LPC1813JET100551 - 180MHz 512KB Cortex-M3 | NXP
N.º da peça: LPC1813JET100551 ✓ AtivoLPC1813JET100551 Visão geral
An ARM Cortex-M3 microcontroller is a 32-bit processor core designed for embedded systems, where deterministic control, efficient interrupt handling, and low-power operation are more important than desktop-class computing performance. The LPC18xx family extends the Cortex-M3 architecture with NXP peripherals, fast connectivity interfaces, memory resources, and security-oriented control features. In the system hierarchy, this device is a microcontroller MCU, part of the broader semiconductor category and commonly positioned between simple logic controllers and higher-end application processors.
The LPC1813JET100551 provides 512 KB of flash for firmware and 180 MHz processing performance. Its 100-TFBGA package supports compact, high-density PCB construction, while the LPC1813 device designation distinguishes it from related LPC18xx members with different feature sets. The product listing identifies the part as a single-core Cortex-M3 LPC18xx microcontroller, allowing designers to evaluate processor throughput, peripheral availability, memory requirements, and package complexity against their target application.
For embedded-control designs, the combination of a 180 MHz Cortex-M3 core and 512 KB flash supports responsive control loops, protocol processing, and application logic without moving the design into a more complex processor category. The 100-TFBGA 9x9 mm footprint requires careful PCB layout because its fine-pitch balls, exposed thermal behavior, and routing density make assembly, inspection, and repair more demanding than those of a leaded package.
Typical uses include industrial automation equipment, networked control systems, communications equipment, test and measurement instruments, and connected embedded products. Its application suitability depends on the specific peripheral mix, operating-temperature grade, memory map, and software requirements of the selected LPC1813 variant, all of which should be checked against the manufacturer documentation before schematic release.
A key design consideration is package planning. Because the LPC1813JET100551 uses a 100-TFBGA 9x9 mm package, the PCB should follow the manufacturer land pattern, ball assignment, and recommended escape-routing guidance exactly. Power, ground, decoupling, clock, and high-speed interface routing should be planned together rather than treated as separate schematic tasks.
This product page organizes the exact-orderable MPN, manufacturer identification, core and memory specifications, package details, replacement considerations, and application guidance into a design-oriented reference. It also distinguishes the verified LPC1813 options from related LPC18xx devices so engineers can focus first on footprint and peripheral compatibility rather than treating every family member as interchangeable.
Alternativas drop-in para LPC1813JET100551 — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Variantes desta série
Modelos da mesma série compatíveis como drop-in com LPC1813JET100551 (mesmo formato e footprint) — diferindo em Package, Architecture, Flash Organization.
LPC1813JET100E
✅ Drop-InConsulte o preço
Ver ficha técnica →LPC1812JET100E
✅ Drop-In ⚠️ Especificações não verificadasConsulte o preço
Ver ficha técnica →LPC1811JET100E
✅ Drop-In ⚠️ Especificações não verificadas📋 Alternativa de referência (fora do catálogo)
LPC1813JET100551 Classificações máximas e características elétricas
| Product Type | 32-bit ARM Cortex-M3 microcontroller |
| Processor Core | ARM Cortex-M3 |
| Architecture | 32-bit |
| Frequência máxima de clock | 180 MHz |
| Core Count | 1 core |
| Flash Memory | 512 KB |
| Flash Organization | 512K x 8 bits |
| Product Family | LPC18xx |
| Encapsulamento | 100-TFBGA |
| Package Body Size | 9 x 9 mm |
| Tipo de montagem | Surface mount |
| Number of Package Balls | 100 balls |
Guia de Configuração de Pinos do LPC1813JET100551 100 balls
Configuração de pinos para LPC1813JET100551 (pacote 100 balls). Este CI digital inclui GPIO, interfaces de comunicação (UART, SPI, I2C) e pinos de alimentação. Consulte o datasheet do fabricante para funções alternativas dos pinos e opções de configuração. Essencial para projeto de sistemas embarcados e layout de PCB.
Nenhum dado detalhado de pinagem disponível para LPC1813JET100551.
Consulte a ficha técnica para a configuração completa dos pinos.
Aplicações típicas
LPC1813JET100551 é adequado para 6 aplicaçãos: Industrial Automation Controller, Communications Gateway, Test and Measurement Instrument, Networked Embedded Equipment, Data Acquisition System, Connected Sensor Node.
Industrial Automation Controller
The LPC1813JET100551 fits industrial automation controllers that combine real-time control logic with connected equipment. Its ARM Cortex-M3 core operates at up to 180 MHz, providing ample headroom for motion coordination, state machines, diagnostics, and communication protocols, while 512 KB of flash holds application firmware and control tables. The part is placed directly on the controller main board and programmed through the LPC18xx development ecosystem. Before schematic release, verify the required Ethernet, serial, timer, analog, and communications interfaces against the exact LPC1813 variant. Also confirm the industrial temperature grade and operating conditions. The fine-pitch 100-TFBGA 9 x 9 mm package supports compact equipment but requires a manufacturing process capable of inspecting and soldering high-ball-count BGAs.
Recomendado
Communications Gateway
The LPC1813JET100551 is appropriate for a communications gateway that must manage protocol conversion and data framing while maintaining deterministic embedded response. The 180 MHz Cortex-M3 core can execute network stacks and supervisory logic, and the 512 KB flash provides storage for firmware, configuration templates, and update routines. In this architecture, the MCU interfaces with communications peripherals and controls an external transceiver or network interface. The principal engineering benefit is consolidated control and connectivity processing without moving to a higher-power application processor. Confirm the required MAC, Ethernet, USB, serial, and memory interfaces against the manufacturer documentation, since the general LPC18xx family name alone does not establish the exact peripheral configuration of every ordering code.
