Texas Instruments

MAX232EIDWG4 - Dual RS-232 Transceiver | Texas Instruments

N.º da peça: MAX232EIDWG4 ✓ Ativo
5 V Vdss 16-pin SOIC Package
MOQ: 1 |

MAX232EIDWG4 Visão geral

The Texas Instruments MAX232EIDWG4 is a dual RS-232 line-driver and receiver transceiver with two transmit channels, two receive channels, and IEC 61000-4-2 electrostatic-discharge protection. It operates from a single 5 V supply in a 16-pin SOIC package, with an industrial temperature range of -40°C to +85°C. The MAX232EIDWG4 is intended for systems that require bidirectional RS-232 communication over longer distances than TTL logic can support reliably.

An RS-232 transceiver is an interface IC that converts between single-ended TTL/CMOS logic and differential, bipolar RS-232 signals. Its line drivers convert outgoing logic levels into RS-232 levels, while its receivers convert incoming RS-232 signals into logic-compatible levels. The MAX232 family integrates the required charge-pump circuitry, drivers, and receivers, allowing a printed circuit board to implement two complete RS-232 channels without discrete level-shifting circuits.

The principal feature of the MAX232EIDWG4 is its dual-channel architecture, which provides two drivers and two receivers in one 16-pin SOIC package. Integrated IEC 61000-4-2 protection improves interface robustness in industrial environments where cables and connector signals may be exposed to electrostatic discharge. Its -40°C to +85°C operating range supports both commercial and industrial equipment, while the SOIC package supports conventional surface-mount assembly and automated inspection.

The device includes on-chip charge-pump circuitry for RS-232 signal generation, reducing the external component count compared with discrete driver designs. Charge-pump capacitors and supply bypass capacitors must be placed close to their associated pins to maintain stable operation. The SOIC footprint also requires consideration of lead pitch, board-edge clearance, and thermal performance when the transceiver is mounted near a power supply or in a densely routed enclosure.

Typical applications include industrial serial controllers, laboratory instruments, data acquisition equipment, configuration ports, and service interfaces. It is especially useful when a legacy RS-232 port must coexist with a modern controller operating at TTL logic levels. Two channels can also support separate transmit and receive paths, full-duplex communication, or multiple interfaces sharing one package.

For a new layout, follow the manufacturer datasheet pin-description table and recommended capacitor network exactly. Check the selected driver and receiver connections against the required RS-232 direction, grounding arrangement, and cable-side protection strategy. PCB creepage, isolation spacing, and exposed connector placement should be evaluated even when the IC itself includes ESD protection.

This page organizes the MAX232EIDWG4 specifications, verified sourcing links, structured alternatives, application guidance, and design checks into one engineering-focused reference. It helps distinguish package, temperature-range, protection, and channel-count considerations before committing the part to an RS-232 interface design.

Alternativas drop-in para MAX232EIDWG4 — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.

Variantes desta série

Modelos da mesma série compatíveis como drop-in com MAX232EIDWG4 (mesmo formato e footprint) — diferindo em Package, Product Type, Mounting Type, ESD Protection, Data Rate.

Analog Devices
Package: 16-SOIC (NSOIC, narrow body, 0.154" / 3.90 mm width)
Data Rate: 200 kbps
Comparar com MAX232EIDWG4 →
Texas Instruments
Product Type: Dual RS-232 driver/receiver with capacitive voltage generator
ESD Protection: ±2 kV
Data Rate: 120 kbit/s
Comparar com MAX232EIDWG4 →
Texas Instruments
Package: 16-pin PDIP
Product Type: Dual EIA-232 driver/receiver transceiver
Mounting Type: Through Hole
Comparar com MAX232EIDWG4 →

MAX232IDWG4

✅ Drop-In
Texas Instruments
📦 16-pin SOIC
Dual RS-232 line driver and receiver interface IC · 5 V · 2 · 2 · 120 kbit/s · Approximately ±9 V · ±30 V · 500 mV

Consulte o preço

Ver ficha técnica →

MAX232IDWR

✅ Drop-In
📦 16-pin SOIC
Same dual 120 kbit/s-class MAX232 architecture and 16-pin SOIC footprint; IEC 61000-4-2 protection is absent from the listed IDWR comparison.

