LT1014DSW - Quad Precision Op Amp, 5V-44V | Analog Devices
料号: LT1014DSW ✓ 量产中LT1014DSW 概述
An operational amplifier is an analog integrated circuit that amplifies the voltage difference between its two inputs while using negative feedback to establish gain, filtering, buffering, and signal-conditioning behavior. The LT1014 belongs to the precision operational amplifier hierarchy, where low offset voltage, low drift, low noise, and high open-loop gain support accurate measurements rather than general-purpose signal amplification. Four independent amplifiers in one package also reduce board area in multichannel analog systems.
The LT1014DSW operates from single 5 V or dual ±15 V supplies. Its low-voltage noise of 0.55 uV peak-to-peak and current-noise density of 0.07 pA per square-root hz are useful for high-impedance sensor interfaces, strain-gauge amplifiers, and precision current-loop transmitters. The maximum supply current of 500 uA supports battery-powered instrumentation where current consumption is important.
Analog Devices describes the LT1014 as the first precision quad operational amplifier that upgrades designs using the industry-standard 14-pin DIP configuration associated with LM324, LM348, OP-11, and 4156 devices. The LT1014DSW places four precision amplifiers in a 16-lead SO package. Compared with the referenced older quad devices, the LT1014 family emphasizes precision offset and drift characteristics, low noise, high gain, and low supply current while retaining a familiar quad operational-amplifier organization.
Typical applications include battery-powered precision instrumentation, strain-gauge signal conditioners, thermocouple amplifiers, instrumentation-amplifier input stages, 4 mA to 20 mA current-loop transmitters, multiple-limit threshold detectors, and active filters. Multiple independent channels can process several sensor signals while sharing supply filtering and board space. In active filters, the four channels may implement cascaded stages or parallel signal paths, provided each amplifier remains inside its specified common-mode and output limits.
Designers should verify input common-mode range, output swing, supply headroom, stability with the selected load capacitance, and offset requirements against the application. Decoupling capacitors should be placed close to the supply pins, while precision feedback and gain-setting resistors should be selected for the required noise and temperature-drift performance. The LT1014DSW is appropriate when low noise, low supply current, and four precision channels are more important than the lower cost or simplicity of a general-purpose amplifier.
直接替换替代料: LT1014DSW ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号: LT1014DSW (相同外形与封装尺寸) ——差异在于 Amplifier Type, Low-Voltage Noise, Mounting Type, Number of Amplifiers, Package.
LT1014ISW
✅ 直接替换联系询价
查看数据手册 →LT1014ASW
✅ 直接替换 ⚠️ 规格未核验📋 参考替代料(不在目录中)
LT1014CSW
✅ 直接替换 ⚠️ 规格未核验📋 参考替代料(不在目录中)
LT1014DSW 最大额定值与电气特性
| Amplifier Type | Quad precision operational amplifier |
| Number of Amplifiers | 4 circuits |
| Supply Voltage Range | 5 V to 44 V |
| Single-Supply Operation | 5 V |
| Dual-Supply Operation | ±15 V |
| Guaranteed Maximum Supply Current | 500 uA |
| Low-Voltage Noise | 0.55 uV peak-to-peak at 0.1 Hz to 10 Hz |
| Current Noise Density | 0.07 pA/sqrt(Hz) |
| 封装 | 16-lead SO surface-mount package |
| 安装类型 | Surface Mount |
LT1014DSW 16-lead so surface-mount package 引脚配置指南
LT1014DSW(16-lead so surface-mount package 封装)的引脚配置。 该模拟元件具有输入、输出和电源引脚。请参阅制造商数据手册以了解失调调零、补偿和使能引脚配置。适用于信号调理和放大器电路。
暂无详细引脚数据: LT1014DSW.
请参阅 数据手册 以查看完整引脚配置。
典型应用
LT1014DSW 适用于 6 应用s: Battery-Powered Precision Instrumentation, Strain-Gauge Signal Conditioning, Thermocouple Amplification, 4 mA to 20 mA Current-Loop Transmitters, Precision Active Filters, Multiple-Limit Threshold Detection.
Battery-Powered Precision Instrumentation
The LT1014DSW fits battery-powered instrumentation because it combines four precision amplifier channels with a guaranteed maximum supply current of 500 uA. It can operate from a single 5 V rail, reducing the need for dual-supply conversion in portable measurement systems. Low-voltage noise of 0.55 uV peak-to-peak from 0.1 Hz to 10 Hz helps preserve small-signal resolution, while 0.07 pA per square-root hz current noise is useful with high-impedance sources. Designers can use separate channels for sensor conditioning, filtering, reference buffering, and output-stage functions, subject to common-mode and output-swing limits.
