I buy LM2904WHDT and get current lead time?
Use the “Request a Quote” form on this page to request LM2904WHDT availability, current lead time, and minimum order quantity. The request identifies the exact 8-SOIC tape-and-reel part without substituting another suffix. For production planning, also confirm the reel quantity, manufacturer shipment condition, and any date-code or traceability requirements in the purchase order.
How should LM2904WHDT be decoupled and laid out?
Place the supply bypass capacitor immediately between the V+ pin 8 and V− pin 4 connections, with a short return path to the ground or supply-reference plane. Keep the two amplifier feedback loops compact, avoid routing them beneath switching nodes or high-current motor paths, and connect input sources with low leakage and suitable impedance. The STMicroelectronics datasheet should guide final capacitor selection and application-circuit layout.

Dados de referência de engenharia para LM2904WHDT — comparação, orientação de projeto e informações de conformidade.

Guia de seleção

Choose LM2904WHDT when the design needs 2 independent general-purpose amplifiers in an 8-SOIC package, operates from a single supply, and benefits from a part explicitly associated with automotive and industrial control applications. It is especially practical when both channels perform related tasks such as sensing, buffering, or feedback control. LM2904WDT is the closest second-source candidate because it uses the same family architecture and footprint, but its electrical limits and ordering configuration must be checked. The remaining LM2904-family candidates can support broader sourcing strategies when their exact manufacturer suffix, qualification, and electrical characteristics are confirmed. For every alternative, compare supply range, common-mode input range, output swing, offset, bandwidth, slew rate, output drive, and temperature range. If any circuit node can exceed the standard LM2904 operating limits, choose a wider-range amplifier family rather than forcing a pin-compatible part into an unsuitable application.

Comparação com alternativas

Parâmetro Este produto LM2904WDT LM2904 LM2904 LM2904 LM2904 LM2904
Brand STMicroelectronics Texas Instruments Renesas Electronics Analog Devices Burr-Brown Philips Toshiba
Package 8-SOIC 8-SOIC 8-SOIC 8-SOIC 8-SOIC 8-SOIC 8-SOIC
Amplifier Count 2 2 2 2 2 2 2
Product Category General-purpose operational amplifier General-purpose operational amplifier General-purpose operational amplifier General-purpose operational amplifier General-purpose operational amplifier General-purpose operational amplifier General-purpose operational amplifier
Output Type Single-ended Single-ended Single-ended Single-ended Single-ended Single-ended Single-ended
Supply Configuration Single supply Single supply Single supply Single supply Single supply Single supply Single supply
Frequency Compensation Internal Internal Internal Internal Internal Internal Internal

Principais diferenciais

  • Two independent channels in one compact package (vs LM2904WDT)
  • Single-supply operation aligned with industrial control designs (vs LM2904)
  • Internal frequency compensation reduces external circuitry (vs LM2902VDG)

Notas de projeto

Place the primary supply bypass capacitor directly between pins 8 (V+) and 4 (V−), with the ground-side connection following a short, low-impedance path to the supply-reference plane. Keep each amplifier's feedback components close to their associated input and output pins. Route the two channels separately when one channel carries a high-level signal and the other handles a sensitive low-level input.

Keep inverting-input and feedback tracks away from switching-node copper, motor windings, inductors, and high-current return paths. A grounded or continuous reference plane helps reduce coupling, but do not interrupt plane current paths to create isolation. For automotive or industrial control boards, keep the analog amplifier area separated from high-switching-current sections and maintain controlled grounding around the 8-SOIC footprint.

Do not treat the 8-SOIC footprint alone as proof of electrical equivalence. Before replacing LM2904WHDT, compare supply range, input common-mode range, output swing, input offset, bandwidth, slew rate, output-current capability, and operating temperature. Also confirm the manufacturer-specific ordering suffix, reel format, and pin orientation because similar dual-amplifier packages may use different exposed-pad or thermal arrangements.

For sensor inputs, keep source impedance and leakage in mind because they can combine with input bias current to create offset and noise. Use the shortest practical input route and place any input filtering capacitor close to the amplifier input. When both channels amplify fast signals, check channel-to-channel coupling through shared supply impedance and use local bypass capacitance rather than relying only on bulk filtering.

Informações de conformidade

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Sem chumbo
Unknown
Sem halogênios
Unknown
Minerais de conflito
Unknown

The product documentation identifies automotive and industrial control applications, but no explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declaration was identified for this ordering code.

Dados verificados em: 2026-11-17 — dados verificados e curados pela equipe de engenharia de componentes da XAIPART

Buscas relacionadas

LM2904WHDT datasheet LM2904WHDT pinout LM2904WHDT datasheet pdf LM2904WHDT equivalent LM2904WHDT replacement LM2904WHDT drop-in replacement LM2904WHDT vs LM2904WDT LM2904WHDT price LM2904WHDT stock STMicroelectronics LM2904WHDT LM2904WHDT 8-SOIC footprint LM2904WHDT automotive sensor circuit

Componentes & termos relacionados

STMicroelectronics LM2904WHDT Texas Instruments LM2904WDT Renesas Electronics Analog Devices Burr-Brown Philips Toshiba dual operational amplifier voltage-feedback amplifier general-purpose amplifier analog semiconductor signal conditioning automotive control systems industrial control systems single supply single-ended output internal frequency compensation 8-SOIC SOIC family surface-mount package feedback control low-power operation
RFQ de cotação rápida
Preencha todos os detalhes — nossa equipe de vendas responderá em até 24 horas
Part number Fabricante Encapsulamento QTY Preço-alvo Total
✓
Cotação enviada!

Responderemos seu e-mail em até 24 horas

1
RFQ enviada
2
Cotação recebida
3
Pedido realizado
4
Pagamento
5
Enviado
6
Entregue
Ver detalhes da RFQ