MAX232EIDWG4 - Dual RS-232 Transceiver | Texas Instruments
MPN: MAX232EIDWG4 ✓ Hoạt độngMAX232EIDWG4 Tóm tắt
An RS-232 transceiver is an interface IC that converts between single-ended TTL/CMOS logic and differential, bipolar RS-232 signals. Its line drivers convert outgoing logic levels into RS-232 levels, while its receivers convert incoming RS-232 signals into logic-compatible levels. The MAX232 family integrates the required charge-pump circuitry, drivers, and receivers, allowing a printed circuit board to implement two complete RS-232 channels without discrete level-shifting circuits.
The principal feature of the MAX232EIDWG4 is its dual-channel architecture, which provides two drivers and two receivers in one 16-pin SOIC package. Integrated IEC 61000-4-2 protection improves interface robustness in industrial environments where cables and connector signals may be exposed to electrostatic discharge. Its -40°C to +85°C operating range supports both commercial and industrial equipment, while the SOIC package supports conventional surface-mount assembly and automated inspection.
The device includes on-chip charge-pump circuitry for RS-232 signal generation, reducing the external component count compared with discrete driver designs. Charge-pump capacitors and supply bypass capacitors must be placed close to their associated pins to maintain stable operation. The SOIC footprint also requires consideration of lead pitch, board-edge clearance, and thermal performance when the transceiver is mounted near a power supply or in a densely routed enclosure.
Typical applications include industrial serial controllers, laboratory instruments, data acquisition equipment, configuration ports, and service interfaces. It is especially useful when a legacy RS-232 port must coexist with a modern controller operating at TTL logic levels. Two channels can also support separate transmit and receive paths, full-duplex communication, or multiple interfaces sharing one package.
For a new layout, follow the manufacturer datasheet pin-description table and recommended capacitor network exactly. Check the selected driver and receiver connections against the required RS-232 direction, grounding arrangement, and cable-side protection strategy. PCB creepage, isolation spacing, and exposed connector placement should be evaluated even when the IC itself includes ESD protection.
This page organizes the MAX232EIDWG4 specifications, verified sourcing links, structured alternatives, application guidance, and design checks into one engineering-focused reference. It helps distinguish package, temperature-range, protection, and channel-count considerations before committing the part to an RS-232 interface design.
Bộ thay thế dễ dàng lắp đặt cho MAX232EIDWG4 — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với MAX232EIDWG4 (cùng hình factor và footprint) — khác nhau ở Package, Product Type, Mounting Type, ESD Protection, Data Rate.
MAX232IDWG4
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →MAX232IDWR
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
MAX232DW
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →MAX232IN
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →MAX232ACSE+T
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →MAX232EIDWG4 Thông số kỹ thuật
| Product Type | Dual RS-232 line-driver and receiver transceiver |
| Number of Drivers | 2 |
| Number of Receivers | 2 |
| Channel Count | 2 transmit and 2 receive channels |
| Interface Standard | RS-232 / EIA-232 |
| Nominal Supply Voltage | 5 V |
| ESD Protection | IEC 61000-4-2 |
| Khoảng nhiệt độ hoạt động | -40°C to +85°C |
| Temperature Grade | Industrial |
| Hộp | 16-pin SOIC |
| Package Code | DW |
| Terminal Count | 16 |
| Kiểu lắp đặt | Surface mount |
| Lead Form | Gull wing |
| Package Shape | Rectangular |
Cấu hình chân MAX232EIDWG4
| Chân 1 | R1OUT — Receiver 1 output |
| Chân 2 | R2OUT — Receiver 2 output |
| Chân 3 | R2IN — Receiver 2 input |
| Chân 4 | R1IN — Receiver 1 input |
| Chân 5 | V- — Negative charge-pump output |
| Chân 6 | V+ — Positive charge-pump output |
| Chân 7 | T1OUT — Transmitter 1 output |
| Chân 8 | T2OUT — Transmitter 2 output |
| Chân 9 | T2IN — Transmitter 2 input |
| Chân 10 | T1IN — Transmitter 1 input |
| Chân 11 | GND — Ground |
| Chân 12 | VCC — Positive supply |
| Chân 13 | NC — Not connected |
| Chân 14 | NC — Not connected |
| Chân 15 | GND — Ground |
| Chân 16 | VCC — Positive supply |
Ứng dụng tiêu biểu
MAX232EIDWG4 phù hợp cho 6 Áp dụngs: Industrial Serial Controllers, Laboratory Test Equipment, Data Acquisition Equipment, Configuration and Service Ports, Communication Port Converters, LED Lighting Controllers.
Industrial Serial Controllers
The MAX232EIDWG4 fits industrial controllers that must translate between a low-voltage digital controller and an RS-232 field interface. Its two drivers and two receivers support two communication paths in one 16-pin SOIC, while the -40°C to +85°C operating range covers temperature-conditioned equipment. IEC 61000-4-2 protection strengthens the line interface against electrostatic discharge encountered during servicing or human contact. Place the charge-pump capacitors close to their pins and connect the logic and RS-232 sides according to the manufacturer datasheet.