📋 Alternativa de referência (fora do catálogo)

MAX232DW

✅ Drop-In
Texas Instruments
📦 16-pin SOIC
Dual RS-232 driver/receiver with capacitive voltage generator · 2 · 2 · 120 kbit/s · 5 V · 4.5 V to 5.5 V · Approximately ±9 V · ±30 V

Consulte o preço

Ver ficha técnica →

MAX232IN

✅ Drop-In
Texas Instruments
📦 16-pin SOIC
Dual EIA-232 driver/receiver transceiver · 2 · 2 · 5 V · 120 kbit/s · +9 V and -9 V · -30 V to +30 V · 1.3 V typical

Consulte o preço

Ver ficha técnica →

MAX232ACSE+T

✅ Drop-In
Analog Devices
📦 16-pin SOIC
RS-232 Transceiver (2 Driver / 2 Receiver) · 200 kbps · 4.5 V to 5.5 V · 2 · 2 · Full · ±30 V (HBM ESD tolerance on RS-232 inputs) · 0 °C to +70 °C (C grade)

Consulte o preço

Ver ficha técnica →

MAX232EIDWG4 Especificações

Product Type Dual RS-232 line-driver and receiver transceiver
Number of Drivers 2
Number of Receivers 2
Channel Count 2 transmit and 2 receive channels
Interface Standard RS-232 / EIA-232
Nominal Supply Voltage 5 V
ESD Protection IEC 61000-4-2
Faixa de temperatura de operação -40°C to +85°C
Temperature Grade Industrial
Encapsulamento 16-pin SOIC
Package Code DW
Terminal Count 16
Tipo de montagem Surface mount
Lead Form Gull wing
Package Shape Rectangular

Configuração de pinos do MAX232EIDWG4

SOIC-16 Package Pinout Diagram SOIC-16 16-pin, 3.9x9.9mm, P1.27mm, JEDEC MS-012. 1 16 2 15 3 14 4 13 5 12 6 11 7 10 8 9 SOIC-16
Pino 1 R1OUT — Receiver 1 output
Pino 2 R2OUT — Receiver 2 output
Pino 3 R2IN — Receiver 2 input
Pino 4 R1IN — Receiver 1 input
Pino 5 V- — Negative charge-pump output
Pino 6 V+ — Positive charge-pump output
Pino 7 T1OUT — Transmitter 1 output
Pino 8 T2OUT — Transmitter 2 output
Pino 9 T2IN — Transmitter 2 input
Pino 10 T1IN — Transmitter 1 input
Pino 11 GND — Ground
Pino 12 VCC — Positive supply
Pino 13 NC — Not connected
Pino 14 NC — Not connected
Pino 15 GND — Ground
Pino 16 VCC — Positive supply

Aplicações típicas

MAX232EIDWG4 é adequado para 6 aplicaçãos: Industrial Serial Controllers, Laboratory Test Equipment, Data Acquisition Equipment, Configuration and Service Ports, Communication Port Converters, LED Lighting Controllers.

🏭

Industrial Serial Controllers

The MAX232EIDWG4 fits industrial controllers that must translate between a low-voltage digital controller and an RS-232 field interface. Its two drivers and two receivers support two communication paths in one 16-pin SOIC, while the -40°C to +85°C operating range covers temperature-conditioned equipment. IEC 61000-4-2 protection strengthens the line interface against electrostatic discharge encountered during servicing or human contact. Place the charge-pump capacitors close to their pins and connect the logic and RS-232 sides according to the manufacturer datasheet.

🔧

Laboratory Test Equipment

The MAX232EIDWG4 is suitable for laboratory instruments and automated test systems that retain an RS-232 control port. Two independent receive channels can accept command or status signals, while two transmit channels support control and data output. The 16-pin SOIC package simplifies assembly in compact instruments, and the -40°C to +85°C range supports industrial test environments. IEC 61000-4-2 protection is useful when users attach and disconnect external cables, although enclosure grounding and additional surge protection remain system-level requirements.

