Maxim Integrated

MAX232EWE+T - 120kbps 5V RS-232 Transceiver | Maxim

N.º da peça: MAX232EWE+T ✓ Ativo
4.5 V to 5.5 V Vdss CCITT V.28 and V.24 Rds(on) 16-pin wide SOIC Package
MOQ: 1 |

MAX232EWE+T Visão geral

The Maxim Integrated MAX232EWE+T is a +5 V-powered, dual-driver and dual-receiver RS-232 transceiver supporting data rates up to 120 kbps in a 16-pin wide SOIC package. It provides two transmit channels and two receive channels for bidirectional serial interfaces while generating the positive and negative voltages required by RS-232 from a single 5 V supply.

An RS-232 transceiver is an interface IC that converts low-voltage CMOS or TTL logic signals into RS-232 levels and converts incoming RS-232 signals back into logic-compatible levels. It belongs to the interface IC hierarchy and is commonly placed between a host controller, microcontroller, or data-processing equipment and an external RS-232 port. Unlike a direct TTL connection, the MAX232EWE+T adds voltage-level translation, noise tolerance, and standard-compliant line signaling.

The device supports a 4.5 V to 5.5 V supply range and data rates up to 120 kbps. Its two drivers and two receivers are intended for EIA/TIA-232E, V.28, and V.24 interfaces. The integrated charge-pump circuitry eliminates the need for an external positive supply, while external capacitors provide the voltage multiplication and supply filtering required by the device.

The MAX232 family uses bipolar charge-pump circuitry to translate a 5 V input into approximately positive and negative RS-232 output levels. Receiver inputs are designed to detect the corresponding negative-going RS-232 signals, while the drivers provide the required level shifting and signal conditioning. Because the interface operates through voltage conversion rather than differential signaling, it is intended for point-to-point RS-232 connections rather than long multidrop networks.

Typical uses include serial service ports, industrial control links, configuration interfaces, test equipment, and legacy peripheral connections. Two transmit and two receive channels can support one hardware handshake flow or two independent unidirectional links. The 120 kbps capability also makes the device suitable for moderate-rate data links where legacy RS-232 equipment must interoperate with newer control electronics.

PCB design should place the charge-pump capacitors close to their associated pins and keep the RS-232 connector interface path away from sensitive analog or high-speed digital traces. Protection components may be added at exposed connector pins, but their capacitance and clamping voltage must be checked so they do not impair receiver detection or driver operation.

This product page combines the manufacturer interface specifications with practical PCB guidance, application-oriented design context, and a package-focused comparison. It helps engineers distinguish the wide-SOIC MAX232EWE+T from temperature-grade, packing-code, narrow-SOIC, and functionally similar interface devices that may not be drop-in replacements for an existing layout.

Alternativas drop-in para MAX232EWE+T — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.

Variantes desta série

Modelos da mesma série compatíveis como drop-in com MAX232EWE+T (mesmo formato e footprint) — diferindo em Product Type, Interface Standard, Package.

Analog Devices
Product Type: RS-232 transceiver
Comparar com MAX232EWE+T →
Analog Devices
Product Type: RS-232 line driver/receiver transceiver
Interface Standard: RS-232; EIA/TIA-232E and V.28/V.24 family application
Comparar com MAX232EWE+T →
Analog Devices
Product Type: RS-232 line-driver and receiver transceiver
Interface Standard: EIA/TIA-232E, V.28, and V.24
Package: 16-pin wide SOIC (WSOIC)
Comparar com MAX232EWE+T →
Maxim Integrated
Product Type: Dual RS-232 transmitter/receiver interface IC
Interface Standard: RS-232
Package: 16-pin SOIC

MAX232CWE+T

✅ Drop-In
Analog Devices
📦 16-pin wide SOIC
RS-232 line-driver and receiver transceiver · 2 · 2 · Full duplex · 120 kbps · +5 V · EIA/TIA-232E, V.28, and V.24 · 16-pin wide SOIC (WSOIC)

Consulte o preço

Ver ficha técnica →

MAX232EWE-T

✅ Drop-In
📦 16-pin wide SOIC
Retains the MAX232E electrical configuration and 16-pin wide-SOIC footprint while differing in the temperature-grade suffix; verify the rating before substitution.