Được đề xuất
Laboratory Test Equipment
The MAX232EIDWG4 is suitable for laboratory instruments and automated test systems that retain an RS-232 control port. Two independent receive channels can accept command or status signals, while two transmit channels support control and data output. The 16-pin SOIC package simplifies assembly in compact instruments, and the -40°C to +85°C range supports industrial test environments. IEC 61000-4-2 protection is useful when users attach and disconnect external cables, although enclosure grounding and additional surge protection remain system-level requirements.
Được đề xuất
Data Acquisition Equipment
The MAX232EIDWG4 can provide legacy PC and controller connectivity for data-acquisition equipment that uses an RS-232 command channel. The transceiver's dual drivers and receivers allow bidirectional configuration and status communication without requiring separate line-driver packages. Its 5 V nominal operation is compatible with common embedded-control rails, while the industrial temperature range supports equipment deployed outside controlled offices. Respect the manufacturer datasheet layout for charge-pump components and keep the cable-side connector away from sensitive analog acquisition circuits.
Được đề xuất
Configuration and Service Ports
The MAX232EIDWG4 is an appropriate choice for configuration, programming, and service ports that must remain accessible through an RS-232 connector. Its dual transmit and receive channels support bidirectional service commands and status reporting in one compact package. IEC 61000-4-2 protection improves reliability when service cables are connected in uncontrolled environments, while the -40°C to +85°C range supports industrial equipment. Ensure that exposed connector pins are properly referenced to the board ground and follow the datasheet output-enable and supply arrangements.
Được đề xuất
Communication Port Converters
The MAX232EIDWG4 can form the electrical interface stage of a communication-port converter between a modern TTL-based controller and an RS-232 device. Two channels allow either full-duplex communication on one connector or the reuse of one package for separate ports. Its 5 V supply requirement and integrated charge pump reduce external circuitry compared with discrete RS-232 designs. IEC 61000-4-2 protection is valuable in portable or field-adjacent equipment, although the final product still needs connector shielding, grounding, and cable-level surge mitigation.
Được đề xuất
LED Lighting Controllers
The MAX232EIDWG4 can add an RS-232 service interface to LED lighting controllers used in architectural, industrial, or stage-lighting systems. Two receive channels can accept operating commands and configuration updates, while the transmit channels provide status or error feedback. The -40°C to +85°C operating range suits temperature-variable installations, and the 16-pin SOIC is straightforward to assemble in production. Keep the interface section away from high-current LED drivers and power-conversion inductors to minimize coupling into the RS-232 receiver path.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho MAX232EIDWG4 — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | MAX232IDWG4 | MAX232IDWR | MAX232DW | MAX232IN | MAX232ACSE+T |
|---|---|---|---|---|---|---|
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Package | 16-pin SOIC | 16-pin SOIC | 16-pin SOIC | 16-pin SOIC | 16-pin SOIC | 16-pin SOIC |
| Transceiver Configuration | Dual driver and dual receiver | Dual driver and dual receiver | Dual driver and dual receiver | Dual driver and dual receiver | Dual driver and dual receiver | Dual driver and dual receiver |
| Nominal Supply | 5 V | 5 V | 5 V | 5 V | 5 V | 5 V |
| Pin Count | 16 | 16 | 16 | 16 | 16 | 16 |
Bảo phân biệt quan trọng
- Integrated electrostatic-discharge protection (vsMAX232IDWG4)
- Industrial-temperature RS-232 interface (vsMAX232IN)
- Two complete communication channels in one package (vsMAX232DW)
Ghi chú thiết kế
Place all charge-pump and bypass capacitors close to their numbered MAX232EIDWG4 pins, with short ground returns and minimal loop area. Follow the manufacturer datasheet layout because incorrect capacitor connections or long charge-pump traces can reduce output voltage and increase radiated noise. Keep the SOIC orientation consistent with the pin-1 marker, and route connector-side nets away from adjacent clock, switching-power, and high-speed data traces.
Treat the RS-232 connector side as an electrically harsh environment even though the E version includes IEC 61000-4-2 protection. Return connector ground to the board ground through a short path, maintain separation from mains and high-current power wiring, and use chassis grounding or surge protection when cables leave the enclosure. ESD protection reduces electrostatic-discharge stress but does not replace a complete EMC and surge-protection strategy.
Do not substitute a MAX232 suffix without reviewing the exact pinout, temperature grade, data rate, and ESD rating. MAX232IDWG4, MAX232IDWR, MAX232DW, MAX232IN, and MAX232ACSE+T appear in cross-reference results for the same 16-pin SOIC family, but suffix differences can affect ordering codes and protection features. Retain the exact approved manufacturer part number whenever protection qualification is part of the system requirement.
Thông tin tuân thủ
The product description identifies IEC 61000-4-2 ESD protection and a -40°C to +85°C industrial temperature range. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status require confirmation from the manufacturer or an authoritative compliance document.