Analog Devices

LT1014DSW - Quad Precision Op Amp, 5V-44V | Analog Devices

N.º da peça: LT1014DSW ✓ Ativo
5 V to 44 V Vdss 500 uA Id 16-lead SO surface-mount package Package
MOQ: 1 |

LT1014DSW Visão geral

The Analog Devices LT1014DSW is a low-power quad precision operational amplifier with four amplifiers per package, support for ±15 V and single 5 V supplies, a 5 V to 44 V wide supply range, and a 16-lead small-outline surface-mount package. The device combines low-voltage noise of 0.55 uV peak-to-peak from 0.1 Hz to 10 Hz with guaranteed maximum supply current of 500 uA.

An operational amplifier is an analog integrated circuit that amplifies the voltage difference between its two inputs while using negative feedback to establish gain, filtering, buffering, and signal-conditioning behavior. The LT1014 belongs to the precision operational amplifier hierarchy, where low offset voltage, low drift, low noise, and high open-loop gain support accurate measurements rather than general-purpose signal amplification. Four independent amplifiers in one package also reduce board area in multichannel analog systems.

The LT1014DSW operates from single 5 V or dual ±15 V supplies. Its low-voltage noise of 0.55 uV peak-to-peak and current-noise density of 0.07 pA per square-root hz are useful for high-impedance sensor interfaces, strain-gauge amplifiers, and precision current-loop transmitters. The maximum supply current of 500 uA supports battery-powered instrumentation where current consumption is important.

Analog Devices describes the LT1014 as the first precision quad operational amplifier that upgrades designs using the industry-standard 14-pin DIP configuration associated with LM324, LM348, OP-11, and 4156 devices. The LT1014DSW places four precision amplifiers in a 16-lead SO package. Compared with the referenced older quad devices, the LT1014 family emphasizes precision offset and drift characteristics, low noise, high gain, and low supply current while retaining a familiar quad operational-amplifier organization.

Typical applications include battery-powered precision instrumentation, strain-gauge signal conditioners, thermocouple amplifiers, instrumentation-amplifier input stages, 4 mA to 20 mA current-loop transmitters, multiple-limit threshold detectors, and active filters. Multiple independent channels can process several sensor signals while sharing supply filtering and board space. In active filters, the four channels may implement cascaded stages or parallel signal paths, provided each amplifier remains inside its specified common-mode and output limits.

Designers should verify input common-mode range, output swing, supply headroom, stability with the selected load capacitance, and offset requirements against the application. Decoupling capacitors should be placed close to the supply pins, while precision feedback and gain-setting resistors should be selected for the required noise and temperature-drift performance. The LT1014DSW is appropriate when low noise, low supply current, and four precision channels are more important than the lower cost or simplicity of a general-purpose amplifier.

Alternativas drop-in para LT1014DSW — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.

Variantes desta série

Modelos da mesma série compatíveis como drop-in com LT1014DSW (mesmo formato e footprint) — diferindo em Amplifier Type, Low-Voltage Noise, Mounting Type, Number of Amplifiers, Package.

Texas Instruments
Amplifier Type: Precision Operational Amplifier
Mounting Type: Through-Hole
Comparar com LT1014DSW →
Analog Devices
Low-Voltage Noise: 0.55 µV peak-to-peak from 0.1 Hz to 10 Hz
Number of Amplifiers: 4 amplifiers
Package: 16-lead SOIC, 2.64 mm height
Comparar com LT1014DSW →

LT1014ISW

✅ Drop-In
Analog Devices
📦 SO-16
4 amplifiers · 50 µV offset voltage · 50 µV maximum · 0.3 µV/°C · 0.15 nA · 8 million V/V · 117 dB · 120 dB

Consulte o preço

Ver ficha técnica →

LT1014ASW

✅ Drop-In ⚠️ Especificações não verificadas
📦 SO-16
Same four-amplifier SO-16 footprint and approximately 90% parametric proximity; grade and temperature-range markings differ.