📋 Alternativa de referência (fora do catálogo)

MAX232CWE+

✅ Drop-In
Analog Devices
📦 16-pin wide SOIC
RS-232 line driver/receiver transceiver · 4.5 V to 5.5 V · 2 · 2 · RS-232; EIA/TIA-232E and V.28/V.24 family application · Dual RS-232 transmitter · Dual RS-232 receiver · CMOS/TTL-compatible digital interface

Consulte o preço

Ver ficha técnica →

MAX232EWE+T Especificações

Product Type RS-232 transceiver interface IC
Transmit Channels 2 drivers
Receive Channels 2 receivers
Supply Voltage Range 4.5 V to 5.5 V
Maximum Data Rate 120 kbps
Interface Standard EIA/TIA-232E
Additional Standards CCITT V.28 and V.24
Logic Supply +5 V
Encapsulamento 16-pin wide SOIC
Package Width 7.50 mm
Package Length 0.295 inch
Contagem de pinos 16 pins
Tipo de montagem Surface mount

Guia de Configuração de Pinos do MAX232EWE+T 0.295 inch

Configuração de pinos para MAX232EWE+T (pacote 0.295 inch). A numeração dos pinos, funções e diagramas de conexão estão definidos no datasheet do fabricante. Consulte-o para o footprint exato e diretrizes de soldagem.

Diagrama de pinagem do pacote 0.295 inch para MAX232EWE+T

Nenhum dado detalhado de pinagem disponível para MAX232EWE+T.

Consulte a ficha técnica para a configuração completa dos pinos.

Aplicações típicas

MAX232EWE+T é adequado para 6 aplicaçãos: Industrial Controller Serial Port, Legacy Peripheral Configuration, Test and Measurement Equipment, Serial Service and Diagnostics, Embedded Data Acquisition Module, Networking and Router Management Port.

🏭

Industrial Controller Serial Port

The MAX232EWE+T is appropriate for an industrial controller that must communicate with legacy RS-232 equipment over a point-to-point cable. Its two driver channels and two receive channels support a full-duplex data path plus hardware handshaking, while operation up to 120 kbps covers typical service-port traffic. The 4.5 V to 5.5 V supply range also matches conventional 5 V logic systems. Place the charge-pump capacitors near the IC and route connector-side traces away from sensitive digital circuitry to reduce coupling. The 16-pin wide-SOIC package provides a practical surface-mount implementation for control boards where connector protection and grounding are handled separately.

🔧

Legacy Peripheral Configuration

The MAX232EWE+T can connect a modern controller to a legacy peripheral that retains an RS-232 configuration port. The receiver translates incoming negative-going RS-232 levels into logic signals, while the driver converts the controller's logic output into the required line voltage. Two drivers allow separate control and status paths when the peripheral uses RTS and CTS handshaking. The 120 kbps maximum data rate is more than adequate for configuration and diagnostic traffic. Designers should verify logic levels, provide connector-side protection, and observe the manufacturer's recommended capacitor layout to maintain signal timing and charge-pump behavior.

🖥️

Test and Measurement Equipment

The MAX232EWE+T is useful in test equipment that needs to exchange commands and results with a RS-232-controlled instrument. The two receive channels can collect separate status signals, and the two transmit channels can support command output plus flow control. With operation up to 120 kbps, the interface handles short command frames and moderate diagnostic data streams without requiring a higher-speed transceiver. A careful layout should keep the RS-232 traces away from analog inputs and reference circuitry. Grounding and cable transients remain system-level concerns, so connector protection should be selected with suitable capacitance and standoff characteristics.