📡

Data Acquisition Equipment

The MAX232EIDWG4 can provide legacy PC and controller connectivity for data-acquisition equipment that uses an RS-232 command channel. The transceiver's dual drivers and receivers allow bidirectional configuration and status communication without requiring separate line-driver packages. Its 5 V nominal operation is compatible with common embedded-control rails, while the industrial temperature range supports equipment deployed outside controlled offices. Respect the manufacturer datasheet layout for charge-pump components and keep the cable-side connector away from sensitive analog acquisition circuits.

💻

Configuration and Service Ports

The MAX232EIDWG4 is an appropriate choice for configuration, programming, and service ports that must remain accessible through an RS-232 connector. Its dual transmit and receive channels support bidirectional service commands and status reporting in one compact package. IEC 61000-4-2 protection improves reliability when service cables are connected in uncontrolled environments, while the -40°C to +85°C range supports industrial equipment. Ensure that exposed connector pins are properly referenced to the board ground and follow the datasheet output-enable and supply arrangements.

🌐

Communication Port Converters

The MAX232EIDWG4 can form the electrical interface stage of a communication-port converter between a modern TTL-based controller and an RS-232 device. Two channels allow either full-duplex communication on one connector or the reuse of one package for separate ports. Its 5 V supply requirement and integrated charge pump reduce external circuitry compared with discrete RS-232 designs. IEC 61000-4-2 protection is valuable in portable or field-adjacent equipment, although the final product still needs connector shielding, grounding, and cable-level surge mitigation.

💡

LED Lighting Controllers

The MAX232EIDWG4 can add an RS-232 service interface to LED lighting controllers used in architectural, industrial, or stage-lighting systems. Two receive channels can accept operating commands and configuration updates, while the transmit channels provide status or error feedback. The -40°C to +85°C operating range suits temperature-variable installations, and the 16-pin SOIC is straightforward to assemble in production. Keep the interface section away from high-current LED drivers and power-conversion inductors to minimize coupling into the RS-232 receiver path.