📋 Alternativa de referência (fora do catálogo)

LT1014CSW

✅ Drop-In ⚠️ Especificações não verificadas
📦 SO-16
Same four-amplifier SO-16 footprint and approximately 90% parametric proximity; grade and temperature-range markings differ.

📋 Alternativa de referência (fora do catálogo)

LT1014DSW Classificações máximas e características elétricas

Amplifier Type Quad precision operational amplifier
Number of Amplifiers 4 circuits
Supply Voltage Range 5 V to 44 V
Single-Supply Operation 5 V
Dual-Supply Operation ±15 V
Guaranteed Maximum Supply Current 500 uA
Low-Voltage Noise 0.55 uV peak-to-peak at 0.1 Hz to 10 Hz
Current Noise Density 0.07 pA/sqrt(Hz)
Encapsulamento 16-lead SO surface-mount package
Tipo de montagem Surface Mount

Guia de Configuração de Pinos do LT1014DSW 16-lead so surface-mount package

Configuração de pinos para LT1014DSW (pacote 16-lead so surface-mount package). Este componente analógico possui pinos de entrada, saída e alimentação. Consulte o datasheet do fabricante para configurações de offset null, compensação e pino de enable. Ideal para circuitos de condicionamento de sinal e amplificadores.

Diagrama de pinagem do pacote 16-lead so surface-mount package para LT1014DSW

Nenhum dado detalhado de pinagem disponível para LT1014DSW.

Consulte a ficha técnica para a configuração completa dos pinos.

Aplicações típicas

LT1014DSW é adequado para 6 aplicaçãos: Battery-Powered Precision Instrumentation, Strain-Gauge Signal Conditioning, Thermocouple Amplification, 4 mA to 20 mA Current-Loop Transmitters, Precision Active Filters, Multiple-Limit Threshold Detection.

🔋

Battery-Powered Precision Instrumentation

The LT1014DSW fits battery-powered instrumentation because it combines four precision amplifier channels with a guaranteed maximum supply current of 500 uA. It can operate from a single 5 V rail, reducing the need for dual-supply conversion in portable measurement systems. Low-voltage noise of 0.55 uV peak-to-peak from 0.1 Hz to 10 Hz helps preserve small-signal resolution, while 0.07 pA per square-root hz current noise is useful with high-impedance sources. Designers can use separate channels for sensor conditioning, filtering, reference buffering, and output-stage functions, subject to common-mode and output-swing limits.

📏

Strain-Gauge Signal Conditioning

The LT1014DSW is suitable for strain-gauge front ends that amplify small differential sensor voltages while requiring low input-referred noise and low supply consumption. Its 0.55 uV peak-to-peak low-frequency noise and 0.07 pA per square-root hz current-noise density reduce the electrical noise floor relative to many general-purpose amplifiers. Two channels can form instrumentation-amplifier functions, while the remaining channels can provide gain, active filtering, or reference buffering. Component selection for the input bias-current, common-mode range, offset drift, and output-swing requirements must be completed against the manufacturer specifications.

🌡️

Thermocouple Amplification

The LT1014DSW fits low-level thermocouple amplification because thermocouple outputs can be only tens of microvolts per degree and therefore demand low offset, low noise, and stable gain. The device's 0.55 uV peak-to-peak noise from 0.1 Hz to 10 Hz is particularly relevant to slow temperature measurements with substantial low-frequency content. Four channels allow multiple thermocouples or auxiliary cold-junction and filtering functions to share a compact package. The actual error budget must also account for input offset voltage, temperature coefficient, common-mode range, resistor tolerance, and thermocouple connection parasitics.

📡

4 mA to 20 mA Current-Loop Transmitters

The LT1014DSW supports 4 mA to 20 mA current-loop transmitter signal paths where low offset and low noise improve the accuracy of the measured control signal. Its low 500 uA maximum supply current and 5 V single-supply capability are useful for compact field transmitters. Individual channels can support current-loop drive, error amplification, filtering, or threshold functions. The amplifier must remain within its input common-mode range and output-swing limits at the operating supply voltage, and the output-current compliance and precision requirements of the complete transmitter need separate verification.

