NXP Semiconductors

LPC1813JET100551 - 180MHz 512KB Cortex-M3 | NXP

N.º de pieza: LPC1813JET100551 ✓ Activo
100-TFBGA Package 180 MHz Speed 512 KB Memory
MOQ: 1 |

LPC1813JET100551 Descripción general

The NXP Semiconductors LPC1813JET100551 is a high-performance, single-core 32-bit ARM Cortex-M3 microcontroller operating at up to 180 MHz, with 512 KB of flash memory in a 100-TFBGA 9x9 mm package. It belongs to the NXP LPC18xx family and combines a Cortex-M3 processor core with extensive connectivity and embedded-control peripherals for demanding industrial, networking, communications, and data-acquisition designs.

An ARM Cortex-M3 microcontroller is a 32-bit processor core designed for embedded systems, where deterministic control, efficient interrupt handling, and low-power operation are more important than desktop-class computing performance. The LPC18xx family extends the Cortex-M3 architecture with NXP peripherals, fast connectivity interfaces, memory resources, and security-oriented control features. In the system hierarchy, this device is a microcontroller MCU, part of the broader semiconductor category and commonly positioned between simple logic controllers and higher-end application processors.

The LPC1813JET100551 provides 512 KB of flash for firmware and 180 MHz processing performance. Its 100-TFBGA package supports compact, high-density PCB construction, while the LPC1813 device designation distinguishes it from related LPC18xx members with different feature sets. The product listing identifies the part as a single-core Cortex-M3 LPC18xx microcontroller, allowing designers to evaluate processor throughput, peripheral availability, memory requirements, and package complexity against their target application.

For embedded-control designs, the combination of a 180 MHz Cortex-M3 core and 512 KB flash supports responsive control loops, protocol processing, and application logic without moving the design into a more complex processor category. The 100-TFBGA 9x9 mm footprint requires careful PCB layout because its fine-pitch balls, exposed thermal behavior, and routing density make assembly, inspection, and repair more demanding than those of a leaded package.

Typical uses include industrial automation equipment, networked control systems, communications equipment, test and measurement instruments, and connected embedded products. Its application suitability depends on the specific peripheral mix, operating-temperature grade, memory map, and software requirements of the selected LPC1813 variant, all of which should be checked against the manufacturer documentation before schematic release.

A key design consideration is package planning. Because the LPC1813JET100551 uses a 100-TFBGA 9x9 mm package, the PCB should follow the manufacturer land pattern, ball assignment, and recommended escape-routing guidance exactly. Power, ground, decoupling, clock, and high-speed interface routing should be planned together rather than treated as separate schematic tasks.

This product page organizes the exact-orderable MPN, manufacturer identification, core and memory specifications, package details, replacement considerations, and application guidance into a design-oriented reference. It also distinguishes the verified LPC1813 options from related LPC18xx devices so engineers can focus first on footprint and peripheral compatibility rather than treating every family member as interchangeable.

Alternativas directas para LPC1813JET100551 — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.

Variantes de esta serie

Modelos de la misma serie compatibles directamente con LPC1813JET100551 (mismo factor de forma y huella) — difiere en Package, Architecture, Flash Organization.

NXP Semiconductors
Package: TFBGA-100, 9 mm x 9 mm
Architecture: ARM Cortex-M3
Comparar con LPC1813JET100551 →
NXP Semiconductors
Package: 100-pin TFBGA, 9 mm x 9 mm
Flash Organization: 512K x 8
Comparar con LPC1813JET100551 →

LPC1813JET100E

✅ Sustitución directa
NXP Semiconductors
📦 100-TFBGA (9x9 mm)
32-bit ARM Cortex-M3 microcontroller · NXP Semiconductors · 180 MHz · ARM Cortex-M3 · 32-bit · 512 KB · 512K x 8

Consulte el precio

Ver hoja de datos →

LPC1812JET100E

✅ Sustitución directa ⚠️ Especificaciones sin verificar
NXP Semiconductors
📦 100-TFBGA (9x9 mm)
32-bit ARM Cortex-M3 microcontroller · 180 MHz · 512 KB · 104 KB · ARM Cortex-M3 · 32 bit · TFBGA-100, 9 mm x 9 mm · Thin Flip-Ball Grid Array