🔧

Serial Service and Diagnostics

The MAX232EWE+T supports service consoles, maintenance ports, and diagnostic interfaces that rely on RS-232 rather than USB or Ethernet. The single +5 V supply simplifies implementation in equipment where negative RS-232 voltage generation is otherwise inconvenient. Two drivers and two receivers permit full-duplex messaging and optional hardware handshaking, while the 120 kbps limit suits command-oriented service protocols. Use short, properly referenced connections and place the external charge-pump capacitors directly beside the associated pins. The surface-mount wide-SOIC package also supports automated assembly in production equipment without requiring through-hole interconnects.

📡

Embedded Data Acquisition Module

The MAX232EWE+T can provide a robust wired interface between an embedded data-acquisition controller and an external instrument. Its two receive channels support separate data and status lines, and its two driver channels can carry commands and acknowledgments. The 120 kbps rate is suitable for many sensor, laboratory, and process-control links that transfer compact records rather than continuous high-bandwidth streams. Because RS-232 is point-to-point and uses voltage levels referenced to ground, the module should implement suitable cable grounding and connector protection. Decouple the 5 V rail locally and preserve the recommended charge-pump capacitor placement to avoid timing distortion.

🌐

Networking and Router Management Port

The MAX232EWE+T is applicable to management ports on routers, switches, and network appliances that expose an RS-232 console for configuration or diagnostics. The device supplies the required electrical translation between internal 5 V logic and the RS-232 console connector while supporting two receive paths for console data and hardware flow control. Its 120 kbps capability comfortably covers terminal interaction rates. Board-level implementation should reserve space for connector protection, maintain separation between the port and sensitive Ethernet or power sections, and verify the exact MAX232EWE+T suffix against environmental requirements. This arrangement preserves a conventional administrative interface without requiring a negative external supply.