🎛️

Precision Active Filters

The LT1014DSW is well suited to active-filter implementations that need four precision channels, low noise, and a wide supply range from 5 V to 44 V. Its channels can realize cascaded low-pass, high-pass, or band-pass sections when the required gain and phase margins are met. Low-voltage noise of 0.55 uV peak-to-peak is useful when filter output amplitude is small, while the 0.07 pA per square-root hz current-noise specification matters for high-source-impedance networks. Gain-setting resistors should be matched appropriately, and stability with real loads and stray capacitance should be evaluated in simulation and hardware.

🚦

Multiple-Limit Threshold Detection

The LT1014DSW can implement several independent precision threshold detectors in one 16-lead package, allowing one device to monitor different voltages or control levels. Each amplifier can compare a signal against a reference and provide an amplified or buffered threshold output. The low noise and low supply current support compact monitoring systems, while operation from a single 5 V supply simplifies power architecture. Comparator-like designs still require attention to input offset, common-mode limits, output logic levels, propagation behavior in amplifier operation, and resistor tolerances that determine the actual switching thresholds.

Resumo dos produtos recomendados

LT1014ISW Analog Devices Usado em: Battery-Powered Precision Instrumentation, Strain-Gauge Signal Conditioning, Thermocouple Amplification, 4 mA to 20 mA Current-Loop Transmitters LT1014ASW Same-family quad amplifier for alternative grade assessment Usado em: Precision Active Filters LT1014CSW Same-family quad amplifier for alternate grade assessment Usado em: Multiple-Limit Threshold Detection
What are the key specifications of LT1014DSW that engineers should know?
The LT1014DSW is a quad precision operational amplifier with four amplifier circuits, a 5 V to 44 V supply range, ±15 V or single 5 V operation, 500 uA maximum supply current, and 0.55 uV peak-to-peak noise from 0.1 Hz to 10 Hz. According to the Analog Devices LT1014 product page, it also offers 0.07 pA per square-root hz current-noise density. The device is packaged in a 16-lead SO surface-mount configuration.
Where can I download the LT1014DSW datasheet PDF?
The official LT1013/LT1014 datasheet is available from Analog Devices at https://www.analog.com/media/en/technical-documentation/data-sheets/LT1013-LT1014.pdf. It covers the LT1013 dual and LT1014 quad precision operational amplifiers, including supply conditions, electrical characteristics, pin descriptions, and application information. Use the LT1014 section and the DS suffix ordering information when evaluating the LT1014DSW.
What does LT1014DSW do and how many amplifiers does it contain?
The LT1014DSW contains four independent precision operational amplifiers in one 16-lead package. Each amplifier uses feedback to control gain and can perform amplification, buffering, filtering, threshold detection, and signal conditioning. According to the Analog Devices product page, the LT1014 is a precision quad amplifier designed for instrumentation applications where low offset, low noise, and low supply current are more important than general-purpose economy.
What is the LT1014DSW supply voltage range?
The LT1014DSW operates from 5 V to 44 V across its supply range. It is also specified for single 5 V and dual ±15 V operating conditions. The Texas Instruments LT1014 product page identifies the same 5 V to 44 V wide-supply range. Actual usable output voltage depends on input common-mode limits, output swing, supply headroom, and the selected load.
What is the noise performance of LT1014DSW?
The LT1014DSW has a specified low-voltage noise of 0.55 uV peak-to-peak over 0.1 Hz to 10 Hz. Analog Devices also identifies low current noise of 0.07 pA per square-root hz. These characteristics make the device suitable for precision transducer, strain-gauge, thermocouple, and low-current signal-conditioning circuits where input-referred noise can determine the usable measurement resolution.
Is LT1014DSW suitable for battery-powered instrumentation?
Yes, the LT1014DSW is suitable for battery-powered precision instrumentation because its guaranteed maximum supply current is 500 uA. It also operates from a single 5 V supply, which simplifies systems that cannot provide dual rails. The Analog Devices product page explicitly lists battery-powered precision instrumentation, strain-gauge signal conditioners, thermocouple amplifiers, and current-loop transmitters among its applications.
Where can I find the LT1014DSW pinout and package information?