Resumo dos produtos recomendados

What is the MAX232EIDWG4?
The MAX232EIDWG4 is a Texas Instruments dual RS-232 transceiver containing two line drivers and two receivers in a 16-pin SOIC package. It converts between TTL-compatible logic and RS-232 signal levels while supporting a single 5 V supply. According to the manufacturer datasheet, the E variant includes IEC 61000-4-2 electrostatic-discharge protection for improved interface robustness.
What are the key specifications of MAX232EIDWG4?
The MAX232EIDWG4 provides two RS-232 drivers, two RS-232 receivers, a 16-pin SOIC package, a 5 V nominal supply, IEC 61000-4-2 protection, and an operating range of -40°C to +85°C. According to the Texas Instruments product description and manufacturer datasheet, it is a dual EIA-232 line-driver and receiver suitable for industrial serial-interface equipment.
Where can I download the MAX232EIDWG4 datasheet PDF?
The MAX232EIDWG4 datasheet and technical documents can be reached through the linked Texas Instruments product listing on DigiKey. Select the Documents tab to open or download the manufacturer datasheet. The manufacturer datasheet should be used for the definitive pin table, recommended charge-pump capacitors, electrical limits, and application schematic.
Where is the MAX232EIDWG4 pinout located?
The MAX232EIDWG4 pinout is documented in the pin-description table of the Texas Instruments manufacturer datasheet. The device uses a 16-pin SOIC with gull-wing leads, and its external capacitor connections and supply pins must be assigned exactly as shown there. Use the package drawing alongside the pin table when assigning PCB tracks.
What is the best drop-in replacement for MAX232EIDWG4?
MAX232IDWG4 is the closest listed drop-in replacement because it retains the same Texas Instruments MAX232 function, 16-pin SOIC package, dual RS-232 architecture, 5 V operation, and 120 kbit/s data-rate class identified in the comparison material. According to the manufacturer datasheet, the E designation adds ESD protection, so verify the exact protection requirements before accepting the non-E variant as equivalent.
Can MAX232IDWG4 replace MAX232EIDWG4?
MAX232IDWG4 can serve as a board-level replacement when its electrical ratings meet the system requirement and additional ESD protection is not essential. Both devices use the MAX232 16-pin SOIC architecture, but the MAX232EIDWG4 provides IEC 61000-4-2 protection according to the Texas Instruments product description. Review the manufacturer datasheets before changing the approved component.
Is the MAX232EIDWG4 the same as MAX232IDWG4?
No. The MAX232EIDWG4 and MAX232IDWG4 use the same broad MAX232 dual-transceiver architecture and 16-pin SOIC package, but the E version adds IEC 61000-4-2 protection. According to the manufacturer datasheets, the primary distinction is the protection feature and its associated device qualification. Select the exact suffix required by the design specification.
MAX232EIDWG4 vs MAX232IDWR: which should I choose?
Choose MAX232EIDWG4 when the interface requires the E-version ESD protection, and choose MAX232IDWR when the design specification does not require that feature. Both parts are identified as MAX232-family RS-232 transceivers in 16-pin SOIC packages. The exact ordering-code suffix and temperature grade should still be checked against the approved BOM.
When should I choose MAX232EIDWG4 over MAX232DW?
Choose MAX232EIDWG4 when the RS-232 port requires IEC 61000-4-2 ESD protection and an industrial -40°C to +85°C operating range. The MAX232DW is identified as a 16-terminal MAX232 transceiver in the comparison listings, but its protection and qualification details may differ. Use the manufacturer datasheets to confirm suitability for the target environment.
Is MAX232EIDWG4 suitable for industrial serial communication?
The MAX232EIDWG4 is suitable for industrial serial-interface applications that require a -40°C to +85°C operating range and IEC 61000-4-2 ESD protection. According to the Texas Instruments product description, it is a dual RS-232 driver and receiver in a 16-pin SOIC package. Connector grounding, cable routing, and enclosure-level surge protection still require system-level review.
What is the best Analog Devices equivalent for MAX232EIDWG4?
The Analog Devices MAX232 family is the relevant cross-reference family because it provides dual RS-232 drivers and receivers for the same 5 V serial-interface use case. A specific alternative should be selected only after matching the 16-pin pinout, data rate, temperature grade, and ESD rating against the Texas Instruments manufacturer datasheet. Contact the Request a Quote form for assistance with the exact substitution review.
Where can I buy MAX232EIDWG4 online?
Use the Request a Quote form on this page to request MAX232EIDWG4 availability, current lead time, and order details from XAIPART. The form allows buyers to specify quantity and delivery requirements without relying on static pricing. The manufacturer lists the component as an active dual RS-232 transceiver in a 16-pin SOIC package.
What is the price of MAX232EIDWG4?
Current MAX232EIDWG4 pricing is obtained through the Request a Quote form on this page because commercial terms and availability can change with order volume and market conditions. The form is the appropriate route for unit-price confirmation and quantity-break review. Technical selection should continue to use the manufacturer datasheet rather than transient commercial information.
What is the lead time for MAX232EIDWG4?
Request the current MAX232EIDWG4 lead time through the Request a Quote form on this page. Include the required quantity, target delivery date, and preferred packaging so the sourcing request can be evaluated accurately. The component is identified by Texas Instruments as a 16-pin SOIC dual RS-232 transceiver with industrial-temperature operation.
Is MAX232EIDWG4 in stock?
Use the Request a Quote form on this page to check current MAX232EIDWG4 stock and allocation status. Provide your required quantity and target schedule so the order can be matched to the appropriate supply channel. The part is an active Texas Instruments MAX232-family product with a -40°C to +85°C operating range.
How should MAX232EIDWG4 be placed on a PCB?
Place the MAX232EIDWG4 charge-pump and bypass capacitors close to their numbered pins, route the logic-side traces away from exposed connector and cable-side nets, and follow the manufacturer datasheet layout exactly. Because the IC provides line-side ESD protection rather than complete surge isolation, maintain appropriate clearance to high-energy conductors. Confirm package orientation against the pin-1 marker.

Dados de referência de engenharia para MAX232EIDWG4 — comparação, orientação de projeto e informações de conformidade.

Guia de seleção

Choose MAX232EIDWG4 when the board requires a dual RS-232 interface with a 16-pin SOIC footprint, a -40°C to +85°C operating range, and IEC 61000-4-2 protection. MAX232IDWG4 or MAX232IDWR are practical board-level options when the same MAX232 architecture is needed but the E-version protection feature is not required. MAX232DW can be considered for a standard 16-terminal MAX232 design after its protection and qualification details are confirmed. MAX232IN is appropriate when an industrial MAX232 ordering option aligns with the product specification. For all alternatives, verify the manufacturer pin table, data rate, supply limits, temperature grade, and approved ordering suffix. MAX232ACSE+T may fit the same general dual-transceiver class, but its exact suffix-level characteristics should be reviewed before substitution. Avoid changing parts solely because the family and package names match; ESD performance and environmental qualification can determine whether a replacement is genuinely drop-in.