Consulte el precio

Ver hoja de datos →

LPC1811JET100E

✅ Sustitución directa ⚠️ Especificaciones sin verificar
📦 100-TFBGA (9x9 mm)
Same LPC18xx Cortex-M3 family and 100-TFBGA footprint, but flash memory and the LPC1813 peripheral set can differ; pin and feature review is mandatory

📋 Alternativa de referencia (no en el catálogo)

LPC1813JET100551 Valores máximos y características eléctricas

Product Type 32-bit ARM Cortex-M3 microcontroller
Processor Core ARM Cortex-M3
Architecture 32-bit
Frecuencia de reloj máxima 180 MHz
Core Count 1 core
Flash Memory 512 KB
Flash Organization 512K x 8 bits
Product Family LPC18xx
Encapsulado 100-TFBGA
Package Body Size 9 x 9 mm
Tipo de montaje Surface mount
Number of Package Balls 100 balls

Guía de configuración de pines de LPC1813JET100551 100 balls

Configuración de pines para LPC1813JET100551 (encapsulado 100 balls). Este CI digital incluye GPIO, interfaces de comunicación (UART, SPI, I2C) y pines de alimentación. Consulte la hoja de datos del fabricante para conocer las funciones alternativas de los pines y las opciones de configuración. Esencial para el diseño de sistemas embebidos y el diseño de PCB.

Diagrama de patillaje del encapsulado 100 balls para LPC1813JET100551

No hay datos detallados de patillaje disponibles para LPC1813JET100551.

Consulte la hoja de datos para ver la configuración completa de patillas.

Aplicaciones típicas

LPC1813JET100551 es adecuado para 6 aplicacións: Industrial Automation Controller, Communications Gateway, Test and Measurement Instrument, Networked Embedded Equipment, Data Acquisition System, Connected Sensor Node.

🏭

Industrial Automation Controller

The LPC1813JET100551 fits industrial automation controllers that combine real-time control logic with connected equipment. Its ARM Cortex-M3 core operates at up to 180 MHz, providing ample headroom for motion coordination, state machines, diagnostics, and communication protocols, while 512 KB of flash holds application firmware and control tables. The part is placed directly on the controller main board and programmed through the LPC18xx development ecosystem. Before schematic release, verify the required Ethernet, serial, timer, analog, and communications interfaces against the exact LPC1813 variant. Also confirm the industrial temperature grade and operating conditions. The fine-pitch 100-TFBGA 9 x 9 mm package supports compact equipment but requires a manufacturing process capable of inspecting and soldering high-ball-count BGAs.

🌐

Communications Gateway

The LPC1813JET100551 is appropriate for a communications gateway that must manage protocol conversion and data framing while maintaining deterministic embedded response. The 180 MHz Cortex-M3 core can execute network stacks and supervisory logic, and the 512 KB flash provides storage for firmware, configuration templates, and update routines. In this architecture, the MCU interfaces with communications peripherals and controls an external transceiver or network interface. The principal engineering benefit is consolidated control and connectivity processing without moving to a higher-power application processor. Confirm the required MAC, Ethernet, USB, serial, and memory interfaces against the manufacturer documentation, since the general LPC18xx family name alone does not establish the exact peripheral configuration of every ordering code.

📺

Test and Measurement Instrument

The LPC1813JET100551 can serve as the control processor in a test and measurement instrument that combines acquisition control, calibration logic, and a communications interface. Its 180 MHz single-core Cortex-M3 architecture supports responsive command handling and signal-processing algorithms, while 512 KB of flash can hold instrument firmware and lookup tables. The MCU coordinates sensors, DACs, ADCs, relays, and display or communications subsystems through its mixed-signal and serial interfaces. For a high-accuracy measurement design, analog signal paths should remain separate from digital switching and clocks, with grounding and return-current paths planned carefully around the dense BGA footprint. The exact LPC1813 peripheral list and electrical characteristics must be checked before assigning each external function.

🖥️

Networked Embedded Equipment

The LPC1813JET100551 is suited to networked embedded equipment requiring local control and communications in one package. The Cortex-M3 core executes equipment-control tasks at up to 180 MHz, while the 512 KB flash stores application code and network configuration beyond a simple sensor node. In the design, the MCU manages actuators, local status, and an Ethernet or serial connection while preserving predictable timing for control loops. This consolidation can reduce the number of discrete control components and simplify firmware ownership. The design trade-off is that the 100-TFBGA 9 x 9 mm package increases PCB and assembly complexity compared with a leaded controller. Confirm Ethernet MAC, PHY-interface requirements, memory resources, temperature grade, and software support before choosing the exact LPC1813 ordering suffix.