Use the LT1013/LT1014 manufacturer datasheet for the authoritative LT1014DSW pin description and connection diagram. The device is a 16-lead SO surface-mount package, and the ordering information distinguishes the DS package suffix from related grade and temperature-range variants. Assign PCB tracks directly from the manufacturer pin-description table rather than relying on a generic amplifier diagram.
What is the best drop-in replacement for LT1014DSW?
The closest documented same-brand drop-in option is the Analog Devices LT1014ISW because it uses the same SO-16 footprint and four-amplifier organization. Its selection should still be confirmed against the required temperature range, grade, offset, noise, and supply limits. The cross-reference information identifies only limited pin-to-pin options, so PCB or qualification requirements should not be assumed to be identical without reviewing the manufacturer ordering information.
What can replace an LT1014DSW without changing the PCB?
An LT1014DSW replacement should retain a 16-lead SO footprint, four amplifier channels, compatible power pins, and the required electrical limits. LT1014ISW is a same-family candidate because it appears as an equivalent in the LT1014SOP16 cross-reference information. Before substitution, verify temperature grade, input offset and drift, supply current, noise, common-mode range, output swing, and manufacturer change-control documentation.
LT1014DSW vs LT1014ISW: which is the better replacement?
LT1014ISW is the stronger candidate when the PCB requires the same SO-16 footprint and the design can meet its operating-temperature grade. The LT1014DSW is the commercial ordering designation shown for the target, while LT1014ISW appears as a related equivalent in the LT1014SOP16 cross-reference information. The final choice depends on the required ambient-temperature range and whether any grade-specific electrical limits apply.
Is LT1014DSW the same as LT1013DDRE4?
No, the LT1013DDRE4 is not an exact functional or pin-for-pin substitute for the four-amplifier LT1014DSW. Although both belong to the LT1013/LT1014 precision operational-amplifier family, the LT1013 is a dual precision amplifier and the LT1014 is a quad precision amplifier. Their channel counts, circuit organization, and appropriate PCB assignments differ, so a board redesign is required.
When should I choose LT1014DSW over a general-purpose quad op amp?
Choose the LT1014DSW when the application needs low noise, precision offset behavior, low supply current, and four independent amplifier channels in one package. It is particularly appropriate for battery-powered sensors, strain gauges, thermocouples, current-loop transmitters, active filters, and precision threshold circuits. A general-purpose amplifier may be simpler or less costly, but it can introduce higher noise, offset, drift, or supply current.
Where can I buy LT1014DSW and check current price and stock?
Use the Request a Quote form on this page to request current LT1014DSW price, stock status, lead time, and order quantities. The form is the appropriate channel because commercial terms can change by quantity and market conditions. The manufacturer product page identifies the LT1014 family and its intended applications, while current transaction details should be confirmed through the quote request.
What is the lead time for LT1014DSW?
Current LT1014DSW lead time should be requested through the Request a Quote form on this page rather than inferred from historical availability. Lead time can vary with order quantity, package suffix, manufacturing status, and supply conditions. Provide the exact LT1014DSW MPN and required quantity so the commercial response reflects the correct ordering configuration.
Is LT1014DSW in stock?
The current LT1014DSW stock position should be confirmed through the Request a Quote form on this page. Inventory can vary by exact package suffix, order quantity, and fulfillment date, and an active manufacturer family does not by itself guarantee immediate stock. Submit the exact MPN and quantity for the latest commercial confirmation.
Does LT1014DSW support tool compatibility and RoHS requirements?
The LT1014DSW is a conventional 16-lead surface-mount analog IC, but its detailed PCB footprint, assembly controls, and material-compliance documentation should be checked in the LT1013/LT1014 manufacturer datasheet and current product documentation. RoHS and REACH status must be confirmed for the exact ordering code, particularly when the DS suffix and lead-free marking combination differ. Use the pin table and package drawing for land-pattern implementation.

Dados de referência de engenharia para LT1014DSW — comparação, orientação de projeto e informações de conformidade.