推荐
Strain-Gauge Signal Conditioning
The LT1014DSW is suitable for strain-gauge front ends that amplify small differential sensor voltages while requiring low input-referred noise and low supply consumption. Its 0.55 uV peak-to-peak low-frequency noise and 0.07 pA per square-root hz current-noise density reduce the electrical noise floor relative to many general-purpose amplifiers. Two channels can form instrumentation-amplifier functions, while the remaining channels can provide gain, active filtering, or reference buffering. Component selection for the input bias-current, common-mode range, offset drift, and output-swing requirements must be completed against the manufacturer specifications.
推荐
Thermocouple Amplification
The LT1014DSW fits low-level thermocouple amplification because thermocouple outputs can be only tens of microvolts per degree and therefore demand low offset, low noise, and stable gain. The device's 0.55 uV peak-to-peak noise from 0.1 Hz to 10 Hz is particularly relevant to slow temperature measurements with substantial low-frequency content. Four channels allow multiple thermocouples or auxiliary cold-junction and filtering functions to share a compact package. The actual error budget must also account for input offset voltage, temperature coefficient, common-mode range, resistor tolerance, and thermocouple connection parasitics.
推荐
4 mA to 20 mA Current-Loop Transmitters
The LT1014DSW supports 4 mA to 20 mA current-loop transmitter signal paths where low offset and low noise improve the accuracy of the measured control signal. Its low 500 uA maximum supply current and 5 V single-supply capability are useful for compact field transmitters. Individual channels can support current-loop drive, error amplification, filtering, or threshold functions. The amplifier must remain within its input common-mode range and output-swing limits at the operating supply voltage, and the output-current compliance and precision requirements of the complete transmitter need separate verification.
推荐
Precision Active Filters
The LT1014DSW is well suited to active-filter implementations that need four precision channels, low noise, and a wide supply range from 5 V to 44 V. Its channels can realize cascaded low-pass, high-pass, or band-pass sections when the required gain and phase margins are met. Low-voltage noise of 0.55 uV peak-to-peak is useful when filter output amplitude is small, while the 0.07 pA per square-root hz current-noise specification matters for high-source-impedance networks. Gain-setting resistors should be matched appropriately, and stability with real loads and stray capacitance should be evaluated in simulation and hardware.
推荐
Multiple-Limit Threshold Detection
The LT1014DSW can implement several independent precision threshold detectors in one 16-lead package, allowing one device to monitor different voltages or control levels. Each amplifier can compare a signal against a reference and provide an amplified or buffered threshold output. The low noise and low supply current support compact monitoring systems, while operation from a single 5 V supply simplifies power architecture. Comparator-like designs still require attention to input offset, common-mode limits, output logic levels, propagation behavior in amplifier operation, and resistor tolerances that determine the actual switching thresholds.
推荐
推荐产品汇总
工程参考数据: LT1014DSW ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | LT1014ISW | LT1014ASW | LT1014CSW |
|---|---|---|---|---|
| Package | SO-16 | SO-16 | SO-16 | SO-16 |
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices |
| Amplifier Count | 4 circuits | 4 circuits | 4 circuits | 4 circuits |
关键差异点
- Four precision channels in one compact SO-16 package (对比 LT1013DDRE4)
- Specified low-voltage noise for precision measurements (对比 LT1014ISW)
- Wide supply capability for single and dual rails (对比 LT1014ASW)
设计说明
Place the supply bypass capacitor close to the positive and ground pins, with a short return path that avoids shared copper resistance between sensitive amplifier channels. The LT1014DSW operates from a single 5 V supply or dual ±15 V rails, but the usable signal range still depends on common-mode and output-swing limits. Do not treat the full 5 V to 44 V supply capability as a guarantee that every input and output combination remains linear.
Use the manufacturer pin-description table and package drawing when assigning all 16 PCB connections. Keep high-impedance input nodes short, shield them from clock, relay, and switching-converter paths, and avoid routing them beneath switching nodes. Precision gain networks benefit from short, symmetric routing and stable reference grounding because PCB leakage and temperature gradients can otherwise undermine the benefit of low input-referred noise.
Do not substitute the dual LT1013 for the quad LT1014 without redesigning the channel assignments and signal path. The LT1013DDRE4 may appear in family comparisons, but it has two amplifiers rather than four and therefore is not a drop-in replacement. Likewise, confirm the temperature grade of any SO-16 LT1014 replacement against the ambient range and production requirements before approving the substitution.
合规信息
Compliance status for the exact LT1014DSW ordering code must be confirmed through current Analog Devices product documentation. The related LT1014DSW#PBF listing identifies a lead-free ordering option, but that status was not assigned to the unqualified LT1014DSW MPN.