What are the key specifications of MAX232EWE+T that engineers should know?
The MAX232EWE+T is a 5 V RS-232 transceiver with two drivers, two receivers, a 4.5 V to 5.5 V supply range, and operation up to 120 kbps. The Analog Devices manufacturer product page states that the MAX232E family meets EIA/TIA-232E and CCITT V.28 specifications, while the listed package is 16-pin wide SOIC. Its integrated interface functions make it suitable for translating between TTL or CMOS logic and physical RS-232 signals.
Where to buy MAX232EWE+T online?
The MAX232EWE+T can be requested through the Request a Quote form on this page. The part is listed for the exact MAX232EWE+T ordering code, so confirm the wide-SOIC package and +T tape-and-reel suffix when submitting the request. Current availability, quantity breaks, and lead time should be confirmed during quotation rather than inferred from a catalog listing.
What is the price of MAX232EWE+T?
The current price of MAX232EWE+T is shown through the Request a Quote form on this page. The orderable identifier is MAX232EWE+T, including the manufacturer suffix that distinguishes the temperature and packing configuration. Submit the required quantity and target package details with the request to obtain the current commercial terms.
What is the lead time for MAX232EWE+T?
The lead time for MAX232EWE+T depends on current inventory and the requested quantity, so request a quote on this page for confirmation. Specify the exact MAX232EWE+T suffix, the 16-pin wide-SOIC package, and the required production quantity. The manufacturer product page identifies the MAX232E family, but a shipment schedule must be tied to the current order.
Is MAX232EWE+T in stock?
Use the Request a Quote form on this page to obtain the current stock position for MAX232EWE+T. Marketplace and distributor pages may show changing inventory, so availability should be confirmed for the exact ordering code. Include your required quantity, target date, and whether the device must ship in the +T tape-and-reel configuration.
What is the difference between MAX232EWE+T and MAX232CWE+T?
Both MAX232EWE+T and MAX232CWE+T are listed as 16-pin RS-232 transceiver options, but their suffix codes can represent different temperature grades or orderable configurations. The cross-reference information identifies MAX232CWE+T as a similar device, while the comparison notes indicate that some electrical characteristics differ. Confirm the complete ordering codes and temperature ratings before treating it as a drop-in replacement.
Is MAX232EWE+T suitable for industrial control applications?
The MAX232EWE+T is technically suitable for moderate-rate RS-232 links because it supports up to 120 kbps and includes two drivers and two receivers. According to the Analog Devices manufacturer page, the family meets EIA/TIA-232E, V.28, and V.24 requirements. Its suitability for a specific industrial installation still depends on temperature grade, isolation needs, cable length, grounding, and connector-side protection.
When should I choose MAX232EWE+T instead of MAX232CWE+T?
Choose MAX232EWE+T when its exact temperature-grade and +T packing configuration matches the required operating environment and assembly process. Choose MAX232CWE+T only after checking its grade and electrical limits against the target design. Both devices use the wide-SOIC format in the relevant listings, but a matching footprint alone does not establish equivalent environmental performance or drop-in status.
What can replace MAX232EWE+T?
The closest identified same-family replacement is MAX232CWE+T because it is presented as a similar 16-pin wide-SOIC RS-232 transceiver. Verify its temperature range, supply limits, data rate, charge-pump capacitor values, and pin functions before substitution. The cross-reference information labels this relationship as similar rather than guaranteeing identical operation under every load and temperature condition.
Is MAX232EWE+T the same as MAX232CWE+T?
No, MAX232EWE+T and MAX232CWE+T should not be treated as identical without reviewing their suffix-specific specifications. The comparison data describes the functional characteristics as broadly consistent while noting differences in some electrical parameters. The safest selection method is to compare the manufacturer ordering tables for grade, package width, supply range, and interface performance.
Where to download the MAX232EWE+T datasheet PDF?
The official MAX232E documentation is available through the Analog Devices product page linked in the datasheet field on this page. It covers the MAX232E family, including the MAX232EWE wide-SOIC configuration. Use the pin-description and electrical-characteristics tables to assign PCB nets and verify charge-pump capacitor values, logic thresholds, and operating limits.
Where to find the MAX232EWE+T pinout?
Use the MAX232E manufacturer datasheet for the authoritative MAX232EWE+T pin description and wide-SOIC footprint. The device contains supply, ground, driver outputs, receiver inputs, logic inputs, charge-pump capacitor nodes, and enable-related functions distributed across 16 pins. Because the accessible search excerpts do not reproduce every pin name, use the official pin-description table when assigning tracks.
What is the best cross-brand equivalent for MAX232EWE+T?
A cross-brand equivalent is not designated here because the cross-reference excerpts identify replacement manufacturers but do not provide a specific pin-compatible MPN with verified electrical data. The MAX232 family cross-reference distinguishes direct drop-in replacements from functional equivalents, and those categories are not interchangeable. Use the MAX232E manufacturer datasheet as the baseline when evaluating a second source.
Can MAX232CWE+T replace MAX232EWE+T without PCB changes?
A PCB change is not expected from the listed 16-pin wide-SOIC package format, but complete drop-in compatibility still requires pin-by-pin and electrical verification. Check temperature grade, supply voltage, data rate, driver and receiver thresholds, shutdown or enable behavior, and external capacitor requirements. The cross-reference material presents MAX232CWE+T as similar, not as an unconditional replacement.
How does the MAX232EWE+T interface a microcontroller with an RS-232 port?
Connect the microcontroller transmit and receive logic lines to the MAX232EWE+T logic-side pins, route the driver outputs to the RS-232 connector, and route the connector receive pins to the receiver inputs. Install the manufacturer-specified charge-pump and supply capacitors close to the device. Because the MAX232EWE+T provides two drivers and two receivers, it can also support hardware handshaking or two separate links.

Dados de referência de engenharia para MAX232EWE+T — comparação, orientação de projeto e informações de conformidade.