🔧

Data Acquisition System

The LPC1813JET100551 can coordinate a multichannel data acquisition system where sensor timing, buffering, and host communication must be handled together. At 180 MHz, the Cortex-M3 core can run acquisition state machines, filtering, calibration routines, and protocol processing, while 512 KB of flash stores application and configuration firmware. External ADCs or sensors feed the MCU through the applicable serial or parallel interfaces, and a communications interface transfers accumulated data to a host or controller. Care should be taken to match peripheral timing, interrupt latency, and DMA behavior to the acquisition rate. The BGA layout also demands controlled escape routing and solid return paths so digital activity does not disturb sensitive analog references.

🧩

Connected Sensor Node

The LPC1813JET100551 can be used in a connected sensor node that performs local filtering, threshold decisions, diagnostics, and network communication. The 180 MHz Cortex-M3 performance is higher than required for a simple sensor interface but supports more capable edge-processing algorithms, while the 512 KB flash stores firmware and application parameters. The node can sample sensors, maintain calibration values, detect events, and forward data through Ethernet, USB, or serial connectivity, depending on the exact peripheral configuration of the selected variant. Selecting the MCU variant early is important because LPC18xx devices differ in connectivity and memory resources. Keep sensor excitation, analog filtering, and sensitive measurement ground paths physically separated from the MCU's clock and high-speed routing.