Comparação com alternativas

Parâmetro Este produto MAX232IDWG4 MAX232IDWR MAX232DW MAX232IN MAX232ACSE+T
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments
Package 16-pin SOIC 16-pin SOIC 16-pin SOIC 16-pin SOIC 16-pin SOIC 16-pin SOIC
Transceiver Configuration Dual driver and dual receiver Dual driver and dual receiver Dual driver and dual receiver Dual driver and dual receiver Dual driver and dual receiver Dual driver and dual receiver
Nominal Supply 5 V 5 V 5 V 5 V 5 V 5 V
Pin Count 16 16 16 16 16 16

Principais diferenciais

  • Integrated electrostatic-discharge protection (vs MAX232IDWG4)
  • Industrial-temperature RS-232 interface (vs MAX232IN)
  • Two complete communication channels in one package (vs MAX232DW)

Notas de projeto

Place all charge-pump and bypass capacitors close to their numbered MAX232EIDWG4 pins, with short ground returns and minimal loop area. Follow the manufacturer datasheet layout because incorrect capacitor connections or long charge-pump traces can reduce output voltage and increase radiated noise. Keep the SOIC orientation consistent with the pin-1 marker, and route connector-side nets away from adjacent clock, switching-power, and high-speed data traces.

Treat the RS-232 connector side as an electrically harsh environment even though the E version includes IEC 61000-4-2 protection. Return connector ground to the board ground through a short path, maintain separation from mains and high-current power wiring, and use chassis grounding or surge protection when cables leave the enclosure. ESD protection reduces electrostatic-discharge stress but does not replace a complete EMC and surge-protection strategy.

Do not substitute a MAX232 suffix without reviewing the exact pinout, temperature grade, data rate, and ESD rating. MAX232IDWG4, MAX232IDWR, MAX232DW, MAX232IN, and MAX232ACSE+T appear in cross-reference results for the same 16-pin SOIC family, but suffix differences can affect ordering codes and protection features. Retain the exact approved manufacturer part number whenever protection qualification is part of the system requirement.

Informações de conformidade

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Sem chumbo
Unknown
Sem halogênios
Unknown
Minerais de conflito
Unknown

The product description identifies IEC 61000-4-2 ESD protection and a -40°C to +85°C industrial temperature range. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status require confirmation from the manufacturer or an authoritative compliance document.

Dados verificados em: 2026-11-09 — dados verificados e curados pela equipe de engenharia de componentes da XAIPART

Buscas relacionadas

MAX232EIDWG4 datasheet MAX232EIDWG4 pinout MAX232EIDWG4 datasheet pdf Texas Instruments MAX232EIDWG4 MAX232EIDWG4 equivalent MAX232EIDWG4 replacement MAX232EIDWG4 vs MAX232IDWG4 MAX232EIDWG4 16-SOIC MAX232EIDWG4 IEC61000-4-2 MAX232EIDWG4 industrial RS232 MAX232EIDWG4 price MAX232EIDWG4 stock

Componentes & termos relacionados

Texas Instruments MAX232EIDWG4 MAX232IDWG4 MAX232IDWR MAX232DW MAX232IN MAX232ACSE+T RS-232 EIA-232 line transceiver line driver receiver interface IC semiconductor IEC 61000-4-2 electrostatic-discharge protection SOIC-16 gull-wing package surface mount charge-pump circuitry 5 V supply industrial temperature grade data acquisition serial communication
RFQ de cotação rápida
Preencha todos os detalhes — nossa equipe de vendas responderá em até 24 horas
Part number Fabricante Encapsulamento QTY Preço-alvo Total
✓
Cotação enviada!

Responderemos seu e-mail em até 24 horas

1
RFQ enviada
2
Cotação recebida
3
Pedido realizado
4
Pagamento
5
Enviado
6
Entregue
Ver detalhes da RFQ