Guia de seleção

Choose the MAX232EWE+T when a new design needs a 5 V RS-232 interface with two transmit and two receive channels in a 16-pin wide-SOIC package. It supports operation up to 120 kbps and conforms to the EIA/TIA-232E, V.28, and V.24 requirements identified for the MAX232E family. MAX232CWE+T is a relevant same-family option, but the temperature suffix and device-specific electrical limits must be checked before substitution. MAX232EWE-T can suit a different grade or delivery configuration, subject to environmental verification. MAX232CWE offers the same broad interface class and package format, but its ordering details should be matched carefully. For any replacement, compare pin functions, charge-pump capacitor values, logic thresholds, driver levels, receiver response, and operating temperature rather than relying only on the package outline.

Comparação com alternativas

Parâmetro Este produto MAX232CWE+T MAX232EWE-T MAX232CWE
Package 16-pin wide SOIC 16-pin wide SOIC 16-pin wide SOIC 16-pin wide SOIC
Brand Maxim Integrated Maxim Integrated Maxim Integrated Maxim Integrated
Product Type RS-232 transceiver RS-232 transceiver RS-232 transceiver RS-232 transceiver

Principais diferenciais

  • Two-driver, two-receiver interface in one package (vs MAX232CWE+T)
  • 120 kbps maximum signaling rate (vs MAX232EWE-T)
  • Single 5 V supply with integrated level translation (vs MAX232CWE)

Notas de projeto

Place the MAX232EWE+T charge-pump capacitors and 5 V bypass capacitor close to their associated package pins. Keep the charge-pump capacitor loop compact to reduce radiated noise and maintain clean internal supply generation. Route connector-side RS-232 traces away from clocks, ADC inputs, and precision analog nodes; when separation is impossible, use a grounded guard structure and verify the completed layout with signal-integrity measurements.

Do not assume that a shared SOIC designation guarantees interchangeability. Verify the package width, pin functions, temperature grade, supply limits, and external capacitor requirements for every suffix. In particular, a wide-SOIC MAX232EWE+T must not be placed on a footprint intended for a narrow-SOIC device. Confirm the manufacturer ordering table before approving a substitute in a new or revised PCB layout.

RS-232 is a point-to-point, single-ended interface, so cable routing, grounding, and connector protection influence reliability more than trace geometry at 120 kbps. Select protection devices with capacitance compatible with the receiver and driver timing requirements. Avoid long unterminated stub branches, maintain a consistent ground reference, and test the completed cable assembly for startup glitches and ground-loop-induced noise.

Informações de conformidade

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Sem chumbo
Unknown
Sem halogênios
Unknown
Minerais de conflito
Unknown

Compliance declarations were not present in the accessible product information. The +T ordering suffix identifies the tape-and-reel delivery configuration and does not by itself establish environmental qualification.

Dados verificados em: 2026-11-17 — dados verificados e curados pela equipe de engenharia de componentes da XAIPART

Buscas relacionadas

MAX232EWE+T datasheet MAX232EWE+T pinout MAX232EWE+T datasheet pdf MAX232EWE+T equivalent MAX232EWE+T replacement MAX232EWE+T cross reference MAX232EWE+T vs MAX232CWE+T MAX232EWE+T footprint MAX232EWE+T application circuit MAX232EWE+T price MAX232EWE+T stock Maxim Integrated MAX232EWE+T

Componentes & termos relacionados

Maxim Integrated Analog Devices MAX232EWE+T MAX232E MAX232CWE+T MAX232EWE-T MAX232CWE RS-232 transceiver RS-232 interface interface IC CMOS logic TTL logic EIA/TIA-232E CCITT V.28 V.24 16-pin wide SOIC SOIC package family surface-mount package charge-pump voltage converter RS-232 driver RS-232 receiver 120 kbps data rate 5 V power supply industrial control test and measurement
RFQ de cotação rápida
Preencha todos os detalhes — nossa equipe de vendas responderá em até 24 horas
Part number Fabricante Encapsulamento QTY Preço-alvo Total
✓
Cotação enviada!

Responderemos seu e-mail em até 24 horas

1
RFQ enviada
2
Cotação recebida
3
Pedido realizado
4
Pagamento
5
Enviado
6
Entregue
Ver detalhes da RFQ