Guia de seleção

Choose the LT1014DSW for battery-powered or precision analog designs requiring four low-noise amplifier channels, operation from a 5 V single supply, and compatibility with the wider ±15 V supply range. Its 500 uA maximum supply current and 0.55 uV peak-to-peak low-frequency noise are useful in strain-gauge, thermocouple, current-loop, filter, and threshold-detection systems. Consider LT1014ISW when the SO-16 footprint remains fixed and its grade or temperature range is a better fit; verify all ordering limits before changing the design. LT1014ASW and LT1014CSW are same-family SO-16 candidates, but their grade-specific operating and electrical requirements must be confirmed in the manufacturer ordering documentation. Do not select LT1013DDRE4 as a direct replacement because it is a dual amplifier and requires different channel assignments.

Comparação com alternativas

Parâmetro Este produto LT1014ISW LT1014ASW LT1014CSW
Package SO-16 SO-16 SO-16 SO-16
Brand Analog Devices Analog Devices Analog Devices Analog Devices
Amplifier Count 4 circuits 4 circuits 4 circuits 4 circuits

Principais diferenciais

  • Four precision channels in one compact SO-16 package (vs LT1013DDRE4)
  • Specified low-voltage noise for precision measurements (vs LT1014ISW)
  • Wide supply capability for single and dual rails (vs LT1014ASW)

Notas de projeto

Place the supply bypass capacitor close to the positive and ground pins, with a short return path that avoids shared copper resistance between sensitive amplifier channels. The LT1014DSW operates from a single 5 V supply or dual ±15 V rails, but the usable signal range still depends on common-mode and output-swing limits. Do not treat the full 5 V to 44 V supply capability as a guarantee that every input and output combination remains linear.

Use the manufacturer pin-description table and package drawing when assigning all 16 PCB connections. Keep high-impedance input nodes short, shield them from clock, relay, and switching-converter paths, and avoid routing them beneath switching nodes. Precision gain networks benefit from short, symmetric routing and stable reference grounding because PCB leakage and temperature gradients can otherwise undermine the benefit of low input-referred noise.

Do not substitute the dual LT1013 for the quad LT1014 without redesigning the channel assignments and signal path. The LT1013DDRE4 may appear in family comparisons, but it has two amplifiers rather than four and therefore is not a drop-in replacement. Likewise, confirm the temperature grade of any SO-16 LT1014 replacement against the ambient range and production requirements before approving the substitution.

Informações de conformidade

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Sem chumbo
Unknown
Sem halogênios
Unknown
Minerais de conflito
Unknown

Compliance status for the exact LT1014DSW ordering code must be confirmed through current Analog Devices product documentation. The related LT1014DSW#PBF listing identifies a lead-free ordering option, but that status was not assigned to the unqualified LT1014DSW MPN.

Dados verificados em: 2026-11-09 — dados verificados e curados pela equipe de engenharia de componentes da XAIPART

Buscas relacionadas

lt1014dsw pbf LT1014DSW datasheet LT1014DSW datasheet pdf LT1014DSW pinout LT1014DSW specifications LT1014DSW equivalent LT1014DSW replacement LT1014DSW cross reference LT1014DSW SO-16 footprint LT1014DSW application circuit LT1014DSW price LT1014DSW stock

Componentes & termos relacionados

Analog Devices LT1014DSW LT1014ISW LT1014ASW LT1014CSW LT1013DDRE4 quad precision operational amplifier precision operational amplifier operational amplifier analog integrated circuit signal conditioner instrumentation amplifier strain-gauge amplifier thermocouple amplifier current-loop transmitter active filter low-dropout terminology input offset voltage input-referred noise current-noise density PSRR SO-16 surface-mount package single-supply operation dual-supply operation
RFQ de cotação rápida
Preencha todos os detalhes — nossa equipe de vendas responderá em até 24 horas
Part number Fabricante Encapsulamento QTY Preço-alvo Total
✓
Cotação enviada!

Responderemos seu e-mail em até 24 horas

1
RFQ enviada
2
Cotação recebida
3
Pedido realizado
4
Pagamento
5
Enviado
6
Entregue
Ver detalhes da RFQ