Resumen de productos recomendados

LPC1813JET100 Base LPC1813 device family member Se usa en: Industrial Automation Controller, Communications Gateway, Test and Measurement Instrument, Networked Embedded Equipment, Data Acquisition System, Connected Sensor Node LPC1813JET100E NXP Semiconductors Se usa en: Industrial Automation Controller, Test and Measurement Instrument, Data Acquisition System LPC1817JET100E NXP Semiconductors Se usa en: Communications Gateway, Networked Embedded Equipment, Connected Sensor Node
What is the LPC1813JET100551?
The LPC1813JET100551 is a single-core 32-bit NXP microcontroller based on the ARM Cortex-M3 processor. According to the NXP LPC1813JET100 product page, it operates at up to 180 MHz, contains 512 KB of flash memory, and is supplied in a 100-TFBGA package measuring 9 x 9 mm. It is intended for embedded systems requiring more processing performance and memory than a basic 8-bit controller.
What are the key specifications of LPC1813JET100551 that engineers should know?
The LPC1813JET100551 combines a 32-bit ARM Cortex-M3 core, a maximum clock frequency of 180 MHz, 512 KB of 512K x 8 flash memory, and a 100-TFBGA 9 x 9 mm package. The NXP product information identifies the device as a single-core member of the LPC18xx family. These four parameters establish its performance class, firmware-storage capacity, footprint, and technology level before peripheral-level design review.
Where can I download the LPC1813JET100 datasheet PDF?
The official LPC1813JET100 product page at NXP provides the manufacturer Data Sheet and documentation for the LPC1813 device family. Open the LPC1813JET100 product page linked on this page and select its Data Sheet PDF. The exact-orderable LPC1813JET100551 identification should be cross-checked against the ordering information and package drawing in the manufacturer documentation.
Where can I find the LPC1813JET100551 pinout?
The LPC1813JET100551 pinout is defined by the LPC1813 Data Sheet and the 100-TFBGA ball-map drawing rather than by a distributor listing. Use the pin-description and package-outline sections of the manufacturer documentation to identify every ball, power domain, ground connection, and exposed thermal connection. Do not derive routing directly from the generic 100-ball package image.
Can LPC1813JET100E replace LPC1813JET100551?
The LPC1813JET100E is the closest verified same-footprint candidate for an LPC1813JET100551 replacement assessment. Both are identified as 180 MHz, 512 KB, single-core ARM Cortex-M3 LPC18xx devices in a 100-TFBGA 9 x 9 mm package. Confirm the ordering suffix, temperature grade, packing method, and device revision before approving a production substitution.
What can replace the LPC1813JET100551 on an existing PCB?
The LPC1813JET100E is the principal verified drop-in candidate because it matches the LPC1813JET100551 in processor architecture, 180 MHz clock rating, 512 KB flash configuration, and 100-TFBGA 9 x 9 mm package. A cross-manufacturer drop-in could not be confirmed from the manufacturer and cross-reference records, so it should not be selected without a completed pin, peripheral, clock, and software compatibility review.
Is LPC1813JET100551 suitable for industrial automation equipment?
The LPC1813JET100551 can suit industrial automation equipment when its specific interface, memory, temperature, and lifecycle requirements meet the system specification. Its 180 MHz ARM Cortex-M3 core provides responsive real-time control, while 512 KB of flash stores application firmware and protocol logic. The selected LPC1813 variant must also be checked for the required industrial temperature grade and peripheral set.
LPC1813JET100551 vs LPC1817JET100E - which is better for a connected controller?
Choose the LPC1813JET100551 when its verified 512 KB flash, 180 MHz clock, and LPC1813 peripheral set satisfy the controller design. The LPC1817JET100E is a related LPC18xx device, but the available comparison information does not establish identical pin, peripheral, memory, or software behavior. For a drop-in decision, verify the LPC1817 datasheet against every used LPC1813 signal and the required connectivity features.
LPC1813JET100551 vs LPC1813JET100E - what is the difference?
Both LPC1813JET100551 and LPC1813JET100E are described as 180 MHz, single-core, 32-bit ARM Cortex-M3 LPC18xx microcontrollers with 512 KB of flash in a 100-TFBGA 9 x 9 mm package. The main differences may occur in ordering code, temperature grade, packing, or revision rather than the headline core and memory specifications. Confirm those manufacturing fields before substitution.
When should I choose LPC1813JET100551 instead of LPC1813JET100E?
Choose LPC1813JET100551 when that exact ordering code meets your production temperature, packing, revision, and procurement requirements. Choose LPC1813JET100E when its corresponding grade and packaging are preferable but its processor, memory, package, and electrical characteristics still match. Because both parts are closely related, the deciding information is usually orderable-grade control rather than application-level performance.
Is LPC1813JET100551 the same as LPC1813JET100E?
The LPC1813JET100551 and LPC1813JET100E are not identical orderable codes, although both are associated with the 180 MHz, 512 KB, 100-TFBGA LPC1813 configuration. The suffix can encode commercial details such as grade, packing, or lifecycle treatment. Treat them as substitutes only after those fields and the current manufacturer ordering information have been reconciled.
Where to buy LPC1813JET100551 online?
Use the Request a Quote form on this page to request LPC1813JET100551 availability, authorized sourcing, and order confirmation. The request should include the exact MPN LPC1813JET100551, required quantity, and acceptable delivery schedule. This avoids ambiguity with the closely related LPC1813JET100E ordering code and ensures the quote is tied to the intended device.
What is the price of LPC1813JET100551?
The current LPC1813JET100551 price is presented through the Request a Quote form on this page rather than as a fixed customer-facing figure. Submit the exact MPN, quantity, and shipment requirements for a quotation tied to the requested amount. This is especially important because LPC1813JET100551 and LPC1813JET100E have similar descriptions but different ordering suffixes.
What is the lead time for LPC1813JET100551?
The current lead time for LPC1813JET100551 should be requested through the Request a Quote form on this page. Include the quantity, target delivery date, and whether factory-sealed packaging is required. The form provides a channel for a procurement response tied to the exact MPN rather than to a related LPC1813 variant.
Is LPC1813JET100551 in stock?
Current LPC1813JET100551 stock status should be confirmed through the Request a Quote form on this page. Submit the exact MPN and required quantity so the response reflects the intended package code and order quantity. Do not treat availability shown for LPC1813JET100E or another LPC18xx device as confirmation for LPC1813JET100551.

Datos de referencia de ingeniería para LPC1813JET100551 — comparación, orientación de diseño e información de cumplimiento.

Guía de selección

Choose the LPC1813JET100551 when the design requires the specific LPC1813 configuration, 180 MHz ARM Cortex-M3 processing, 512 KB of flash, and a 100-TFBGA 9 x 9 mm footprint. The LPC1813JET100E is the closest replacement candidate because its listed processor, clock, memory, and package match; use it when its ordering-grade, packing, and lifecycle attributes better fit production. LPC1812JET100E and LPC1811JET100E share the LPC18xx platform and package family, but they may differ in flash capacity, Ethernet resources, and other LPC1813-specific features, making them conditional substitutes rather than automatic replacements. For any migration, compare the manufacturer pin and peripheral tables, operating-temperature requirements, clock setup, memory map, boot behavior, and firmware dependencies. No verified cross-manufacturer drop-in was identified, so a different supplier's MCU should not be approved solely from a similar product description.