Recomendado
Test and Measurement Instrument
The LPC1813JET100551 can serve as the control processor in a test and measurement instrument that combines acquisition control, calibration logic, and a communications interface. Its 180 MHz single-core Cortex-M3 architecture supports responsive command handling and signal-processing algorithms, while 512 KB of flash can hold instrument firmware and lookup tables. The MCU coordinates sensors, DACs, ADCs, relays, and display or communications subsystems through its mixed-signal and serial interfaces. For a high-accuracy measurement design, analog signal paths should remain separate from digital switching and clocks, with grounding and return-current paths planned carefully around the dense BGA footprint. The exact LPC1813 peripheral list and electrical characteristics must be checked before assigning each external function.
Recomendado
Networked Embedded Equipment
The LPC1813JET100551 is suited to networked embedded equipment requiring local control and communications in one package. The Cortex-M3 core executes equipment-control tasks at up to 180 MHz, while the 512 KB flash stores application code and network configuration beyond a simple sensor node. In the design, the MCU manages actuators, local status, and an Ethernet or serial connection while preserving predictable timing for control loops. This consolidation can reduce the number of discrete control components and simplify firmware ownership. The design trade-off is that the 100-TFBGA 9 x 9 mm package increases PCB and assembly complexity compared with a leaded controller. Confirm Ethernet MAC, PHY-interface requirements, memory resources, temperature grade, and software support before choosing the exact LPC1813 ordering suffix.
Recomendado
Data Acquisition System
The LPC1813JET100551 can coordinate a multichannel data acquisition system where sensor timing, buffering, and host communication must be handled together. At 180 MHz, the Cortex-M3 core can run acquisition state machines, filtering, calibration routines, and protocol processing, while 512 KB of flash stores application and configuration firmware. External ADCs or sensors feed the MCU through the applicable serial or parallel interfaces, and a communications interface transfers accumulated data to a host or controller. Care should be taken to match peripheral timing, interrupt latency, and DMA behavior to the acquisition rate. The BGA layout also demands controlled escape routing and solid return paths so digital activity does not disturb sensitive analog references.
Recomendado
Connected Sensor Node
The LPC1813JET100551 can be used in a connected sensor node that performs local filtering, threshold decisions, diagnostics, and network communication. The 180 MHz Cortex-M3 performance is higher than required for a simple sensor interface but supports more capable edge-processing algorithms, while the 512 KB flash stores firmware and application parameters. The node can sample sensors, maintain calibration values, detect events, and forward data through Ethernet, USB, or serial connectivity, depending on the exact peripheral configuration of the selected variant. Selecting the MCU variant early is important because LPC18xx devices differ in connectivity and memory resources. Keep sensor excitation, analog filtering, and sensitive measurement ground paths physically separated from the MCU's clock and high-speed routing.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para LPC1813JET100551 — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | LPC1813JET100E | LPC1812JET100E | LPC1811JET100E |
|---|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Package | 100-TFBGA (9x9 mm) | 100-TFBGA (9x9 mm) | 100-TFBGA (9x9 mm) | 100-TFBGA (9x9 mm) |
| Processor Core | ARM Cortex-M3 | ARM Cortex-M3 | ARM Cortex-M3 | ARM Cortex-M3 |
| Maximum Clock Frequency | 180 MHz | 180 MHz | 180 MHz | 180 MHz |
| Architecture | 32-bit | 32-bit | 32-bit | 32-bit |
| Product Family | LPC18xx | LPC18xx | LPC18xx | LPC18xx |
Principais diferenciais
- Exact LPC1813 feature-family positioning (vs LPC1817JET100E)
- Verified 180 MHz Cortex-M3 performance configuration (vs LPC1813JET100E)
- Exact 100-TFBGA 9 x 9 mm footprint (vs LPC1812JET100E)
Notas de projeto
Use the LPC1813 100-TFBGA land pattern and ball map from the manufacturer documentation without changing ball assignments to simplify routing. Place decoupling capacitors close to the corresponding power balls, provide the required ground balls with uninterrupted connections, and preserve the manufacturer-defined exposed thermal and grounding geometry. The 9 x 9 mm BGA has fine pitch, so assembly capability and inspection access should be confirmed before committing the PCB.
Separate clock, high-speed communications, and sensitive analog or measurement paths from noisy switching nodes and digital return currents. Route continuous ground references beneath controlled signals where appropriate, avoid splitting return paths under the MCU, and keep decoupling current loops compact. For communications or acquisition designs, review edge rates and peripheral timing in the LPC1813 documentation rather than relying only on the nominal 180 MHz CPU frequency.
Do not treat every LPC18xx device with a 100-TFBGA package as an automatic substitute. Confirm the exact processor, flash capacity, Ethernet and USB configuration, peripheral mapping, operating-temperature grade, and ordering suffix. The LPC1813JET100E is the closest documented candidate because it shares the 180 MHz Cortex-M3 core, 512 KB flash, and 100-TFBGA 9 x 9 mm package; lower-numbered family members require an additional feature-level review.
Informações de conformidade
The NXP product information confirms the LPC1813JET100 family and Data Sheet location but does not state the requested compliance classifications. Confirm RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals status from the current manufacturer product documentation before qualification.