Comparación con alternativas

Parámetro Este producto LPC1813JET100E LPC1812JET100E LPC1811JET100E
Brand NXP Semiconductors NXP Semiconductors NXP Semiconductors NXP Semiconductors
Package 100-TFBGA (9x9 mm) 100-TFBGA (9x9 mm) 100-TFBGA (9x9 mm) 100-TFBGA (9x9 mm)
Processor Core ARM Cortex-M3 ARM Cortex-M3 ARM Cortex-M3 ARM Cortex-M3
Maximum Clock Frequency 180 MHz 180 MHz 180 MHz 180 MHz
Architecture 32-bit 32-bit 32-bit 32-bit
Product Family LPC18xx LPC18xx LPC18xx LPC18xx

Diferenciadores clave

  • Exact LPC1813 feature-family positioning (frente a LPC1817JET100E)
  • Verified 180 MHz Cortex-M3 performance configuration (frente a LPC1813JET100E)
  • Exact 100-TFBGA 9 x 9 mm footprint (frente a LPC1812JET100E)

Notas de diseño

Use the LPC1813 100-TFBGA land pattern and ball map from the manufacturer documentation without changing ball assignments to simplify routing. Place decoupling capacitors close to the corresponding power balls, provide the required ground balls with uninterrupted connections, and preserve the manufacturer-defined exposed thermal and grounding geometry. The 9 x 9 mm BGA has fine pitch, so assembly capability and inspection access should be confirmed before committing the PCB.

Separate clock, high-speed communications, and sensitive analog or measurement paths from noisy switching nodes and digital return currents. Route continuous ground references beneath controlled signals where appropriate, avoid splitting return paths under the MCU, and keep decoupling current loops compact. For communications or acquisition designs, review edge rates and peripheral timing in the LPC1813 documentation rather than relying only on the nominal 180 MHz CPU frequency.

Do not treat every LPC18xx device with a 100-TFBGA package as an automatic substitute. Confirm the exact processor, flash capacity, Ethernet and USB configuration, peripheral mapping, operating-temperature grade, and ordering suffix. The LPC1813JET100E is the closest documented candidate because it shares the 180 MHz Cortex-M3 core, 512 KB flash, and 100-TFBGA 9 x 9 mm package; lower-numbered family members require an additional feature-level review.

Información de cumplimiento

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Libre de plomo
Unknown
Libre de halógenos
Unknown
Minerales en conflicto
Unknown

The NXP product information confirms the LPC1813JET100 family and Data Sheet location but does not state the requested compliance classifications. Confirm RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals status from the current manufacturer product documentation before qualification.

Datos verificados el: 2026-11-20 — datos verificados y seleccionados por el equipo de ingeniería de componentes de XAIPART

Búsquedas relacionadas

LPC1813JET100551 datasheet LPC1813JET100551 specifications LPC1813JET100551 pinout LPC1813JET100551 datasheet pdf LPC1813JET100551 replacement LPC1813JET100551 equivalent LPC1813JET100551 drop-in replacement LPC1813JET100551 vs LPC1813JET100E LPC1813JET100551 price LPC1813JET100551 stock NXP LPC1813JET100551 LPC1813JET100551 application circuit

Componentes & términos relacionados

NXP Semiconductors LPC1813JET100551 LPC1813JET100 LPC1813JET100E LPC1812JET100E LPC1811JET100E LPC1817JET100E ARM Cortex-M3 microcontroller MCU 32-bit microprocessor embedded processor LPC18xx family single-core processor 180 MHz clock 512 KB flash memory 100-TFBGA BGA package surface-mount package Ethernet controller industrial automation communications gateway data acquisition IoT sensor node
RFQ de presupuesto rápido
Complete los detalles — nuestro equipo de ventas responderá en un plazo de 24 horas
Número de pieza Fabricante Encapsulado QTY Precio objetivo Total
✓
¡Presupuesto enviado!

Responderemos a su correo electrónico en un plazo de 24 horas

1
RFQ enviado
2
Presupuesto recibido
3
Pedido realizado
4
Pago
5
Enviado
6
Entregado
Ver detalles del RFQ